Improvement in Photoelectrochemical Water Splitting Performance of GaN-nanowire Photoanode Using MXene.

The photoelectrochemical water splitting (PEC-WS) performance of a photoanode consisting of GaN nanowires (NWs) is significantly improved using a Ti3C2-MXene coating as an intermediate layer to promote carrier transfer toward the electrolyte. The maximum current density and applied-bias photon-to-current efficiency of the photoanode comprising GaN NWs coated with Ti3C2-MXene (MGNWs) are measured to be 34.24 mA/cm2 and 14.47% at 1.2 and 0.4 V versus a reversible hydrogen electrode (RHE), respectively. These values are much higher than those of the GaN-NW photoanode without Ti3C2-MXene (4.04 mA/cm2 and 1.95%) and also markedly exceed those of previously reported photoanodes. After 8 days of PEC-WS, the current density was measured to be 31.07 mA/cm2, which corresponds to 97.58% of that measured immediately after the reaction started. Based on the time dependence of the current density, the hydrogen evolution rate over the reaction time is calculated to be 0.58 mmol/cm2·h. The results confirm that the PEC-WS performance of the optimized MGNW photoanode is superior to and more stable than those of previously reported photoanodes.

A Validated Chiral LC-MS/MS Method for the Enantioselective Determination of (S)-(+)- and (R)-(-)-Ibuprofen in Dog Plasma: Its Application to a Pharmacokinetic Study.

The purpose of this study was to develop a method for simultaneously separating ibuprofen enantiomers using electrospray ionization (ESI) liquid chromatography with tandem mass spectrometry (LC-MS/MS). LC-MS/MS was operated with negative ionization and multiple reaction monitoring modes; transitions were monitored at m/z of 205.1 > 160.9 for ibuprofen enantiomers, 208.1 > 163.9 for (S)-(+)-ibuprofen-d3 [internal standard 1 (IS1)], and 253.1 > 208.9 for (S)-(+)-ketoprofen (IS2), respectively. In a one-step liquid-liquid extraction, 10 µL plasma was extracted with ethyl acetate:methyl tertiary-butyl ether of 7:3. Enantiomer chromatographic separation was carried out with an isocratic mobile phase consisting of 0.008% formic acid in water-methanol (v/v) at a flow rate of 0.4 mL/min on a CHIRALCEL® OJ-3R column (150 × 4.6 mm, 3 µm). This method was fully validated for each enantiomer and results were in compliance with the regulatory guidelines of the U.S. Food and Drug Administration and the Korea Ministry of Food and Drug Safety. The validated assay was executed for nonclinical pharmacokinetic studies after oral and intravenous administration of racemic ibuprofen and dexibuprofen in beagle dogs.

Bioinspired pursuit with a swimming robot using feedback control of an internal rotor.

Theoretical guarantees of capture become complicated in the case of a swimming fish or fish robot because of the oscillatory nature of the fish heading. Building on the connection between a swimming fish and the canonical Chaplygin sleigh, a novel state feedback control law is shown to result in closed-loop dynamics that exhibit a limit cycle resulting in steady forward-swimming motion in a desired heading. Analysis of this limit cycle reveals boundaries on the size of the oscillations around the desired heading, which are then used to specify under what conditions (e.g. prey speed, predator speed, control gains) capture is guaranteed. By changing the desired swimming direction in response to prey movements, the control law is shown to be capable of pure pursuit, deviated pure pursuit, intercept, and parallel navigation in simulation. An experimental demonstration of pure pursuit by a flexible fish-inspired robot actuated with an internal reaction wheel is described.

Difference in Cognitive Function by First Onset Age of Alcohol Induced Blackout and Its Duration.

