Effects of Hydrogen Plasma Treatment on the Electrical Behavior of Solution-Processed ZnO Thin Films.

In this study, the effect of atmospheric hydrogen plasma treatment on the in-plane conductivity of solution-processed zinc oxide (ZnO) in various environments is reported. The hydrogen-plasma-treated and untreated ZnO films exhibited ohmic behavior with room-temperature in-plane conductivity in a vacuum. When the untreated ZnO film was exposed to a dry oxygen environment, the conductivity rapidly decreased, and an oscillating current was observed. In certain cases, the thin film reversibly 'switched' between the high- and low-conductivity states. In contrast, the conductivity of the hydrogen-plasma-treated ZnO film remained nearly constant under different ambient conditions. We infer that hydrogen acts as a shallow donor, increasing the carrier concentration and generating oxygen vacancies by eliminating the surface contamination layer. Hence, atmospheric hydrogen plasma treatment could play a crucial role in stabilizing the conductivity of ZnO films.

Advances in biomedical applications of vitamin D for VDR targeted management of obesity and cancer.

BACKGROUND: 1,25(OH)2D3 is a fat-soluble vitamin, involved in regulating Ca2+ homeostasis in the body. Its storage in adipose tissue depends on the fat content of the body. Obesity is the result of abnormal lipid deposition due to the prolonged positive energy balance and increases the risk of several cancer types. Furthermore, it has been associated with vitamin D deficiency and defined as a low 25(OH)2D3 blood level. In addition, 1,25(OH)2D3 plays vital roles in Ca2+-Pi and glucose metabolism in the adipocytes of obese individuals and regulates the expressions of adipogenesis-associated genes in mature adipocytes. SCOPE AND APPROACH: The present contribution focused on the VDR mediated mechanisms interconnecting the obese condition and cancer proliferation due to 1,25(OH)2D3-deficiency in humans. This contribution also summarizes the identification and development of molecular targets for VDR-targeted drug discovery. KEY FINDINGS AND CONCLUSIONS: Several studies have revealed that cancer development in a background of 1,25(OH)2D3 deficient obesity involves the VDR gene. Moreover, 1,25(OH)2D3 is also known to influence several cellular processes, including differentiation, proliferation, and adhesion. The multifaceted physiology of obesity has improved our understanding of the cancer therapeutic targets. However, currently available anti-cancer drugs are notorious for their side effects, which have raised safety issues. Thus, there is interest in developing 1,25(OH)2D3-based therapies without any side effects.

Palsy of Both the Tibial Nerve and Common Peroneal Nerve Caused by a Ganglion Cyst in the Popliteal Area.

A ganglion cyst is a benign mass consisting of high-viscosity mucinous fluid. It can originate from the sheath of a tendon, peripheral nerve, or joint capsule. Compressive neuropathy caused by a ganglion cyst is rarely reported, with the majority of documented cases involving peroneal nerve palsy. To date, cases demonstrating both peroneal and tibial nerve palsies resulting from a ganglion cyst forming on a branch of the sciatic nerve have not been reported. In this paper, we present the case of a 74-year-old man visiting an outpatient clinic complaining of left-sided foot drop and sensory loss in the lower extremity, a lack of strength in his left leg, and a decrease in sensation in the leg for the past month without any history of trauma. Ankle dorsiflexion and great toe extension strength on the left side were Grade I. Ankle plantar flexion and great toe flexion were Grade II. We suspected peroneal and tibial nerve palsy and performed a screening ultrasound, which is inexpensive and rapid. In the operative field, several cysts were discovered, originating at the site where the sciatic nerve splits into peroneal and tibial nerves. After successful surgical decompression and a series of rehabilitation procedures, the patient's neurological symptoms improved. There was no recurrence.

Highly visible-light-active sulfur and carbon co-doped TiO2 (SC-TiO2) heterogeneous photocatalysts prepared by underwater discharge plasma.

