RESUMO
Piezoelectric energy harvesting systems have been drawing the attention of the research community over recent years due to their potential for recharging/replacing batteries embedded in low-power-consuming smart electronic devices and wireless sensor networks. However, conventional linear piezoelectric energy harvesters (PEH) are often not a viable solution in such advanced practices, as they suffer from a narrow operating bandwidth, having a single resonance peak present in the frequency spectrum and very low voltage generation, which limits their ability to function as a standalone energy harvester. Generally, the most common PEH is the conventional cantilever beam harvester (CBH) attached with a piezoelectric patch and a proof mass. This study investigated a novel multimode harvester design named the arc-shaped branch beam harvester (ASBBH), which combined the concepts of the curved beam and branch beam to improve the energy-harvesting capability of PEH in ultra-low-frequency applications, in particular, human motion. The key objectives of the study were to broaden the operating bandwidth and enhance the harvester's effectiveness in terms of voltage and power generation. The ASBBH was first studied using the finite element method (FEM) to understand the operating bandwidth of the harvester. Then, the ASBBH was experimentally assessed using a mechanical shaker and real-life human motion as excitation sources. It was found that ASBBH achieved six natural frequencies within the ultra-low frequency range (<10 Hz), in comparison with only one natural frequency achieved by CBH within the same frequency range. The proposed design significantly broadened the operating bandwidth, favouring ultra-low-frequency-based human motion applications. In addition, the proposed harvester achieved an average output power of 427 µW at its first resonance frequency under 0.5 g acceleration. The overall results of the study demonstrated that the ASBBH design can achieve a broader operating bandwidth and significantly higher effectiveness, in comparison with CBH.
Assuntos
Aceleração , Vibração , Humanos , Fenômenos Físicos , Movimento (Física) , Contagem de Células SanguíneasRESUMO
In recent years, harvesting energy from ubiquitous ultralow-frequency vibration sources, such as biomechanical motions using piezoelectric materials to power wearable devices and wireless sensors (e.g., personalized assistive tools for monitoring human locomotion and physiological signals), has drawn considerable interest from the renewable energy research community. Conventional linear piezoelectric energy harvesters (PEHs) generally consist of a cantilever beam with a piezoelectric patch and a proof mass, and they are often inefficient in such practical applications due to their narrow operating bandwidth and low voltage generation. Multimodal harvesters with multiple resonances appear to be a viable solution, but most of the previously proposed designs are unsuitable for ultralow-frequency vibration. This study investigated a novel multimode design, which included a bent branched beam harvester (BBBH) to enhance PEHs' bandwidth output voltage and output power for ultralow-frequency applications. The study was conducted using finite element method (FEM) analysis to optimize the geometrical design of the BBBH on the basis of the targeted frequency spectrum of human motion. The selected design was then experimentally studied using a mechanical shaker and human motion as excitation sources. The performance was also compared to the previously proposed V-shaped bent beam harvester (VBH) and conventional cantilever beam harvester (CBH) designs. The results prove that the proposed BBBH could harness considerably higher output voltages and power with lower idle time. Its operating bandwidth was also remarkably widened as it achieved three close resonances in the ultralow-frequency range. It was concluded that the proposed BBBH outperformed the conventional counterparts when used to harvest energy from ultralow-frequency sources, such as human motion.
RESUMO
Sunlight disinfection is important for treatment of wastewater within maturation ponds. This study analyses the movement of Escherichi coli within a slice of a maturation pond, being affected by stratification, sunlight attenuation and mixing driven by wind shear and natural convection using computational fluid dynamics (CFD). Since the exposure to ultraviolet light is most effective in the near-surface region of the pond, natural convective mixing mechanisms to transport the pathogens from the lower parts of the pond are critical for disinfection efficacy. Different turbulence models are considered for closure of the momentum conservation equations and compared with a laminar flow simulation and a completely stirred tank reactor (CSTR) model. The effect of turbulence and stratification is shown to be significant for thermal and velocity distributions, and predictions of E. coli die-off. Greater volume-averaged E. coli die-off was predicted by the computationally convenient CSTR model than the CFD turbulence and laminar models. The simulation results are compared with experimental data and show that complete vertical mixing occurs in a diurnal pattern aiding die-off in sunlight-attenuating water. Practical applications of the model can assist in management strategies for maturation ponds such as off-take locations/times and evaluating seasonal variations in sunlight disinfection.
