Fibrous TiO2 Alternatives for Semiconductor-Based Catalysts for Photocatalytic Water Remediation Involving Organic Contaminants.

Water decontamination remains a challenge in several developed and developing countries. Affordable and efficient approaches are needed urgently. In this scenario, heterogeneous photocatalysts appear as one of the most promising alternatives. This justifies the extensive attention that semiconductors, such as TiO2, have gained over the last decades. Several studies have evaluated their efficiency for environmental applications; however, most of these tests rely on the use of powder materials that have minimal to no applicability for large-scale applications. In this work, we investigated three fibrous TiO2 photocatalysts, TiO2 nanofibers (TNF), TiO2 on glass wool (TGW), and TiO2 in glass fiber filters (TGF). All materials have macroscopic structures that can be easily separated from solutions or that can work as fixed beds under flow conditions. We evaluated and compared their ability to bleach a surrogate dye molecule, crocin, under batch and flow conditions. Using black light (UVA/visible), our catalysts were able to bleach a minimum of 80% of the dye in batch experiments. Under continuous flow experiments, all catalysts could decrease dye absorption under shorter irradiation times: TGF, TNF, and TGW could, respectively, bleach 15, 18, and 43% of the dye with irradiation times as short as 35 s. Catalyst comparison was based on the selection of physical and chemical criteria relevant for application on water remediation. Their relative performance was ranked and applied in a radar plot. The features evaluated here had two distinct groups, chemical performance, which related to the dye degradation, and mechanical properties, which described their applicability in different systems. This comparative analysis gives insights into the selection of the right flow-compatible photocatalyst for water remediation.

Host-Guest Chemistry in Boron Nitride Nanotubes: Interactions with Polyoxometalates and Mechanism of Encapsulation.

Boron nitride nanotubes (BNNTs) are an emerging class of molecular container offering new functionalities and possibilities for studying molecules at the nanoscale. Herein, BNNTs are demonstrated as highly effective nanocontainers for polyoxometalate (POM) molecules. The encapsulation of POMs within BNNTs occurs spontaneously at room temperature from an aqueous solution, leading to the self-assembly of a POM@BNNT host-guest system. Analysis of the interactions between the host-nanotube and guest-molecule indicate that Lewis acid-base interactions between W═O groups of the POM (base) and B-atoms of the BNNT lattice (acid) likely play a major role in driving POM encapsulation, with photoactivated electron transfer from BNNTs to POMs in solution also contributing to the process. The transparent nature of the BNNT nanocontainer allows extensive investigation of the guest-molecules by photoluminescence, Raman, UV-vis absorption, and EPR spectroscopies. These studies revealed considerable energy and electron transfer processes between BNNTs and POMs, likely mediated via defect energy states of the BNNTs and resulting in the quenching of BNNT photoluminescence at room temperature, the emergence of new photoluminescence emissions at cryogenic temperatures (<100 K), a photochromic response, and paramagnetic signals from guest-POMs. These phenomena offer a fresh perspective on host-guest interactions at the nanoscale and open pathways for harvesting the functional properties of these hybrid systems.

Photosensitized selective semi-oxidation of tetrahydroisoquinoline: a singlet oxygen path.

Selective semi-oxidation of tetrahydroisoquinoline (THIQ) leads to a valuable dihydroisoquinoline (DHIQ) derivative via singlet oxygen photooxidation process. Typical photosensitisers (i.e., Ru complexes) can activate the reaction even under heterogeneous conditions that facilitate catalyst separation and reusability. In contrast to DHIQ, THIQ acts as an efficient singlet oxygen quencher driving the reaction selectivity. The reaction can also be facilitated by semiconductor catalysts such as MoCo@GW, a glass wool-based catalyst that is easy to separate and reuse and compatible with flow photochemistry. Its role is to mediate the formation of isoquinoline (IQ) and thus an in situ-generated singlet oxygen catalyst. Laser flash photolysis with NIR detection provides proof of the singlet oxygen mechanism proposed and rate constants for the key steps that mediate the oxidation.

Nitro to amine reductions using aqueous flow catalysis under ambient conditions.

