Classes of Stem Cells: From Biology to Engineering.

Purpose: The majority of adult tissues are limited in self-repair and regeneration due to their poor intrinsic regenerative capacity. It is widely recognized that stem cells are present in almost all adult tissues, but the natural regeneration in adult mammals is not sufficient to recover function after injury or disease. Historically, 3 classes of stem cells have been defined: embryonic stem cells (ESCs), adult mesenchymal stem cells (MSCs), and induced pluripotent stem cells (iPSCs). Here, we have defined a fourth fully engineered class: the synthetic artificial stem cell (SASC). This review aims to discuss the applications of these stem cell classes in musculoskeletal regenerative engineering. Method: We screened articles in PubMed and bibliographic search using a combination of keywords. Relevant and high-cited articles were chosen for inclusion in this narrative review. Results: In this review, we discuss the different classes of stem cells that are biologically derived (ESCs and MSCs) or semi-engineered/engineered (iPSCs, SASC). We also discuss the applications of these stem cell classes in musculoskeletal regenerative engineering. We further summarize the advantages and disadvantages of using each of the classes and how they impact the clinical translation of these therapies. Conclusion: Each class of stem cells has advantages and disadvantages in preclinical and clinical settings. We also propose the engineered SASC class as a potentially disease-modifying therapy that harnesses the paracrine action of biologically derived stem cells to mimic regenerative potential. Lay Summary: The majority of adult tissues are limited in self-repair and regeneration, even though stem cells are present in almost all adult tissues. Historically, 3 classes of stem cells have been defined: embryonic stem cells (ESCs), adult mesenchymal stem cells (MSCs), and induced pluripotent stem cells (iPSCs). Here, we have defined a fourth, fully engineered class: the synthetic artificial stem cell (SASC). In this review, we discuss the applications of each of these stem cell classes in musculoskeletal regenerative engineering. We further summarize the advantages and disadvantages of using each of these classes and how they impact the clinical translation of these therapies.

A Scientific Program in Regenerative Engineering (ASPIRE): A Prospective Program Aimed at Tackling Health Disparities in the USA.

The continued low numbers of Blacks in STEMM (Science, Technology, Engineering, Mathematics, and Medicine) represent an American crisis that threatens growing awareness and efforts to effectively address health disparities that affect the Black population. Regenerative engineering is an emerging STEMM field that seeks to combine principles from engineering, life sciences, physics, and medicine to develop new technologies for repairing and regenerating damaged tissues and organs. We believe that regenerative engineering has the potential to address some of the root causes of health disparities by developing new approaches that are more accessible and affordable, particularly for low-income communities and people living in rural areas. We have developed a new education program targeting to K-12 groups "A Scientific Program in Regenerative Engineering (ASPIRE)" that supports the mentoring and education of Black K-12 students to enter successfully and thrive as professionals in STEMM particularly in the area of regenerative engineering. We have been collaborating with several public-school systems in Connecticut, especially among the regions with health disparities to implement the program. We believe our new educational K-12 program would serve as a vehicle to reduce health disparities in the region.

Animal Models of Osteoarthritis: Updated Models and Outcome Measures 2016-2023.

Purpose: Osteoarthritis (OA) is a global musculoskeletal disorder that affects primarily the knee and hip joints without any FDA-approved disease-modifying therapies. Animal models are essential research tools in developing therapies for OA; many animal studies have provided data for the initiation of human clinical trials. Despite this, there is still a need for strategies to recapitulate the human experience using animal models to better develop treatments and understand pathogenesis. Since our last review on animal models of osteoarthritis in 2016, there have been exciting updates in OA research and models. The main purpose of this review is to update the latest animal models and key features of studies in OA research. Method: We used our existing classification method and screened articles in PubMed and bibliographic search for animal OA models between 2016 and 2023. Relevant and high-cited articles were chosen for inclusion in this narrative review. Results: Recent studies were analyzed and classified. We also identified ex vivo models as an area of ongoing research. Each animal model offers its own benefit in the study of OA and there are a full range of outcome measures that can be assessed. Despite the vast number of models, each has its drawbacks that have limited translating approved therapies for human use. Conclusion: Depending on the outcome measures and objective of the study, researchers should pick the best model for their work. There have been several exciting studies since 2016 that have taken advantage of regenerative engineering techniques to develop therapies and better understand OA. Lay Summary: Osteoarthritis (OA) is a chronic debilitating disease without any cure that affects mostly the knee and hip joints and often results in surgical joint replacement. Cartilage protects the joint from mechanical forces and degrades with age or in response to injury. The many contributing causes of OA are still being investigated, and animals are used for preclinical research and to test potential new treatments. A single consensus OA animal model for preclinical studies is non-existent. In this article, we review the many animal models for OA and provide a much-needed update on studies and model development since 2016.

