Elevated fish densities extend kilometres from oil and gas platforms.

Thousands of offshore oil and gas platforms have been installed throughout the world's oceans and more structures are being installed as part of the transition to renewable energy. These structures increase the availability of ecological niches by providing hard substrate in midwater and complex 3D habitat on the seafloor. This can lead to 'hotspots' of biodiversity, or increased densities of flora and fauna, which potentially spill over into the local area. However, the distances over which these higher densities extend (the 'range of influence') can be highly variable. Fish aggregate at such structures, but the range of influence and any implications for wider fish populations, are unclear. We investigated the relationship between fish and platform areal densities using high resolution fisheries acoustic data. Data were collected in the waters surrounding the vessel exclusions zones around 16 oil and gas platforms in the North Sea, and throughout the wider area. We estimated densities of schooling fish using echo-integration, and densities of non-schooling fish using echo-counting. At 10 platforms, non-schooling fish densities were elevated near the platform relative to background levels in the equivalent wider area. The range of influence, defined here as the range to which fish densities were elevated above background, varied from 0.8 to 23 km. In areas of high platform density, fish schools were encountered more often, and non-schooling fish densities were higher, when controlling for other sources of environmental variation. This is the first time such long-range effects have been identified; previously, ranges of influence have been reported in the order of just 10s-100s of metres. These findings suggest that the environmental impact of these structures may extend further than previously thought, which may be relevant in the context of upcoming management decisions around the decommissioning of these structures.

Photosynthesis re-wired on the pico-second timescale.

Photosystems II and I (PSII, PSI) are the reaction centre-containing complexes driving the light reactions of photosynthesis; PSII performs light-driven water oxidation and PSI further photo-energizes harvested electrons. The impressive efficiencies of the photosystems have motivated extensive biological, artificial and biohybrid approaches to 're-wire' photosynthesis for higher biomass-conversion efficiencies and new reaction pathways, such as H2 evolution or CO2 fixation1,2. Previous approaches focused on charge extraction at terminal electron acceptors of the photosystems3. Electron extraction at earlier steps, perhaps immediately from photoexcited reaction centres, would enable greater thermodynamic gains; however, this was believed impossible with reaction centres buried at least 4 nm within the photosystems4,5. Here, we demonstrate, using in vivo ultrafast transient absorption (TA) spectroscopy, extraction of electrons directly from photoexcited PSI and PSII at early points (several picoseconds post-photo-excitation) with live cyanobacterial cells or isolated photosystems, and exogenous electron mediators such as 2,6-dichloro-1,4-benzoquinone (DCBQ) and methyl viologen. We postulate that these mediators oxidize peripheral chlorophyll pigments participating in highly delocalized charge-transfer states after initial photo-excitation. Our results challenge previous models that the photoexcited reaction centres are insulated within the photosystem protein scaffold, opening new avenues to study and re-wire photosynthesis for biotechnologies and semi-artificial photosynthesis.

Synthetic biology and bioelectrochemical tools for electrogenetic system engineering.

Synthetic biology research and its industrial applications rely on deterministic spatiotemporal control of gene expression. Recently, electrochemical control of gene expression has been demonstrated in electrogenetic systems (redox-responsive promoters used alongside redox inducers and electrodes), allowing for the direct integration of electronics with biological processes. However, the use of electrogenetic systems is limited by poor activity, tunability, and standardization. In this work, we developed a strong, unidirectional, redox-responsive promoter before deriving a mutant promoter library with a spectrum of strengths. We constructed genetic circuits with these parts and demonstrated their activation by multiple classes of redox molecules. Last, we demonstrated electrochemical activation of gene expression under aerobic conditions using a novel, modular bioelectrochemical device. These genetic and electrochemical tools facilitate the design and improve the performance of electrogenetic systems. Furthermore, the genetic design strategies used can be applied to other redox-responsive promoters to further expand the available tools for electrogenetics.

3D-printed hierarchical pillar array electrodes for high-performance semi-artificial photosynthesis.

The rewiring of photosynthetic biomachineries to electrodes is a forward-looking semi-artificial route for sustainable bio-electricity and fuel generation. Currently, it is unclear how the electrode and biomaterial interface can be designed to meet the complex requirements for high biophotoelectrochemical performance. Here we developed an aerosol jet printing method for generating hierarchical electrode structures using indium tin oxide nanoparticles. We printed libraries of micropillar array electrodes varying in height and submicrometre surface features, and studied the energy/electron transfer processes across the bio-electrode interfaces. When wired to the cyanobacterium Synechocystis sp. PCC 6803, micropillar array electrodes with microbranches exhibited favourable biocatalyst loading, light utilization and electron flux output, ultimately almost doubling the photocurrent of state-of-the-art porous structures of the same height. When the micropillars' heights were increased to 600 µm, milestone mediated photocurrent densities of 245 µA cm-2 (the closest thus far to theoretical predictions) and external quantum efficiencies of up to 29% could be reached. This study demonstrates how bio-energy from photosynthesis could be more efficiently harnessed in the future and provide new tools for three-dimensional electrode design.

