In situ X-ray absorption spectroscopy data during formation of active Pt- and Pd-sites in functionalized UiO-67 metal-organic frameworks.

We report a series of Pd K-edge and Pt L 3-edge X-ray absorption spectra (XAS) collected in situ during thermal treatment of functionalized UiO-67-Pd and UiO-67-Pt metal-organic frameworks in inert and reducing atmospheres. We present raw synchrotron data from three subsequent experiments at different beamlines, normalized XAS spectra and k 2-weighted oscillatory χ(k) functions extracted from one of the datasets. Pd K-edge spectra were collected for the samples in 5% H2/He, 3% H2/He and pure He in the temperature range from room temperature (RT) to 450 °C. Pt L 3-edge were collected for the samples in 3% H2/He, 10% H2/He and pure He in the temperature range from RT to 300 °C. All spectra are reported together with the used atmosphere and temperature. For the analysis of all reported datasets, please see "Evolution of Pt and Pd species in functionalized UiO-67 metal-organic frameworks". Fourier-analysis of Pd K-edge is reported in "Formation and growth of Pd nanoparticles in UiO-67 MOF by in situ EXAFS".

Quo vadis niobium? Divergent coordination behavior of early-transition metals towards MOF-5.

Treatment of MOF-5 with NbCl4(THF)2 in acetonitrile leads to incorporation of Nb(iv) centers in a fashion that diverges from the established cation metathesis reactivity of this iconic material. A combination of X-ray absorption spectroscopy analysis and reactivity studies altogether supported by density functional theory computational studies document an unprecedented binding mode for the Zn4O(O2C-)6 secondary building units (SBUs), which in Nb(iv)-MOF-5 function as κ 2-chelating ligands for NbCl4 moieties, with no exchange of Zn2+ observed. This unusual reactivity expands the portfolio of post-synthetic modification techniques available for MOFs, exemplified here by MOF-5, and underscores the diverse coordination environments offered by this and potentially other MOFs towards heterometal species.

Operando X-ray absorption spectra and mass spectrometry data during hydrogenation of ethylene over palladium nanoparticles.

We report the series of Pd K-edge X-ray absorption spectra collected during hydrogenation of ethylene with variable ethylene/hydrogen ratio over carbon supported palladium nanoparticles. The data presented in this article includes normalized X-ray absorption spectra, k 2-weighted oscillatory χ(k) functions extracted from the extended X-ray absorption fine structure (EXAFS) and k 2-weighted Fourier-transformed EXAFS data, χ(R). Each spectrum is reported together with the hydrogen, ethylene and helium flow rates, adjusted during its collection. In addition, time evolution of the ratio of m/Z signals of 30 and 28 registered by online mass spectrometer is presented. The data analysis is reported in Bugaev et al., Catal. Today, 2019 [1].

Partial and Complete Substitution of the 1,4-Benzenedicarboxylate Linker in UiO-66 with 1,4-Naphthalenedicarboxylate: Synthesis, Characterization, and H2-Adsorption Properties.

We describe the synthesis and corresponding full characterization of the set of UiO-66 metal-organic frameworks (MOFs) with 1,4-benzenedicarboxylate (C6H4(COOH)2, hereafter H2BDC) and 1,4-naphthalenedicarboxylate (C10H6(COOH)2, hereafter H2NDC) mixed linkers with NDC contents of 0, 25, 50, and 100%. Their structural (powder X-ray diffraction, PXRD), adsorptive (N2, H2, and CO2), vibrational (IR/Raman), and thermal stability (thermogravimetric analysis, TGA) properties quantitatively correlate with the NDC content in the material. The UiO-66 phase topology is conserved at all relative fractions of BDC/NDC. The comparison between the synchrotron radiation PXRD and 77 K N2-adsorption isotherms obtained on the 50:50 BDC/NDC sample and on a mechanical mixture of the pure BDC and NDC samples univocally proves that in the mixed linkers of the MOFs the BDC and NDC linkers are shared in each MOF crystal, discarding the hypothesis of two independent phases, where each crystal contains only BDC or NDC linkers. The careful tuning of the NDC content opens a way for controlled alteration of the sorption properties of the resulting material as testified by the H2-adsorption experiments, showing that the relative ranking of the materials in H2 adsorption is different in different equilibrium-pressure ranges: at low pressures, 100NDC is the most efficient sample, while with increasing pressure, its relative performance progressively declines; at high pressures, the ranking follows the BDC content, reflecting the larger internal pore volume available in the MOFs with a higher fraction of smaller linkers. The H2-adsorption isotherms normalized by the sample Brunauer-Emmett-Teller specific surface area show, in the whole pressure range, that the surface-area-specific H2-adsorption capabilities in UiO-66 MOFs increase progressively with increasing NDC content. Density functional theory calculations, using the hybrid B3LYP exchange correlation functional and quadruple-ζ with four polarization functions (QZ4P) basis set, show that the interaction of H2 with the H2NDC linker results in an adsorption energy larger by about 15% with respect to that calculated for adsorption on the H2BDC linker.

