A Novel Bio-Adhesive Based on Chitosan-Polydopamine-Xanthan Gum for Glass, Cardboard and Textile Commodities.

The escalating environmental concerns associated with petroleum-based adhesives have spurred an urgent need for sustainable alternatives. Chitosan, a natural polysaccharide, is a promising candidate; however, its limited water resistance hinders broader application. The aim of this study is to develop a new chitosan-based adhesive with improved properties. The polydopamine association with chitosan presents a significant increase in adhesiveness compared to pure chitosan. Polydopamine is synthesized by the enzymatic action of laccase from Trametes versicolor at pH = 4.5, in the absence or presence of chitosan. This pH facilitates chitosan's solubility and the occurrence of catechol in its reduced form (pH < 5.5), thereby increasing the final adhesive properties. To further enhance the adhesive properties, various crosslinking agents were tested. A multi-technique approach was used for the characterization of formulations. The formulation based on 3% chitosan, 50% polydopamine, and 3% xanthan gum showed a spectacular increase in adhesive properties when tested on glass, cardboard and textile. This formulation increased water resistance, maintaining the adhesion of a sample soaked in water for up to 10 h. For cardboard and textile, material rapture occurred, in mechanical tests, prior to adhesive bond failure. Furthermore, all the samples showed antiflame properties, expanding the benefits of their use. Comparison with commercial glues confirms the remarkable adhesive properties of the new formulation.

Physiochemical Characterization of Lipidic Nanoformulations Encapsulating the Antifungal Drug Natamycin.

Natamycin is a tetraene polyene that exploits its antifungal properties by irreversibly binding components of fungal cell walls, blocking the growth of infections. However, topical ocular treatments with natamycin require frequent application due to the low ability of this molecule to permeate the ocular membrane. This limitation has limited the use of natamycin as an antimycotic drug, despite it being one of the most powerful known antimycotic agents. In this work, different lipidic nanoformulations consisting of transethosomes or lipid nanoparticles containing natamycin are proposed as carriers for optical topical administration. Size, stability and zeta potential were characterized via dynamic light scattering, the supramolecular structure was investigated via small- and wide-angle X-ray scattering and 1H-NMR, and the encapsulation efficiencies of the four proposed formulations were determined via HPLC-DAD.

Ferulated Poly(vinyl alcohol) based hydrogels.

New graft copolymers were prepared by reaction of poly (vinyl alcohol) (PVA) with mono-imidazolide or bis-imidazolide derivatives of ferulic acid (FA) with the formation of ester bonds. The obtained graft copolymers, thanks to the crosslinking capability of FA, formed in water strong gels as verified by rheological analyses. The resulting hydrogels were characterized to evaluate their applicability as wound dressing. In this perspective, their capability to absorb and retain a large amount of fluid without dissolving was verified by swelling kinetics and Moisture Vapour Transmission Rate measurements. Their stability towards mechanical solicitations was assessed by quantifying elasticity, compliance, stress-relaxation, and adhesivity properties. The analyses pointed out that hydrogel PVA-FA2-3 obtained by feruloylation of PVA with bis-imidazole derivative of ferulic acid using an acylation agent/polymer molar ratio 0.03/1 resulted the best candidate for the foreseen application.

Liposomal Encapsulation of Citicoline for Ocular Drug Delivery.

Glaucoma represents a group of neurodegenerative diseases characterized by optic nerve damage and the slowly progressive death of retinal ganglion cells. Glaucoma is considered the second leading cause of irreversible blindness worldwide. Pharmaceutical treatment of glaucoma is critical because of the properties of the ocular barrier that limit the penetration of drugs, resulting in lower systemic bioavailability. This behavior causes the need of frequent drug administration, which leads to deposition of concentrated solutions on the eye, causing toxic effects and cellular damage to the eye. To overcome these drawbacks, novel drug-delivery systems, such as liposomes, can play an important role in improving the therapeutic efficacy of antiglaucomatous drugs. In this work, liposomes were synthesized to improve various aspects, such as ocular barrier penetration, bioavailability, sustained release of the drug, targeting of the tissue, and reduction in intraocular pressure. Citicoline (CDP-choline; cytidine 5'-diphosphocholine) is an important intermediate in the biosynthesis of cell membrane phospholipids, with neuroprotective and neuroenhancement properties, and it was used in the treatment on retinal function and neural conduction in the visual pathways of glaucoma patients. In this study, citicoline was loaded into the 1,2-dioleoyl-sn-glycerol-3-phosphocholine and cholesterol liposomal carrier to enhance its therapeutic effect. The citicoline encapsulation efficiency, drug release, and size analysis of the different liposome systems were investigated using dynamic light scattering, nuclear magnetic resonance, infrared spectroscopy, and ToF-SIMS experiments.

