A review on gold nanoparticles as an innovative therapeutic cue in bone tissue engineering: Prospects and future clinical applications.

Bone damage is a complex orthopedic problem primarily caused by trauma, cancer, or bacterial infection of bone tissue. Clinical care management for bone damage remains a significant clinical challenge and there is a growing need for more advanced bone therapy options. Nanotechnology has been widely explored in the field of orthopedic therapy for the treatment of a severe bone disease. Among nanomaterials, gold nanoparticles (GNPs) along with other biomaterials are emerging as a new paradigm for treatment with excellent potential for bone tissue engineering and regenerative medicine applications. In recent years, a great deal of research has focused on demonstrating the potential for GNPs to provide for enhancement of osteogenesis, reduction of osteoclastogenesis/osteomyelitis, and treatment of bone cancer. This review details the latest understandings in regards to GNPs based therapeutic systems, mechanisms, and the applications of GNPs against various bone disorders. The present review aims to summarize i) the mechanisms of GNPs in bone tissue remodeling, ii) preparation methods of GNPs, and iii) functionalization of GNPs and its decoration on biomaterials as a delivery vehicle in a specific bone tissue engineering for future clinical application.

Development of a Temperature-Responsive Hydrogel Incorporating PVA into NIPAAm for Controllable Drug Release in Skin Regeneration.

Melanoma, a highly malignant and aggressive form of skin cancer, poses a significant global health threat, with limited treatment options and potential side effects. In this study, we developed a temperature-responsive hydrogel for skin regeneration with a controllable drug release. The hydrogel was fabricated using an interpenetrating polymer network (IPN) of N-isopropylacrylamide (NIPAAm) and poly(vinyl alcohol) (PVA). PVA was chosen for its adhesive properties, biocompatibility, and ability to address hydrophobicity issues associated with NIPAAm. The hydrogel was loaded with doxorubicin (DOX), an anticancer drug, for the treatment of melanoma. The NIPAAm-PVA (N-P) hydrogel demonstrated temperature-responsive behavior with a lower critical solution temperature (LCST) around 34 °C. The addition of PVA led to increased porosity and faster drug release. In vitro biocompatibility tests showed nontoxicity and supported cell proliferation. The N-P hydrogel exhibited effective anticancer effects on melanoma cells due to its rapid drug release behavior. This N-P hydrogel system shows great promise for controlled drug delivery and potential applications in skin regeneration and cancer treatment. Further research, including in vivo studies, will be essential to advance this hydrogel system toward clinical translation and impactful advancements in regenerative medicine and cancer therapeutics.

Development of a plasma-based 3D printing system for enhancing the biocompatibility of 3D scaffold.

Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology typically used in tissue engineering. However, 3D-printed row scaffolds manufactured using material extrusion techniques have low cell affinity on the surface and an insufficient biocompatible environment for desirable tissue regeneration. Thus, in this study, plasma treatment was used to render surface modification for enhancing the biocompatibility of 3D-printed scaffolds. We designed a plasma-based 3D printing system with dual heads comprising a plasma device and a regular 3D FDM printer head for a layer-by-layer nitrogen plasma treatment. Accordingly, the wettability, roughness, and protein adsorption capability of the 3D-printed scaffold significantly increased with the plasma treatment time. Hence, the layer-by-layer plasma-treated (LBLT) scaffold exhibited significantly enhanced cell adhesion and proliferation in anin vitroassay. Furthermore, the LBLT scaffold demonstrated a higher tissue infiltration and lower collagen encapsulation than those demonstrated by a non-plasma-treated scaffold in anin vivoassay. Our approach has great potential for various tissue-engineering applications via the adjustment of gas or precursor levels. In particular, this system can fabricate scaffolds capable of holding a biocompatible surface on an entire 3D-printed strut. Thus, our one-step 3D printing approach is a promising platform to overcome the limitations of current biocompatible 3D scaffold engineering.

