Activities of cellulose acetate and microcrystalline cellulose on the thermal and morphomechanical performances of a biobased hybrid composite made polybutylene succinate.

Microcrystalline cellulose (MCC-30 wt%) was extruded with a blend of polybutylene succinate (PBS) and cellulose acetate (CADS=2.5-20 wt%) to produce two grades of binary (PBS/CA, PBS/MCC) and ternary (PBS/CA/MCC) specimens by injection into a mold previously thermostated at 22 °C and 78 °C. The structure-property relationships of neat PBS (n-PBS) and PBS-based blends were investigated by Fourier transform infrared (FTIR) spectroscopy, diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, scanning electron microscopy (SEM), rheology, differential scanning calorimetry (DSC), thermogravimetry, and mechanical (tensile, bending) tests. FTIR/DRIFT outcomes revealed physical interactions between the ingredients through hydrogen bonds. Rheology and SEM evidenced the presence of entanglements and micro-voids absent in n-PBS. Non-isothermal DSC showed that 22 °C-molded formulations displayed crystalline degrees higher than 78 °C-specimens, except for PBS/MCC. DSC-isothermal analysis showed a hindrance effect of CA on PBS/CA crystallinity and a nucleating impact of MCC on PBS/MCC. Tensile and bending moduli increased for both material grades while the elongation at break decreased. Entanglements and micro-voids had detrimental effects on stress levels because the maximum tensile strength decreased when each or both biofillers were added to PBS. These structural configurations were beneficial for bending strengths since all blends' stiffness relatively increased regardless of material grade.

Multi Scale Analysis of the Retting and Process Effect on the Properties of Flax Bio-Based Composites.

This research aimed to evaluate, at different scales (technical flax fiber, fiber band and flax composites, bio-based composites), the effect of retting and processing parameters on the biochemical, microstructural, and mechanical properties of flax-epoxy bio-based materials. On the technical flax fiber scale, a biochemical alteration of the fiber was observed as the retting increased (a decrease of the soluble fraction from 10.4 ± 0.2 to 4.5 ± 1.2% and an increase of the holocellulose fractions). This finding was associated with the degradation of the middle lamella, favoring the individualization of the flax fibers observed at retting (+). A direct link was established between the biochemical alteration of technical flax fibers and their associated mechanical properties (decrease of the ultimate modulus 69.9 to 43.6 GPa and maximum stress from 702 to 328 MPa). On the flax band scale, the mechanical properties are driven by the interface quality between the technical fibers. The highest maximum stresses were reached at level retting (0) with 26.68 MPa, which is lower compared to technical fiber. On the bio-based composites scale, setup 3 (T = 160 ∘C) and the high retting level (+) are the most relevant for a better mechanical response of flax bio-based materials.

How Retting Could Affect the Mechanical Behavior of Flax/Epoxy Biocomposite Materials?

This study focuses on the retting effect on the mechanical properties of flax biobased materials. For the technical fiber, a direct link was established between the biochemical alteration of technical flax and their mechanical properties. In function of the retting level, technical fibers appeared smoother and more individualized; nevertheless, a decrease in the ultimate modulus and maximum stress was recorded. A biochemical alteration was observed as the retting increased (a decrease in the soluble fraction from 10.4 ± 0.2 to 4.5 ± 1.2% and an increase in the holocellulose fractions). Regarding the mechanical behavior of biocomposites manufactured by thermocompression, a non-elastic behavior was observed for the tested samples. Young moduli (E1 and E2) gradually increased with retting. The retting effect was more pronounced when a normalization was performed (according to the fiber volume and porosity). A 40% increase in elastic modulus could be observed between under-retting (-) and over-retting (+). Moreover, the porosity content (Vp) increased overall with fiber content. Setup 3, with optimized processing parameters, was the most desirable processing protocol because it allowed the highest fiber fraction (Vf) for the lowest Vp.

Comparing mixed models and Random Forest association tests using naturalgwas and a Striped Bass SNP data set.

In this study, we used the phenotype simulation package naturalgwas to test the performance of Zhao's Random Forest method in comparison to an uncorrected Random Forest test, latent factor mixed models (LFMM), genome-wide efficient mixed models (GEMMA), and confounder adjusted linear regression (CATE). We created 400 sets of phenotypes, corresponding to five effect sizes and two, five, 15, or 30 causal loci, simulated from two empirical data sets containing SNPs from Striped Bass representing three and 13 populations. All association methods were evaluated for their ability to detect genotype-phenotype associations based on power, false discovery rates, and number of false positives. Genomic inflation was highest for uncorrected Random Forest and LFMM tests and lowest for Gemma and Zhao's Random Forest. All association tests had similar power to detect causal loci, and Zhao's Random Forest had the lowest false discovery rate in all scenarios. To measure the performance of association tests in small data sets with few loci surrounding a causal gene we also ran analyses again after removing causal loci from each data set. All association tests were only able to find true positives, defined as loci located within 30 kbp of a causal locus, in 3%-18% of simulations. In contrast, at least one false positive was found in 17%-44% of simulations. Zhao's Random Forest again identified the fewest false positives of all association tests studied. The ability to test the power of association tests for individual empirical data sets can be an extremely useful first step when designing a GWAS study.

