Layer-specific dynamics of local field potentials in monkey V1 during electrical stimulation.

The mammalian neocortex, organized into six cellular layers or laminae, forms a cortical network within layers. Layer specific computations are crucial for sensory processing of visual stimuli within primary visual cortex. Laminar recordings of local field potentials (LFPs) are a powerful tool to study neural activity within cortical layers. Electric brain stimulation is widely used in basic neuroscience and in a large range of clinical applications. However, the layer-specific effects of electric stimulation on LFPs remain unclear. To address this gap, we conducted laminar LFP recordings of the primary visual cortex in monkeys while presenting a flash visual stimulus. Simultaneously, we applied a low frequency sinusoidal current to the occipital lobe with offset frequency to the flash stimulus repetition rate. We analyzed the modulation of visual-evoked potentials with respect to the applied phase of the electric stimulation. Our results reveal that only the deeper layers, but not the superficial layers, show phase-dependent changes in LFP components with respect to the applied current. Employing a cortical column model, we demonstrate that these in vivo observations can be explained by phase-dependent changes in the driving force within neurons of deeper layers. Our findings offer crucial insight into the selective modulation of cortical layers through electric stimulation, thus advancing approaches for more targeted neuromodulation.

Nationwide trends and incidence of blindness in patients with diabetic retinopathy identified using an age-period-cohort analysis.

OBJECTIVES: To estimate the epidemiologic trends of blindness in patients with diabetic retinopathy (DR) and investigate the age-, period-, and cohort-specific effects on blindness. METHODS: A total of 2.5 million patients with DR aged 20 years or older were included from the Korean National Health Claims database from 2005 to 2019. Non-proliferative DR/ proliferative DR (NPDR/PDR) cohorts were constructed separately. Participants were identified as having a blindness in at least one eye. The incidence of blindness were calculated using a log-linear Poisson age-period-cohort (APC) analysis model, each effect on blindness were estimated for each study group. RESULTS: The incidence of blindness was 1326.62 per 100,000 in the NPDR group and 3397.57 in the PDR group. The blindness rate sharply decreased after 2011, with annual decreases of 5.6% and 4.4% in the NPDR and the PDR groups, respectively. People born between 1920 and 1930 had the highest overall risk of blindness, with the risk decreasing rapidly after that. For those born after 1980, the risk started to increase in both sexes. Among the APC models, the combination model of age, period, and cohort effects showed the highest explanatory power (0.96). CONCLUSIONS: In this nationwide long-term study, blindness in DR was not due to a single epidemiologic cause but rather a combination of biological age, social determinants, and healthcare policies. The increased risk of blindness in individuals in their 20 s and 30 s may even increase in the future and should not be ignored. Therefore, vigilance of younger patients is recommended.

A Comparison of Green, Delta, and Monte Carlo Methods to Select an Optimal Approach for Calculating the 95% Confidence Interval of the Population-attributable Fraction: Guidance for Epidemiological Research.

OBJECTIVES: This study aimed to compare the Delta, Greenland, and Monte Carlo methods for estimating 95% confidence intervals (CIs) of the population-attributable fraction (PAF). The objectives were to identify the optimal method and to determine the influence of primary parameters on PAF calculations. METHODS: A dataset was simulated using hypothetical values for primary parameters (population, relative risk [RR], prevalence, and variance of the beta estimator ) involved in PAF calculations. Three methods (Delta, Greenland, and Monte Carlo) were used to estimate the 95% CIs of the PAFs. Perturbation analysis was performed to assess the sensitivity of the PAF to changes in these parameters. An R Shiny application, the "GDM-PAF CI Explorer," was developed to facilitate the analysis and visualization of these computations. RESULTS: No significant differences were observed among the 3 methods when both the RR and p-value were low. The Delta method performed well under conditions of low prevalence or minimal RR, while Greenland's method was effective in scenarios with high prevalence. Meanwhile, the Monte Carlo method calculated 95% CIs of PAFs that were stable overall, though it required intensive computational resources. In a novel approach that utilized perturbation for sensitivity analysis, was identified as the most influential parameter in the estimation of CIs. CONCLUSIONS: This study emphasizes the necessity of a careful approach for comparing 95% CI estimation methods for PAFs and selecting the method that best suits the context. It provides practical guidelines to researchers to increase the reliability and accuracy of epidemiological studies.

Molecular Engineering of Coordination Ligand for Multifunctional Sol-Gel Oxides.