To promptly and simply create highly crystalline S/C co-doped TiO2 (SC-TiO2) photocatalysts at room temperature and atmospheric pressure, we suggest a novel plasma-assisted sol-gel synthesis method. This method is a simultaneous synthetic process, in which an underwater plasma undergoes continuous reactions to generate high-energy atomic and molecular species that enable TiO2 to achieve crystallinity, a large surface area, and a heterogeneous structure within a few minutes. In particular, it was demonstrated that the heterogeneously structured TiO2 was formed by doping that sulfur and carbon replace O or Ti atoms in the TiO2 lattice depending on the composition of the synthesis solution during underwater plasma treatment. The resultant SC-TiO2 photocatalysts had narrowed bandgap energies and extended optical absorption scope into the visible range by inducing the intermediate states within bandgap due to generation of oxygen vacancies on the surface of TiO2 through synthesis, crystallization, and doping. Correspondingly, SC-TiO2 showed a significant degradation efficiency ([k] = 6.91 h-1) of tetracycline (TC, antibiotics) under solar light irradiation, up to approximately 4 times higher compared to commercial TiO2 ([k] = 1.68 h-1), resulting in great water purification. Therefore, we anticipate that this underwater discharge plasma system will prove to be an advantageous technique for producing heterostructural TiO2 photocatalysts with superior photocatalytic efficiency for environmental applications.

WS2-intercalated Ti3C2Tx MXene/TiO2-stacked hybrid structure as an excellent sonophotocatalyst for tetracycline degradation and nitrogen fixation.

Designing a heterostructure nanoscale catalytic site to facilitate N2 adsorption and photogenerated electron transfer would maximize the potential for photocatalytic activity and N2 reduction reactions. Herein, we have explored the interfacial TiO2 nanograins between the Ti3C2TxMXene-WS2 heterostructure and addressed the beneficial active sites to expand the effective charge transfer rate and promote sonophotocatalytic N2 fixation. Benefiting from the interfacial contact and dual heterostructure interface maximizes the photogenerated carrier separation between WS2 and MXene/TiO2. The sonophotocatalytic activity of the MXene@TiO2/WS2 hybrid, which was assessed by examining the photoreduction of N2 with ultrasonic irradiation, was much higher than that of either sonocatalytic and photocatalytic activity because of the synergistic sonocatalytic effect under photoirradiation. The Schottky junction between the MXene and TiO2 on the hybrid MXene/TiO2-WS2 heterostructure resulted in the sonophotocatalytic performance through effective charge transfer, which is 1.47 and 1.24 times greater than MXene-WS2 for nitrogen fixation and pollutant degradation, respectively. Under the sonophotocatalytic process, the MXene/TiO2-WS2 heterostructure exhibits a decomposition efficiency of 98.9 % over tetracycline in 90 min, which is 5.46, 1.73, and 1.10 times greater than those of sonolysis, sonocatalysis, and photocatalysis, respectively. The production rate of NH3 on MXene/TiO2-WS2 reached 526 µmol g-1h-1, which is 3.17, 3.61, and 1.47 times higher than that of MXene, WS2, and MXene-WS2, respectively. The hybridized structure of MXene-WS2 with interfacial surface oxidized TiO2 nanograins minimizes the band potential and improves photocarrier use efficiency, contributing directly to the remarkable catalytic performance towards N2 photo fixation under visible irradiation under ultrasonic irradiation. This report provides the strategic outcome for the mass carrier transfer rate and reveals a high conversion efficiency in the hybridized heterostructure.

Layered hydrated-titanium-oxide-laden reduced graphene oxide composite as a high-performance negative electrode for selective extraction of Li via membrane capacitive deionization.

In this work, we initially prepared layered lithium titanate (Li2TiO3) using a solid-state reaction. Then Li+ of Li2TiO3 were acid-eluded with Hydrochloric acid to obtain hydrated titanium oxide (H2TiO3). Different weight percentages (50%, 60%, 70%, 80%, and 90%) of the as-prepared H2TiO3 were deposited on a conductive reduced graphene oxide (rGO) matrix to obtain a series of rGO/ H2TiO3 composites. Of the prepared composites, rGO/H2TiO3-60% showed excellent current density, high specific capacitance, and rapid ion diffusion. An asymmetric MCDI (membrane capacitive deionization) cell fabricated with activated carbon as the anode and rGO/H2TiO3-60% as the cathode displayed outstanding Li+ electrosorption capacity (13.67 mg g-1) with a mean removal rate of 0.40 mg g-1 min-1 in a 10 mM LiCl aqueous solution at 1.8 V. More importantly, the rGO/H2TiO3-60% composite electrode exhibited exceptional Li+ selectivity, superior cyclic stability up to 100,000 s, and a Li+ sorption capacity retention of 96.32% after 50 adsorption/desorption cycles. The excellent Li+ extraction obtained by MCDI using the rGO/H2TiO3-60% negative electrode was putatively attributed to: (i) ion exchange between Li+ and H+ of H2TiO3; (ii) the presence of narrow lattice spaces in H2TiO3 suitable for selective Li+ capture; (iii) capture of Li+ by isolated and hydrogen-bonded hydroxyl groups of H2TiO3; and (iv) enhanced interfacial contact and transfer of large numbers of Li+ ions from the electrolyte to H2TiO3 achieved by compositing H2TiO3 with a highly conductive rGO matrix.