The Effectiveness of Compartmentalized Bone Graft Sponges Made Using Complementary Bone Graft Materials and Succinylated Chitosan Hydrogels.

Bone defects can occur from many causes, including disease or trauma. Bone graft materials (BGMs) have been used to fill damaged areas for the reconstruction of diseased bone tissues since they are cost effective and readily available. However, BGMs quickly disperse around the tissue area, which ultimately leads to it migrating away from the defect after transplantation. We tested chitosan hydrogels as a useful carrier to hold BGMs in the transplantation area. In this study, we synthesized succinylated chitosan (SCS)-based hydrogels with a high decomposition rate and excellent biocompatibility. We confirmed that BGMs were well distributed inside the SCS hydrogel. The SCS-B hydrogel showed a decrease in mechanical properties, such as compressive strength and Young's modulus, as the succinylation rate increased. SCS-B hydrogels also exhibited a high cell growth rate and bone differentiation rate. Moreover, the in vivo results showed that the SCS hydrogel resorbed into the surrounding tissues while maintaining the BGMs in the transplantation area for up to 6 weeks. These data support the idea that SCS hydrogel can be useful as a bioactive drug carrier for a broad range of biomedical applications.

Facile Preparation of ß-Cyclodextrin-grafted Chitosan Electrospun Nanofibrous Scaffolds as a Hydrophobic Drug Delivery Vehicle for Tissue Engineering Applications.

Despite advances in the bio-tissue engineering area, the technical basis to directly load hydrophobic drugs on chitosan (CTS) electrospun nanofibers (ENs) has not yet been fully established. In this study, we fabricated CTS ENs by using an electrospinning (ELSP) system, followed by surface modification using succinyl-beta-cyclodextrin (ß-CD) under mild conditions. The ß-CD-modified CTS (ßCTS) ENs had slightly increased hydrophobicity compared to pristine CTS ENs as well as decreased residual amine content on the surface. Through FTIR spectroscopy and thermogravimetric analysis (TGA), we characterized the surface treatment physiochemically. In the drug release test, we demonstrated the stable and sustained release of a hydrophobic drug (e.g., dexamethasone) loaded on ß-CD ENs. During in vitro biocompatibility assessments, the grafting of ß-CD was shown to not reduce cell viability compared to pristine CTS ENs. Additionally, cells proliferated well on ß-CD ENs, and this was confirmed by F-actin fluorescence staining. Overall, the material and strategies developed in this study have the potential to load a wide array of hydrophobic drugs. This could be applied as a drug carrier for a broad range of tissue engineering applications.

Development of photo-crosslinkable platelet lysate-based hydrogels for 3D printing and tissue engineering.

Three-dimensional (3D) printing shows potential for use as an advanced technology for forming biomimetic tissue and other complex structures. However, there are limits and restrictions on selection of conventional bioinks. Here we report the first 3D-printable platelet lysate (PLMA)-based hydrogel, which consists of platelet lysate from whole blood of humans that can simulate the 3D structure of tissues and can be formed into a crosslinked hydrogel layer-by-layer to build cell-laden hydrogel constructs through methacrylated photo-polymerization. Furthermore, it can be customized for use with various tissues by controlling the physical properties according to irradiation time and concentration. In particular, different cells can be mixed and printed, and the integrity of the 3D printed structure can maintain its shape after crosslinking. The bio-ink exhibits excellent cell diffusion and proliferation at low concentrations, which improves moldability and biocompatibility. The 3D-printable PLMA bioinks may constitute a new strategy to create customized microenvironments for the repair of various tissuesin vivousing materials derived from the human body.

Accuracy of virtual 3-dimensional cephalometric images constructed with 2-dimensional cephalograms using the biplanar radiography principle.