OBJECTIVE: Alcohol-induced blackout (blackout) is a typical early symptom of cognitive impairment caused by drinking. However, the first onset age of blackout or the duration after onset of blackout has not been directly compared in previous studies. The purpose of this study was to investigate the differences in cognitive function to the first start age of blackouts and their duration. METHODS: Thirty-one male subjects were included in this study. Their age at the first blackout and the duration after the onset of blackout were investigated. Neuropsychological tests were conducted to determine their attention, memory, and executive function. Subjects were divided into three groups according to their age of the first onset blackout (group O1, < 20 years; group O2, 21-39 years; and group O3, > 40 years). Subjects were also divided into three groups by duration after the onset of blackout (P1, < 10 years; P2, 10-29 years; and P3, > 30 years). We then examined differences in neurocognitive function among these groups. RESULTS: O1 tended to have a lower memory score than O2 (F = 3.28, p = 0.053). Significant differences were observed in attention and executive function between groups P1 and P3 (Digit Span_backward: F = 6.07, p < 0.05; visual span_forward: F = 4.19, p < 0.05; executive intelligence quotient: F = 3.55, p < 0.05). CONCLUSION: Greater memory impairment was detected in subjects having an earlier age of the first blackout. The longer the duration after the onset of blackout, the more impaired their attention and executive function skills.

Differential impact of intimal tear location on aortic dilation and reintervention in acute type I aortic dissection after total arch replacement.

OBJECTIVE: The study objective was to evaluate the differential impact of intimal tear location on aortic dilation and reintervention after total arch replacement for acute type I aortic dissection. METHODS: From 2009 to 2016, 85 patients underwent total arch replacement for acute type I aortic dissection with residual dissected thoracoabdominal aorta. Forty patients (47%) underwent serial computed tomography scans that were sufficient for analysis. Among these, 14 (35%) underwent total arch replacement via the frozen elephant trunk procedure. Intimal tears were analyzed (size and number) at 3 different levels (level 1, proximal descending thoracic aorta; level 2, distal descending thoracic aorta; level 3, abdominal aorta). Aortic diameter was measured at 4 levels (pulmonary artery bifurcation, celiac axis, maximal abdominal aorta, and maximal thoracoabdominal aorta) using serial follow-up computed tomography scans. The linear mixed model for a repeated-measures random intercept and slope model was used. The rate of freedom from reintervention was analyzed. RESULTS: In the unadjusted analysis, initial diameter of pulmonary artery bifurcation level, number of intimal tears, presence of 3- or 5-mm intimal tears, and frozen elephant trunk were not significant factors for aortic dilation or shrinking. The significant factors for aortic dilation were intimal tear location and number of visceral branches from the false lumen. The 3-year freedom from reintervention rate was significantly higher in patients with intimal tears 3 mm or greater at level 3 than in those with tears at level 1 (94.1% vs 37.5%, log-rank, P < .001). CONCLUSIONS: Intimal tear in the proximal descending thoracic aorta is the most important factor for aortic dilation and reintervention in acute type I aortic dissection after total arch replacement.

Locational impact of luminal communication on aortic diameter changes and reintervention in acute type I aortic dissection.

OBJECTIVES: The aim of this study is to evaluate the locational impact of a luminal communication on aortic diameter changes and reintervention after surgical repair of acute type I aortic dissection. METHODS: Between 2009 and 2017, 304 patients underwent operation for acute type I aortic dissection. Among them, 93 patients were enrolled. The luminal communications were analysed in segment 1 (the proximal descending thoracic aorta), segment 2 (the distal descending thoracic aorta) and segment 3 (the abdominal aorta). The aortic diameter was measured at the pulmonary artery bifurcation, coeliac axis, maximal abdominal aorta and maximal thoraco-abdominal aorta using serial follow-up computed tomography scans. The linear mixed model was used, and the rate of freedom from reintervention was analysed. RESULTS: In the adjusted analysis, the initial diameter of the maximal abdominal aorta and the first luminal communication in segment 1 was statistically significant. However, the slope value of the maximal abdominal aorta was smaller than that of the first luminal communication in segment 1 (0.024 vs 0.198). The 3-year freedom from reintervention rate was significantly higher in patients without a luminal communication than in those with an initial luminal communication in segment 1 (96% vs 47%, log rank, P = 0.003). CONCLUSIONS: A luminal communication at the proximal descending thoracic aorta (segment 1) is a significant factor for an increasing aortic diameter and reintervention after surgical repair of acute type I aortic dissection.

Laser direct structuring and electroless plating applicable super-engineering plastic PPS based thermal conductive composite with particle surface modification.