A Bioactive Compound-Loaded Zinc-Aminoclay Encapsulated, Pickering Emulsion System for Treating Acne-Inducing Microbes.

Acne is a common skin condition caused by the growth of certain bacteria. Many plant extracts have been investigated for their potential to combat acne-inducing microbes, and one such plant extract is microwave-assisted Opuntia humifusa extract (MA-OHE). The MA-OHE was loaded onto zinc-aminoclay (ZnAC) and encapsulated in a Pickering emulsion system (MA-OHE/ZnAC PE) to evaluate its therapeutic potential against acne-inducing microbes. Dynamic light scattering and scanning electron microscopy were used to characterize MA-OHE/ZnAC PE with a mean particle diameter of 353.97 nm and a PDI of 0.629. The antimicrobial effect of MA-OHE/ZnAC was evaluated against Staphylococcus aureus (S. aureus) and Cutibacterium acnes (C. acnes), which contribute to acne inflammation. The antibacterial activity of MA-OHE/ZnAC was 0.1 and 0.025 mg/mL to S. aureus and C. acnes, respectively, which were close to naturally derived antibiotics. Additionally, the cytotoxicity of MA-OHE, ZnAC, and MA-OHE/ZnAC was tested, and the results showed that they had no cytotoxic effects on cultured human keratinocytes in a range of 10-100 µg/mL. Thus, MA-OHE/ZnAC is suggested to be a promising antimicrobial agent for treating acne-inducing microbes, while MA-OHE/ZnAC PE is a potentially advantageous dermal delivery system.

High removal efficiency of industrial toxic compounds through stable catalytic reactivity in water treatment system.

We identified optimal conditions for the disposal of high concentration of organic contaminants within a short time using a hybrid advanced oxidation process (AOP) combining various oxidizing agents. Plasma-treated water (PTW) containing many active species, that play dominant roles in the degradation of organic substances like hydroxyl radicals, atomic oxygen, ozone, and hydrogen peroxide, was used in this study as a strategy to improve degradation performance without the use of expensive chemical reagents like hydrogen peroxide. In particular, the optimal decomposition conditions using PTW, which were combined with 10 mg/h ozone, 2 g/L iron oxide, and 4 W UV light, demonstrated excellent removal abilities of a high concentration of reactive black 5 (RB5; 100 mg/L, >99%, [k] = 4.15 h-1) and tetracycline (TC; 10 mg/L, >96.5%, [k] = 3.35 h-1) for 25 min, approximately 1.5 times higher than that without PTW (RB5; 100 mg/L, 94%, [k] = 2.80 h-1). These results confirmed that the production of strong reactive hydroxyl radicals from the decomposition process, as well as various reactive species included in PTW efficiently attacked pollutant substances, resulting in a higher removal rate. This suggests that a water treatment system with this optimal condition based on complex AOP systems using PTW could be useful in critical environmental and biomedical applications.

Accelerated Learning in Wide-Band-Gap AlN Artificial Photonic Synaptic Devices: Impact on Suppressed Shallow Trap Level.

Artificial synaptic platforms are promising for next-generation semiconductor computing devices; however, state-of-the-art optoelectronic approaches remain challenging, owing to their unstable charge trap states and limited integration. We demonstrate wide-band-gap (WBG) III-V materials for photoelectronic neural networks. Our experimental analysis shows that the enhanced crystallinity of WBG synapses promotes better synaptic characteristics, such as effective multilevel states, a wider dynamic range, and linearity, allowing the better power consumption, training, and recognition accuracy of artificial neural networks. Furthermore, light-frequency-dependent memory characteristics suggest that artificial optoelectronic synapses with improved crystallinity support the transition from short-term potentiation to long-term potentiation, implying a clear emulation of the psychological multistorage model. This is attributed to the charge trapping in deep-level states and suppresses fast decay and nonradiative recombination in shallow traps. We believe that the fingerprints of these WBG synaptic characteristics provide an effective strategy for establishing an artificial optoelectronic synaptic architecture for innovative neuromorphic computing.