PURPOSE: The purpose of this study was to evaluate the accuracy of virtual 3-dimensional (3D) cephalograms constructed using the principle of biplanar radiography by comparing them with cone-beam computed tomography(CBCT) images. MATERIALS AND METHODS: Thirty orthodontic patients were enrolled in this study. Frontal and lateral cephalograms were obtained with the use of a head posture aligner and reconstructed into 3D cephalograms using biplanar radiography software. Thirty-four measurements representing the height, width, depth, and oblique distance were computed in 3 dimensions, and compared with the measurements from the 3D images obtained by CBCT, using the paired t-test and Bland-Altman analysis. RESULTS: Comparison of height, width, depth, and oblique measurements showed no statistically significant differences between the measurements obtained from 3D cephalograms and those from CBCT images (P>0.05). Bland-Altman plots also showed high agreement between the 3D cephalograms and CBCT images. CONCLUSION: Accurate 3D cephalograms can be constructed using the principle of biplanar radiography if frontal and lateral cephalograms can be obtained with a head posture aligner. Three-dimensional cephalograms generated using biplanar radiography can replace CBCT images taken for diagnostic purposes.

Injectable Hydrogel Containing Tauroursodeoxycholic Acid for Anti-neuroinflammatory Therapy After Spinal Cord Injury in Rats.

We investigate the anti-inflammatory effects of injectable hydrogel containing tauroursodeoxycholic acid (TUDCA) in a spinal cord injury (SCI) model. To this end, TUDCA-hydrogel (TC gel) is created by immersing the synthesized hydrogel in a TUDCA solution for 1 h. A mechanical SCI was imposed on rats, after which we injected the TC gel. After the SCI and injections, motor functions and lesions were significantly improved in the TC gel group compared with those in the saline group. The TC gel significantly decreased pro-inflammatory cytokine levels compared with the saline; TUDCA and glycol chitosan-oxidized hyaluronate were mixed at a ratio of 9:1 (CHA) gel independently. In addition, the TC gel significantly suppressed the phosphorylation of extracellular signal-regulated kinase (p-ERK) and c-Jun N-terminal kinase (p-JNK) in the mitogen-activated protein kinase (MAPK) pathway compared with the saline, TUDCA, and CHA gel independently. It also decreased tumor necrosis factor-α (TNF-α) and glial fibrillary acidic protein (GFAP), inflammatory marker, at the injured sites more than those in the saline, TUDCA, and CHA gel groups. In conclusion, the results of this study demonstrate the neuroinflammatory inhibition effects of TC gel in SCI and suggest that TC gel can be an alternative drug system for SCI cases.

Emerging Potential of Exosomes in Regenerative Medicine for Temporomandibular Joint Osteoarthritis.

Exosomes are nanosized vesicles (30-140 nm) of endocytic origin that play important roles in regenerative medicine. They are derived from cell membranes during endocytic internalization and stabilize in biological fluids such as blood and synovia. Temporomandibular joint osteoarthritis (TMJ OA) is a degenerative disease, which, in addition to chronic pain, is characterized by progressive cartilage breakdown, condylar bone remodeling, and synovitis. However, traditional clinical treatments have limited symptom- and structure-modifying effects to restore damaged cartilage and other TMJ tissues. This is due to the limited self-healing capacity of condylar cartilage. Recently, stem-cell-derived exosomes have been studied as an alternative therapeutic approach to tissue repair and regeneration. It is known that trophic regulation of mesenchymal stem cells (MSCs) has anti-inflammatory and immunomodulatory effects under pathological conditions, and research on MSC-derived exosomes is rapidly accumulating. MSC-derived exosomes mimic the major therapeutic effects of MSCs. They affect the activity of immune effector cells and possess multilineage differentiation potential, including chondrogenic and osteogenic differentiation. Furthermore, exosomes are capable of regenerating cartilage or osseous compartments and restoring injured tissues and can treat dysfunction and pain caused by TMJ OA. In this review, we looked at the uniqueness of TMJ, the pathogenesis of TMJ OA, and the potential role of MSC-derived exosomes for TMJ cartilage and bone regeneration.

Dual pH- and GSH-Responsive Degradable PEGylated Graphene Quantum Dot-Based Nanoparticles for Enhanced HER2-Positive Breast Cancer Therapy.