Here a ligand exchange strategy for synthesizing sol-gel oxides is demonstrated to achieve multifunctionality including direct photolithography, high dielectric strength, and high charge carrier mobility, which is challenging to obtain in such oxides. For this purpose, a series of bidentate ligands with azide termini and ethylene-glycol bridges is synthesized, and these ligands are universally applicable to the synthesis of a variety of dielectric and semiconductor oxides. Optimized photolithography conditions yield a high-quality ZrO2 dielectric film with a high dielectric constant and strength of ≈18 and ≈7 MV cm-1, respectively. Additionally, this strategy is applied to semiconductor oxides such as In2O3 and ZnO, and the all-oxide-patterned solution-processed thin-film transistor (TFT) demonstrates a high charge carrier mobility of ≈40 cm2 V-1 s-1. An oxide TFT array is fully photopatterned on a 4-inch Si wafer; uniform performances are observed across these devices. This study suggests the possibility of realizing multifunctional oxides for application in advanced electronics using simple ligand exchange chemistry.

SrTiO3 and (Ba,Sr)TiO3 Films Epitaxially Grown on SrRuO3 Using Atomic Layer Deposition.

High dielectric constant (k) materials have been investigated to improve the performance of dynamic random access memory (DRAM) capacitors. However, the conventional binary oxides have reached their fundamental limit of k < 100. In this study, we investigated alternative ternary oxides, SrTiO3 (STO) and (Ba,Sr)TiO3 (BSTO), which were epitaxially grown on SrRuO3 (SRO) using atomic layer deposition (ALD). The structural compatibility between SRO and STO enables the in situ crystallization of STO during ALD at a low temperature of 300 °C. Consequently, STO on SRO exhibited no film deformation, a common issue during high temperature postdeposition annealing, and maintained superior crystallinity at a thin thickness down to 50 Å. Furthermore, the dielectric constant of STO can be adjusted by modulating its tunable ferroelectric and dielectric properties through Ba doping. BSTO, with a high dielectric constant (kmax:527) achieved at a Ba doping concentration of approximately 50%, displayed a low leakage current density (3.9 × 10-8 A cm-2 @ 1 V) and demonstrated excellent reliability of 1012 cycles in the metal-insulator-metal capacitors. This study proposes a promising alternative to satisfy the extreme EOT required for next-generation DRAM capacitors.

Natural and Artificial Aging Effects on the Deformation Behaviors of Al-Mg-Zn Alloy Sheets.

This study investigated the effects of aging profiles on the precipitate formation and the corresponding strengthening and deformation behaviors of Al-Mg-Zn alloys. The alloys subjected to natural aging (NA) demonstrated significantly enhanced ductility at equivalent stress levels compared to those subjected to artificial aging (AA). In AA-treated alloys, η' and η-phases with incoherent interfaces were formed, while GP zones and solute clusters were dominantly exhibited in the NA-treated alloy with a coherent interface with the matrix. Due to the change in interface bonding, the dislocation movement and pinning behavior after deformation are varied depending on the aging conditions of Al-Mg-Zn alloy sheet. Thus, the elongation to fracture of the NA alloy sheet was improved compared to that of the AA alloy sheet because of the enhanced work-hardening capacity and the thin precipitate-free zone (PFZ). Deformation textures and dislocation densities varied between NA and AA treatments, as revealed by electron backscatter diffraction (EBSD) and kernel average misorientation (KAM) analysis. The interactions between the precipitates, dislocations, and the PFZ in the AA- and NA-treated alloys were analyzed via transmission electron microscopy (TEM). The insights gained from this research provide a valuable foundation for industrial applications, particularly in sectors demanding lightweight, high-strength materials, where optimizing the aging process can lead to significant performance improvement and cost savings.

Electrochemically Active MoO3/TiN Sulfur Host Inducing Dynamically Reinforced Built-in Electric Field for Advanced Lithium-Sulfur Batteries.

Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520 mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564 mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6 mA h cm-2) under a high sulfur loading of 8.3 mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.

Ultrathin Boron Growth onto Nanodiamond Surfaces via Electrophilic Boron Precursors.