A Novel Photocatalyst Composite of Magnesium Aminoclay and TiO2 Immobilized into Activated Carbon Fiber (ACF) Matrix for Pollutant Removal.

Titanium dioxide (TiO2) is a semiconductor photocatalyst widely applied in numerous fields due to possessing prominent photocatalytic properties. However, its practical applications in the form of nanoparticles or powders still have remained several limitations. Recently, novel photocatalytic porous composites have been discovered to be potential alternative approaches. In the present study, nanostructured magnesium-aminoclay-based TiO2 (MgAC-TiO2) was successfully deposited on an activated carbon fiber (ACF) matrix using the sol-gel approach followed by calcination at 350°C in an air atmosphere. The structure and photocatalytic activity of this as-prepared photocatalyst composite were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), the Brunauer-Emmett-Teller (BET), and UV-vis diffuse reflectance spectral analysis. The photocatalytic activity of MgAC-TiO2/ACF was investigated under batch conditions for the removal of methylene blue (MB) in solution under UV irradiation and dark conditions. The results revealed that MB is absorbed by MgAC-TiO2/ACF and that its photodecomposition occurs under UV irradiation. The addition of MgAC can prevent the sintering of TiO2 act as a dispersing agent to create a high specific surface area, and thus enhance photocatalytic efficiency. In addition, ACF in the MgAC-TiO2/ACF composite can additionally improve the photocatalytic activity by hindering electron-hole recombination, which is known as a synergetic effect, and thereby enhancing the photodegradation and removal efficiency of MB.

Biocompatible liquid-type carbon nanodots (C-paints) as light delivery materials for cell growth and astaxanthin induction of Haematococcus pluvialis.

In this study, we aimed to demonstrate the feasibility of the application of biocompatible liquid type fluorescent carbon nanodots (C-paints) to microalgae by improving microalgae productivity. C-paints were prepared by a simple process of ultrasound irradiation using polyethylene glycol (PEG) as a passivation agent. The resulting C-paints exhibited a carbonyl-rich surface with good uniformity of particle size, excellent water solubility, photo-stability, fluorescence efficiency, and good biocompatibility (<10.0 mg mL-1 of C-paints concentration). In the practical application of C-paints to microalgae culture, the most effective and optimized condition leading to growth promoting effect was observed at a C-paints concentration of 1.0 mg mL-1 (>20% higher than the control cell content). A C-paints concentration of 1-10.0 mg mL-1 induced an approximately >1.8 times higher astaxanthin content than the control cells. The high light delivery effect of non-cytotoxic C-paints was applied as a stress condition for H. pluvialis growth and was found to play a major role in enhancing productivity. Notably, the results from this study are an essential approach to improve astaxanthin production, which can be used in various applications because of its therapeutic effects such as cancer prevention, anti-inflammation, immune stimulation, and treatment of muscle-soreness.

Current Transport Mechanism in Palladium Schottky Contact on Si-Based Freestanding GaN.

In this study, the charge transport mechanism of Pd/Si-based FS-GaN Schottky diodes was investigated. A temperature-dependent current-voltage analysis revealed that the I-V characteristics of the diodes show a good rectifying behavior with a large ratio of 103-105 at the forward to reverse current at ±1 V. The interface states and non-interacting point defect complex between the Pd metal and FS-GaN crystals induced the inhomogeneity of the barrier height and large ideality factors. Furthermore, we revealed that the electronic conduction of the devices prefers the thermionic field emission (TFE) transport, not the thermionic emission (TE) model, over the entire measurement conditions. The investigation on deep level transient spectroscopy (DLTS) suggests that non-interacting point-defect-driven tunneling influences the charge transport. This investigation about charge transport paves the way to achieving next-generation optoelectronic applications using Si-based FS-GaN Schottky diodes.

Highly Efficient Excitonic Recombination of Non-polar ([Formula: see text]) GaN Nanocrystals for Visible Light Emitter by Hydride Vapour Phase Epitaxy.