Functions and Effectiveness of Unloader, Patellofemoral, and Knee Sleeve Orthoses: A Review.

Background: Knee orthoses have been extensively used as a nonsurgical approach to improving knee deficiencies. Currently, arthritic knee conditions remain the leading cause of disability, and this number is expected to increase. As the use of knee orthoses varies widely, so has their effectiveness which is still largely debatable. Here, we present the functions and effectiveness of the three most prominent knee orthotic models dedicated to supporting knee osteoarthritis-unloader, patellofemoral, and knee sleeves. Purpose/Research Question: Considering the depth and diversity of the many clinical studies and documented laboratory reports published to date, this literature review was created to educate the clinician, patient, and researcher on common knee orthoses used for the management of arthritic knee conditions. In doing so, we discuss their design, biomechanical effects, and clinical efficacy, as well as broader outcomes, limitations, and recommendations for use. Results/Synthesis: The knee orthoses discussed within the scope of this paper are dedicated to protecting the knee against strenuous compressive loads that may affect the patellofemoral and tibiofemoral joints of the knee. Since the knee has multiple axes of motion and articulating surfaces that experience different loads during functional activities, it can be implied that, to a large extent, knee brace designs can differ drastically. Unloader knee orthoses are designed to decrease tibiofemoral and patellofemoral joint pressures. Patellofemoral knee orthoses are designed to decrease strain on the patellofemoral and quadriceps tendons while stabilizing the patella. Knee sleeves are designed to stabilize movements, reduce pain in joints, and improve proprioception across the knee joint. Conclusion: Although patients often report benefits from wearing braces, these benefits have not been confirmed by clinicians and scientific investigators. Results from these three orthosis types show that clinical efficacy is still elusive due to the different methodologies used by researchers. Layman Summary: Knee orthoses also referred to as knee brace are commonly used for support and stability of the knee. Unloader knee braces are designed to relieve and support those suffering from knee osteoarthritis by improving physical impairment and reducing pain. Patellofemoral knee braces aim to help patients manage patellofemoral pain syndrome. Rehabilitative compression sleeves, also known as knee sleeves, are often used to assist patients suffering from knee pain and laxity. Important findings on the three knee braces discussed show discrepancies in results. Their effectiveness and validity are yet to be understood.

Adopt-A-Classroom Program: A Potential Platform to Address the Root of Health Disparities in the US.

The underrepresentation of Black doctors is a significant issue in the US that led to the perpetuation of health disparities in the African American community. Racial and ethnic minorities in the US have been shown to have higher rates of chronic diseases, such as hypertension, diabetes, and cardiovascular disease, as well as higher rates of obesity and premature death compared to White people. While Blacks make up more than 13% of the US population, they comprise only 4% of US doctors and less than 7% of medical students. It is believed that this problem requires more deliberate efforts by policymakers and the educational establishment, not only at the undergraduate and medical school level, but earlier in the educational "pipeline"-the K-12 school system. While the medical field is rooted in Science, Technology, Engineering, and Mathematics (STEM), we have launched a new initiative that will provide year-round STEM development activities for K-12 education in Connecticut in Hartford and Waterbury districts, especially among populations with health disparities.

Development of porcine skeletal muscle extracellular matrix-derived hydrogels with improved properties and low immunogenicity.