A catalyst based on Pd on glass wool (Pd@GW) shows exceptional performance and durability for the reduction of nitrobenzene to aniline at room temperature and ambient pressure in aqueous solutions. The reaction is performed in a flow system and completed with 100% conversion under a variety of flow rates, 2 to 100 mLmin-1 (normal laboratory fast flow conditions). Sodium borohydride or dihydrogen perform well as reducing agents. Scale-up of the reaction to flows of 100 mLmin-1 also shows high conversions and robust catalytic performance. Catalyst deactivation can be readily corrected by flowing a NaBH4 solution. The catalytic system proves to be generally efficient, performing well with a range of nitroaromatic compounds. The shelf life of the catalyst is excellent and its reusability after 6-8 months of storage showed the same performance as for the fresh catalyst.

Solar Driven Photocatalytic Activity of Porphyrin Sensitized TiO2: Experimental and Computational Studies.

The absence of a secure long-term sustainable energy supply is recognized as a major worldwide technological challenge. The generation of H2 through photocatalysis is an environmentally friendly alternative that can help solve the energy problem. Thus, the development of semiconductor materials that can absorb solar light is an attractive approach. TiO2 has a wide bandgap that suffers from no activity in the visible spectrum, limiting its use of solar radiation. In this research, the semiconductor absorption profile was extended into the visible region of the solar spectrum by preparing porphyrin-TiO2 (P-TiO2) composites of meso-tetra(4-bromophenyl)porphyrin (PP1) and meso-tetra(5-bromo-2-thienyl)porphyrin (PP2) and their In(III), Zn(II) and Ga(III) metal complexes. Density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations were performed on the porphyrins to gain insight into their electron injection capability. The results demonstrate that P-TiO2 systems merit further in-depth study for applications that require efficient photocatalytic H2 generation.

Heterogeneous photocatalysis of azides: extending nitrene photochemistry to longer wavelengths.

The photodecomposition of azides to generate nitrenes usually requires wavelengths in the <300 nm region. In this study, we show that this reaction can be readily performed in the UVA region (368 nm) when catalyzed by Pd-decorated TiO2. In aqueous medium the reaction leads to amines, with water acting as the H source; however, in non-protic and non-nucleophilic media, such as acetonitrile, nitrenes recombine to yield azo compounds, while azirine-mediated trapping occurs in the presence of nucleophiles. The heterogeneous process facilitates catalyst separation while showing great chemoselectivity and high yields.

Photochemical benzylic radical arylation promoted by supported Pd nanostructures.

We report a novel way to promote photochemical benzylic radical arylations using Pd nanostructures. Traditional benzylic radical reaction pathways are challenged by the presence of metal centres that provoke unprecedented regioselectivity towards more synthetically relevant C(sp3)-C(sp2) couplings. This new C-H activation pathway is rationalised by means of a pseudo-persistent radical effect facilitated by metal centres. We show the mechanistic and computational aspects of the heterogeneous photocatalytic processes that are the root of this drastic change in reactivity.

Photochemical Dehalogenation of Aryl Halides: Importance of Halogen Bonding.

Upon UVA irradiation, aryl halides can undergo dehalogenation in the presence of bases and methanol as a hydrogen donor. This catalyst-free photochemical dehalogenation is furnished through a facile radical chain reaction under mild conditions. The chain reaction follows UVA irradiation of the reaction mixture in a transition-metal-free environment. Mechanistic studies support a chain mechanism in which initiation involves absorption by a methoxide-bromoarene complex facilitated by halogen-bonding interactions. The methoxide-bromine interaction leads to a weakened Br-C bond that is prone to facile cleavage during the initiation and propagation steps.

Perylene-Grafted Silicas: Mechanistic Study and Applications in Heterogeneous Photoredox Catalysis.

A mechanistic study is herein presented for the use of heterogeneous photocatalysts based on perylene moieties. First, the successful immobilization of perylene diimides (PDI) on silica matrices is demonstrated, including their full characterization by means of electronic microscopy, surface area measurements, powder XRD, thermogravimetric analysis, and FTIR, 29 Si and 13 C solid-state NMR, fluorescence, and diffuse reflectance spectroscopies. Then, the photoredox activity of the material was tested by using two model reactions, alkene oxidation and 4-nitrobenzylbromide reduction, and mechanistic studies were performed. The mechanistic insights into their photoredox activity show they have promising dual photocatalytic activity for both organic oxidations and reductions.

Spectroscopic and Time-Dependent DFT Study of the Photophysical Properties of Substituted 1,4-Distyrylbenzenes.