While non-polar nanostructured-GaN crystals are considered as a prospective material for the realization of futuristic opto-electronic application, the formation of non-polar GaN nanocrystals (NCs) with highly efficient visible emission characteristics remain unquestionable up to now. Here, we report the oxygen-incorporated a-plane GaN NCs with highly visible illumination excitonic recombination characteristics. Epitaxially aligned a-plane NCs with average diameter of 100 nm were formed on r-plane sapphire substrates by hydride vapor phase epitaxy (HVPE), accompanied by the oxygen supply during the growth. X-ray photoemission spectroscopy measurements proved that the NCs exhibited Ga-O bonding in the materials, suggesting the formation of oxidized states in the bandgap. It was found that the NCs emitted the visible luminescence wavelength of 400‒500 nm and 680‒720 nm, which is attributed to the transition from oxygen-induced localized states. Furthermore, time-resolved photoluminescence studies revealed the significant suppression of the quantum confined Stark effect and highly efficient excitonic recombination within GaN NCs. Therefore, we believe that the HVPE non-polar GaN NCs can guide the simple and efficient way toward the nitride-based next-generation nano-photonic devices.

Quantitative Monitoring of Tattoo Contrast Variations after 755-nm Laser Treatments in In Vivo Tattoo Models.

Laser lights have been used by dermatologists for tattoo removal through photothermal interactions. However, most clinical studies used a visual scoring method to evaluate the tattoo removal process less objectively, leading to unnecessary treatments. This study aimed to develop a simple and quantitative imaging method to monitor the degree of tattoo removal in in vivo skin models. Sprague Dawley rat models were tattooed with four different concentrations of black inks. Laser treatment was performed weekly on the tattoos using a wavelength of 755 nm over six weeks. Images of non-treated and treated samples were captured using the same method after each treatment. The intensities of the tattoos were measured to estimate the contrast for quantitative comparison. The results demonstrated that the proposed monitoring method quantified the variations in tattoo contrast after the laser treatment. Histological analysis validated the significant removal of tattoo inks, no thermal injury to adjacent tissue, and uniform remodeling of epidermal and dermal layers after multiple treatments. This study demonstrated the potential of the quantitative monitoring technique in assessing the degree of clearance level objectively during laser treatments in clinics.

Comparison of cytotoxicity of black phosphorus nanosheets in different types of fibroblasts.

BACKGROUND: Two-dimensional black phosphorus nanosheets (BPNSs) have recently emerged as a successive novel nanomaterial owing to their uniqueness in optical and electrical properties. Although BPNSs have found a wide range of biomedical applications, their biosafety is still a major concern to be addressed. METHODS: In this study, we have prepared layered BPNSs using liquid exfoliation procedure, and evaluated their physicochemical properties using Fourier Transform-infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy, and Zetasizer analyses. We have investigated potential cytotoxicity of BPNSs against three different types of fibroblast cells, i.e. mouse embryonic fibroblast (NIH3T3), primary cultured normal human dermal fibroblast (nHDF), and fibrosarcoma (HT1080). Cell counting kit-8 (CCK-8) assay was carried out to assess cellular metabolic activity in cells whereas lactate dehydrogenase (LDH) activity assay was helpful to study plasma membrane integrity. RESULTS: Our salient research findings showed that BPNSs were polydispersed in solution due to aggregation. Toxic response of BPNSs against fibroblast cells was in the order, HT1080>nHDF>NIH3T3. The nanosheets reduced the number of cancerous cells with significant difference to normal cells. CONCLUSIONS: We suggest that BPNSs can be considered for cancer treatment as they destroy cancerous cells effectively. However, a comprehensive study is required to elucidate other biological effects of BPNSs.

Author Correction: Synthesis of MgAC-Fe3O4/TiO2 hybrid nanocomposites via sol-gel chemistry for water treatment by photo-Fenton and photocatalytic reactions.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Synthesis of MgAC-Fe3O4/TiO2 hybrid nanocomposites via sol-gel chemistry for water treatment by photo-Fenton and photocatalytic reactions.

