RESUMO
Inhalation of aerosols such as pharmaceutical aerosols or virus aerosol uptake is of great concern to the human population. To elucidate the underlying aerosol dynamics, the deposition fractions (DFs) of aerosols in healthy and asthmatic human airways of generations 13-15 are predicted. The Navier-stokes equations governing the gaseous phase and the discrete phase model for particles' motion are solved using numerical methods. The main forces responsible for deposition are inertial impaction forces and complex secondary flow velocities. The curvatures and sinusoidal folds in the asthmatic geometry lead to the formation of complex secondary flows and hence higher DFs. The intensities of complex secondary flows are strongest at the generations affected by asthma. The DF in the healthy airways is 0%, and it ranges from 1.69% to 52.93% in the asthmatic ones. From this study, the effects of the pharmaceutical aerosol particle diameters in the treatment of asthma patients can be established, which is conducive to inhibiting the inflammation of asthma airways. Furthermore, with the recent development of COVID-19 which causes pneumonia, the predicted physics and effective simulation methods of bioaerosols delivery to asthma patients are vital to prevent the exacerbation of the chronic ailment and the epidemic.
Assuntos
Asma , COVID-19 , Aerossóis , Asma/tratamento farmacológico , Simulação por Computador , Humanos , Pulmão , Modelos Biológicos , Tamanho da Partícula , SARS-CoV-2RESUMO
This study is motivated by the amplified transmission rates of the SAR-CoV-2 virus in areas with high concentrations of fine particulates (PM2.5) as reported in northern Italy and Mexico. To develop a deeper understanding of the contribution of PM2.5 in the propagation of the SAR-CoV-2 virus in the population, the deposition patterns and efficiencies (DEs) of PM2.5 laced with the virus in healthy and asthmatic airways are studied. Physiologically correct 3-D models for generations 10-12 of the human airways are applied to carry out a numerical analysis of two-phase flow for full breathing cycles. Two concentrations of PM2.5 are applied for the simulation, i.e., 30 µgâ m-3 and 80 µgâ m-3 for three breathing statuses, i.e., rest, light exercise, and moderate activity. All the PM2.5 injected into the control volume is assumed to be 100% contaminated with the SAR-CoV-2 virus. Skewed air-flow phenomena at the bifurcations are proportional to the Reynolds number at the inlet, and their intensity in the asthmatic airway exceeded that of the healthy one. Upon exhalation, two peak air-flow vectors from daughter branches combine to form one big vector in the parent generation. Asthmatic airway models has higher deposition efficiencies (DEs) for contaminated PM2.5 as compared to the healthy one. Higher DEs arise in the asthmatic airway model due to complex secondary flows which increase the impaction of contaminated PM2.5 on airways' walls.
Assuntos
Asma , Pulmão , Simulação por Computador , Humanos , Itália , México , Modelos Biológicos , Material Particulado/toxicidadeRESUMO
The deposition phenomenon of microparticle and SAR-CoV-2 laced bioaerosol in human airways is studied by Taguchi methods and response surface methodology (RSM). The data used herein is obtained from simulations of airflow dynamics and deposition fractions of drug particle aerosols in the downstream airways of asthma patients using computational fluid dynamics (CFD) and discrete particle motion (DPM). Three main parameters, including airflow rate, drug dose, and particle size, affecting aerosol deposition in the lungs of asthma patients are examined. The highest deposition fraction (DF) is obtained at the flow rate of 45 L min-1, the drug dose of 200 µg·puff-1, and the particle diameter of 5 µm. The optimized combination of levels for the three parameters for maximum drug deposition is performed via the Taguchi method. The importance of the influencing factors rank as particle size > drug dose > flow rate. RSM reveals that the combination of 30 L min-1, 5 µm, 200 µg·puff- has the highest deposition fraction. In part, this research also studied the deposition of bioaerosols contaminated with the SAR-CoV-2 virus, and their lowest DF is 1.15%. The low DF of bioaerosols reduces the probability of the SAR-CoV-2 virus transmission.