Boron nitride (BN) and laser activate particles (LAPs) were surface-modified via base treatment and by using a silane coupling agent in order to confer functionality and enhance the interfacial affinity of these particles for a polymer matrix. The introduction of LAP and BN caused severe deterioration of the mechanical properties of the filler-polymer composite by acting as defects and due to the poor interface with polyphenylene sulfide (PPS), used as the polymeric matrix. As expected, the thermal and mechanical properties were enhanced via surface modification, whereas the tensile strength of the composites with the surface-modified fillers remained lower than that of neat PPS. The BN/LAP binary filler system showed little influence on the mechanical properties of the composite. However, the incorporation of a small amount of LAP into the BN composite produced a slight improvement of the thermal conductivity when the total filler content was maintained. Moreover, LAP leads the metal plating at the laser irradiated surface. Thus, the BN/LAP/PPS composite was used to fabricate a circuit board via laser direct structuring (LDS) and electroless plating for potential light emitting diode (LED) application.

Spicy Food Preference and Risk for Alcohol Dependence in Korean.

OBJECTIVE: Previous studies have reported that both preference for spicy food and drinking behavior are associated with the activity of the opioid system in the central nervous system. The relationship between the preference for spicy food and the risk of alcohol dependence by comparing spicy food preference in alcohol-dependent patients vs. healthy controls was investigated. Also the association between the preference for spicy food and OPRM1 A118G was studied. METHODS: A total of 150 Korean male patients with alcohol dependence and 100 normal male control subjects were included in this study. Preference for spicy food was measured using the Food Preference Scale (FPS). DNA analysis was conducted to detect the A118G polymorphism. RESULTS: The mean FPS score was significantly higher in the alcohol-dependent patients (61.2±24.2) than in the normal control subjects (53.0±22.0). FPS scores differed significantly between alcohol-dependent patients and normal control subjects who had the G allele in OPRM1 A118G, but not between the two groups with the AA genotype. CONCLUSION: A strong preference for spicy food can be assumed to be a risk factor for alcohol dependence, particularly in those carrying the G allele in OPRM1 A118G.

Prediction-Based Energy Saving Mechanism in 3GPP NB-IoT Networks.

The current expansion of the Internet of things (IoT) demands improved communication platforms that support a wide area with low energy consumption. The 3rd Generation Partnership Project introduced narrowband IoT (NB-IoT) as IoT communication solutions. NB-IoT devices should be available for over 10 years without requiring a battery replacement. Thus, a low energy consumption is essential for the successful deployment of this technology. Given that a high amount of energy is consumed for radio transmission by the power amplifier, reducing the uplink transmission time is key to ensure a long lifespan of an IoT device. In this paper, we propose a prediction-based energy saving mechanism (PBESM) that is focused on enhanced uplink transmission. The mechanism consists of two parts: first, the network architecture that predicts the uplink packet occurrence through a deep packet inspection; second, an algorithm that predicts the processing delay and pre-assigns radio resources to enhance the scheduling request procedure. In this way, our mechanism reduces the number of random accesses and the energy consumed by radio transmission. Simulation results showed that the energy consumption using the proposed PBESM is reduced by up to 34% in comparison with that in the conventional NB-IoT method.

Effect of Feeding High Gamma-Aminobutyric Acid-Containing Giant Embryo Black Sticky Rice (Oryza sativa L.) on Anxiety-Related Behavior of C57BL/6 Mice.

The aim of this study was to determine the effect of feeding high gamma-aminobutyric acid (GABA)-containing black sticky rice giant embryo (BSRGE, Oryza sativa L.) on anxiety-related behavior of C57BL/6 mice. Experimental feedstuff (BSRGE with high GABA+AIN-76A) and control (AIN-76A) were provided to C57BL/6 mouse for 10 days. Antianxiety effects of BSRGE with high GABA were measured using an elevated plus maze. On day 8, the number of open arm entries by GABA and control groups were 1.10 ± 1.60 (mean ± SD) and 0.00 ± 0.00 (P = .030). On day 10, the number of open arm entries by the GABA group was 2.00 ± 1.89, which was significantly (P = .025) higher than that in the control group (0.40 ± 0.84). On day 8, the time the mice spent in open arm in the GABA group and control group was 3.60 ± 7.06 and 0.00 ± 0.00 sec (P = .068), respectively. On day 10, the time the mice in the GABA and control groups spent in open arm was 6.20 ± 5.35 sec and 1.80 ± 3.82 sec (P = .042), respectively. In repeated analysis of variance for the number of entries into open arm and time spent in open arm, significant differences were found between the two groups. Therefore, BSRGE with high GABA content might have an antianxiety effect. This study can serve as a preliminary study so that further antianxiety effects of BSRGE can be determined in more extended animal or clinical research studies in the future.