Dual stimuli-responsive degradable carbon-based nanoparticles (DS-CNPs) conjugated with Herceptin (HER) and polyethylene glycol (PEG) have been designed for the treatment of HER2-positive breast cancer. Each component has been linked through disulfide linkages that are sensitive to glutathione in a cancer microenvironment. ß-cyclodextrin (ß-CD) on the surface of DS-CNPs formed an inclusion complex (DL-CNPs) with doxorubicin (DOX) at a high loading capacity of 5.3 ± 0.4%. In response to a high level of glutathione (GSH) and low pH in a tumor environment, DL-CNPs were rapidly degraded and released DOX in a controlled manner via disruption of host-guest inclusion. These novel DL-CNPs exhibited high cellular uptake with low toxicity, which induced the efficient inhibition of antitumor activity both in vitro and in vivo. Cell viability, confocal laser scanning microscopy, and animal studies indicate that DL-CNPs are a great platform with a synergistically enhanced antitumor effect from the dual delivery of HER and DOX in DL-CNPs.

Ameloblastoma with dystrophic calcification: A case report with 3-dimensional cone-beam computed tomographic images of calcification.

This report presents a rare case of ameloblastoma with histopathologic and radiographic calcification, including 3-dimensional cone-beam computed tomographic (CBCT) images. A 22-year-old woman had hard swelling on the right mandible. Panoramic and CBCT images showed multilocular radiolucencies with internal calcification foci in the right mandible. Three-dimensional images clearly showed varying-sized radiopacities within the lesion from various angles. A histopathologic examination showed central squamous differentiation and more densely packed peripheral palisading ameloblastic cells. Many areas of keratin pearls and calcifications were also seen. Four previous reports have described 5 cases of ameloblastoma showing histopathologic calcification. This might be the first report to present the calcification of ameloblastoma on panoramic and CBCT images, especially on 3-dimensional images.

Vitamin D-conjugated gold nanoparticles as functional carriers to enhancing osteogenic differentiation.

In an aging society, bone disorders such as osteopenia, osteoporosis, and degenerative arthritis cause serious public health problems. In order to solve these problems, researchers continue to develop therapeutic agents, increase the efficacy of developed therapeutic agents, and reduce side effects. Gold nanoparticles (GNPs) are widely used in tissue engineering applications as biosensors, drug delivery carriers, and bioactive materials. Their special surface property enables easy conjugation with ligands including functional groups such as thiols, phosphines, and amines. This creates an attractive advantage to GNPs for use in the bone tissue engineering field. However, GNPs alone are limited in their biological effects. In this study, we used thiol-PEG-vitamin D (SPVD) to conjugate vitamin D, an essential nutrient critical for maintaining normal skeletal homeostasis, to GNPs. To characterize vitamin D-conjugated GNPs (VGNPs), field emission transmission electron microscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, and ultraviolet/visible absorption analysis were carried out. The developed VGNPs were well bound through the thiol groups between GNPs and vitamin D, and were fabricated in size of 60 nm. Moreover, to demonstrate VGNPs osteogenic differentiation effect, various assays were carried out through cell viability test, alkaline phosphatase assay, calcium deposition assay, real-time polymerase chain reaction, and immunofluorescence staining. As a result, the fabricated VGNPs were found to effectively enhance osteogenic differentiation of human adipose-derived stem cells (hADSCs) in vitro. Based on these results, VGNPs can be utilized as functional nanomaterials for bone regeneration in the tissue engineering field.

Primordial odontogenic tumor: a case report and literature review.