Water as a structure-driving agent between the UiO-66 and MIL-140A metal-organic frameworks.

We report a careful investigation of a selective phase formation in the zirconium-terephthalic acid system during solvothermal synthesis, which could result in the UiO-66 (Zr6O6(OH)4(BDC)6) or MIL-140A (ZrO(BDC)) metal-organic frameworks (MOFs). The introduction of water varies the phase from MIL-140A to UiO-66 by producing at the nucleation stage tetragonal ZrO2 nanoparticles, where the local arrangement of Zr and O atoms is similar to that in the UiO-66 SBU.

Ti-Based Catalysts and Photocatalysts: Characterization and Modeling.

This perspective article aims to underline how cutting-edge synchrotron radiation spectroscopies such as extended X-ray absorption spectroscopy (EXAFS), X-ray absorption near edge structure (XANES), high resolution fluorescence detected (HRFD) XANES, X-ray emission spectroscopy (XES) and resonant inelastic X-ray scattering (RIXS) have played a key role in the structural and electronic characterization of Ti-based catalysts and photocatalysts, representing an important additional value to the outcomes of conventional laboratory spectroscopies (UV-Vis, IR, Raman, EPR, NMR etc.). Selected examples are taken from the authors research activity in the last two decades, covering both band-gap and shape engineered TiO2 materials and microporous titanosilicates (ETS-10, TS-1 and Ti-AlPO-5). The relevance of the state of the art simulation techniques as a support for experiments interpretation is underlined for all the reported examples.

Exact Stoichiometry of Ce xZr6- x Cornerstones in Mixed-Metal UiO-66 Metal-Organic Frameworks Revealed by Extended X-ray Absorption Fine Structure Spectroscopy.

Bimetallic Ce/Zr-UiO-66 metal-organic frameworks (MOFs) proved to be promising materials for various catalytic redox applications, representing, together with other bimetallic MOFs, a new generation of porous structures. However, no direct proof for the presence of both metals in a single cornerstone of UiO-type MOFs was reported so far. Employing element-selective X-ray absorption spectroscopy techniques herein, we demonstrate, for the first time, that our synthesis route allows obtaining Ce/Zr-UiO-66 MOFs with desired Ce content and bimetallic CeZr5 cornerstones. Performing multiple-edge extended X-ray absorption fine structure analysis, we determine the exact stoichiometry of the cornerstones, which explains the dependence of thermal and chemical stability of the materials on Ce content.

Autoluminescent Metal-Organic Frameworks (MOFs): Self-Photoemission of a Highly Stable Thorium MOF.

A novel thorium(IV) metal-organic framework (MOF), Th(2,6-naphtalenedicarboxylate)2, has been synthesized via solvothermal reaction of thorium nitrate and 2,6-naphtalendicarboxilyc acid. This compound shows a new structural arrangement with an interesting topology and an excellent thermal resistance, as the framework is stable in air up to 450 °C. Most notably, this MOF, combining the radioactivity of its metal center and the scintillation property of the ligand, has been proven capable of spontaneous photon emission.

Molecular Niobium Precursors in Various Oxidation States: An XAS Case Study.

Although X-ray absorption spectroscopy (XAS) has become an indispensable tool in characterization of solid-state materials, it is less of a staple in molecular chemistry of niobium. Scattering X-ray techniques remain relatively unexplored for the systematic study of molecular niobium compounds. Here, we use XAS to probe the niobium environment in commonly used Nb precursors in +V, +IV, and +III oxidation states. Apart from laying out the guidelines for identification of niobium oxidation states, we correlate our data with density functional theory models to provide further structural insight. Of particular note, we are able to shed light on the nature of the commonly used and catalytically competent NbCl3(DME), which had not been previously characterized structurally despite its prevalence in Nb chemistry.

The Nuclearity of the Active Site for Methane to Methanol Conversion in Cu-Mordenite: A Quantitative Assessment.