Design and Optimization of Solid Lipid Nanoparticles Loaded with Triamcinolone Acetonide.

Principles of quality by design and design of experiments are acquiring more importance in the discovery and application of new drug carriers, such as solid lipid nanoparticles. In this work, an optimized synthesis of solid lipid nanoparticles loaded with Triamcinolone Acetonide is presented using an approach that involves Stearic Acid as a lipid, soy PC as an ionic surfactant, and Tween 80 as a nonionic surfactant. The constructed circumscribed Central Composite Design considers the lipid and nonionic surfactant quantities and the sonication amplitude in order to optimize particle size and Zeta potential, both measured by means of Dynamic Light Scattering, while the separation of unentrapped drug from the optimized Triamcinolone Acetonide-loaded solid lipid nanoparticles formulation is performed by Size Exclusion Chromatography and, subsequently, the encapsulation efficiency is determined by HPLC-DAD. The proposed optimized formulation-with the goal of maximizing Zeta potential and minimizing particle size-has shown good accordance with predicted values of Zeta potential and dimensions, as well as a high value of encapsulated Triamcinolone Acetonide. Experimental values obtained from the optimized synthesis reports a dimension of 683 ± 5 nm, which differs by 3% from the predicted value, and a Zeta potential of -38.0 ± 7.6 mV (12% difference from the predicted value).

Functionalized Hyaluronic Acid for "In Situ" Matrix Metalloproteinase Inhibition: A Bioactive Material to Treat the Dry Eye Sydrome.

Hyaluronic acid (HA) is a naturally occurring polysaccharide with many molecular functions, including maintaining the structure and physiology of the tissues, tissue remodeling, and inflammation. HA is found naturally in physiological tear fluid, possesses excellent mucus-layer-adhesive properties, and is successfully employed in the treatment of dry eye syndrome (DES). However, HA has as major drawback: its rapid in vivo degradation by hyaluronidase. We report on a unique material, namely, HA-3, obtained by the functionalization of HA with the metalloproteinase inhibitor 3 (MMPI). This material is characterized by an increased resistance to hyaluronidase degradation, associated with MMP inhibition properties. The ability of HA-3 to prevent dehydration of human corneal epithelial cells in vitro and in vivo may accelerate the development of more efficient DES treatment and broaden the application of HA in human diseases.

Characterization of Extracts of Coffee Leaves (Coffea arabica L.) by Spectroscopic and Chromatographic/Spectrometric Techniques.

Coffea arabica L. leaves represent a viable alternative to the canonical matrices used for preparation of beverages, such as tea leaves and grounded coffee beans. Coffee leaves infusions are rich in antioxidant phenolic compounds and have a lower concentration of caffeine. Due to increasing interest in this field, a complete study of the bioactive compounds as chlorogenic acids, xanthones and alkaloids is noteworthy. C. arabica leaves were subjected to ultrasound-assisted extraction, and the extracts were studied via nuclear magnetic resonance spectroscopy (NMR) and chromatographic techniques coupled with mass spectrometry (HPLC-MSn) to identify and quantify the secondary metabolites profile through an untargeted data dependent approach. A quantitative analysis was performed for the major components-chlorogenic acids, mangiferin, caffeine and trigonelline-via HPLC-MS in Single Ion Monitoring (SIM) mode. In total, 39 compounds were identified. The presence of these bioactive compounds proved the strong potential of C. arabica leaves as functional food and as an alternative to classic infused beverages.

Effect of Flaking and Precooking Procedures on Antioxidant Potential of Selected Ancient Cereal and Legume Flours.