Assuntos
Hidrodinâmica , Pulmão , Administração por Inalação , Aerossóis , Simulação por Computador , Humanos , Modelos Biológicos , Tamanho da PartículaRESUMO
An innovative method for utilizing synthetic calcium fluoride (CaF2), recovered from fluoride-containing semiconductor wastewater, and waste sulfuric acid (H2SO4) to produce hydrofluoric acid (HF) was investigated. The research was set to study the low-temperature production of HF via reaction of synthetic CaF2 and waste H2SO4. The impact of four factors, including H2SO4 concentration, total volume (H2SO4 + H2O)/CaF2 ratio, drying temperature of synthetic CaF2, and reaction carried out under different temperature, on HF productivity was investigated in this study. HF yield increased with increasing H2SO4 concentration and total volume/CaF2 ratio under room temperature. Generally, reactions carried out under low-temperature (< 100 °C) had a positive impact on HF yield. The higher temperature led to an increase in absorbed-HF but a decrease in total-HF. The reaction of commercial CaF2 and 70% H2SO4 had a higher absorbed-HF yield of 61.7% than synthetic CaF2 and 70% waste H2SO4, which had a yield of 36%. This was due to the higher purity of the commercial CaF2 and fewer interference ions in H2SO4. HF productivity was lowered by CaSO4, which hindered the reaction of reactants and also the generation of fluorosulfuric acid.
Assuntos
Fluoreto de Cálcio , Ácido Fluorídrico , Eletrônica , Reciclagem , Ácidos SulfúricosRESUMO
In this study, the polychlorinated dibenzo-p-dioxin/furan (PCDD/F) levels in 381 soil samples coming from different background areas (nâ¯=â¯238) and contaminated areas (nâ¯=â¯143) in Taiwan were investigated from 2011 to 2015 using high resolution gas chromatograph/high resolution mass spectrometry (HRGC/HRMS). The contaminated areas showed higher PCDD/F contamination as compared to the background areas (1230 vs 749â¯pg/g dry weight (dw)); 14.0 vs 6.25â¯pg WHO2005-TEQ/g dw). The lowest levels were recorded in the outlying islands (1.28â¯pg WHO2005-TEQ/g dw). PCDD/F congener distribution profiles in the background and contaminated areas as well as on the islands varied. OCDD was the dominant congener in almost all locations, including the northern background (87.7%) and central contaminated (74.2%) areas. Other dominant species included OCDF and 1,2,3,4,6,7,8-HpCDD. Levels of PCDD/F-TEQs in Taiwanese soils, including the background areas, were higher than in some developing countries and regions with global background levels due to high industrialization except for the contaminated areas. Geographic differences in dioxin-contaminated soils were also shown in this study. Higher soil dioxin-TEQs were observed in locations with high populations and population densities. Despite the limitations, the economic status of Taiwan represented by the annual averaged family income (AAFI) was positively correlated to soil dioxin-TEQs.
Assuntos
Dibenzofuranos Policlorados/análise , Dibenzodioxinas Policloradas/análise , Poluentes do Solo/análise , Desenvolvimento Econômico , Monitoramento Ambiental , Cromatografia Gasosa-Espectrometria de Massas , Ilhas , Bifenilos Policlorados/análise , Solo/química , Poluentes do Solo/economia , TaiwanRESUMO
Persistent organic pollutants (POPs), including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs), have been identified in penguins, lichens, soils, and ornithogenic soils in the Antarctic coastal environment in this study. To the best of our knowledge, no previous study has reported PBDD/F and PBB data from Antarctica. The POP mass contents in penguins were in the following order: PCBs >> PBDEs >> PCDD/Fs; PCBs were the dominant pollutants (6310-144,000 pg/g-lipid), with World Health Organization toxic equivalency values being 2-14 times higher than those of PCDD/Fs. Long-range atmospheric transport is the most primary route by which POPs travel to Antarctica; however, local sources, such as research activities and penguin colonies, also influence POP distribution in the local Antarctic environment. In penguins, the biomagnification factor (BMF) of PCBs was 61.3-3760, considerably higher than that for other POPs. According to BMF data in Adélie penguins, hydrophobic PBDE congeners were more biomagnified at log Kow > 6, and levels decreased at log Kow > 7.5 because larger molecular sizes inhibited transfer across cell membranes.