Towards the Hydrophobization of Thermoplastic Starch Using Fatty Acid Starch Ester as Additive.

To bring surface hydrophobicity to thermoplastic starch (TPS) materials for food packaging, fatty acid starch esters (FASE), specifically starch tri-laurate, were incorporated into TPS formulations. A total of three different ratios of FASE (2%, 5% and 10%) were added to the TPS formulation to evaluate the influence of FASE onto physico-chemical properties of TPS/FASE blends, i.e., surface hydrophobicity, dynamic vapor sorption (DVS), and tensile behaviors. Blending TPS with FASE leads to more hydrophobic materials, whatever the FASE ratio, with initially measured contact angles ranging from 90° for the 2%-FASE blend to 99° for the 10%-blend. FT-IR study of the material surface and inner core shows that FASE is mainly located at the material surface, justifying the increase of material surface hydrophobicity. Despite this surface hydrophobicity, blending TPS with FASE seems not to affect blend vapor sorption behavior. From a mechanical behavior perspective, the variability of tensile properties of starch-based materials with humidity rate is slightly reduced with increasing FASE ratio (a decrease of maximal stress of 10-30% was observed for FASE ratio 2% and 10%), leading to more ductile materials.

Cell Wall Composition of Hemp Shiv Determined by Physical and Chemical Approaches.

The use of agricultural by-products in the building engineering realm has led to an increase in insulation characteristics of biobased materials and a decrease in environmental impact. The understanding of cell wall structure is possible by the study of interactions of chemical compounds, themselves determined by common techniques like Van Soest (VS). In this study, a global method is investigated to characterise the cell wall of hemp shiv. The cell wall molecules were, at first, isolated by fractionation of biomass and then analysed by physical and chemical analysis (Thermal Gravimetric Analysis, Elementary Analysis, Dynamic Sorption Vapor and Infra-Red). This global method is an experimental way to characterise plant cell wall molecules of fractions by Thermal Gravimetric Analysis following by a mathematical method to have a detailed estimation of the cell wall composition and the interactions between plant macromolecules. The analyzed hemp shiv presents proportions of 2.5 ± 0.6% of water, 4.4 ± 0.2% of pectins, 42.6 ± 1.0% (Hemicellulose-Cellulose), 18.4 ± 1.6% (Cellulose-Hemicellulose), 29.0 ± 0.8% (Lignin-Cellulose) and 2.0 ± 0.4% of linked lignin.

Genomic population structure of Striped Bass (Morone saxatilis) from the Gulf of St. Lawrence to Cape Fear River.

Striped Bass, Morone saxatilis (Walbaum, 1792), is an anadromous fish species that supports fisheries throughout North America and is native to the North American Atlantic Coast. Due to long coastal migrations that span multiple jurisdictions, a detailed understanding of population genomics is required to untangle demographic patterns, understand local adaptation, and characterize population movements. This study used 1,256 single nucleotide polymorphism (SNP) loci to investigate genetic structure of 477 Striped Bass sampled from 15 locations spanning the North American Atlantic coast from the Gulf of St. Lawrence, Canada, to the Cape Fear River, United States. We found striking differences in neutral divergence among Canadian sites, which were isolated from each other and US populations, compared with US populations that were much less isolated. Our SNP dataset was able to assign 99% of Striped Bass back to six reporting groups, a 39% improvement over previous genetic markers. Using this method, we found (a) evidence of admixture within Saint John River, indicating that migrants from the United States and from Shubenacadie River occasionally spawn in the Saint John River; (b) Striped Bass collected in the Mira River, Cape Breton, Canada, were found to be of both Miramichi River and US origin; (c) juveniles in the newly restored Kennebec River population had small and nonsignificant differences from the Hudson River; and (d) tributaries within the Chesapeake Bay showed a mixture of homogeny and small differences among each other. This study introduces new hypotheses about the dynamic zoogeography of Striped Bass at its northern range and has important implications for the local and international management of this species.

Population structure of Purple Sandpipers (Calidris maritima) as revealed by mitochondrial DNA and microsatellites.

The Purple Sandpiper (Calidris maritima) is a medium-sized shorebird that breeds in the Arctic and winters along northern Atlantic coastlines. Migration routes and affiliations between breeding grounds and wintering grounds are incompletely understood. Some populations appear to be declining, and future management policies for this species will benefit from understanding their migration patterns. This study used two mitochondrial DNA markers and 10 microsatellite loci to analyze current population structure and historical demographic trends. Samples were obtained from breeding locations in Nunavut (Canada), Iceland, and Svalbard (Norway) and from wintering locations along the coast of Maine (USA), Nova Scotia, New Brunswick, and Newfoundland (Canada), and Scotland (UK). Mitochondrial haplotypes displayed low genetic diversity, and a shallow phylogeny indicating recent divergence. With the exception of the two Canadian breeding populations from Nunavut, there was significant genetic differentiation among samples from all breeding locations; however, none of the breeding populations was a monophyletic group. We also found differentiation between both Iceland and Svalbard breeding populations and North American wintering populations. This pattern of divergence is consistent with a previously proposed migratory pathway between Canadian breeding locations and wintering grounds in the United Kingdom, but argues against migration between breeding grounds in Iceland and Svalbard and wintering grounds in North America. Breeding birds from Svalbard also showed a genetic signature intermediate between Canadian breeders and Icelandic breeders. Our results extend current knowledge of Purple Sandpiper population genetic structure and present new information regarding migration routes to wintering grounds in North America.

