A novel organ-chip system emulates three-dimensional architecture of the human epithelia and the mechanical forces acting on it.

Successful translation of in vivo experimental data to human patients is an unmet need and a bottleneck in the development of effective therapeutics. Organ-on-Chip technology aims to address this need by leveraging recent significant advancements in microfabrication and biomaterials, which enable modeling of organs and their functionality. These microengineered chips offer researchers the possibility to recreate critical elements of native tissue architecture such as in vivo relevant tissue-tissue interface, air-liquid interface, and mechanical forces, including mechanical stretch and fluidic shear stress, which are crucial to recapitulate tissue level functions. Here, we present the development of a new, comprehensive 3D cell-culture system, where we combined our proprietary Organ-Chip technology with the advantages offered by three-dimensional organotypic culture. Leveraging microfabrication techniques, we engineered a flexible chip that consists of a chamber containing an organotypic epithelium, surrounded by two vacuum channels that can be actuated to stretch the hydrogel throughout its thickness. Furthermore, the ceiling of this chamber is a removable lid with a built-in microchannel that can be perfused with liquid or air and removed as needed for direct access to the tissue. The bottom part of this chamber is made from a porous flexible membrane which allows diffusive mass transport to and from the microfluidic channel positioned below the membrane. This additional microfluidic channel can be coated with endothelial cells to emulate a blood vessel and recapitulate endothelial interactions. Our results show that the Open-Top Chip design successfully addresses common challenges associated with the Organs-on-Chip technology, including the capability to incorporate a tissue-specific extracellular matrix gel seeded with primary stromal cells, to reproduce the architectural complexity of tissues by micropatterning the gel, and to extract the gel for H&E staining. We also provide proof-of-concept data on the feasibility of using the system with primary human skin and alveolar epithelial cells.

Continuous Formation of Ultrathin, Strong Collagen Sheets with Tunable Anisotropy and Compaction.

The multiscale organization of protein-based fibrillar materials is a hallmark of many organs, but the recapitulation of hierarchal structures down to fibrillar scales, which is a requirement for withstanding physiological loading forces, has been challenging. We present a microfluidic strategy for the continuous, large-scale formation of strong, handleable, free-standing, multicentimeter-wide collagen sheets of unprecedented thinness through the application of hydrodynamic focusing with the simultaneous imposition of strain. Sheets as thin as 1.9 µm displayed tensile strengths of 0.5-2.7 MPa, Young's moduli of 3-36 MPa, and modulated the diffusion of molecules as a function of collagen nanoscale structure. Smooth muscle cells cultured on engineered sheets oriented in the direction of aligned collagen fibrils and generated coordinated vasomotor responses. The described biofabrication approach enables rapid formation of ultrathin collagen sheets that withstand physiologically relevant loads for applications in tissue engineering and regenerative medicine, as well as in organ-on-chip and biohybrid devices.

Robotic fluidic coupling and interrogation of multiple vascularized organ chips.

Organ chips can recapitulate organ-level (patho)physiology, yet pharmacokinetic and pharmacodynamic analyses require multi-organ systems linked by vascular perfusion. Here, we describe an 'interrogator' that employs liquid-handling robotics, custom software and an integrated mobile microscope for the automated culture, perfusion, medium addition, fluidic linking, sample collection and in situ microscopy imaging of up to ten organ chips inside a standard tissue-culture incubator. The robotic interrogator maintained the viability and organ-specific functions of eight vascularized, two-channel organ chips (intestine, liver, kidney, heart, lung, skin, blood-brain barrier and brain) for 3 weeks in culture when intermittently fluidically coupled via a common blood substitute through their reservoirs of medium and endothelium-lined vascular channels. We used the robotic interrogator and a physiological multicompartmental reduced-order model of the experimental system to quantitatively predict the distribution of an inulin tracer perfused through the multi-organ human-body-on-chips. The automated culture system enables the imaging of cells in the organ chips and the repeated sampling of both the vascular and interstitial compartments without compromising fluidic coupling.