A switch in species dominance of a recovering pelagic ecosystem.

Although many marine ecosystems have been adversely impacted by human activities,1 some are now recovering due to reductions in fishing pressure.2-4 Here, we document the recovery of an ecosystem subjected to intense anthropogenic activity for over 200 years, the Clyde Sea.5 This region once had productive fisheries for herring (Clupea harengus) and other fish, but these disappeared at the turn of the century.6,7 Using acoustic surveys of the pelagic ecosystem, we found that the Clyde Sea supports 100 times as many forage fish as in the late 1980s. However, herring has now been replaced by sprat (Sprattus sprattus), despite virtually no fishing on herring for 20 years. A combination of a warming sea,6 bycatch of herring in the prawn (Nephrops norvegicus) fishery,8,9 and susceptibility of herring to poor recruitment may have contributed to this unexpected recovery. We compare this to similar unexpected "recoveries" involving unforeseen ecosystem effects, such as the return of hake (Merluccius merluccius) to the North Sea;10,11 the recent expansion of the pelagic squat lobster, "munida," (Pleuroncodes monodon) off Peru;12 and the increase in scallop (Placopecten magellanicus) numbers on Georges Bank.13 The lack of a current sprat fishery in the Clyde presents a unique opportunity to develop an alternative industry for its seafaring community: ecotourism. Charismatic megafauna (whales, dolphins, and seabirds) that people will pay to see14 will, in time-if not already15,16-be drawn in by the abundance of forage fish now present, further restoring the biodiversity of the region after centuries of overexploitation.

Phenazines as model low-midpoint potential electron shuttles for photosynthetic bioelectrochemical systems.

Bioelectrochemical approaches for energy conversion rely on efficient wiring of natural electron transport chains to electrodes. However, state-of-the-art exogenous electron mediators give rise to significant energy losses and, in the case of living systems, long-term cytotoxicity. Here, we explored new selection criteria for exogenous electron mediation by examining phenazines as novel low-midpoint potential molecules for wiring the photosynthetic electron transport chain of the cyanobacterium Synechocystis sp. PCC 6803 to electrodes. We identified pyocyanin (PYO) as an effective cell-permeable phenazine that can harvest electrons from highly reducing points of photosynthesis. PYO-mediated photocurrents were observed to be 4-fold higher than mediator-free systems with an energetic gain of 200 mV compared to the common high-midpoint potential mediator 2,6-dichloro-1,4-benzoquinone (DCBQ). The low-midpoint potential of PYO led to O2 reduction side-reactions, which competed significantly against photocurrent generation; the tuning of mediator concentration was important for outcompeting the side-reactions whilst avoiding acute cytotoxicity. DCBQ-mediated photocurrents were generally much higher but also decayed rapidly and were non-recoverable with fresh mediator addition. This suggests that the cells can acquire DCBQ-resistance over time. In contrast, PYO gave rise to steadier current enhancement despite the co-generation of undesirable reactive oxygen species, and PYO-exposed cells did not develop acquired resistance. Moreover, we demonstrated that the cyanobacteria can be genetically engineered to produce PYO endogenously to improve long-term prospects. Overall, this study established that energetic gains can be achieved via the use of low-potential phenazines in photosynthetic bioelectrochemical systems, and quantifies the factors and trade-offs that determine efficacious mediation in living bioelectrochemical systems.

High-throughput in situ experimental phasing.

In this article, a new approach to experimental phasing for macromolecular crystallography (MX) at synchrotrons is introduced and described for the first time. It makes use of automated robotics applied to a multi-crystal framework in which human intervention is reduced to a minimum. Hundreds of samples are automatically soaked in heavy-atom solutions, using a Labcyte Inc. Echo 550 Liquid Handler, in a highly controlled and optimized fashion in order to generate derivatized and isomorphous crystals. Partial data sets obtained on MX beamlines using an in situ setup for data collection are processed with the aim of producing good-quality anomalous signal leading to successful experimental phasing.

The Development of Biophotovoltaic Systems for Power Generation and Biological Analysis.

Biophotovoltaic systems (BPVs) resemble microbial fuel cells, but utilise oxygenic photosynthetic microorganisms associated with an anode to generate an extracellular electrical current, which is stimulated by illumination. Study and exploitation of BPVs have come a long way over the last few decades, having benefited from several generations of electrode development and improvements in wiring schemes. Power densities of up to 0.5 W m-2 and the powering of small electrical devices such as a digital clock have been reported. Improvements in standardisation have meant that this biophotoelectrochemical phenomenon can be further exploited to address biological questions relating to the organisms. Here, we aim to provide both biologists and electrochemists with a review of the progress of BPV development with a focus on biological materials, electrode design and interfacial wiring considerations, and propose steps for driving the field forward.