In this contribution, we examine the photophysical properties of 15 totally trans-trans 1,4-distyrylbenzene derivatives (DSBs) functionalized with different electron-donating (ED) and electron-withdrawing (EW) groups by experimental and computational methodologies. We use UV-vis and fluorescence spectroscopies to determine the experimental optical properties such as the maximum absorption (λabsexp) and emission (λemexp) wavelengths, the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gaps (ΔEabsexp), the molar extinction coefficients (ε), the fluorescence quantum yields (Φf), and the fluorescence lifetimes (τ). We also calculate the experimental spontaneous emission decay rate (krexp) and correlate all of these magnitudes to the corresponding calculated properties, maximum absorption (λabscal) and emission (λemcal) wavelengths, vertical transition energies (ΔEabscal), oscillator strength (Fosc), and spontaneous emission decay rate (krcal), obtained by the time-dependent density functional theory method. We analyze the effect of the electronic nature of the substituents on the properties of the DSBs, finding that the ED and EW groups lead to bathochromic shifts. This is consistent with the decrease of ΔE values as the strength of ED and EW substituents increases. We find excellent correlations between calculated and experimental values for λabs, λem, and ΔEabs (r ∼ 0.99-0.95). Additionally, the correlations between the relative ε with Fosc values and the kr values are in good agreement (r ∼ 0.88-0.72) with the experimental properties. Overall, we find that for substituted 1,4-DSBs, computational chemistry is an excellent tool to predict structure-property relationships, which can be useful to forecast the properties of their polymeric analogues, which are usually difficult to determine experimentally.

Highly Electrophilic Titania Hole as a Versatile and Efficient Photochemical Free Radical Source.

Photogenerated holes in nanometric semiconductors, such as TiO2, constitute remarkable powerful electrophilic centers, capable of capturing an electron from numerous donors such as ethers, or nonactivated substrates like toluene or acetonitrile, and constitute an exceptionally clean and efficient source of free radicals. In contrast with typical free radical precursors, semiconductors generate single radicals (rather than pairs), where the precursors can be readily removed by filtration or centrifugation after use, thus making it a convenient tool in organic chemistry. The process can be described as an example of dystonic proton coupled electron transfer.

Hydrophobic silver nanoparticles interacting with phospholipids and stratum corneum mimic membranes in Langmuir monolayers.

The interaction of hydrophobic silver nanoparticles with different phospholipids and stratum corneum mimic (SCM) membranes is studied in Langmuir monolayers. Thus, silver nanoparticles coated with oleic acid (AgNP-OA) were synthesized, characterized and incorporated in Langmuir monolayers of single phospholipids -having different chain length, saturation degree and phase state- or of a SCM mixture. The incorporation of AgNP-OA to the lipid monolayers generated an expansion of the monolayers and a decrease of the surface compressional modulus compared to the pure lipid. X-ray photoelectron spectroscopy (XPS) suggested that the zwitterionic choline-phospholipids can be adsorbed onto the nanoparticles' surface, which is relevant considering that phospholipids are the major constituents of the cell membrane. We also studied the changes in the topography at the mesoscale level using Brewster angle microscopy. We found the most prominent changes in the lipids with liquid-condensed phase, such as SCM, showing segregation of their components. This could have major implications in the barrier function of the membrane, affecting for example the skin permeability towards hydrophobic nanoparticles. Finally, the capability of hydrophobic AgNP-OA for delivering Ag+ ions was studied in aqueous media in the absence and presence of phospholipids. In both conditions, AgNP-OA released Ag+ at reported-bactericidal concentrations, being double in the presence of phospholipids.

Catalytic farming: reaction rotation extends catalyst performance.

The use of heterogeneous catalysis has key advantages compared to its homogeneous counterpart, such as easy catalyst separation and reusability. However, one of the main challenges is to ensure good performance after the first catalytic cycles. Active catalytic species can be inactivated during the catalytic process leading to reduced catalytic efficiency, and with that loss of the advantages of heterogeneous catalysis. Here we present an innovative approach in order to extend the catalyst lifetime based on the crop rotation system used in agriculture. The catalyst of choice to illustrate this strategy, Pd@TiO2, is used in alternating different catalytic reactions, which reactivate the catalyst surface, thus extending the reusability of the material, and preserving its selectivity and efficiency. As a proof of concept, different organic reactions were selected and catalyzed by the same catalytic material during target molecule rotation.

Glass wool: a novel support for heterogeneous catalysis.