Method simple: An electronic interactive tool helping nursing students prepare for written and oral presentation.

BACKGROUND: Developing reflective writing skills is an essential competency in nursing. Nursing schools recognize the importance of promoting scholarly thinking and academic writing amongst their student yet, there is a large gap in the tools and opportunities students receive to help them master these skills during their baccalaureate studies. Method SIMPLE is an innovative and interactive web based tool introduced in first year that can help nursing students prepare university papers both written and oral. AIM OF THE STUDY: To discover how students learn to use the tool, what barriers affect proper use of the tool, and what role faculty plays in ensuring students' successful use of the tool. The study also sought to explore students' perception in regards to the contribution of the tool to improve their academic work. RESEARCH METHOD USED: Data was collected using two research methodologies. Method SIMPLE has a built-in satisfaction survey at the end of each of the six modules that provides quantitative and qualitative data about the tool itself. A qualitative descriptive study was chosen to better understand student and faculty's perceptions regarding the tool. Data was collected during three focus groups. CONCLUSIONS AND RECOMMENDATIONS: Students shared their experiences using the tool and talked at length about the importance Method SIMPLE's section "P" which explains in depth how to submit written papers. Participants recognized the benefits of having a web based tool. Results from the built-in evaluation surveys and descriptive analysis of the focus groups data also helped generate three types of recommendations: ways to enhance the tool itself, ways to enhance students' experience when using the tool and faculty's responsibility in helping students learn how to use the tool.

Structural investigation and thermal stability of new extruded wheat flour based polymeric materials.

In this study, we compare physical properties of wheat starch and wheat-flour based materials. The comparison has been done using thermogravimetric, calorimetric, X-ray diffraction, mechanic and morphologic experiments conducted on a series of wheat-flour extruded materials. The wheat flour used here can be understood as a by-product of the farm-produce wheat flour. All data obtained by means of these experimental methods allow us to conclude that, basically no significant difference exists between our wheat-flour based and wheat-starch based materials. Only one clear difference occurs for the strain to break value which decreases by about 30% for wheat-flour based materials.

Iron-superoxide dismutase and monodehydroascorbate reductase transcripts accumulate in response to internode rubbing in tomato.

A cDNA encoding an iron-superoxide dismutase (Fe-SOD) was isolated by RACE-PCR from a Lycopersicon esculentum cDNA library. The Fe-SOD cDNA consists of a 746-bp open reading frame and is predicted to encode a protein of 249 amino acids with a calculated molecular mass of 27.9 kDa. The deduced amino acid sequence was very similar to other plant Fe-SODs and a potential chloroplastic targeting was found. To study the induction of oxidative burst in response to mechanical stimulation, the accumulation of Fe-SOD and monodehydroascorbate reductase (MDHAR) mRNAs was analysed in response to young growing internode rubbing in tomato plants. Northern analyses show that Fe-SOD mRNA and MDHAR mRNA accumulated in tomato internodes 10 min after the mechanical stimulation. These results suggest that reactive oxygen species are early involved in the response of a plant to a mechanical stimulation, such as rubbing. The nucleotide sequence data reported in this paper will appear in the NCBI Nucleotide Sequence Databases under the accession number AY262025.

Two GPX-like proteins from Lycopersicon esculentum and Helianthus annuus are antioxidant enzymes with phospholipid hydroperoxide glutathione peroxidase and thioredoxin peroxidase activities.

This study investigated the enzymatic function of two putative plant GPXs, GPXle1 from Lycopersicon esculentum and GPXha2 from Helianthus annuus, which show sequence identities with the mammalian phospholipid hydroperoxide glutathione peroxidase (PHGPX). Both purified recombinant proteins expressed in Escherichia coli show PHGPX activity by reducing alkyl, fatty acid and phospholipid hydroperoxides but not hydrogen peroxide in the presence of glutathione. Interestingly, both recombinant GPXle1 and GPXha2 proteins also reduce alkyl, fatty acid and phospholipid hydroperoxides as well as hydrogen peroxide using thioredoxin as reducing substrate. Moreover, thioredoxin peroxidase (TPX) activities were found to be higher than PHGPX activities in terms of efficiency and substrate affinities, as revealed by their respective Vmax and Km values. We therefore conclude that these two plant GPX-like proteins are antioxidant enzymes showing PHGPX and TPX activities.