Diamond as a templating substrate is largely unexplored, and the unique properties of diamond, including its large bandgap, thermal conductance, and lack of cytotoxicity, makes it versatile in emergent technologies in medicine and quantum sensing. Surface termination of an inert diamond substrate and its chemical reactivity are key in generating new bonds for nucleation and growth of an overlayer material. Oxidized high-pressure high temperature (HPHT) nanodiamonds (NDs) are largely terminated by alcohols that act as nucleophiles to initiate covalent bond formation when an electrophilic reactant is available. In this work, we demonstrate a templated synthesis of ultrathin boron on ND surfaces using trigonal boron compounds. Boron trichloride (BCl3), boron tribromide (BBr3), and borane (BH3) were found to react with ND substrates at room temperature in inert conditions. BBr3 and BCl3 were highly reactive with the diamond surface, and sheet-like structures were produced and verified with electron microscopy. Surface-sensitive spectroscopies were used to probe the molecular and atomic structure of the ND constructs' surface, and quantification showed the boron shell was less than 1 nm thick after 1-24 h reactions. Observation of the reaction supports a self-terminating mechanism, similar to atomic layer deposition growth, and is likely due to the quenching of alcohols on the diamond surface. X-ray absorption spectroscopy revealed that boron-termination generated midgap electronic states that were originally predicted by density functional theory (DFT) several years ago. DFT also predicted a negative electron surface, which has yet to be confirmed experimentally here. The boron-diamond nanostructures were found to aggregate in dichloromethane and were dispersed in various solvents and characterized with dynamic light scattering for future cell imaging or cancer therapy applications using boron neutron capture therapy (BNCT). The unique templating mechanism based on nucleophilic alcohols and electrophilic trigonal precursors allows for covalent bond formation and will be of interest to researchers using diamond for quantum sensing, additive manufacturing, BNCT, and potentially as an electron emitter.

Safety and feasibility of single-incision laparoscopic distal gastrectomy in overweight and obese gastric cancer patients: a propensity score-matched analysis.

BACKGROUND: The technical challenges and safety concerns of single-incision laparoscopic gastrectomy for overweight and obese gastric cancer patients remain unclear. This study aimed to evaluate the safety and feasibility of single-incision laparoscopic distal gastrectomy (SIDG) compared to multiport laparoscopic distal gastrectomy (MLDG) in overweight and obese gastric cancer patients. METHODS: This study retrospectively analyzed overweight and obese patients (body mass index ≥ 25 kg/m2) and pathologic stage T1 primary gastric adenocarcinoma treated with either SIDG or MLDG. The SIDG and MLDG groups were propensity score matched at a 1:2 ratio using age, sex, height, body weight, American Society of Anesthesiologists classification, year of surgery, pathologic N stage, and anastomosis method as covariates. RESULTS: After 1:2 matching, the study included patients who underwent SIDG (n = 179) and MLDG (n = 358). No significant difference in the number of retrieved lymph nodes was found between the SIDG and MLDG groups (52.8 ± 19.3 vs. 53.9 ± 21.0, P = 0.56). Operation times were significantly shorter in the SIDG group (170.8 ± 60.0 min vs. 186.1 ± 52.6 min, P = 0.004). The postoperative hospital length of stay was comparable between the 2 groups (SIDG: 5.9 ± 3.4 days vs. MLDG: 6.3 ± 5.1 days, P = 0.23), as was postoperative complication rate (SIDG: 13.4% vs. MLDG: 12.8%, P = 0.89). CONCLUSIONS: SIDG was shown to be as safe and feasible as MLDG for overweight and obese gastric cancer patients, with comparable early postoperative complication rates without compromising operation time compared to MLDG.

Cycloadditions of Benzynes with the Azoxy [RN═N+(O-)R'] 1,3-Dipole Tautomer of 1-Hydroxybenzotriazole (HOBT).

1,3-Dipolar cycloadditions of azoxy species are rare. HOBT exists as a pair of tautomers, one of which contains an azoxy subunit. We show that heavily substituted, thermally generated benzynes react with HOBT by engaging the azoxy tautomer to give products having a benzotriazole with a benzyne-derived o-hydroxyaryl group at N2. DFT calculations were used to probe aspects of the mechanism. HOBT analogs of the uronium family (HBTU, HCTU, TATU, and HATU) react in an analogous fashion. The parent 1,2-dehydrobenzene (o-benzyne) generated by the action of (basic) CsF reacts with HOBT in an orthogonal manner to give, exclusively, an N1-arylated product.

Advancing Fab-Compatible Color-Selective Organic Photodiodes: Tailored Molecular Design and Nanointerlayers.