Assuntos
Dibenzofuranos Policlorados/análise , Monitoramento Ambiental/métodos , Poluentes Ambientais/análise , Éteres Difenil Halogenados/análise , Bifenilos Policlorados/análise , Dibenzodioxinas Policloradas/análise , Spheniscidae/metabolismo , Animais , Regiões Antárticas , Dibenzofuranos Policlorados/farmacocinética , Poluentes Ambientais/farmacocinética , Éteres Difenil Halogenados/farmacocinética , Humanos , Bifenilos Policlorados/farmacocinética , Dibenzodioxinas Policloradas/farmacocinética , Solo/químicaRESUMO
This investigation studied the size distributions of particulate matter (PM), particulate carbon, and polycyclic aromatic hydrocarbons (PAHs) that are emitted from a generator that is fueled by diesel that is blended with waste-edible-oil-biodiesel and water-containing acetone. PM samples were collected using a micro-orifice uniform deposit impactor (MOUDI) and a Nano-MOUDI (with aerodynamic diameters of 0.01-18 µm). The results reveal that waste-edible biodiesel blended with water-containing acetone (W5WA3 or W20WA3) at a load of 3 kW emitted lower ΣPM, ΣPM-EC, ΣPM-OC, ΣT-PAHs or ΣT-BaPeq concentrations than did D100, in all 13 particle size ranges, and these reductions of emissions of submicron particles exceeded 85%. Furthermore, W20WA3 emitted significantly lower concentrations of Total-PAHs and Total-BaPeq in four nano/ultrafine particle size ranges. Therefore, water-containing acetone biodieselhols can be utilized as alternatives to petroleum diesel as fuel to reduce the dangers to human health that are posed by emissions from diesel engines.
Assuntos
Poluentes Atmosféricos/análise , Monitoramento Ambiental , Material Particulado/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Tamanho da Partícula , Emissões de Veículos/análiseRESUMO
The torrefaction characteristics and energy utilization of microalga Chlamydomonas sp. JSC4 (C. sp. JSC4) residue under the combination of temperature and duration are studied by examining contour maps. The torrefaction temperature on the contour line of solid yield has a trend to linearly decrease with increasing duration. An index of relative energy efficiency (REE) is introduced to identify the performance of energy utilization for upgrading biomass. For a fixed energy yield, the optimal operation can be found to maximize the heating value of the biomass and minimize the solid yield. The energy utilization under the combination of a high temperature and a short duration is more efficient than that of a low temperature and a long duration. The maximum REE along the contour line of energy yield is always exhibited at the highest temperature (300°C) where the energy efficiency can be enlarged by a factor of at least 2.36.
Assuntos
Biocombustíveis , Microalgas/metabolismo , Biomassa , Biotecnologia/métodos , Chlamydomonas/metabolismo , Temperatura , Termodinâmica , TermogravimetriaRESUMO
This study conducted batch experiments to evaluate the potential of butanol production from microalgae biodiesel residues by Clostridium acetobutylicum. The results indicated that with 90 g/L of glucose as the sole substrate the highest butanol yield of 0.2 g/g-glucose was found, but the addition of butyrate significantly enhanced the butanol yield. The highest butanol yield of 0.4 g/g-glucose was found with 60 g/L of glucose and 18 g/L of butyrate. Using microalgae biodiesel residues as substrate, C. acetobutylicum produced 3.86 g/L of butanol and achieved butanol yield of 0.13 g/g-carbohydrate via ABE fermentation, but the results indicated that approximately one third of carbohydrate was not utilized by C. acetobutylicum. Biological butanol production from microalgae biodiesel residues can be possible, but further research on fermentation strategies are required to improve production yield.