Calcium/calmodulin-dependent protein kinase IV gene polymorphisms in Korean alcohol-dependent patients.

INTRODUCTION: A relationship between alcohol dependence (AD) and calcium/calmodulin-dependent protein kinase IV (CAMKIV) has been reported in a whole genome study of Korean AD patients. The purpose of the present study is to compare the frequency of CAMKIV genotypes and alleles between AD and control subjects in Korea. METHODS: The present study includes 281 AD patients and 139 control subjects. Seven single nucleotide polymorphism of CAMKIV gene known to show significant separation ratio in Asians were searched in SNP database and previous studies related to CAMKIV gene. Polymerase chain reaction and restriction fragment length polymorphism techniques were used to analyze genotype of CAMKIV gene SNPs. RESULTS: Major TT genotype and T allele frequencies of rs 25917 in AD patients were significantly higher than those of control subjects (genotype frequency, p=0.002; allele frequency, p=0.001). Major CC genotype and C allele frequencies of rs 117590959 in AD patients were also significantly higher than those of control subjects (genotype frequency, p<0.001; allele frequency, p=0.001). Major genotypes of rs25917 (p=0.002, odd ratio: 3.13, 95% CI: 1.54-6.38) and rs11790959 (p=0.002, odd ratio: 3.22, 95% CI: 1.52-6.81) showed significantly higher odds ratios associated with AD than minor genotypes in logistic regression. DISCUSSION: These results suggest that CAMKIV might be a candidate AD gene. Further research is needed to determine the precise relationship between CAMKIV and AD and the function of each SNP.

Printable and Rewritable Full Block Copolymer Structural Color.

Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display.

Flexible Nonvolatile Transistor Memory with Solution-Processed Transition Metal Dichalcogenides.

Nonvolatile field-effect transistor (FET) memories containing transition metal dichalcogenide (TMD) nanosheets have been recently developed with great interest by utilizing some of the intriguing photoelectronic properties of TMDs. The TMD nanosheets are, however, employed as semiconducting channels in most of the memories, and only a few works address their function as floating gates. Here, a floating-gate organic-FET memory with an all-in-one floating-gate/tunneling layer of the solution-processed TMD nanosheets is demonstrated. Molybdenum disulfide (MoS2 ) is efficiently liquid-exfoliated by amine-terminated polystyrene with a controlled amount of MoS2 nanosheets in an all-in-one floating-gate/tunneling layer, allowing for systematic investigation of concentration-dependent charge-trapping and detrapping properties of MoS2 nanosheets. At an optimized condition, the nonvolatile memory exhibits memory performances with an ON/OFF ratio greater than 104 , a program/erase endurance cycle over 400 times, and data retention longer than 7 × 103 s. All-in-one floating-gate/tunneling layers containing molybdenum diselenide and tungsten disulfide are also developed. Furthermore, a mechanically-flexible TMD memory on a plastic substrate shows a performance comparable with that on a hard substrate, and the memory properties are rarely altered after outer-bending events over 500 times at the bending radius of 4.0 mm.

Usefulness of Plaque Magnetic Resonance Imaging in Identifying High-Risk Carotid Plaques Irrespective of the Degree of Stenosis.