High-performance organic photodiodes (OPDs) and OPD-based image sensors are primarily realized using solution processes based on various additives and coating methods. However, vacuum-processed OPDs, which are more compatible with large-scale production, have received little attention, thereby hindering their integration into advanced systems. This study introduces innovations in the material and device structures to prepare superior vacuum-processed OPDs for commercial applications. A series of vacuum-processable, low-cost p-type semiconductors is developed by introducing an electron-rich cyclopentadithiophene core containing various electron-accepting moieties to fine-tune the energy levels without any significant structural or molecular weight changes. An additional nanointerlayer strategy is used to control the crystalline orientation of the upper-deposited photoactive layer, compensating for device performance reduction in inverted, top-illuminated OPDs. These approaches yielded an external quantum efficiency of 70% and a specific detectivity of 2.0 × 1012 Jones in the inverted structures, which are vital for commercial applications. These OPDs enabled visible-light communications with extremely low bit error rates and successful X-ray image capture.

Dual Chalcogen-Bonding Interaction for High-Performance Filterless Narrowband Organic Photodetectors.

A novel green-absorbing organic molecule featuring dual intramolecular chalcogen bonds is synthesized and characterized. This molecule incorporates two such bonds: one between a tellurium atom and the oxygen atom of a carbonyl moiety, and the other between the tellurium atom and the adjacent nitrogen atom within a pyridine moiety. The molecule, featuring dual intramolecular chalcogen bonds exhibits a narrow absorption spectrum and elevated absorption coefficients, closely aligned with a resonance parameter of approximately 0.5. This behavior is due to its cyanine-like characteristics and favorable electrical properties, which are a direct result of its rigid, planar molecular structure. Therefore, this organic molecule forming dual intramolecular chalcogen bonds achieves superior optoelectronic performance in green-selective photodetectors, boasting an external quantum efficiency of over 65% and a full-width at half maximum of less than 95 nm while maintaining the performance after 1000 h of heating aging at 85 °C. Such organic photodetectors are poised to enhance stacked organic photodetector-on-silicon hybrid image sensors, paving the way for the next-generation of high-resolution and high-sensitivity image sensors.

Change in Pulmonary Arteries after Modified Blalock-Taussig Shunt Procedure: Analysis Based on Computed Tomography.

Background: Although the modified Blalock-Taussig shunt remains the mainstay method of palliation for augmenting pulmonary blood flow in various congenital heart diseases, the shunt must be carefully designed to achieve the best outcomes. This study investigated the effect of shunt configuration on pulmonary artery growth and growth discrepancy. Methods: Twenty patients with successful modified Blalock-Taussig shunt takedown were analyzed. Pulmonary artery and shunt characteristics were obtained using computed tomography scans. Differences in the baseline and follow-up diameter ratios and growth in the ipsilateral and contralateral arteries were calculated. The angle between the shunt and pulmonary artery, as well as the distance from the main pulmonary artery bifurcation, were measured. Correlations between pulmonary arteries and shunt configurations were analyzed. Results: The median interval time between shunt placement and takedown was 154.5 days (interquartile range, 113.25-276.25 days). Follow-up values of the ipsilateral-to-contralateral pulmonary artery diameter ratio showed no significant correlation with the shunt angle (ρ=0.429, p=0.126) or distance (ρ=0.110, p=0.645). The shunt angle and distance from the main pulmonary bifurcation showed no significant correlation (ρ=-0.373, p=0.189). Pulmonary artery growth was negatively correlated with shunt angle (ipsilateral, ρ=-0.565 and p=0.035; contralateral, ρ=-0.578 and p=0.030), but not with distance (ipsilateral, ρ=-0.065 and p=0.786; contralateral, ρ=-0.130 and p=0.586). Conclusion: Shunt configuration had no significant effect on growth imbalance. The angle and distance of the shunt showed no significant correlation with each other. A more vertical shunt was associated with significant pulmonary artery growth. We suggest a more vertical graft design for improved pulmonary artery growth.

Multi-physics simulations for investigating the effect of electrode conditions on transscleral ocular iontophoresis for particulate drug delivery into ocular tissues.