Heterogeneous catalysis presents significant advantages over homogeneous catalysis such as ease of separation and reuse of the catalyst. Here we show that a very inexpensive, manageable and widely available material - glass wool - can act as a catalyst support for a number of different reactions. Different metal and metal oxide nanoparticles, based on Pd, Co, Cu, Au and Ru, were deposited on glass wool and used as heterogeneous catalysts for a variety of thermal and photochemical organic reactions including reductive de-halogenation of aryl halides, reduction of nitrobenzene, Csp3-Csp3 couplings, N-C heterocycloadditions (click chemistry) and Csp-Csp2 couplings (Sonogashira couplings). The use of glass wool as a catalyst support for important organic reactions, particularly C-C couplings, opens the opportunity to develop economical heterogeneous catalysts with excellent potential for flow photo-chemistry application.

How Fast Can Thiols Bind to the Gold Nanoparticle Surface?

Kinetics of gold nanoparticle surface modification with thiols can take more than one hour for completion. 7-mercapto-4-methylcoumarin can be used to follow the process by fluorescence spectroscopy and serves as a convenient molecular probe to determine relative kinetics. SERS studies with aromatic thiols further support the slow surface modification kinetics observed by fluorescence spectroscopy. The formation of thiolate bonds is a relatively slow process; we recommend one to two hour wait for thiol binding to be essentially complete, while for disulfides, overnight incubation is suggested.

Selective Photoinduced Antibacterial Activity of Amoxicillin-Coated Gold Nanoparticles: From One-Step Synthesis to in Vivo Cytocompatibility.

Photoinduced antibacterial gold nanoparticles were developed as an alternative for the treatment of antibiotic-resistant bacteria. Thanks to the amoxicillin coating, they possess high in vivo stability, selectivity for the bacteria wall, a good renal clearance, and are completely nontoxic for eukaryotic cells at the bactericidal concentrations. A simple one-step synthesis of amoxi@AuNP is described at mild temperatures using the antibiotic as both reducing and stabilizing agent. Time-resolved fluorescence microscopy proved these novel nano-photosensitizers, with improved selectivity, are bactericidal but showing excellent biocompatibility toward eukaryotic cells at the same dose (1.5 µg/mL) when co-cultures are analyzed. Their stability in biological media, hemocompatibility, and photo-antibacterial effect against sensitive and antibiotic-resistant Staphylococcus aureus were evaluated in vitro, whereas toxicity, renal clearance, and biodistribution were studied in vivo in male Wistar rats. The use of these nanoparticles to treat antibiotic-resistant infections is promising given their high stability and cytocompatibility.

Biocompatibility and photo-induced antibacterial activity of lignin-stabilized noble metal nanoparticles.

One-pot thermal and photochemical syntheses of lignin-doped silver and gold nanoparticles were developed and their antimicrobial properties were studied against Escherichia coli and Staphylococcus aureus. The nature of the lignin as well as the metal are directly involved in the antimicrobial activity observed in these nanocomposites. Whereas one of the nanocomposites is innocuous under dark conditions and shows photoinduced activity only against Staphylococcus aureus, the rest of the lignin-coated silver nanoparticles studied show antimicrobial activity under dark and light conditions for both bacteria strains. Additionally, only photoinduced activity is observed for lignin-coated gold nanoparticles. Importantly, the particles are non-cytotoxic towards human cells at the bactericidal concentrations. Preliminary assays show these silver nanoparticles as potential antimicrobial agents towards S. aureus biofilm eradication.

Thiol-Stabilized Gold Nanoparticles: New Ways To Displace Thiol Layers Using Yttrium or Lanthanide Chlorides.

We use the aurophilic interactions shown by lanthanides to overcome the sulfur-gold interaction. UV-vis and X-ray photoelectron spectroscopy confirm that yttrium or lanthanide chlorides easily displace sulfur ligands from the surface of thiol-stabilized gold nanoparticles.

Visible Light Production of Hydrogen by Ablated Graphene: Water Splitting or Carbon Gasification?

Reduced graphene oxide modified by pulsed laser ablation causes water splitting under visible light illumination (532 nm). When the light source is a pulsed laser, water splitting is accompanied by carbon gasification (CO formation); however, conventional (LED) light sources produce water splitting exclusively.

Photophysics of 7-mercapto-4-methylcoumarin and derivatives: complementary fluorescence behaviour to 7-hydroxycoumarins.

The photophysical behaviour of 7-mercapto-4-methylcoumarin (C-SH) and derivatives has been studied in different solvents. In contrast to 7-hydroxy-4-methylcoumarin, C-SH shows poor emission, but high fluorescence when the thiol is alkylated. The origin and character of the lowest singlet states are discussed, specifically proposing that the thione-like C[double bond, length as m-dash]S resonance form plays a key role in excited state deactivation in C-SH.