Consumption of cereals (and particularly ancient cereals) is considered the base of a healthy diet, and all current dietary guidelines have cereals at the bottom of the nutrition pyramid. Together with cereals, legumes are an excellent source of nutrients and nutraceuticals. The effects of agroindustrial pretreatments (flaking and precooking processes) on the antioxidant potential of flours from ancient cereals and legumes were studied. The extraction of free hydrophilic phenolic compounds was carried out in a hydroalcoholic solvent mixture via an ultrasound-assisted process. Furthermore, the solid residue was successively hydrolyzed by an alkaline solution to extract the bound phenolic fraction. Both free and bound extracted fractions were then quantitatively characterized for total polyphenolic and flavonoid contents, and the antioxidant potential was determined by carrying out the ABTS and DPPH radical scavenging assays, expressing the results (in both cases) as the Trolox equivalent antioxidant capacity (TEAC/ABTS and TEAC/DPPH, respectively). The samples were also extracted in organic apolar solvents (acetone or water-saturated iso-butanol) to quantitatively characterize lipophilic antioxidant compounds and pigments. A discussion on the comparison of these analytical parameters of flours obtained from raw, flaked, and precooked cereals and legumes is reported revealing that (i) phenolic compounds are mainly present in the post-hydrolysis extract (bound fraction), (ii) the precooking process significantly reduced the concentration of antioxidants, (iii) the flaking process slightly increased the phenolic content, (iv) legumes were less influenced by pretreatments, suggesting the possibility of using legumes to enrich cereal foods.

Click-Chemistry Cross-Linking of Hyaluronan Graft Copolymers.

An easy and viable crosslinking procedure by click-chemistry (click-crosslinking) of hyaluronic acid (HA) was developed. In particular, the clickable propargyl groups of hyaluronane-based HA-FA-Pg graft copolymers showing low and medium molecular weight values were exploited in crosslinking by click-chemistry by using a hexa(ethylene glycol) spacer. The resulting HA-FA-HEG-CL materials showed an apparent lack of in vitro cytotoxic effects, tuneable water affinity, and rheological properties according to the crosslinking degree that suggests their applicability in different biomedical fields.

Determination of nano and microplastic particles in hypersaline lakes by multiple methods.

Microplastics and nanoplastics have a range of impacts on the aquatic environment and present major challenges to their mitigation and management. Their transport and fate depend on their composition, form, and the characteristics of the receiving environment. We explore the spatial and temporal dynamics of plastic particles in the world's second-largest hypersaline lake, combining information from microscopic, thermal gravimetric, and fractional methods. Studies on microplastic and nanoplastic pollution in these important environments are scarce, and there is limited understanding of their dynamics and fate. Our results for Urmia Lake (Iran) in 2016 and 2019 show a discrepancy in the composition and quantity of microplastics measured in river tributaries to the lake and the lake itself, suggesting an active microplastic sink. Potential sink mechanisms in hypersaline lakes are explored. The present study indicates that microplastics have different transport mechanisms and fate in these extreme environments, compared to lake and ocean environments.

Sodium hyaluronate-g-2-((N-(6-aminohexyl)-4-methoxyphenyl)sulfonamido)-N-hydroxyacetamide with enhanced affinity towards MMP12 catalytic domain to be used as visco-supplement with increased degradation resistance.

The present paper describes the functionalization of sodium hyaluronate (NaHA) with a small molecule (2-((N-(6-aminohexyl)-4-methoxyphenyl)sulfonamido)-N-hydroxyacetamide) (MMPI) having proven inhibitory activity against membrane metalloproteins involved in inflammatory processes (i.e. MMP12). The obtained derivative (HA-MMPI) demonstrated an increased resistance to the in-vitro degradation by hyaluronidase, viscoelastic properties close to those of healthy human synovial fluid, cytocompatibility towards human chondrocytes and nanomolar affinity towards MMP 12. Thus, HA-MMPI can be considered a good candidate as viscosupplement in the treatment of knee osteoarticular disease.

Water content quantification by FTIR in carboxymethyl cellulose food additive.

Water content quantification of raw polysaccharide materials for food processing is generally performed by gravimetric analysis or titrimetric methods, which are time- and energy-consuming, non-eco-friendly and sample destructive. The present study develops and validates a new approach, based on the use of Fourier transform infrared (FTIR) spectroscopy, resulting in a model of the water content of carboxymethyl cellulose (CMC) polysaccharides. Samples of CMC were exposed to different relative humidity conditions. Water content was determined by standard gravimetric methods (OIV-Oeno 404-2010) and compared with the area of FTIR absorption in the range 3675-2980 cm-1, attributed to the stretching of OH groups. The strong correlation between gravimetric results and FTIR area (R2 = 0.88) showed no signs of bias across the water content range. A cross-validation technique to predict the water content by band area was assessed obtaining a general equation: y = 2.12 x + 2.80 with a high repetitively and good prediction of the tested models.

Varietal and Geographical Origin Characterization of Peaches and Nectarines by Combining Analytical Techniques and Statistical Approach.