Hydrogels derived from decellularized extracellular matrices (ECM) of animal origin show immense potential for regenerative applications due to their excellent cytocompatibility and biomimetic properties. Despite these benefits, the impact of decellularization protocols on the properties and immunogenicity of these hydrogels remains relatively unexplored. In this study, porcine skeletal muscle ECM (smECM) underwent decellularization using mechanical disruption (MD) and two commonly employed decellularization detergents, sodium deoxycholate (SDC) or Triton X-100. To mitigate immunogenicity associated with animal-derived ECM, all decellularized tissues were enzymatically treated with α-galactosidase to cleave the primary xenoantigen-the α-Gal antigen. Subsequently, the impact of the different decellularization protocols on the resultant hydrogels was thoroughly investigated. All methods significantly reduced total DNA content in hydrogels. Moreover, α-galactosidase treatment was crucial for cleaving α-Gal antigens, suggesting that conventional decellularization methods alone are insufficient. MD preserved total protein, collagen, sulfated glycosaminoglycan, laminin, fibronectin, and growth factors more efficiently than other protocols. The decellularization method impacted hydrogel gelation kinetics and ultrastructure, as confirmed by turbidimetric and scanning electron microscopy analyses. MD hydrogels demonstrated high cytocompatibility, supporting satellite stem cell recruitment, growth, and differentiation into multinucleated myofibers. In contrast, the SDC and Triton X-100 protocols exhibited cytotoxicity. Comprehensive in vivo immunogenicity assessments in a subcutaneous xenotransplantation model revealed MD hydrogels' biocompatibility and low immunogenicity. These findings highlight the significant influence of the decellularization protocol on hydrogel properties. Our results suggest that combining MD with α-galactosidase treatment is an efficient method for preparing low-immunogenic smECM-derived hydrogels with enhanced properties for skeletal muscle regenerative engineering and clinical applications.

Grand Challenges at the Interface of Engineering and Medicine.

Over the past two decades Biomedical Engineering has emerged as a major discipline that bridges societal needs of human health care with the development of novel technologies. Every medical institution is now equipped at varying degrees of sophistication with the ability to monitor human health in both non-invasive and invasive modes. The multiple scales at which human physiology can be interrogated provide a profound perspective on health and disease. We are at the nexus of creating "avatars" (herein defined as an extension of "digital twins") of human patho/physiology to serve as paradigms for interrogation and potential intervention. Motivated by the emergence of these new capabilities, the IEEE Engineering in Medicine and Biology Society, the Departments of Biomedical Engineering at Johns Hopkins University and Bioengineering at University of California at San Diego sponsored an interdisciplinary workshop to define the grand challenges that face biomedical engineering and the mechanisms to address these challenges. The Workshop identified five grand challenges with cross-cutting themes and provided a roadmap for new technologies, identified new training needs, and defined the types of interdisciplinary teams needed for addressing these challenges. The themes presented in this paper include: 1) accumedicine through creation of avatars of cells, tissues, organs and whole human; 2) development of smart and responsive devices for human function augmentation; 3) exocortical technologies to understand brain function and treat neuropathologies; 4) the development of approaches to harness the human immune system for health and wellness; and 5) new strategies to engineer genomes and cells.

Fibroblast growth factor 8b (FGF-8b) enhances myogenesis and inhibits adipogenesis in rotator cuff muscle cell populations in vitro.

Fatty expansion is one of the features of muscle degeneration due to muscle injuries, and its presence interferes with muscle regeneration. Specifically, poor clinical outcomes have been linked to fatty expansion in rotator cuff tears and repairs. Our group recently found that fibroblast growth factor 8b (FGF-8b) inhibits adipogenic differentiation and promotes myofiber formation of mesenchymal stem cells in vitro. This led us to hypothesize that FGF-8b could similarly control the fate of muscle-specific cell populations derived from rotator cuff muscle involved in muscle repair following rotator cuff injury. In this study, we isolate fibro-adipogenic progenitor cells (FAPs) and satellite stem cells (SCs) from rat rotator cuff muscle tissue and analyzed the effects of FGF-8b supplementation. Utilizing a cell plating protocol, we successfully isolate FAPs-rich fibroblasts (FIBs) and SCs-rich muscle progenitor cells (MPCs). Subsequently, we demonstrate that FIB adipogenic differentiation can be inhibited by FGF-8b, while MPC myogenic differentiation can be enhanced by FGF-8b. We further demonstrate that phosphorylated ERK due to FGF-8b leads to the inhibition of adipogenesis in FIBs and SCs maintenance and myofiber formation in MPCs. Together, these findings demonstrate the powerful potential of FGF-8b for rotator cuff repair by altering the fate of muscle undergoing degeneration.