BACKGROUND: A primordial odontogenic tumor (POT) is a rare, benign, mixed epithelial and mesenchymal odontogenic tumor that has been included as a new entity in the latest World Health Organization (WHO) classification (2017). POT consists of dental papilla-like myxoid connective tissue covered with a delicate membrane of ameloblastic epithelium. Only 15 cases have been documented worldwide, and here, we report the sixteenth case and the first one of South Korea. CASE PRESENTATION: An asymptomatic lesion was discovered as an incidental radiographic finding in a 10-year-old boy. The patient had no complaints about the lesion. Cone-beam computerized tomograms revealed a round cavity with a defined cortical border measuring approximately 5 × 5 × 5 mm in size. The lesion was a POT. The patient was treated with enucleation. The tumor showed no recurrence for one year. CONCLUSION: This is the first report of POT in South Korea using the novel diagnosis of POT after it was recognized and defined in the latest WHO classification. This novel diagnosis will be useful for pathologists and clinicians in diagnosing and differentiating this new and rare disease from other odontogenic tumors.

Unexpected radiopaque foreign bodies encountered in dental practice.

OBJECTIVES: The purpose of the present study was to determine the presence of radiopaque foreign bodies on oral and maxillofacial radiographs and classify them. METHOD AND MATERIALS: The Study Comment section of the Picture Archiving and Communication System of Chonnam National University Dental Hospital was searched using 30 key words to identify images with radiopaque foreign bodies recorded between November 2008 and March 2017. A total of 503 cases of radiopaque foreign bodies were selected from among the recovered images. The radiopaque foreign bodies were sorted into 19 types, which were subsequently divided into two categories according to whether the foreign bodies were inserted intentionally or unintentionally. The two categories were subdivided into five groups based on the cause of insertion: Treatment, Esthetics, Cultural, Iatrogenesis, and Accident. RESULTS: In this study, the proportions of foreign bodies inserted intentionally (48%) and unintentionally (52%) were similar. When the foreign bodies were grouped based on the cause of insertion, the following frequencies were observed: Treatment, 41%; Esthetics, 7%; Cultural, <1%; Iatrogenesis, 51%; and Accident, 1%. CONCLUSION: For adequate case management and to avoid unnecessary embarrassment and misinterpretation of unexpected radiopacities, clinicians should be familiar with the various types of foreign bodies and should ensure that detailed patient medical/dental history is obtained.

Benefits of lateral cephalogram during landmark identification on posteroanterior cephalograms.

OBJECTIVE: Precise identification of landmarks on posteroanterior (PA) cephalograms is necessary when evaluating lateral problems such as facial asymmetry. The aim of the present study was to investigate whether the use of lateral (LA) cephalograms can reduce errors in landmark identification on PA cephalograms. METHODS: Five examiners identified 16 landmarks (Cg, N, ANS, GT, Me, RO, Lo, FM, Z, Or, Zyg, Cd, NC, Ms, M, and Ag) on 32 PA cephalograms with and without LA cephalograms at the same time. The positions of the landmarks were recorded and saved in the horizontal and vertical direction. The mean errors and standard deviation of landmarks location according to the use of LA cephalograms were compared for each landmark. RESULTS: Relatively small errors were found for ANS, Me, Ms, and Ag, while relatively large errors were found for N, GT, Z, Or, and Cd. No significant difference was found between the horizontal and vertical errors for Z and Or, while large vertical errors were found for N, GT, and Cd. The value of identification error was lower when the landmarks were identified using LA cephalograms. Statistically significant error reductions were found at N and Cd with LA cephalograms, especially in the vertical direction. CONCLUSIONS: The use of LA cephalograms during identification of landmarks on PA cephalograms could help reduce identification errors.

Osteoporosis detection in panoramic radiographs using a deep convolutional neural network-based computer-assisted diagnosis system: a preliminary study.