Prunus persica L. is one of the most important fruit crops in European production, after grapes, apples, oranges and watermelons. Most varieties are rich in secondary metabolites, showing antioxidant properties for human health. The purpose of this study was to develop a chemical analysis methodology, which involves the use of different analytical-instrumental techniques to deepen the knowledge related to the profile of metabolites present in selected cultivars of peaches and nectarines cultivated in the Mediterranean area (Southern Italy). The comparative study was conducted by choosing yellow-fleshed peaches (RomeStar, ZeeLady) and yellow-fleshed nectarines (Nectaross, Venus) from two geographical areas (Piana di Sibari and Piana di Metaponto), and by determining the chemical parameters for the flesh and skin that allow for identification of any distinctive varietal and/or geographical characteristics. A combined analytical and chemometric approach was used, trough rheological, thermogravimetric (TGA), chromatographic (HPLC-ESI-MS), spectroscopic (UV-Vis, ATR-FTIR, NMR) and spectrometric (ToF-SIMS) analysis. This approach allowed us to identify the characterizing parameters for the analysis of a plant matrix so that the developed methodology could define an easily exportable and extendable model for the characterization of other types of vegetable matrices.

Solid Lipid Nanoparticles Produced via a Coacervation Method as Promising Carriers for Controlled Release of Quercetin.

Quercetin is a poorly water-soluble flavonoid with many benefits to human health. Besides the natural food resources that may provide Quercetin, the interest in delivery systems that could enhance its bioavailability in the human body has seen growth in recent years. Promising delivery system candidates are represented by Solid Lipid Nanoparticles (SLNs) which are composed of well-tolerated compounds and provide a relatively high encapsulation efficiency and suitable controlled release. In this study, Quercetin-loaded and negatively charged Solid Lipid Nanoparticles were synthesized based on a coacervation method, using stearic acid as a core lipid and Arabic Gum as a stabilizer. Samples were qualitatively characterized by Dynamic light scattering (DLS), Zeta Potential, Surface infrared spectroscopy (FTIR-ATR), and Time of flight secondary ion mass spectrometry (ToF-SIMS). Encapsulation efficiency, drug release, and antioxidant effect against ABTS•+ were evaluated in vitro by UV-VIS spectrophotometry.

Combined Experimental and Multivariate Model Approaches for Glycoalkaloid Quantification in Tomatoes.

The intake of tomato glycoalkaloids can exert beneficial effects on human health. For this reason, methods for a rapid quantification of these compounds are required. Most of the methods for α-tomatine and dehydrotomatine quantification are based on chromatographic techniques. However, these techniques require complex and time-consuming sample pre-treatments. In this work, HPLC-ESI-QqQ-MS/MS was used as reference method. Subsequently, multiple linear regression (MLR) and partial least squares regression (PLSR) were employed to create two calibration models for the prediction of the tomatine content from thermogravimetric (TGA) and attenuated total reflectance (ATR) infrared spectroscopy (IR) analyses. These two fast techniques were proven to be suitable and effective in alkaloid quantification (R2 = 0.998 and 0.840, respectively), achieving low errors (0.11 and 0.27%, respectively) with the reference technique.

Phosphorylated xanthan gum-Ag(I) complex as antibacterial viscosity enhancer for eye drops formulation.

Topical instillation of eye drops represents the treatment of choice for many ocular diseases. Ophthalmic formulations must meet general requirements, i.e. pH, osmolality, transparency and viscosity to ensure adequate retention without inducing irritation and the development of eye infections. We developed a phosphorylated xanthan gum-Ag(I) complex (XGP-Ag) showing pH (pH = 7.1 ± 0.3) and osmolality values (311 ± 2 mOsm/kg) close to that of human tears (pH = 6.5-7.6 and 304 ± 23 mOsm/kg) thanks to the presence of phosphate moieties along the chain. The presence of phosphate groups covalently bound to the XG chains avoids their dispersion in fluid, thus reducing the risk of corneal calcification. 0.02% w/v XGP-Ag solution showed high transparency (higher than 95% along the entire visible range), adequate refractive index (1.334 ± 0.001) and viscosity in the range: γ 1 s-1-10,000 s- 1 (26.4 ± 0.8-2.1 ± 0.4 mPa·s). Its cytotoxicity and capability to hinder bacterial proliferation was also verified.

Kinetics of glucosinolate hydrolysis by myrosinase in Brassicaceae tissues: A high-performance liquid chromatography approach.