The direct conversion of methane to methanol (MTM) is a reaction that has the potential to disrupt a great part of the synthesis gas-derived chemical industry. However, despite many decades of research, active enough catalysts and suitable processes for industrial application are still not available. Recently, several copper-exchanged zeolites have shown considerable activity and selectivity in the direct MTM reaction. Understanding the nature of the active site in these materials is essential for any further development in the field. Herein, we apply multivariate curve resolution analysis of X-ray absorption spectroscopy data to accurately quantify the fraction of active Cu in Cu-MOR (MOR = mordenite), allowing an unambiguous determination of the active site nuclearity as a dicopper site. By rationalizing the compositional parameters and reaction conditions, we achieve the highest methanol yield per Cu yet reported for MTM over Cu-zeolites, of 0.47 mol/mol.

Cu-CHA - a model system for applied selective redox catalysis.

We review the structural chemistry and reactivity of copper-exchanged molecular sieves with chabazite (CHA) topology, as an industrially applied catalyst in ammonia mediated reduction of harmful nitrogen oxides (NH3-SCR) and as a general model system for red-ox active materials (also the recent results in the direct conversion of methane to methanol are considered). Notwithstanding the apparent structural simplicity of the material, a crystalline zeolite with only one crystallographically independent T site, the Cu-SSZ-13 catalyst reveals a high degree of complexity that has been decrypted by state of the art characterization tools. From the reviewed data, the following important aspects in the understanding of the Cu-SSZ-13 catalyst clearly emerged: (i) the structural dynamics of the Cu-species require precise control of the environmental conditions during activation and characterization; (ii) the availability of a large library of well-defined catalysts with different Si/Al and Cu/Al compositional ratios is key in unravelling the red-ox properties of the active Cu sites; (iii) a multi-technique approach is required, combining complementary techniques able to provide independent structural, electronic and vibrational information; (iv) synchrotron radiation based techniques (EXAFS, XANES, XES and time-resolved powder XRD) played a relevant role; (v) operando methodology (possibly supported by advanced chemometric approaches) is essential in obtaining structure-reactivity relations; (vi) the support of theoretical studies has been indispensable for the interpretation of the experimental output from characterization and for a critical assessment of mechanistic models. The old literature that classified Cu-exchanged zeolites in the category of single-site catalysts has been partially disproved by the recent advanced studies where it has been shown that the active site in the low temperature NH3-SCR catalyst is a mobile Cu-molecular entity that "lives in symbiosis" with an inorganic solid framework. Only in the high temperature NH3-SCR regime do the mobile Cu-species lose their ligands and find docking sites at the internal walls of the zeolite framework, thus reflecting the idea of a single-site catalyst. After a brief introduction, the review is divided into three main parts devoted to characterization (Section 2), reactivity (Section 3), and industrial applications (Section 4), followed by some concluding remarks and providing a perspective of the field.

Time-resolved operando studies of carbon supported Pd nanoparticles under hydrogenation reactions by X-ray diffraction and absorption.

The formation of palladium hydride and carbide phases in palladium-based catalysts is a critical process that changes the catalytic performance and selectivity of the catalysts in important industrial reactions, such as the selective hydrogenation of alkynes or alkadienes. We present a comprehensive study of a 5 wt% carbon supported Pd nanoparticle (NP) catalyst in various environments by using in situ and operando X-ray absorption spectroscopy and diffraction, to determine the structure and evolution of palladium hydride and carbide phases, and their distribution throughout the NPs. We demonstrate how the simultaneous analysis of extended X-ray absorption fine structure (EXAFS) spectra and X-ray powder diffraction (XRPD) patterns allows discrimination between the inner "core" and outer "shell" regions of the NP during hydride phase formation at different temperatures and under different hydrogen pressures, indicating that the amount of hydrogen in the shell region of the NP is lower than that in the core. For palladium carbide, advanced analysis of X-ray absorption near-edge structure (XANES) spectra allows the detection of Pd-C bonds with carbon-containing molecules adsorbed at the surface of the NPs. In addition, H/Pd and C/Pd stoichiometries of PdHx and PdCy phases were obtained by using theoretical modelling and fitting of XANES spectra. Finally, the collection of operando time-resolved XRPD patterns (with a time resolution of 5 s) allowed the detection, during the ethylene hydrogenation reaction, of periodic oscillations in the NPs core lattice parameter, which were in phase with the MS signal of ethane (product) and in antiphase with the MS signal of H2 (reactant), highlighting an interesting direct structure-reactivity relationship. The presented studies show how a careful combination of X-ray absorption and diffraction can differentiate the structure of the core, shell and surface of the palladium NPs under working conditions and prove their relevant roles in catalysis.

Operando study of palladium nanoparticles inside UiO-67 MOF for catalytic hydrogenation of hydrocarbons.