MgAC-Fe3O4/TiO2 hybrid nanocomposites were synthesized in different ratios of MgAC-Fe3O4 and TiO2 precursor. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray fluorescence spectrometry (XRF), electron spin resonance spectrometry (ESR), Brunauer-Emmett-Teller (BET), photoluminescence (PL), and UV photoelectron spectroscopy (UPS) were used to characterize the nanocomposites. The increase of MgAC-Fe3O4, in the hybrid nanocomposites' core-shell structure, led to the decrease of anatase TiO2 peaks, thus reducing the photo-Fenton and photocatalytic activities. According to the obtained data, MgAC-Fe3O4 [0.05 g]/TiO2 showed the best photo-Fenton and photocatalytic activities, having removed ~93% of MB (photo-Fenton reaction) and ~80% of phenol (photocatalytic reaction) after 20 and 80 mins, respectively. On the pilot scale (30 L), MgAC-Fe3O4 [0.05 g]/TiO2 was completely removed after 27 and 30 hours by the photo-Fenton and photocatalytic activities, respectively. The synergistic effect gained from the combined photo-Fenton and photocatalytic activities of Fe3O4 and TiO2, respectively, was credited for the performances of the MgAC-Fe3O4/TiO2 hybrid nanocomposites.

First observation of electronic trap levels in freestanding GaN crystals extracted from Si substrates by hydride vapour phase epitaxy.

The electronic deep level states of defects embedded in freestanding GaN crystals exfoliated from Si substrates by hydride vapour phase epitaxy (HVPE) is investigated for the first time, using deep level transient spectroscopy (DLTS). The electron traps are positioned 0.24 eV (E1) and 1.06 eV (E2) below the conduction band edge, respectively. The capture cross sections of E1 and E2 are evaluated to be 1.65 × 10-17 cm2 and 1.76 × 10-14 cm2 and the corresponding trap densities are 1.07 × 1014 cm-3 and 2.19 × 1015 cm-3, respectively. The DLTS signal and concentration of the electronic deep levels are independent of the filling pulse width, and the depth toward the bottom of the sample, evidenced by the fact that they are correlated to noninteracting point defects. Furthermore, Photoluminescence (PL) measurement shows green luminescence, suggesting that unidentified point defects or complex, which affect the optical characterisitics, exhibit. Despite the Si-based materials, the freestanding GaN exhibits deep level characteristics comparable to those of conventional freestanding GaN, suggesting that it is a desirable material for use in the next generation optoelectronic devices with the large-scalibilityand low production costs.

Large area patterning of residue-free metal oxide nanostructures by liquid transfer imprint lithography.

One-dimensional (1D) and three-dimensional (3D) residue-free metal oxide patterns are directly fabricated over large areas using liquid transfer imprint lithography (LTIL) with an ultraviolet-curable metal oxide precursor resist. A 1D line or pillar array of metal oxides nano-patterns without a residual layer is formed by LTIL and annealing processes. A 3D layer-by-layer nanomesh structure is successfully constructed by repeating the LTIL method without a complex etching process. In addition, it is possible to form a hierarchical structure in which zinc oxide nanowires are selectively grown on a desired zinc oxide (ZnO) seed pattern formed by LTIL via a hydrothermal method. Unlike the pattern fabricated by the conventional nanoimprint lithography method, in the case of the pattern formed by LTIL the residues accumulated between the patterns during the patterning procedure can be removed, and thus it is possible to easily form various types of nanostructures.

Significant improvement of reverse leakage current characteristics of Si-based homoepitaxial InGaN/GaN blue light emitting diodes.

The nature of reverse leakage current characteristics in InGaN/GaN blue light emitting diodes (LEDs) on freestanding GaN crystals detached from a Si substrate is investigated for the first time, using temperature-dependent current-voltage (T-I-V) measurement. It is found that the Si-based homoepitaxial InGaN/GaN LEDs exhibit a significant suppression of the reverse leakage current without any additional processes. Their conduction mechanism can be divided into variable-range hopping and nearest neighbor hopping (NNH) around 360 K, which is enhanced by Poole-Frenkel emission. The analysis of T-I-V curves of the homoepitaxial LEDs yields an activation energy of carriers of 35 meV at -10 V, about 50% higher than that of the conventional ones (Ea = 21 meV at -10 V). This suggests that our homoepitaxial InGaN/GaN LEDs bears the high activation energy as well as low threading dislocation density (about 1 × 106/cm2), effectively suppressing the reverse leakage current. We expect that this study will shed a light on the high reliability and carrier tunneling characteristics of the homoepitaxial InGaN/GaN blue LEDs produced from a Si substrate and also envision a promising future for their successful adoption by LED community via cost-effective homoepitaxial fabrication of LEDs.