OBJECTIVE: Measurement of the degree of stenosis is not enough to decide on the treatment strategy for patients with carotid stenosis. Plaque morphology examination is needed for such a decision-making. Thus, we evaluated the usefulness of plaque magnetic resonance imaging (MRI) to decide on the modality of treatment for patients with carotid atherosclerotic plaques. MATERIALS AND METHODS: Fifteen patients presenting with carotid stenosis between 2014 and 2016 were included. They underwent angiography for measurement of the degree of stenosis. Carotid plaques were visualized using MRI. RESULTS: There were six (40%) stable and nine (60%) unstable plaques. Seven symptomatic patients (77.7%) had unstable lesions and two symptomatic patients (33.3%) had stable lesions (p = 0.096). There were six (40%) intraplaque hemorrhage (IPH) cases. There were six symptomatic patients (100%) in the IPH group and three symptomatic patients (33.3%) in the non-IPH group (p = 0.013). The mean stenosis degree was 58.9% in the IPH group and 70.4% in the non-IPH group (p = 0.094). Symptoms occurred irrespective of the degree of the stenosis in the IPH groups. In the IPH group, the recurrent ischemic cerebrovascular event rate was 33.3%. Particularly, the recurrent ischemic cerebrovascular event rate was 66.7% in the IPH group with mild stenosis treated with medications. CONCLUSION: IPH in plaque MRI is significantly associated with ischemic symptoms and has a high risk for subsequent ischemic cerebrovascular events irrespective of the degree of stenosis. Plaque MRI is a useful tool in predicting symptomatic risks for carotid stenosis irrespective of the degree of such stenosis.

Solvent-Assisted Gel Printing for Micropatterning Thin Organic-Inorganic Hybrid Perovskite Films.

While tremendous efforts have been made for developing thin perovskite films suitable for a variety of potential photoelectric applications such as solar cells, field-effect transistors, and photodetectors, only a few works focus on the micropatterning of a perovskite film which is one of the most critical issues for large area and uniform microarrays of perovskite-based devices. Here we demonstrate a simple but robust method of micropatterning a thin perovskite film with controlled crystalline structure which guarantees to preserve its intrinsic photoelectric properties. A variety of micropatterns of a perovskite film are fabricated by either microimprinting or transfer-printing a thin spin-coated precursor film in soft-gel state with a topographically prepatterned elastomeric poly(dimethylsiloxane) (PDMS) mold, followed by thermal treatment for complete conversion of the precursor film to a perovskite one. The key materials development of our solvent-assisted gel printing is to prepare a thin precursor film with a high-boiling temperature solvent, dimethyl sulfoxide. The residual solvent in the precursor gel film makes the film moldable upon microprinting with a patterned PDMS mold, leading to various perovskite micropatterns in resolution of a few micrometers over a large area. Our nondestructive micropatterning process does not harm the intrinsic photoelectric properties of a perovskite film, which allows for realizing arrays of parallel-type photodetectors containing micropatterns of a perovskite film with reliable photoconduction performance. The facile transfer of a micropatterned soft-gel precursor film on other substrates including mechanically flexible plastics can further broaden its applications to flexible photoelectric systems.

Boron Nitride Nanosheets (BNNSs) Chemically Modified by "Grafting-From" Polymerization of Poly(caprolactone) for Thermally Conductive Polymer Composites.

To meet the growing demand for rapid heat dissipation in electronic devices to ensure their reliable performance with a high level of safety, many polymer composites with thermally conductive but electrically insulating 2D boron nitride nanosheets (BNNSs) are being developed. Here we present an efficient way to enhance the thermal conductivity (TC) of a polymer composite by means of "grafting-from" polymerization of a poly(caprolactone) (PCL) onto BNNSs. The BNNSs, which were exfoliated from bulk BN by means of ultra-sonication, were prepared by means of radical oxidation. These oxidized BNNSs (oxi-BNNSs) were employed as initiators for subsequent ring-opening polymerization of PCL, which successfully resulted in PCL chemically grafted onto BNNSs (PCL-g-BNNSs). The excellent dispersion of PCL-g-BNNSs in common solvents allowed us to readily fabricate a polymer composite that contained PCL-g-BNNSs embedded in a PCL matrix, and the composite showed TC values that were five and nine times greater in the out-of-plane and in-plane mode, respectively, than those of pristine PCL.

Controlled Nanopores in Thin Films of Nonstoichiometrically Supramolecularly Assembled Graft Copolymers.