Purpose: Transscleral ocular iontophoresis has been proposed to deliver charged particulate drugs to ocular tissues effectively by transmitting a weak electrical current through the sclera. The electric fields formed are influenced by the electrode conditions, thus affecting the amount of particulate drugs delivered to the ocular tissues via iontophoresis. Computational simulation is widely used to simulate drug concentrations in the eye; therefore, reflecting the characteristics of the drugs in living tissues to the simulations is important for a more precise estimation of drug concentration. In this study, we investigated the effect of electrode conditions (location and size) on the efficacy of transscleral iontophoresis. Methods: We first determined the simulation parameters based on the comparison of the amount of drug in the sclera in the simulation and in vivo experimental results. The injection of the negatively charged nanoparticles into the cul-de-sac of the lower eyelid was simulated. The active electrode (cathode) was attached to the skin immediately above the injection site, while the return electrode (anode) was placed over the eyebrow. The drug concentration distribution in the eye, based on either the location or size of each electrode, was evaluated using the finite element method with the estimated simulation parameters. Results: Our results indicate that drug permeability varies depending on the location and the size of the electrodes. Conclusion: Our findings demonstrate that the determination of optimal electrode conditions is necessary to enhance the effectiveness of transscleral iontophoresis. Supplementary Information: The online version contains supplementary material available at 10.1007/s13534-024-00359-2.

Hyperthermic pressurized intraperitoneal aerosol drug delivery system in a large animal model: a feasibility and safety study.

BACKGROUND: We developed a novel drug delivery system called hyperthermic pressurized intraperitoneal aerosol chemotherapy (HPIPAC) that hybridized Hyperthermic intraperitoneal chemotherapy (HIPEC) and pressurized intraperitoneal aerosol chemotherapy (PIPAC). The present study aims to assess the feasibility and safety of HPIPAC system in a large animal survival model. METHODS: Eleven pigs (eight non-survival models and three survival models) were used in the experiment. The heat module in the HPIPAC controller circulates hyperthermic CO2 in a closed-loop circuit and creates gas-based dry intraperitoneal hyperthermia. Three 12 mm trocars were placed on the abdomen. The afferent CO2 tube wound with heat generating coil was inserted into a trocar, and the efferent tube was inserted into another trocar. Heated CO2 was insufflated and circulated in a closed circuit until the intra-abdominal and peritoneal surface temperature reached 42 °C. 100 ml of 5% dextrose in water was nebulized for 5 min and the closed-loop circulation was resumed for 60 min at 42 °C. Tissue biopsies were taken from several sites from the pigs in the survival model. RESULTS: The average change in core temperature of the pigs was 2.5 ± 0.08 °C. All three pigs displayed no signs of distress, and their vital signs remained stable, with no changes in their diet. In autopsy, inflammatory and fibrotic responses at the biopsy sites were observed without serious pathologic findings. CONCLUSIONS: We successfully proved the feasibility and safety of our novel HPIPAC system in an in-vivo swine survival model.

Photophore-Anchored Molecular Switch for High-Performance Nonvolatile Organic Memory Transistor.

Over the past decade, molecular-switch-embedded memory devices, particularly field-effect transistors (FETs), have gained significant interest. Molecular switches are integrated to regulate the resistance or current levels in FETs. Despite substantial efforts, realizing large memory window with a long retention time, a critical factor in memory device functionality, remains a challenge. This is due to the inability of an isomeric state of a molecular switch to serve as a stable deep trap state within the semiconductor layer. Herein, the study addresses this limitation by introducing chemical bonding between molecular switch and conjugated polymeric semiconductor, facilitating closed isomer of diarylethene (DAE) to operate as a morphologically stable deep trap state. Azide- and diazirine-anchored DAEs are synthesized, which form chemical bonds to the polymer through photocrosslinking, thereby implementing permanent and controllable trapping states nearby conjugated backbone of polymer semiconductor. Consequently, when diazirine-anchored DAE is blended with F8T2 and subjected to photocrosslinking, the resulting organic FETs exhibit remarkable memory performance, including a memory window of 22 V with a retention time over 106 s, a high photoprogrammable on/off ratio over 103, and a high operational stability over 100 photocycles. Further, photophore-anchored DAEs can achieve precise patterning, which enables meticulous control over the semiconductor layer structure.

Study on the Sodium-Doped Titania Interface-Type Memristor.