Electroconductivity, a regenerative engineering approach to reverse rotator cuff muscle degeneration.

Muscle degeneration is one the main factors that lead to the high rate of retear after a successful repair of rotator cuff (RC) tears. The current surgical practices have failed to treat patients with chronic massive rotator cuff tears (RCTs). Therefore, regenerative engineering approaches are being studied to address the challenges. Recent studies showed the promising outcomes of electroactive materials (EAMs) on the regeneration of electrically excitable tissues such as skeletal muscle. Here, we review the most important biological mechanism of RC muscle degeneration. Further, the review covers the recent studies on EAMs for muscle regeneration including RC muscle. Finally, we will discuss the future direction toward the application of EAMs for the augmentation of RCTs.

BME 2.0: Engineering the Future of Medicine.

If the 20th century was the age of mapping and controlling the external world, the 21st century is the biomedical age of mapping and controlling the biological internal world. The biomedical age is bringing new technological breakthroughs for sensing and controlling human biomolecules, cells, tissues, and organs, which underpin new frontiers in the biomedical discovery, data, biomanufacturing, and translational sciences. This article reviews what we believe will be the next wave of biomedical engineering (BME) education in support of the biomedical age, what we have termed BME 2.0. BME 2.0 was announced on October 12 2017 at BMES 49 (https://www.bme.jhu.edu/news-events/news/miller-opens-2017-bmes-annual-meeting-with-vision-for-new-bme-era/). We present several principles upon which we believe the BME 2.0 curriculum should be constructed, and from these principles, we describe what view as the foundations that form the next generations of curricula in support of the BME enterprise. The core principles of BME 2.0 education are (a) educate students bilingually, from day 1, in the languages of modern molecular biology and the analytical modeling of complex biological systems; (b) prepare every student to be a biomedical data scientist; (c) build a unique BME community for discovery and innovation via a vertically integrated and convergent learning environment spanning the university and hospital systems; (d) champion an educational culture of inclusive excellence; and (e) codify in the curriculum ongoing discoveries at the frontiers of the discipline, thus ensuring BME 2.0 as a launchpad for training the future leaders of the biotechnology marketplaces. We envision that the BME 2.0 education is the path for providing every student with the training to lead in this new era of engineering the future of medicine in the 21st century.

Erratum to "BME 2.0: Engineering the Future of Medicine".

[This corrects the article DOI: 10.34133/bmef.0001.].

The Shift: COVID-19-Associated Deaths are Now Trending Lower Among Blacks and Hispanics Compared to Whites.

BACKGROUND: Throughout the coronavirus (COVID-19) pandemic, research revealed people of color were more likely to be infected, have severe illness, and die due to the virus. However, some areas in the USA are now reporting a new shift; lower Black and Hispanic COVID-19 mortality rates compared to their White counterparts. Research indicates that this shift is the result of COVID-19's impact on disparities by race. In this paper, we analyze death data to determine if the new shift has occurred locally. Specifically, we examined COVID-19 prevalence and related death data in Connecticut by comparing race/ethnicity through two periods of time: one before and one after the first case of the Omicron variant of COVID-19. METHODS: This cross-sectional epidemiological analysis to examine cases and deaths by racial/ethnic status utilizes Connecticut data from March 2020 to February 2022. The following assumption is applied: expected pre-Omicron cases and deaths from March 5, 2020 to November 27, 2021 are equal to the number of cases and deaths during Omicron cases and deaths from November 28, 2021 to February 17, 2022. Race/ethnicity are operationalized as non-Hispanic White, non-Hispanic Black, and Hispanic. RESULTS: Pre-Omicron (March 5, 2020 to November 27, 2021) compared to the monthly aged adjusted COVID-19 case rate for Whites (394/10,000 populations), Blacks had a higher rate (501/10,000 populations), and Hispanics had the highest (585/10,000 populations). During the Omicron period (November 28 to February 17, 2022), significant changes in COVID-19 case rates were observed in all three ethnic groups, but the biggest changes were observed in Hispanics, followed by Blacks, and then Whites. The rate ratios further showed a remarkable reduction of 47% in case rates (from 1.0 pre-Omicron and from 1.47 during Omicron, p < 0.0001) for Hispanics, when compared to that of Whites. While Blacks showed a significant, smaller reduction of 5% in case rates (from 1.27 pre-Omicron and from 1.22 during the Omicron, p < 0.001) when compared to Whites. Regarding COVID-19-related mortality, the racial differences were similar. CONCLUSIONS AND RELEVANCE: By examining Connecticut's COVID-19 death and case data, this study identified the new shift that occurred locally. The current shift may be anchored in the evolution of the COVID-19 virus, public health guidelines/policies, and the degree to which populations have complied with public health recommendations.

