High pressure behaviour of the organic semiconductor salt (TTF-BTD)2I3.

This study focuses on the effect of structure compression and cooling on the stereoelectronic properties of the planar π-conjugated TTF-BTD (TTF = tetrathiafulvalene; BTD = 2,1,3-benzothiadiazole) molecule, a prototypical example in which an electron-donor moiety is compactly annulated to an electron-acceptor moiety. Its partially oxidised iodine salt (TTF-BTD)2I3 is a crystalline semiconductor featuring segregated columns of TTF+0.5 units stacked via alternating short and long π-π interactions. We studied TTF-BTD at temperatures ranging from 300 K to 90 K and at pressures up to 7.5 GPa, using both X-ray diffraction and Raman spectroscopy to determine the properties of the compressed samples. Periodic DFT calculations and several theoretical tools were employed to characterize the calculated structural modifications and to predict the structural changes up to 60 GPa. The existence of an unprecedented new phase is predicted above 20 GPa, following a covalent bond formation between two neighbouring TTF-BTD units.

Industrial Graphene Coating of Low-Voltage Copper Wires for Power Distribution.

Copper (Cu) is the electrical conductor of choice in many categories of electrical wiring, with household and building installation being the major market of this metal. This work demonstrates the coating of Cu wires-with diameters relevant for low-voltage (LV) applications-with graphene. The chemical vapor deposition (CVD) coating process is rapid, safe, scalable, and industrially compatible. Graphene-coated Cu wires display good oxidation resistance and increased electrical conductivity (up to 1% immediately after coating and up to 3% after 24 months), allowing for wire diameter reduction and thus significant savings in wire production costs. Combined spectroscopic and diffraction analysis indicates that the conductivity increase is due to a change in Cu crystallinity induced by the coating process conditions, while electrical testing of aged wires shows that graphene plays a major role in maintaining improved electrical performances over long periods of time. Finally, graphene coating of Cu wires using an ambient-pressure roll-to-roll (R2R) CVD reactor is demonstrated. This enables the in-line production of graphene-coated metallic wires as required for industrial scale-up.

Structure determination, thermal stability and dissolution rate of δ-indomethacin.

The structure solution of the δ-polymorph of indomethacin was obtained using three-dimensional electron diffraction. This form shows a significantly enhanced dissolution rate compared with the more common and better studied α- and γ-polymorphs, indicating better biopharmaceutical properties for medicinal applications. The structure was solved in non-centrosymmetric space group P21 and comprises two molecules in the asymmetric unit. Packing and molecule conformation closely resemble indomethacin methyl ester and indomethacin methanol solvate. Knowledge of the structure allowed the rational interpretation of spectroscopic IR and Raman data for δ-polymorph and a tentative interpretation for still unsolved indomethacin polymorphs. Finally, we observed a solid-solid transition from δ-polymorph to α-polymorph that can be driven by similarities in molecular conformation.

The structure of kaliophilite KAlSiO4, a long-lasting crystallographic problem.

Kaliophilite is a feldspathoid mineral found in two Italian magmatic provinces and represents one of the 12 known phases with composition close to KAlSiO4. Despite its apparently simple formula, the structure of this mineral revealed extremely complex and resisted structure solution for more than a century. Samples from the Vesuvius-Monte Somma and Alban Hills volcanic areas were analyzed through a multi-technique approach, and finally the crystal structure of kaliophilite was solved using 3D electron diffraction and refined against X-ray diffraction data of a twinned crystal. Results were also ascertained by the Rietveld method using synchrotron powder intensities. It was found that kaliophilite crystallizes in space group P3 with unit-cell parameters a = 27.0597 (16), c = 8.5587 (6) Å, V = 5427.3 (7) Å3 and Z = 54. The kaliophilite framework is a variant of the tridymite topology, with alternating SiO4 and AlO4 tetrahedra forming sheets of six-membered rings (63 nets), which are connected along [001] by sharing the apical oxygen atoms. Considering the up (U) and down (D) orientations of the linking vertex, kaliophilite is the first framework that contains three different ring topologies: nine (1-3-5) (UDUDUD) rings, six (1-2-3) (UUUDDD) rings and twelve (1-2-4) (UUDUDD) rings. This results in a relatively open (19.9 tetrahedra nm-3) channel system with multiple connections between the double six-ring cavities. Such a framework requires a surprisingly large unit cell, 27 times larger than the cell of kalsilite, the simplest phase with the same composition. The occurrence of some Na for K substitution (3-10%) may be related to the characteristic structural features of kaliophilite. Micro-twinning, pseudo-symmetries and anisotropic hkl-dependent peak broadening were also detected, and they may account for the elusive character of the kaliophilite crystal structure.