Herein, nanometer-scale morphologies of graft-copolymer-like supramolecular thin films, composed of sulfonic acid terminated polystyrene (SPS) and poly(2-vinylpyridine) (P2VP), and their application to antireflection coatings were investigated. The intermolecular complexes of SPS and P2VP, formed through nonstoichiometric multiple hydrogen bonding between the sulfonic acid group of SPS and the nitrogen atom in pyridine unit of P2VP, occurring in film deposition allowed for the formation of spherical micelles (with SPS and P2VP as the corona and core, respectively) in the thin film. Interestingly, the domain size of the micelles was tunable from approximately 20 to 90 nm on average by controlling either the blend ratio of components or the concentration of polymer solution. Furthermore, nanoporous thin films could be easily prepared by removing the core of micelle-based nanostructures by using a simple solvent etching process, leaving sulfonic acid groups on the surface of nanopores, which can be utilized as potential functional sites. Those resultant nanoporous thin films were conveniently employed as an antireflection layer on a glass substrate, giving a maximum 97.8 % transmittance in the visible wavelength range.

Flexible transition metal dichalcogenide nanosheets for band-selective photodetection.

The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 µm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra.

Effect of GABA Extract of Black Sticky Rice with Giant Embryo on Alcohol-Related Indices After Acute Alcohol Intake in Social Drinkers.

BACKGROUND: This study was performed to evaluate the effect and safety of a high-gamma-aminobutyric acid-containing extract (GABA extract) of black sticky rice with giant embryo (BSRGE) on alcohol-related indices after acute alcohol intake in social drinkers. METHODS: Subjects were randomized to the GABA extract (G) group, GABA extract and alcohol drinking (GA) group, or placebo intake and alcohol drinking (PA) group in a double-blind design. All subjects were administered GABA extract (200 mg GABA) or placebo at 9 am on study days 2 and 3, respectively. Subjects in the GA and PA groups were administered an equivalent dose of alcohol that was diluted in a drinking beverage for a total amount of 240 ml at 11 am on day 3. Blood alcohol concentration (BAC) and the Biphasic Alcohol Effects Scale were measured just before alcohol drinking, and 6 times after alcohol drinking. RESULTS: The peak and area under the curve (AUC) of the total stimulation scale score after alcohol intake in females were significantly higher in the GA than in the PA group, whereas no significant difference was found between the 2 groups in males. The peak and AUC of the total score on the sedation scale after alcohol intake in males were significantly lower in the GA than in the PA group, whereas both were significantly higher in the GA than in the PA group of females. The AUC for BAC in males was significantly lower in the GA than in the PA group, whereas no significant difference was found in females. No adverse events were reported in any of the groups including the G group. CONCLUSIONS: Coadministration of a GABA extract to social drinkers while drinking alcohol is supposed to affect alcohol-related indices in terms of pharmacodynamics and pharmacokinetics and did not induce any adverse events.

Effect of Zhubin (KI9) acupuncture in reducing alcohol craving in patients with alcohol dependence: A randomized placebo-controlled trial.

OBJECTIVE: To examine the effect of acupuncture on Zhubin (KI9) in reducing alcohol craving in alcohol-dependent patients. METHODS: Twenty male alcohol-dependent patients were randomly assigned to two groups, a treatment group (10 cases, age 43.0±6.8 years) and a placebo group (10 cases, age 44.5±7.9 years). The treatment group was treated with real needle acupuncture on Zhubin (KI9) twice a week for 4 weeks, and the control group was treated with placebo needle acupuncture. Both groups were given acupuncture treatment using Park Sham Device (PSD). Alcohol craving was measured by the Visual Analogue Scale (VAS) before treatment to establish a baseline, and after 1, 2, and 4 weeks of treatment. Repeated measures ANOVA was used to determine the main and interaction effects of time and on the outcome measure (VAS). RESULTS: There was a significant effect of time on VAS score (df=3, F=13.3, P<0.01). Main effect of group on VAS score was significant (df=1, F=10.9, P<0.01) and the time×group interaction was also significant (df=3, F=4.7, P<0.01). CONCLUSIONS: Real-needle acupuncture therapy on Zhubin (KI9) showed effectiveness in reducing alcohol craving. These results strongly suggest the usefulness of acupuncture therapy on Zhubin (KI9) in preventing a relapse in alcohol dependent patients.