Injectable and biodegradable piezoelectric hydrogel for osteoarthritis treatment.

Osteoarthritis affects millions of people worldwide but current treatments using analgesics or anti-inflammatory drugs only alleviate symptoms of this disease. Here, we present an injectable, biodegradable piezoelectric hydrogel, made of short electrospun poly-L-lactic acid nanofibers embedded inside a collagen matrix, which can be injected into the joints and self-produce localized electrical cues under ultrasound activation to drive cartilage healing. In vitro, data shows that the piezoelectric hydrogel with ultrasound can enhance cell migration and induce stem cells to secrete TGF-ß1, which promotes chondrogenesis. In vivo, the rabbits with osteochondral critical-size defects receiving the ultrasound-activated piezoelectric hydrogel show increased subchondral bone formation, improved hyaline-cartilage structure, and good mechanical properties, close to healthy native cartilage. This piezoelectric hydrogel is not only useful for cartilage healing but also potentially applicable to other tissue regeneration, offering a significant impact on the field of regenerative tissue engineering.

Hyaluronic acid-British anti-Lewisite as a safer chelation therapy for the treatment of arthroplasty-related metallosis.

Cobalt-containing alloys are useful for orthopedic applications due to their low volumetric wear rates, corrosion resistance, high mechanical strength, hardness, and fatigue resistance. Unfortunately, these prosthetics release significant levels of cobalt ions, which was only discovered after their widespread implantation into patients requiring hip replacements. These cobalt ions can result in local toxic effects-including peri-implant toxicity, aseptic loosening, and pseudotumor-as well as systemic toxic effects-including neurological, cardiovascular, and endocrine disorders. Failing metal-on-metal (MoM) implants usually necessitate painful, risky, and costly revision surgeries. To treat metallosis arising from failing MoM implants, a synovial fluid-mimicking chelator was designed to remove these metal ions. Hyaluronic acid (HA), the major chemical component of synovial fluid, was functionalized with British anti-Lewisite (BAL) to create a chelator (BAL-HA). BAL-HA effectively binds cobalt and rescues in vitro cell vitality (up to 370% of cells exposed to IC50 levels of cobalt) and enhances the rate of clearance of cobalt in vivo (t1/2 from 48 h to 6 h). A metallosis model was also created to investigate our therapy. Results demonstrate that BAL-HA chelator system is biocompatible and capable of capturing significant amounts of cobalt ions from the hip joint within 30 min, with no risk of kidney failure. This chelation therapy has the potential to mitigate cobalt toxicity from failing MoM implants through noninvasive injections into the joint.

Efficacy of a Novel Electroconductive Matrix To Treat Muscle Atrophy and Fat Accumulation in Chronic Massive Rotator Cuff Tears of the Shoulder.