Assuntos
Biocombustíveis , Butanóis/metabolismo , Clostridium acetobutylicum/metabolismo , Microalgas/metabolismo , Butiratos/farmacologia , Clostridium acetobutylicum/efeitos dos fármacos , Fermentação/efeitos dos fármacos , Glucose/farmacologia , Hidrólise , Microalgas/efeitos dos fármacos , ResíduosRESUMO
This investigation examines the particulate matter (PM), particulate carbon, polycyclic aromatic hydrocarbons (PAHs), and nitrogen oxides (NOx) emitted from a generator fueled by petroleum diesel blended with waste-edible-oil-biodiesel and water-containing acetone. Experimental results show that using biodieselhols with water-containing (or pure) acetone as the fuel of generator, in comparison to using petroleum diesel, significantly reduces PM emission; roughly, this reduction increased as percentage of water-containing acetone increased. When the percentages of waste-edible-oil-biodiesel were ≤ 5 vol%, adding pure or water-containing acetone (1-3 vol%) to biodieselhols generated emission reductions of NOx, PM, particle-bound organic carbon (OC), total-PAHs, and total-BaPeq. Consequently, using water-containing acetone biodieselhols as an alternative generator fuel is feasible and helps recycle and reuse waste solvents containing water-containing acetone.
Assuntos
Acetona , Poluentes Atmosféricos/análise , Biocombustíveis , Óxidos de Nitrogênio/análise , Material Particulado/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluição do Ar/prevenção & controle , Carbono/análise , Dióxido de Carbono/análise , Fontes Geradoras de Energia , Monitoramento Ambiental , Óleos , ÁguaRESUMO
This study investigates the atmospheric occurrence of persistent organic pollutants (POPs) over the Pacific Ocean near southern Taiwan and the northern Philippines. We determined sixty-six compounds, including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (DLPCBs), polybrominated diphenyl ethers (PBDEs), as well as polychlorinated diphenyl ethers (PCDEs), polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs), and polybrominated biphenyls (PBBs), in air samples simultaneously collected from the offshore oceanic atmosphere (n=6) and over a rural area (n=2). We calculated the atmospheric World Health Organization 2005 toxic equivalency levels (WHO2005-TEQ), for the total dioxin-like POPs, including PCDD/Fs, DLPCBs, and PBDD/Fs, being 0.00612 pg WHO2005-TEQ/m(3) and 0.0138 pg WHO2005-TEQ/m(3) over the ocean and land, respectively. We found unexpected lower averaged atmospheric PBDE concentrations in the rural area (15.9 pg/m(3)) than over the ocean (31.1 pg/m(3)) due to higher levels of the BDE209 congener, although the difference was not statistically significant. We have compared and reported our field results with previously published datasets over the global oceans, which suggest PCBs and PBDEs are the dominant chemical contaminants in the global oceanic atmosphere among these halogenated POPs (e.g. PCBs and Σdi-hepta PBDEs could be found in the range of 0.09-48.7 and 8.07-94.0 pg/m(3), respectively, including our dataset). However, there are still very few investigations on the global atmospheric levels of PBDD/Fs, PCDEs and PBBs and our data sums to these earlier studies. Finally, we point out that the halogenated POPs originated from Taiwan or the continental East Asia which could easily reach remote ocean sites via atmospheric transport.