Electron Diffraction on Flash-Frozen Cowlesite Reveals the Structure of the First Two-Dimensional Natural Zeolite.

Cowlesite, ideally Ca6Al12Si18O60·36H2O, is to date the only natural zeolite whose structure could not be determined by X-ray methods. In this paper, we present the ab initio structure determination of this mineral obtained by three-dimensional (3D) electron diffraction data collected from single-crystal domains of a few hundreds of nanometers. The structure of cowlesite consists of an alternation of rigid zeolitic layers and low-density interlayers supported by water and cations. This makes cowlesite the only two-dimensional (2D) zeolite known in nature. When cowlesite gets in contact with a transmission electron microscope vacuum, a phase transition to a conventional 3D zeolite framework occurs in few seconds. The original cowlesite structure could be preserved only by adopting a cryo-plunging sample preparation protocol usually employed for macromolecular samples. Such a protocol allows the investigation by 3D electron diffraction of very hydrated and very beam-sensitive inorganic materials, which were previously considered intractable by transmission electron microscopy crystallographic methods.

Magnetic Network on Demand: Pressure Tunes Square Lattice Coordination Polymers Based on {[Cu(pyrazine)2]2+}n.

We report the pressure-induced structural and magnetic changes in [CuCl(pyz)2](BF4) (pyz = pyrazine) and [CuBr(pyz)2](BF4), two members of a family of three-dimensional coordination polymers based on square mesh {[Cu(pyz)2]2+}n layers. High-pressure X-ray diffraction and density functional theory calculations have been used to investigate the structure-magnetic property relationship. Although structurally robust and almost undeformed within a large pressure range, the {[Cu(pyz)2]2+}n network can be electronically modified by adjusting the interaction of the apical linkers interconnecting the layers, which has strong implications for the magnetic properties. It is then demonstrated that the degree of covalent character of the apical interaction explains the difference in magnetic exchange between the two species. We have also investigated the mechanical deformation of the network induced by nonhydrostatic compression that affects the structure depending on the crystal orientation. The obtained results suggest the existence of "Jahn-Teller frustration" triggered at the highest hydrostatic pressure limit.

The Crystal Structure of Orthocetamol Solved by 3D Electron Diffraction.

Orthocetamol is a regioisomer of the well-known pain medication paracetamol and a promising analgesic and an anti-arthritic medicament itself. However, orthocetamol cannot be grown as single crystals suitable for X-ray diffraction, so its crystal structure has remained a mystery for more than a century. Here, we report the ab-initio structure determination of orthocetamol obtained by 3D electron diffraction, combining a low-dose acquisition method and a dedicated single-electron detector for recording the diffracted intensities. The structure is monoclinic, with a pseudo-tetragonal cell that favors multiple twinning on a scale of a few tens of nanometers. The successful application of 3D electron diffraction to orthocetamol introduces a new gold standard of total structure solution in all cases where X-ray diffraction and electron-microscope imaging methods fail.

Nanobeam precession-assisted 3D electron diffraction reveals a new polymorph of hen egg-white lysozyme.