Functionalization of metal-organic frameworks with metal nanoparticles (NPs) is a promising way for producing advanced materials for catalytic applications. We present the synthesis and in situ characterization of palladium NPs encapsulated inside a functionalized UiO-67 metal-organic framework. The initial structure was synthesized with 10% of PdCl2bpydc moieties with grafted Pd ions replacing standard 4,4'-biphenyldicarboxylate linkers. This material exhibits the same high crystallinity and thermal stability of standard UiO-67. Formation of palladium NPs was initiated by sample activation in hydrogen and monitored by in situ X-ray powder diffraction and X-ray absorption spectroscopy (XAS). The reduction of PdII ions to Pd0 occurs above 200 °C in 6% H2/He flow. The formed palladium NPs have an average size of 2.1 nm as limited by the cavities of UiO-67 structure. The resulting material showed high activity towards ethylene hydrogenation. Under reaction conditions, palladium was found to form a carbide structure indicated by operando XAS, while formation of ethane was monitored by mass spectroscopy and infra-red spectroscopy.

Unravelling the Redox-catalytic Behavior of Ce4+ Metal-Organic Frameworks by X-ray Absorption Spectroscopy.

The introduction of Ce4+ as a structural cation has been shown to be a promising route to redox active metal-organic frameworks (MOFs). However, the mechanism by which these MOFs act as redox catalysts remains unclear. Herein, we present a detailed study of the active site in [Ce6 O4 (OH)4 ]-based MOFs such as Ce-UiO-66, involved in the aerobic oxidation of benzyl alcohol, chosen as a model redox reaction. X-ray absorption spectroscopy (XAS) data confirm the reduction of up to one Ce4+ ion per Ce6 cluster with a corresponding outwards radial shift due to the larger radius of the Ce3+ cation, while not compromising the structural integrity of the framework, as evidenced by powder X-ray diffraction. This unambiguously demonstrates the involvement of the metal node in the catalytic cycle and explains the need for 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) as a redox mediator to bridge the gap between the one-electron oxidation of the Ce4+ /Ce3+ couple and the two-electron alcohol oxidation. Finally, an improved catalytic system with Ce-MOF-808 and TEMPO was developed which outperformed all other tested Ce4+ -MOFs.

A Systematic Study of Isomorphically Substituted H-MAlPO-5 Materials for the Methanol-to-Hydrocarbons Reaction.

Substituting metals for either aluminum or phosphorus in crystalline, microporous aluminophosphates creates Brønsted acid sites, which are well known to catalyze several key reactions, including the methanol to hydrocarbons (MTH) reaction. In this work, we synthesized a series of metal-substituted aluminophosphates with AFI topology that differed primarily in their acid strength and that spanned a predicted range from high Brønsted acidity (H-MgAlPO-5, H-CoAlPO-5, and H-ZnAlPO-5) to medium acidity (H-SAPO-5) and low acidity (H-TiAlPO-5 and H-ZrAlPO-5). The synthesis was aimed to produce materials with homogenous properties (e.g. morphology, crystallite size, acid-site density, and surface area) to isolate the influence of metal substitution. This was verified by extensive characterization. The materials were tested in the MTH reaction at 450 °C by using dimethyl ether (DME) as feed. A clear activity difference was found, for which the predicted stronger acids converted DME significantly faster than the medium and weak Brønsted acidic materials. Furthermore, the stronger Brønsted acids (Mg, Co and Zn) produced more light alkenes than the weaker acids. The weaker acids, especially H-SAPO-5, produced more aromatics and alkanes, which indicates that the relative rates of competing reactions change upon decreasing the acid strength.

Effect of Molecular Guest Binding on the d-d Transitions of Ni2+ of CPO-27-Ni: A Combined UV-Vis, Resonant-Valence-to-Core X-ray Emission Spectroscopy, and Theoretical Study.

We used Ni K-edge resonant-valence-to-core X-ray emission spectroscopy (RVtC-XES, also referred to as direct RIXS), an element-selective bulk-sensitive synchrotron-based technique, to investigate the electronic structure of the CPO-27-Ni metal-organic framework (MOF) upon molecular adsorption of significant molecular probes: H2O, CO, H2S, and NO. We compare RVtC-XES with UV-vis spectroscopy, and we show that the element selectivity of RVtC-XES is of strategic significance to observe the full set of d-d excitations in Ni2+, which are partially overshadowed by the low-energy π-π* transitions of the Ni ligands in standard diffuse-reflectance UV-vis experiments. Our combined RVtC-XES/UV-vis approach provides access to the whole set of d-d excitations, allowing us a complete discussion of the changes undergone by the electronic configuration of the Ni2+ sites hosted within the MOF upon molecular adsorption. The experimental data have been interpreted by multiplet ligand-field theory calculations based on Wannier orbitals. This study represents a step further in understanding the ability of the CPO-27-Ni MOFs in molecular sorption and separation applications.