Assuntos
Poluentes Atmosféricos/análise , Atmosfera/química , Monitoramento Ambiental , Éteres Difenil Halogenados/análise , Oceano Pacífico , Filipinas , Bifenil Polibromatos , Bifenilos Policlorados/análise , Dibenzodioxinas Policloradas/análise , TaiwanRESUMO
The manufacture of water-containing butanol diesel blends requires no excess dehydration and surfactant addition. Therefore, compared with the manufacture of conventional bio-alcohols, the energy consumption for the manufacture of water-containing butanol diesel blends is reduced, and the costs are lowered. In this study, we verified that using water-containing butanol diesel blends not only solves the tradeoff problem between nitrogen oxides (NOx) and particulate matter emissions from diesel engines, but it also reduces the emissions of persistent organic pollutants (POPs), including polycyclic aromatic hydrocarbons, polychlorinated dibenzo-p-dioxins and dibenzofurans, polychlorinated biphenyls, polychlorinated diphenyl ethers, polybrominated dibenzo-p-dioxins and dibenzofurans, polybrominated biphenyls and polybrominated diphenyl ethers. After using blends of B2 with 10% and 20% water-containing butanol, the POP emission factors were decreased by amounts in the range of 22.6%-42.3% and 38.0%-65.5% on a mass basis, as well as 18.7%-78.1% and 51.0%-84.9% on a toxicity basis. The addition of water-containing butanol introduced a lower content of aromatic compounds and most importantly, lead to more complete combustion, thus resulting in a great reduction in the POP emissions. Not only did the self-provided oxygen of butanol promote complete oxidation but also the water content in butanol diesel blends could cause a microexplosion mechanism, which provided a better turbulence and well-mixed environment for complete combustion.
Assuntos
Poluentes Atmosféricos/análise , Poluição do Ar/prevenção & controle , Butanóis/química , Gasolina/análise , Compostos Orgânicos/análise , Emissões de Veículos/análise , Água/química , Peso Molecular , Nitratos/análise , Nitritos/análise , Compostos Orgânicos/química , Compostos Orgânicos/toxicidade , Material Particulado/análiseRESUMO
Biodiesel is one of alternative energies that have been extensively discussed and studied. This research investigates the characteristics of particulate matter (PM), particulate carbon, and polycyclic aromatic hydrocarbons (PAHs) emitted from a generator fueled by waste-edible-oil-biodiesel with acetone and isopropyl alcohol (IPA) addition. The tested biodieselhols consisted of pure diesel oil (D100) with 1-3 vol.% pure acetone (denoted as A), 1-70 vol.% waste-edible-oil-biodiesel (denoted as W), and 1 vol.% pure isopropyl alcohol (the stabilizer, denoted as P). The results show that in comparison to W1D99, W3D97, W5D95, W10D90, and W20D80, the use of biodieselhols achieved additional reduction of PM and particulate organic carbon (OC) emission, and such reduction increased as the addition percentage of pure acetone increased. Regardless of the percentages of added waste-edible-oil-biodiesel, acetone, and isopropyl alcohol, the use of biodieselhol in place of D100 could reduce the emissions of Total-PAHs (by 6.13-42.5% (average = 24.1%)) and Total-BaPeq (by 16.6-74.8% (average = 53.2%)) from the diesel engine generator. Accordingly, the W/D blended fuels (W<20 vol.%) containing acetone (1-3 vol.%) and isopropyl alcohol (1 vol.%) are a potential alternative fuel for diesel engine generators because they substantially reduce emissions of PM, particulate OC, Total-PAHs, and Total-BaPeq.
RESUMO
The particle size distributions and leaching characteristics of polybrominated diphenyl ethers (PBDEs) in the bottom ashes of two Taiwanese municipal solid waste incinerators (MSWIs A and B) were investigated to evaluate PBDE leaching into the environment through reutilization of bottom ashes. The PBDE contents in the bottom ashes of the MSWIs (29.0-243 ng/g) could be two orders higher than those in rural and urban soils. The PBDE fraction of the bottom ashes was more distributed in larger particles (> 0.25 mm). Similar trends were found for the PBDE contents in the bottom ashes and their PBDE leaching concentrations, revealing that the elevated PBDE contents in the bottom ashes may lead to a higher PBDE leaching mass. The leaching of PBDEs is attributed to diffusion driven by the concentration gradient and effective surface area. The normalized leaching ratios (NLRs) of PBDEs for the bottom ashes of the MSWIs are about four orders greater than those of PBDE-related raw materials and products, and this may be due to their porous structures having much greater effective surface area. The elevated NLRs of PBDEs thus deserve more attention when bottom ashes are recycled and reutilized as construction materials.