Recent advances in 3D electron diffraction have allowed the structure determination of several model proteins from submicrometric crystals, the unit-cell parameters and structures of which could be immediately validated by known models previously obtained by X-ray crystallography. Here, the first new protein structure determined by 3D electron diffraction data is presented: a previously unobserved polymorph of hen egg-white lysozyme. This form, with unit-cell parameters a = 31.9, b = 54.4, c = 71.8 Å, ß = 98.8°, grows as needle-shaped submicrometric crystals simply by vapor diffusion starting from previously reported crystallization conditions. Remarkably, the data were collected using a low-dose stepwise experimental setup consisting of a precession-assisted nanobeam of ∼150 nm, which has never previously been applied for solving protein structures. The crystal structure was additionally validated using X-ray synchrotron-radiation sources by both powder diffraction and single-crystal micro-diffraction. 3D electron diffraction can be used for the structural characterization of submicrometric macromolecular crystals and is able to identify novel protein polymorphs that are hardly visible in conventional X-ray diffraction experiments. Additionally, the analysis, which was performed on both nanocrystals and microcrystals from the same crystallization drop, suggests that an integrated view from 3D electron diffraction and X-ray microfocus diffraction can be applied to obtain insights into the molecular dynamics during protein crystal growth.

3D electron diffraction techniques.

3D electron diffraction is an emerging technique for the structural analysis of nanocrystals. The challenges that 3D electron diffraction has to face for providing reliable data for structure solution and the different ways of overcoming these challenges are described. The route from zone axis patterns towards 3D electron diffraction techniques such as precession-assisted electron diffraction tomography, rotation electron diffraction and continuous rotation is also discussed. Finally, the advantages of the new hybrid detectors with high sensitivity and fast readout are demonstrated with a proof of concept experiment of continuous rotation electron diffraction on a natrolite nanocrystal.

Daliranite, PbHgAs2S5: determination of the incommensurately modulated structure and revision of the chemical formula.

The incommensurately modulated crystal structure of the mineral daliranite has been determined using 3D electron diffraction data obtained on nanocrystalline domains. Daliranite is orthorhombic with a = 21, b = 4.3, c = 9.5 Šand shows modulation satellites along c. The solution of the average structure in the Pnma space group together with energy-dispersive X-ray spectroscopy data obtained on the same domains indicate a chemical formula of PbHgAs2S5, which has one S fewer than previously reported. The crystal structure of daliranite is built from columns of face-sharing PbS8 bicapped trigonal prisms laterally connected by [2+4]Hg polyhedra and (As3+2S5)4- groups. The excellent quality of the electron diffraction data allows a structural model to be built for the modulated structure in superspace, which shows that the modulation is due to an alternated occupancy of a split As site.

Quasi-2D Heisenberg Antiferromagnets [CuX(pyz)2](BF4) with X = Cl and Br.

Two Cu2+ coordination polymers [CuCl(pyz)2](BF4) 1 and [CuBr(pyz)2](BF4) 2 (pyz = pyrazine) were synthesized in the family of quasi two-dimensional (2D) [Cu(pyz)2]2+ magnetic networks. The layer connectivity by monatomic halide ligands results in significantly shorter interlayer distances. Structures were determined by single-crystal X-ray diffraction. Temperature-dependent X-ray diffraction of 1 revealed rigid [Cu(pyz)2]2+ layers that do not expand between 5 K and room temperature, whereas the expansion along the c-axis amounts to 2%. The magnetic susceptibility of 1 and 2 shows a broad maximum at ∼8 K, indicating antiferromagnetic interactions within the [Cu(pyz)2]2+ layers. 2D Heisenberg model fits result in J∥ = 9.4(1) K for 1 and 8.9(1) K for 2. The interlayer coupling is much weaker with | J⊥| = 0.31(6) K for 1 and 0.52(9) K for 2. The electron density, experimentally determined and calculated by density functional theory, confirms the location of the singly occupied orbital (the magnetic orbital) in the tetragonal plane. The analysis of the spin density reveals a mainly σ-type exchange through pyrazine. Kinks in the magnetic susceptibility indicate the onset of long-range three-dimensional magnetic order below 4 K. The magnetic structures were determined by neutron diffraction. Magnetic Bragg peaks occur below TN = 3.9(1) K for 1 and 3.8(1) K for 2. The magnetic unit cell is doubled along the c-axis ( k = 0, 0, 0.5). The ordered magnetic moments are located in the tetragonal plane and amount to 0.76(8) µB/Cu2+ for 1 and 0.6(1) µB/Cu2+ for 2 at 1.5 K. The moments are coupled antiferromagnetically both in the ab plane and along the c-axis. The Cu2+ g-tensor was determined from electron spin resonance spectra as g x = 2.060(1), g z = 2.275(1) for 1 and g x = 2.057(1), g z = 2.272(1) for 2 at room temperature.