The high retear rate after a successful repair of the rotator cuff (RC) is a major clinical challenge. Muscle atrophy and fat accumulation of RC muscles over time adversely affect the rate of retear. Since current surgical techniques do not improve muscle degenerative conditions, new treatments are being developed to reduce muscle atrophy and fat accumulation. In the previous study, we have shown the efficacy of aligned electroconductive nanofibrous fabricated by coating poly(3,4-ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) nanoparticles onto aligned poly(ε-caprolactone) (PCL) electrospun nanofibers (PEDOT:PSS matrix) to reduce muscle atrophy in acute and subacute models of RC tears (RCTs). In this study, we further evaluated the efficacy of the PEDOT:PSS matrix to reduce muscle atrophy and fat accumulation in a rat model of chronic massive full-thickness RCTs (MRCTs). The matrices were transplanted on the myotendinous junction to the belly of the supraspinatus and infraspinatus muscles at 16 weeks after MRCTs. The biomechanics and histological assessments showed the potential of the PEDOT:PSS matrix to suppress the progression of muscle atrophy, fat accumulation, and fibrosis in both supraspinatus and infraspinatus muscles at 24 and 32 weeks after MRCTs. We also demonstrated that the PEDOT:PSS matrix implantation significantly improved the tendon morphology and tensile properties compared with current surgical techniques.

Corrosion of Metals During Use in Arthroplasty.

Arthroplasty implants can undergo corrosion at the modular components, trunnion, and hinges, owing to implant material makeup, micromotion, and interaction with body fluid. In this review, various mechanisms of corrosion in arthroplasty were explored with suggestions on means of improvement. We identified 10 methods including pitting, crevice, mechanically assisted crevice corrosion, fretting, fretting initiated crevice corrosion, mechanically assisted taper corrosion, galvanic corrosion, stress/tension, fatigue corrosion, and inflammatory cell induced corrosion. The position of implants on the galvanic series, and their ability to maintain passivation contribute to their longevity in service. Due to the relative motion of arthroplastic components, bio-tribocorrosion may disrupt passive oxide films, and pitting is initiated at interfaces. Thus, corrosion in arthroplasty as an electrochemical phenomenon mainly starts on one spot and progresses in 3 steps: (1) the oxidative dissolution of metal from implant surfaces into the aqueous active environment, releasing cations, (2) the attraction of electrons to the opposite charge created at another point of the implant surface, producing current flow, and (3) the formation of oxides of metal and metal hydroxides deposited as rust at the surface of the implant. Recent innovations in material manufacturing continue to improve the efficiency of arthroplasty; however, the component parts remain susceptible to bio-tribocorrosion. Thus, a complete eradication of corrosion in arthroplasty would require futuristic materials with improvement in recent materials and designs, derived from knowledge of existing retrieved implants, and strategies to provide overall surface finishes that protect against bio-tribocorrosion.

Regenerative engineering of long bones using the small molecule forskolin.

Bone grafting procedures have become increasingly common in the United States, with approximately 500,000 cases occurring each year at a societal cost exceeding $2.4 billion. Recombinant human bone morphogenetic proteins (rhBMPs) are therapeutic agents that have been widely used by orthopedic surgeons to stimulate bone tissue formation alone and when paired with biomaterials. However, significant limitations such as immunogenicity, high production cost, and ectopic bone growth from these therapies remain. Therefore, efforts have been made to discover and repurpose osteoinductive small-molecule therapeutics to promote bone regeneration. Previously, we have demonstrated that a single-dose treatment with the small-molecule forskolin for just 24 h induces osteogenic differentiation of rabbit bone marrow-derived stem cells in vitro, while mitigating adverse side effects attributed with prolonged small-molecule treatment schemes. In this study, we engineered a composite fibrin-PLGA [poly(lactide-co-glycolide)]-sintered microsphere scaffold for the localized, short-term delivery of the osteoinductive small molecule, forskolin. In vitro characterization studies showed that forskolin released out of the fibrin gel within the first 24 h and retained its bioactivity toward osteogenic differentiation of bone marrow-derived stem cells. The forskolin-loaded fibrin-PLGA scaffold was also able to guide bone formation in a 3-mo rabbit radial critical-sized defect model comparable to recombinant human bone morphogenetic protein-2 (rhBMP-2) treatment, as demonstrated through histological and mechanical evaluation, with minimal systemic off-target side effects. Together, these results demonstrate the successful application of an innovative small-molecule treatment approach within long bone critical-sized defects.