Memristors integrated into a crossbar-array architecture (CAA) are promising candidates for analog in-memory computing accelerators. However, the relatively low reliability of the memristor device and sneak current issues in CAA remain the main obstacles. Alkali ion-based interface-type memristors are promising solutions for implementing highly reliable memristor devices and neuromorphic hardware. This interface-type device benefits from self-rectifying and forming-free resistive switching (RS), and exhibits relatively low variation from device to device and cycle to cycle. In a previous report, we introduced an in situ grown Na/TiO2 memristor using atomic layer deposition (ALD) and proposed a RS mechanism from experimentally measured Schottky barrier modulation. Self-rectifying RS characteristics were observed by the asymmetric distribution of Na dopants and oxygen vacancies as the Ti metal used as the adhesion layer for the bottom electrode diffuses over the Pt electrode at 250 °C during the ALD process and is doped into the TiO2 layer. Here, we theoretically verify the modulation of the Schottky barrier at the TiO2/Pt electrode interface by Na ions. This study fabricated a Pt/Na/TiO2/Pt memristor device and confirmed its self-rectifying RS characteristics and stable retention characteristics for 24 h at 85 °C. Additionally, this device exhibited relative standard deviations of 27 and 7% in the high and low resistance states, respectively, in terms of cycle-to-cycle variation. To verify the RS mechanism, we conducted density functional theory simulations to analyze the impact of Na cations at interstitial sites on the Schottky barrier. Our findings can contribute to both fundamental understanding and the design of high-performance memristor devices for neuromorphic computing.

Novel Conversions of a Multifunctional, Bio-sourced Lactone Carboxylic Acid.

The plant-derived compounds furfuryl alcohol and itaconic anhydride are known to undergo a Diels-Alder reaction at room temperature and in bulk to efficiently give an alkene-containing lactone carboxylic acid. Reported here is the conversion of this substance to a variety of derivatives via hydrogenation, epoxidation, or halolactonization reactions. Most notable is the formation of a set of three related acrylate or methacrylate esters (see graphical abstract) produced by direct acylative ring opening of ether bonds using Sc(OTf)3 and (meth)acrylic anhydride. These esters are viewed as promising candidates for use as biorenewable monomers in reversible addition-fragmentation chain transfer (RAFT) polymerization reactions.

Production of safe cyanobacterial biomass for animal feed using wastewater and drinking water treatment residuals.

The growing interest in microalgae and cyanobacteria biomass as an alternative to traditional animal feed is hindered by high production costs. Using wastewater (WW) as a cultivation medium could offer a solution, but this approach risks introducing harmful substances into the biomass, leading to significant safety concerns. In this study, we addressed these challenges by selectively extracting nitrates and phosphates from WW using drinking water treatment residuals (DWTR) and chitosan. This method achieved peak adsorption capacities of 4.4 mg/g for nitrate and 6.1 mg/g for phosphate with a 2.5 wt% chitosan blend combined with DWTR-nitrogen. Subsequently, these extracted nutrients were employed to cultivate Spirulina platensis, yielding a biomass productivity rate of 0.15 g/L/d, which is comparable to rates achieved with commercial nutrients. By substituting commercial nutrients with nitrate and phosphate from WW, we can achieve a 18 % reduction in the culture medium cost. While the cultivated biomass was initially nitrogen-deficient due to low nitrate levels, it proved to be protein-rich, accounting for 50 % of its dry weight, and contained a high concentration of free amino acids (1260 mg/g), encompassing all essential amino acids. Both in vitro and in vivo toxicity tests affirmed the biomass's safety for use as an animal feed component. Future research should aim to enhance the economic feasibility of this alternative feed source by developing efficient adsorbents, utilizing cost-effective reagents, and implementing nutrient reuse strategies in spent mediums.

Optimizing electrode placement for transcranial direct current stimulation in nonsuperficial cortical regions: a computational modeling study.

Transcranial direct current stimulation (tDCS) is a noninvasive brain stimulation technique for modulating neuronal excitability by sending a weak current through electrodes attached to the scalp. For decades, the conventional tDCS electrode for stimulating the superficial cortex has been widely reported. However, the investigation of the optimal electrode to effectively stimulate the nonsuperficial cortex is still lacking. In the current study, the optimal tDCS electrode montage that can deliver the maximum electric field to nonsuperficial cortical regions is investigated. Two finite element head models were used for computational simulation to determine the optimal montage for four different nonsuperficial regions: the left foot motor cortex, the left dorsomedial prefrontal cortex (dmPFC), the left medial orbitofrontal cortex (mOFC), and the primary visual cortex (V1). Our findings showed a good consistency in the optimal montage between two models, which led to the anode and cathode being attached to C4-C3 for the foot motor, F4-F3 for the dmPFC, Fp2-F7 for the mOFC, and Oz-Cz for V1. Our suggested montages are expected to enhance the overall effectiveness of stimulation of nonsuperficial cortical areas. Supplementary Information: The online version contains supplementary material available at 10.1007/s13534-023-00335-2.