Experimental and Theoretical Electron Density Analysis of Copper Pyrazine Nitrate Quasi-Low-Dimensional Quantum Magnets.

The accurate electron density distribution and magnetic properties of two metal-organic polymeric magnets, the quasi-one-dimensional (1D) Cu(pyz)(NO3)2 and the quasi-two-dimensional (2D) [Cu(pyz)2(NO3)]NO3·H2O, have been investigated by high-resolution single-crystal X-ray diffraction and density functional theory calculations on the whole periodic systems and on selected fragments. Topological analyses, based on quantum theory of atoms in molecules, enabled the characterization of possible magnetic exchange pathways and the establishment of relationships between the electron (charge and spin) densities and the exchange-coupling constants. In both compounds, the experimentally observed antiferromagnetic coupling can be quantitatively explained by the Cu-Cu superexchange pathway mediated by the pyrazine bridging ligands, via a σ-type interaction. From topological analyses of experimental charge-density data, we show for the first time that the pyrazine tilt angle does not play a role in determining the strength of the magnetic interaction. Taken in combination with molecular orbital analysis and spin density calculations, we find a synergistic relationship between spin delocalization and spin polarization mechanisms and that both determine the bulk magnetic behavior of these Cu(II)-pyz coordination polymers.

Solid-State Reversible Nucleophilic Addition in a Highly Flexible MOF.

A flexible and porous metal-organic framework, based on Co(II) connectors and benzotriazolide-5-carboxylato linkers, is shown to selectively react with guest molecules trapped in the channels during the sample preparation or after an exchange process. Stimulated by a small crystal shrinking, upon compression or cooling, the system undergoes a reversible, nonoxidative nucleophilic addition of the guest molecules to the metal ion. With dimethylformamide, only part of the penta-coordinated Co atoms transform into hexa-coordinated, whereas with the smaller methanol all of them stepwise increase their coordination, preserving the crystallinity of the solid at all stages. This extraordinary example of chemisorption has enormous implications for catalysis, storage, or selective sieving.

Anagostic interactions under pressure: attractive or repulsive?

Square-planar d(8)-ML4 complexes might display subtle but noticeable local Lewis acidic sites in axial direction in the valence shell of the metal atom. These sites of local charge depletion provide the electronic prerequisites to establish weakly attractive 3c-2e M⋅⋅⋅H-C agostic interactions, in contrast to earlier assumptions. Furthermore, we show that the use of the sign of the (1)H NMR shifts as major criterion to classify M⋅⋅⋅H-C interactions as attractive (agostic) or repulsive (anagostic) can be dubious. We therefore suggest a new characterization method to probe the response of these M⋅⋅⋅H-C interactions under pressure by combined high pressure IR and diffraction studies.

Re-investigation of lead(II) formate.

The crystal structure of the title compound, poly[di-µ(4)-formato-lead(II)], [Pb(HCOO)(2)](n), has been re-investigated. It consists of a three-dimensional polymeric network of Pb(2+) nodes connected by bridging formate anions. Despite having been described previously, the structural information available so far [Harrison & Steel (1982). J. Organomet. Chem. 239, 105-113] is incomplete and the reported Pnma space group is incorrect. In this work, the space-group assignment to P2(1)2(1)2(1) is discussed and a complete description of the structural features of lead(II) formate is provided.