Assuntos
Cinza de Carvão/química , Éteres Difenil Halogenados/análise , Substâncias Perigosas/análise , Incineração , Resíduos Sólidos/análise , Modelos Químicos , Tamanho da PartículaRESUMO
The emissions of polybrominated dibenzo-pdioxins,dibenzofurans (PBDD/Fs), and polybrominated diphenyl ethers (PBDEs) from trial combustion of 10 wt % dried industrial wastewater-treatment sludge (IWTS) and 90 wt % woodchip in an industrial boiler were investigated and compared to that from woodchip combustion. The PBDD/F toxic equivalent (TEQ) andPBDE emissions increased from 0.121 pg TEQ Nm−3 and 2260 pgNm−3, respectively, of the woodchip combustion to 0.211 pg TEQNm−3 and 4200 pg Nm−3, respectively, of the trial combustion.PBDD/F and PBDE congener profiles of inputs and outputs of the same type of combustion were similar; they also show similarity between woodchip and trial combustions, revealing that the destruction pathway was little affected by the introduction of the IWTS. The fates of PBDD/Fs and PBDEs show that the indigenous pollutants in the feed were effectively depleted (>93.5%). The dominant releasing route of PBDD/F and PBDE shifted from the stack flue gas of woodchip combustion to the ashes of trial combustion. This study demonstrates that co-combustion not only handles the fast growing sludge stream but also yields a saving of 26.3% in the fuel cost and treatment fees of sludge and ashes.
Assuntos
Dioxinas/química , Monitoramento Ambiental , Éteres Difenil Halogenados/química , Esgotos , Águas Residuárias , Madeira/química , Poluentes Atmosféricos/análise , Gases/análise , ResíduosRESUMO
The reaction characteristics of four biomass materials (i.e. oil palm fiber, coconut fiber, eucalyptus, and Cryptomeria japonica) with non-oxidative and oxidative torrefaction at various superficial velocities are investigated where nitrogen and air are used as carrier gases. Three torrefaction temperatures of 250, 300, and 350 °C are considered. At a given temperature, the solid yield of biomass is not affected by N2 superficial velocity, revealing that the thermal degradation is controlled by heat and mass transfer in biomass. Increasing air superficial velocity decreases the solid yield, especially in oil palm fiber and coconut fiber, implying that the torrefaction reaction of biomass is dominated by surface oxidation. There exists an upper limit of air superficial velocity in the decrement of solid yield, suggesting that beyond this limit the thermal degradation of biomass is no longer governed by surface oxidation, but rather is controlled by internal mass transport.
Assuntos
Biocombustíveis , Nitrogênio/química , Oxigênio/química , Ar , Atmosfera , Biomassa , Cocos/metabolismo , Cryptomeria/metabolismo , Eucalyptus/metabolismo , Gases , Temperatura Alta , Cinética , Óleo de Palmeira , Óleos de Plantas/química , TemperaturaRESUMO
Torrefaction is a pretreatment method for upgrading biomass as solid fuels. To provide flexible operations for effectively upgrading biomass at lower costs, the aim of this study was to investigate the properties of oil palm fiber and eucalyptus pretreated in nitrogen and air atmospheres at temperatures of 250-350°C for 1h. Based on energy and solid yield and introducing an energy-mass co-benefit index (EMCI), oil palm fiber pretreatment under nitrogen at 300°C provided the solid fuel with higher energy density and less volume compared to other temperatures. Pretreatment of oil palm fiber in air resulted in the fuel with low solid and energy yields and is therefore not recommended. For eucalyptus, nitrogen and air can be employed to upgrade the biomass, and the suggested temperatures are 325 and 275°C, respectively.