Glucosinolates are a group of secondary metabolites occurring in all the vegetables belonging to the Brassicaceae family. Upon tissue damage, glucosinolates are hydrolyzed by myrosinase to a series of degradation products, including isothiocyanates, which are important for their health-promoting effects in humans. The glucosinolate-myrosinase system has been characterized in several Brassica species, of which white mustard (Sinapis alba) has been studied the most. In this study, a new HPLC-UV assay to evaluate the activities and kinetics of myrosinases in aqueous extracts, which closely represent the physiological conditions of plant tissues, was developed. This method was tested on myrosinases extracted from broccoli and cauliflower inflorescences, employing sinigrin and glucoraphanin as substrates. The results showed a strong inhibition of both enzymes at high substrate concentrations. The main issues related to kinetic analysis on the glucosinolate-myrosinase system were also elucidated.

Covalent hyaluronic-based coating of magnetite nanoparticles: Preparation, physicochemical and biological characterization.

In this paper we report about the preparation, physicochemical and biological characterization of a magneto responsive nanostructured material based on magnetite nanoparticles (NP) coated with hyaluronic acid (HA). A synthetic approach, based on a Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition "click" reaction between azido-functionalized magnetite NP and a derivative of hyaluronic acid bearing propargylated ferulic acid groups (HA-FA-Pg), was developed to link covalently the polymer layer to the magnetite NP. The functionalization steps of the magnetite NP and their coating with the HA-FA-Pg layer were monitored by Fourier Transform Infrared (FTIR) spectroscopy and Thermal Gravimetric Analysis (TGA) while Dynamic Light Scattering (DLS) and ζ-potential measurements were performed to characterize the aqueous dispersions of the HA-coated magnetite NP. Aggregation and sedimentation processes were investigated also by UV-visible spectroscopy and the dispersions of HA-coated magnetite NP were found significantly more stable than those of bare NP. Magnetization and zero field cooled/field cooled curves revealed that both bare and HA-coated magnetite NP are superparamagnetic at room temperature. Moreover, cytotoxicity studies showed that the coating with HA-FA-Pg significantly reduces the cytotoxicity of the magnetite NP providing the rational basis for the application of the HA-coated magnetite NP as healthcare material.

Enriched Gellan Gum hydrogel as visco-supplement.

Viscosupplementation, i.e. intra-articular injection of hyaluronic acid derivatives, is considered as the most effective treatment for patients with mild to moderate osteoarthritis. Even if hyaluronic acid is still considered as the gold standard, research is now focusing on the development of new products with enhanced injectability and yet reasonable viscoelastic behavior for OA treatment. A Gellan Gum (GG) hydrogel was synthesized and coated with crosslinked polyvinyl alcohol (PVA) to protect the polysaccharide from degradation during sterilization and improve its performance for the foreseen application. Thermal analyses indicated that mixed hydrogel showed a higher degree of structuring than the bare polysaccharide core without losing its swelling properties, thanks to the hydrophylicity of both coating and cross-linking agent. The PVA coating increased elastic and viscous moduli of the polysaccharide core conferring it a higher resistance to shear and compression and better thixotropic properties. Despite the double crosslinking, hydrogel was injectable. Cytocompatibility towards chondrocytes was verified.

Hyaluronan Graft Copolymers Bearing Fatty-Acid Residues as Self-Assembling Nanoparticles for Olanzapine Delivery.

In order to evaluate the potential of a technology platform based on hyaluronan copolymers grafted with propargylated ferulate fluorophores (HA-FA-Pg) in the development of drug delivery systems, the propargyl groups of HA-FA-Pg derivatives were employed with oleic acid (OA) or stearic acid (SA) residues across a biocompatible hexa(ethylene glycol) (HEG) spacer. The designed materials (i.e., HA-FA-HEG-OA or HA-FA-HEG-SA) showed clear-cut aggregation features in an aqueous environment, as confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM), generating nanoaggregate systems. In fact, HA-FA-HEG-OA and HA-FA-HEG-SA derivatives showed the property to create self-assembled cytocompatible nanostructured aggregates in water, thanks to the simultaneous presence of hydrophilic portions in the polymeric backbone, such as hyaluronic acid, and hydrophobic portions in the side chains. Furthermore, the designed materials interact with living cells showing a high degree of cytocompatibility. The potential ability of nanosystems to load pharmacologically active molecules was assessed by the physical entrapment of olanzapine into both polymeric systems. The drug loading evaluation demonstrated that the nanoparticles are able to incorporate a good quantity of olanzapine, as well as improve drug solubility, release profile, and cytocompatibility.