OBJECTIVES: To evaluate the diagnostic performance of a deep convolutional neural network (DCNN)-based computer-assisted diagnosis (CAD) system in the detection of osteoporosis on panoramic radiographs, through a comparison with diagnoses made by oral and maxillofacial radiologists. METHODS: Oral and maxillofacial radiologists with >10 years of experience reviewed the panoramic radiographs of 1268 females {mean [± standard deviation (SD)] age: 52.5 ± 22.3 years} and made a diagnosis of osteoporosis when cortical erosion of the mandibular inferior cortex was observed. Among the females, 635 had no osteoporosis [mean (± SD) age: 32.8 ± SD 12.1 years] and 633 had osteoporosis (72.2 ± 8.5 years). All panoramic radiographs were analysed using three CAD systems, single-column DCNN (SC-DCNN), single-column with data augmentation DCNN (SC-DCNN Augment) and multicolumn DCNN (MC-DCNN). Among the radiographs, 200 panoramic radiographs [mean (± SD) patient age: 63.9 ± 10.7 years] were used for testing the performance of the DCNN in detecting osteoporosis in this study. The diagnostic performance of the DCNN-based CAD system was assessed by receiver operating characteristic (ROC) analysis. RESULTS: The area under the curve (AUC) values obtained using SC-DCNN, SC-DCNN (Augment) and MC-DCNN were 0.9763, 0.9991 and 0.9987, respectively. CONCLUSIONS: The DCNN-based CAD system showed high agreement with experienced oral and maxillofacial radiologists in detecting osteoporosis. A DCNN-based CAD system could provide information to dentists for the early detection of osteoporosis, and asymptomatic patients with osteoporosis can then be referred to the appropriate medical professionals.

Injectable hydrogel composite containing modified gold nanoparticles: implication in bone tissue regeneration.

BACKGROUND: For effective bone regeneration, it is necessary to implant a biocompatible scaffold that is capable of inducing cell growth and continuous osteogenic stimulation at the defected site. Here, we suggest an injectable hydrogel system using enzymatic cross-linkable gelatin (Gel) and functionalized gold nanoparticles (GNPs). METHODS: In this work, tyramine (Ty) was synthesized on the gelatin backbone (Gel-Ty) to enable a phenol crosslinking reaction with horseradish peroxidase (HRP). N-acetyl cysteine (NAC) was attached to the GNPs surface (G-NAC) for promoting osteodifferentiation. RESULTS: The Gel-Ty hydrogels containing G-NAC (Gel-Ty/G-NAC) had suitable mechanical strength and biocompatibility to embed and support the growth of human adipose derived stem cells (hASCs) during a proliferation test for three days. In addition, G-NAC promoted osteodifferentiation both when it was included in Gel-Ty and when it was used directly in hASCs. The osteogenic effects were demonstrated by the alkaline phosphatase (ALP) activity test. CONCLUSION: These findings indicate that the phenol crosslinking reaction is suitable for injectable hydrogels for tissue regeneration and G-NAC stimulate bone regeneration. Based on our results, we suggest that Gel-Ty/G-NAC hydrogels can serve both as a biodegradable graft material for bone defect treatment and as a good template for tissue engineering applications such as drug delivery, cell delivery, and various tissue regeneration uses.

Accuracy of three-dimensional cephalograms generated using a biplanar imaging system.

OBJECTIVE: Biplanar imaging systems allow for simultaneous acquisition of lateral and frontal cephalograms. The purpose of this study was to compare measurements recorded on three-dimensional (3D) cephalograms constructed from two-dimensional conventional radiographs and biplanar radiographs generated using a new biplanar imaging system with those recorded on cone-beam computed tomography (CBCT)-generated cephalograms in order to evaluate the accuracy of the 3D cephalograms generated using the biplanar imaging system. METHODS: Three sets of lateral and frontal radiographs of 15 human dry skulls with prominent facial asymmetry were obtained using conventional radiography, the biplanar imaging system, and CBCT. To minimize errors in the construction of 3D cephalograms, fiducial markers were attached to anatomical landmarks prior to the acquisition of radiographs. Using the 3D Ceph™ program, 3D cephalograms were constructed from the images obtained using the biplanar imaging system (3D cephbiplanar), conventional radiography (3D cephconv), and CBCT (3D cephcbct). A total of 34 measurements were obtained compared among the three image sets using paired t-tests and Bland-Altman plotting. RESULTS: There were no statistically significant differences between the 3D cephbiplanar and 3D cephcbct measurements. In addition, with the exception of one measurement, there were no significant differences between the 3D cephcbct and 3D cephconv measurements. However, the values obtained from 3D cephconv showed larger deviations than those obtained from 3D cephbiplanar. CONCLUSIONS: The results of this study suggest that the new biplanar imaging system enables the construction of accurate 3D cephalograms and could be a useful alternative to conventional radiography.