Assuntos
Ar , Biotecnologia/métodos , Carbono/análise , Eucalyptus/química , Nitrogênio/química , Óleos de Plantas/química , Temperatura , Biomassa , Óleo de Palmeira , VolatilizaçãoRESUMO
This study examines the heating value and combustion efficiency of organic sludge derived fuel, spent activated carbon derived fuel, and derived fuel from a mixture of organic sludge and spent activated carbon. Spent activated carbon was sampled from an air pollution control device of an incinerator and characterized by XRD, XRF, TG/DTA, and SEM. The spent activated carbon was washed with deionized water and solvent (1N sulfuric acid) and then processed by the organic sludge derived fuel manufacturing process. After washing, the salt (chloride) and sulfide content could be reduced to 99% and 97%, respectively; in addition the carbon content and heating value were increased. Different ratios of spent activated carbon have been applied to the organic sludge derived fuel to reduce the NO(x) emission of the combustion.
Assuntos
Carbono/química , Esgotos , Microscopia Eletrônica de Varredura , Tamanho da Partícula , Termogravimetria , Difração de Raios XRESUMO
Highly efficient butanol-producing bacterial microflora were isolated from hydrogen-producing sludge of a sewage treatment plant. Based on denaturing gradient gel electrophoresis (DGGE) analysis and 16s rDNA comparison, four strains from the butanol-producing microflora were identified as Clostridium saccharoperbutylacetonicum, Clostridium butylicum, Clostridium beijernckii, and Clostridium acetobutylicum. The effects of glucose, FeSO(4) · 7H(2)O and yeast extract concentrations on the butanol production by the mixture culture were investigated on batch mode. The medium composition for bio-butanol production was optimized using the Box-Behnken design and response surface methodology (RSM). The maximum butanol production rate (0.25 ± 0.02 g/L-h) and concentration (12.4 g/L) were obtained under the condition of glucose concentration, 60 g/L; FeSO(4) · 7H(2)O, 0.516 g/L; yeast extract concentration, 5.13 g/L. Addition of 6.0 g/L butyric acid significantly increased the butanol titer to 17.51 ± 0.49 g/L. Pressurized fermentation strategy (employed with a 5L fermentor) further enhanced the butanol concentration to 21.35 g/L, along with a maximum butanol rate of 1.25 g/L-h.
Assuntos
Butanóis/metabolismo , Clostridium/metabolismo , Solventes/metabolismo , Fermentação , Glucose/metabolismoRESUMO
In this study, ambient air samples from different atmospheric environments were examined for both PBDE and PCDD/F characteristics to verify that combustion is a significant PBDE emission source. The mean ± SD atmospheric PBDE concentrations were 165 ± 65.0 pg Nm(-3) in the heavy steel complex area and 93.9 ± 24.5 pg Nm(-3) in the metals complex areas, 4.7 and 2.7 times higher than that (35.3 ± 15.5 pg Nm(-3)) in the urban areas, respectively. The statistically high correlation (r=0.871, p<0.001) found between the atmospheric PBDE and PCDD/F concentrations reveals that the combustion sources are the most likely PBDE emission sources. Correspondence analysis shows the atmospheric PBDEs of the heavy steel and metals complex areas are associated with BDE-209, -203, -207, -208, indicative of combustion source contributions. Furthermore, the PBDEs in urban ambient air experience the influence of the evaporative releases of the commercial penta- and octa-BDE mixtures, as well as combustion source emissions. By comparing the PBDE homologues of indoor air, urban ambient air, and stack flue gases of combustion sources, we found that the lighter brominated PBDEs in urban ambient air were contributed by the indoor air, while their highly brominated ones were from the combustion sources, such as vehicles. The developed source identification measure can be used to clarify possible PBDE sources not only for Taiwanese atmosphere but also for other environmental media in other countries associated with various emission sources in the future.