Assuntos
Desinfecção , Lagoas , Escherichia coli , Luz Solar , Eliminação de Resíduos LíquidosRESUMO
This study uses magnetic measurements to evaluate the heavy metal contamination of the surface sediments on Shilaoren Beach. The values of the laboratory magnetic measurements have a positive relationship with the concentrations of Fe, Mn, Cr, Ni, As and Pb. The field magnetic parameter provides an effective and rapid method for evaluating the distribution and dispersal of heavy metal. Sediments with higher heavy metal contents generally accumulate near higher and lower tide lines on the beach, reflecting the control of waves and tides. The sewage and stormwater outlets are the primary sources of the heavy metal contamination. Variations in seasonal waves and winds affect the sediment transport and the heavy metal distribution patterns. Based on the Australian ISQG-Low sediment quality criteria, Fe, Mn and Cr generally exhibit intermediate accumulation levels, whereas Pb and Zn exhibit higher accumulation levels because of the socioeconomic status of the area surrounding the beach.
Assuntos
Monitoramento Ambiental , Sedimentos Geológicos , Metais Pesados/análise , Poluentes Químicos da Água/análise , China , MagnetismoRESUMO
For dose-response analysis in quantitative microbial risk assessment (QMRA), the exact beta-Poisson model is a two-parameter mechanistic dose-response model with parameters α>0 and ß>0, which involves the Kummer confluent hypergeometric function. Evaluation of a hypergeometric function is a computational challenge. Denoting PI(d) as the probability of infection at a given mean dose d, the widely used dose-response model PI(d)=1-(1+dß)-α is an approximate formula for the exact beta-Poisson model. Notwithstanding the required conditions α<<ß and ß>>1, issues related to the validity and approximation accuracy of this approximate formula have remained largely ignored in practice, partly because these conditions are too general to provide clear guidance. Consequently, this study proposes a probability measure Pr(0 < r < 1 | αÌ, ßÌ) as a validity measure (r is a random variable that follows a gamma distribution; αÌ and ßÌ are the maximum likelihood estimates of α and ß in the approximate model); and the constraint conditions ßÌ>(22αÌ)0.50 for 0.02<αÌ<2 as a rule of thumb to ensure an accurate approximation (e.g., Pr(0 < r < 1 | αÌ, ßÌ) >0.99) . This validity measure and rule of thumb were validated by application to all the completed beta-Poisson models (related to 85 data sets) from the QMRA community portal (QMRA Wiki). The results showed that the higher the probability Pr(0 < r < 1 | αÌ, ßÌ), the better the approximation. The results further showed that, among the total 85 models examined, 68 models were identified as valid approximate model applications, which all had a near perfect match to the corresponding exact beta-Poisson model dose-response curve.
Assuntos
Infecções por Campylobacter/epidemiologia , Funções Verossimilhança , Distribuição de Poisson , Medição de Risco/métodos , Infecções por Campylobacter/microbiologia , Humanos , Modelos Estatísticos , Probabilidade , Microbiologia da ÁguaRESUMO
Quantitative microbial risk assessment (QMRA) is widely accepted for characterizing the microbial risks associated with food, water, and wastewater. Single-hit dose-response models are the most commonly used dose-response models in QMRA. Denoting PI(d) as the probability of infection at a given mean dose d, a three-parameter generalized QMRA beta-Poisson dose-response model, PI(d|α,ß,r*), is proposed in which the minimum number of organisms required for causing infection, Kmin , is not fixed, but a random variable following a geometric distribution with parameter 0Assuntos
Distribuição de Poisson
, Medição de Risco/métodos
, Algoritmos
, Animais
, Teorema de Bayes
, Infecções por Campylobacter/microbiologia
, Contaminação de Alimentos
, Microbiologia de Alimentos/métodos
, Voluntários Saudáveis
, Humanos
, Funções Verossimilhança
, Listeriose/microbiologia
, Camundongos
, Modelos Estatísticos
, Probabilidade
, Tamanho da Amostra
, Microbiologia da Água
RESUMO
There is a widespread need for the use of quantitative microbial risk assessment (QMRA) to determine reclaimed water quality for specific uses, however neither faecal indicator levels nor pathogen concentrations alone are adequate for assessing exposure health risk. The aim of this study was to build a conceptual model representing factors contributing to the microbiological health risks of reusing water treated in maturation ponds. This paper describes the development of an unparameterised model that provides a visual representation of theoretical constructs and variables of interest. Information was collected from the peer-reviewed literature and through consultation with experts from regulatory authorities and academic disciplines. In this paper we explore how, considering microbial risk as a modular system, following the QMRA framework enables incorporation of the many factors influencing human exposure and dose response, to better characterise likely human health impacts. By using and expanding upon the QMRA framework we deliver new insights into this important field of environmental exposures. We present a conceptual model of health risk of microbial exposure which can be used for maturation ponds and, more importantly, as a generic tool to assess health risk in diverse wastewater reuse scenarios.