Radiographic features of lingual mandibular bone depression using dental cone beam computed tomography.

OBJECTIVES: To describe accurately the radiographic characteristics of lingual mandibular bone depression (LMBD) using CBCT images. METHODS: This study included 30 cases of LMBD with CBCT images from 29 patients. Age, sex, location, shape, size, and the relationships of the LMBDs to adjacent anatomical structures such as the mandibular inferior cortex and mandibular canal were recorded. The correlation between age and size was evaluated using Pearson's correlation coefficient. RESULTS: The average age of the patients was 57 years. LMBDs occurred primarily in males (93%), occurrence in the right (n = 14) and left (n = 16) mandibles was approximately equal. The shapes were ovoid, round, peanut, triangular, or rectangular on panoramic radiographs. The occurrences in the molar, distal to the molar, and ramus regions were 63.3, 33.3, and 3.3% respectively. The mean size on CBCT was 15.4 mm in length, 11.2 mm in height, and 6.4 mm in depth. The relationship to the mandibular canal was categorized as separated (48.2%), contacted (31%), or go-through (20.7%). The relationship to the mandibular inferior cortex was classified as separated (20.7%), contacted (27.6%), or resorbed (51.7%). The Pearson's correlation coefficient showed a positive correlation between age and depth (r = 0.38; p = 0.038). CONCLUSIONS: The typical features of a LMBD were ovoid, round or mutilobated radiolucent shape, well-defined sclerotic border, and position in the posterior area of the mandible between the mandibular canal and inferior mandibular cortex. The buccolingual depth of LMBD was deeper with increasing age.

Diagnostic accuracy and reliability of panoramic temporomandibular joint (TMJ) radiography to detect bony lesions in patients with TMJ osteoarthritis.

BACKGROUND/PURPOSE: The value of the temporomandibular joint (TMJ) projections of panoramic radiography for diagnosing TMJ osteoarthritis is not completely elucidated. This study aimed to assess the diagnostic accuracy and reliability of panoramic TMJ radiography to detect bony lesions in patients with TMJ osteoarthritis. MATERIALS AND METHODS: This study included 55 TMJs of 44 subjects who were diagnosed with TMJ osteoarthritis. They underwent panoramic radiography (PanRad), lateral (LatTMJ) and frontal (FrnTMJ) projection panoramic TMJ radiography, and cone-beam computed tomography (CBCT). All images were examined by two observers for flattening, erosion, and osteophytes on the condylar head and articular eminence of the TMJ. RESULTS: For detecting flattening lesions on the mandibular condyle, the sensitivities of PanRad, LatTMJ, and FrnTMJ were less than 67% and the combination of LatTMJ and FrnTMJ (ComTMJ) had the highest sensitivity for both observers (67.6% and 79.7%, respectively). For erosion lesions, the sensitivity of ComTMJ for observer 1 was the highest, at 84.3%, whereas the specificity of ComTMJ was the lowest, at 37.5%. The sensitivities of all four methods for observer 2 were less than 54% and the specificities ranged from 75.0% to 100%. The overall diagnostic accuracy was highest for ComTMJ (64.3%), followed by LatTMJ (59.5%). The intraobserver reliability was good for one observer and excellent for the other, and the interobserver reliability was fair or moderate. CONCLUSION: Panoramic TMJ radiography demonstrated limited diagnostic accuracy and acceptable reliability in detecting bony lesions of the TMJ, although it was better than conventional panoramic radiography.