Handheld skin printer: in situ formation of planar biomaterials and tissues.

We present a handheld skin printer that enables the in situ formation of biomaterial and skin tissue sheets of different homogeneous and architected compositions. When manually positioned above a target surface, the compact instrument (weight <0.8 kg) conformally deposits a biomaterial or tissue sheet from a microfluidic cartridge. Consistent sheet formation is achieved by coordinating the flow rates at which bioink and cross-linker solution are delivered, with the speed at which a pair of rollers actively translate the cartridge along the surface. We demonstrate compatibility with dermal and epidermal cells embedded in ionically cross-linkable biomaterials (e.g., alginate), and enzymatically cross-linkable proteins (e.g., fibrin), as well as their mixtures with collagen type I and hyaluronic acid. Upon rapid crosslinking, biomaterial and skin cell-laden sheets of consistent thickness, width and composition were obtained. Sheets deposited onto horizontal, agarose-coated surfaces were used for physical and in vitro characterization. Proof-of-principle demonstrations for the in situ formation of biomaterial sheets in murine and porcine excisional wound models illustrate the capacity of depositing onto inclined and compliant wound surfaces that are subject to respiratory motion. We expect the presented work will enable the in situ delivery of a wide range of different cells, biomaterials, and tissue adhesives, as well as the in situ fabrication of spatially organized biomaterials, tissues, and biohybrid structures.

CMOS neurotransmitter microarray: 96-channel integrated potentiostat with on-die microsensors.

A 8 × 12 array of integrated potentiostats for on-CMOS neurotransmitter imaging is presented. Each potentiostat channel measures bidirectional redox currents proportional to the concentration of a neurochemical. By combining the current-to-frequency and the single-slope analog-to-digital converter (ADC) architectures a total linear dynamic range of 95 dB is achieved. A 3.8 mm × 3.1 mm prototype fabricated in a 0.35 µm standard CMOS technology was integrated with flat and 3D on-die gold microelectrodes and an on-chip microfluidic network. It is experimentally validated in in-situ recording of neurotransmitter dopamine.

Mosaic hydrogels: one-step formation of multiscale soft materials.

The one-step, continuous formation of mosaic hydrogel sheets is presented. A microfluidic device allows controllable incorporation of secondary biopolymers within a flowing biopolymer sheet followed by a cross-linking step that retains the microscale composition. Information is encoded; mosaic stiffness and diffusivity patterns are created; tessellations are populated with biomolecules, microparticles and viable primary cells; and 3D soft material assemblies are demonstrated.

Isomer- and enantioselective degradation and chiral stability of fenpropathrin and fenvalerate in soils.

Fenpropathrin and fenvalerate are two widely used pyrethroid insecticides. Due to one and two asymmetrical centers, fenpropathrin and fenvalerate consist of two and four stereoisomers, respectively. In the present study, the degradation of fenpropathrin and fenvalerate in two soils, an alkaline soil and an acidic soil, was investigated using enantioselective high-performance liquid chromatography (HPLC) and the following results were obtained. (i) Degradation of fenpropathrin and fenvalerate in alkaline soil was slightly enantioselective with S-fenpropathrin and alphaS,2R-fenvalerate being faster degraded, respectively. (ii) Fenpropathrin and fenvalerate were found configurationally unstable in alkaline soil and significant racemization at the chiral alpha-C position took place along with the degradation process. The racemization is chemically induced since it occurred under both nonsterilized and sterilized conditions. (iii) No racemization was observed in acidic soil. The soil pH dependent effect of the racemization was further validated by incubating S-fenpropathrin and alphaS,2R-fenvalerate in methanol-buffer solutions with different pH values. (iv) Fenvaleric acid was identified as the main metabolite of fenvalerate, formed by cleavage of the ester bond, during fenvalerate degradation in alkaline soil. Formation of fenvaleric acid in alkaline soil was slightly enantioselective, resulting in an enrichment of S-fenvaleric acid in the soil.