Assuntos
Exposição Ambiental/efeitos adversos , Modelos Teóricos , Medição de Risco/métodos , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/microbiologia , Microbiologia da Água , Purificação da Água/normas , Humanos , Reciclagem/métodosRESUMO
BACKGROUND: Quantitative microbial risk assessment (QMRA) is the current method of choice for determining the risk to human health from exposure to microorganisms of concern. However, current approaches are often constrained by the availability of required data, and may not be able to incorporate the many varied factors that influence this risk. Systems models, based on Bayesian networks (BNs), are emerging as an effective complementary approach that overcomes these limitations. OBJECTIVES: This article aims to provide a comparative evaluation of the capabilities and challenges of current QMRA methods and BN models, and a scoping review of recent published articles that adopt the latter for microbial risk assessment. Pros and cons of systems approaches in this context are distilled and discussed. METHODS: A search of the peer-reviewed literature revealed 15 articles describing BNs used in the context of QMRAs for foodborne and waterborne pathogens. These studies were analysed in terms of their application, uses and benefits in QMRA. DISCUSSION: The applications were notable in their diversity. BNs were used to make predictions, for scenario assessment, risk minimisation, to reduce uncertainty and to separate uncertainty and variability. Most studies focused on a segment of the exposure pathway, indicating the broad potential for the method in other QMRA steps. BNs offer a number of useful features to enhance QMRA, including transparency, and the ability to deal with poor quality data and support causal reasoning. CONCLUSION: The method has significant untapped potential to describe the complex relationships between microbial environmental exposures and health.
Assuntos
Teorema de Bayes , Microbiologia de Alimentos , Modelos Teóricos , Saúde Pública/métodos , Microbiologia da Água/normas , Doenças Transmissíveis/epidemiologia , Doenças Transmissíveis/microbiologia , Microbiologia de Alimentos/normas , Microbiologia de Alimentos/estatística & dados numéricos , Humanos , Saúde Pública/estatística & dados numéricos , Medição de Risco/métodos , Medição de Risco/estatística & dados numéricos , IncertezaRESUMO
BACKGROUND: Despite accelerated global population declines due to targeted and illegal fishing pressure for many top-level shark species, the impacts of coastal habitat modification have been largely overlooked. We present the first direct comparison of the use of natural versus artificial habitats for the bull shark, Carcharhinus leucas, an IUCN 'Near-threatened' species--one of the few truly euryhaline sharks that utilises natural rivers and estuaries as nursery grounds before migrating offshore as adults. Understanding the value of alternate artificial coastal habitats to the lifecycle of the bull shark is crucial for determining the impact of coastal development on this threatened but potentially dangerous species. METHODOLOGY/FINDINGS: We used longline surveys and long-term passive acoustic tracking of neonate and juvenile bull sharks to determine the ontogenetic value of natural and artificial habitats to bull sharks associated with the Nerang River and adjoining canals on the Gold Coast, Australia. Long-term movements of tagged sharks suggested a preference for the natural river over artificial habitat (canals). Neonates and juveniles spent the majority of their time in the upper tidal reaches of the Nerang River and undertook excursions into adjoining canals. Larger bull sharks ranged further and frequented the canals closer to the river mouth. CONCLUSIONS/SIGNIFICANCE: Our work suggests with increased destruction of natural habitats, artificial coastal habitat may become increasingly important to large juvenile bull sharks with associated risk of attack on humans. In this system, neonate and juvenile bull sharks utilised the natural and artificial habitats, but the latter was not the preferred habitat of neonates. The upper reaches of tidal rivers, often under significant modification pressure, serve as nursery sites for neonates. Analogous studies are needed in similar systems elsewhere to assess the spatial and temporal generality of this research.