Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes.

This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients.

BACKGROUND: The present study aimed to assess the frequency and variation of 13 nonmetric dental crown traits (NDCT) in permanent and primary molars in German orthodontic patients. METHODS: Dental records from orthodontic patients were screened and evaluated. First and second permanent and primary upper and lower molars (from left and right sides) were assessed. Teeth with cavitated dental caries, occlusal wear, restorations and obvious dental deformities were not evaluated. The NDCT for permanent molars were identified and scored according to the odontoscopic system developed by Arizona State University Dental Anthropology System (ASUDAS). The NDCT for primary molars were identified and scored according to ASUDAS, Hanihara's method and Sciulli's method. The χ2 test was used to investigate side preference and sexual dimorphism at a significance level of p ≤ 0.050. RESULTS: A total of 163 orthodontic patients (82 males and 81 females) aged 8-14 years were included. A sexual dimorphism was observed for the hypocone in first upper permanent molar (p = 0.041). The protostylid was observed in lower permanent molars (range 2.1-10%). Males presented more hypoconulid than females (p = 0.019). Only females presented the distal trigonid crest in lower first permanent molars (p = 0.002). The most common groove pattern in primary molars was Y; male presented more Y grade than females in the lower second primary molar (p = 0.039). Asymmetry was observed in some traits, ranging from 0 to 100%. CONCLUSION: The present study showed the frequency of NDCT of molars in German orthodontic patients and demonstrated that some traits present sexual dimorphism.

Er,Cr:YSGG and 980nm diode lasers influence dentin surface volume after cariogenic challenge: in vitro study.

This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.25 W; 5.0 Hz; 4.46 J/cm2 without water and 55% air. Furthermore, the 980-nm diode laser parameters were 2.0 W; 2.0 Hz; 21.41 J/cm2. The samples from each group were subjected to pH cycling. A confocal laser scanning microscope was used to evaluate SR and VL. Difference between the volume of the reference and treated areas + DES/RE was used to determine SR and VL. The mean values of the different groups were subjected to analysis of variance and Tukey's post-hoc test. The VL values were analyzed using the Kruskal-Wallis and Dunn post-hoc test (p < 0.05). The SR of the reference area did not show a statistically significant 1807-3107-bor-38-e025treatment and cariogenic challenge (p > 0.05). Moreover, VL in the FV + Di and FV + Er groups showed a statistically significant difference compared with areas submitted to different types of treatment and cariogenic challenge (p > 0.05). Er,Cr:YSGG and 980-nm diode lasers associated with fluoride varnishes decreased dentin VL in bovine teeth submitted to cariogenic challenge.

Is There Variation in the Morphology of the Frontal Sinus in Individuals with Different Craniofacial Patterns? A Systematic Review with Meta-Analysis.

To evaluate differences in the morphology of the frontal sinus in adolescents and adults with different craniofacial patterns, searches up to April 2024 were conducted in six databases and other information sources to identify observational studies. Study selection, data extraction, and quality assessment using the NOS scale were performed independently by two reviewers. Random effects meta-analyses were conducted to estimate the difference in frontal sinus measurements between different craniofacial skeletal patterns (α = 0.05). The certainty of the evidence was evaluated according to GRADE. Fourteen studies were included in the review. All studies had methodological limitations that affected their quality. The syntheses showed that skeletal Class II subjects presented a significantly smaller width of the frontal sinus than skeletal Class I subjects (MD = 0.56; 95% CI: 0.38, 0.74; p < 0.0001; I2 = 3%). Skeletal Class III subjects showed a frontal sinus width (MD = -0.91; 95% CI: -1.35, -0.47; p < 0.0001; I2 = 36%) and area (MD = -28.13; 95% CI: -49.03, -7.23; p = 0.0084; I2 = 66%) significantly larger than those of the skeletal Class I subjects. The available evidence suggests a positive relationship between mandibular and frontal sinus size. There is limited evidence to make reliable estimates of the association of other craniofacial patterns and frontal sinus characteristics. These reported results are not conclusive and should be evaluated carefully due to the very low certainty of the evidence. The current evidence is scarce and consists of studies with methodological limitations; the results of the studies are often inconsistent, and the pooled estimates are imprecise. New high-quality research is still necessary.

Influence of Er:YAG and ND:YAG laser irradiation and fluoride application on surface roughness and dentin surface wear after erosive challenge - An in vitro study.

Background: To evaluate the effectiveness of Er:YAG and Nd:YAG laser on dentin hypersensitivity prevention, associated or not to acidulated phosphate fluoride (APF) after erosive challenge. Material and Methods: 104 specimens were obtained from bovine dentine and divided into groups (n=13): G1: Er:YAG; G2: Er:YAG followed by application of APF; G3: application of APF followed by Er:YAG, simultaneously; G4: Nd:YAG; G5: Nd:YAG followed by application of APF; G6: application of APF followed by Nd:YAG, simultaneously; G7:application of APF; G8: untreated. The parameters for Er:YAG were:10s, distance of 4mm, water cooling flow of 2mL/min, 2Hz, 3.92J/cm2. For the Nd:YAG: 10s, distance of 1mm, without cooling, 10Hz, 70.7J/cm2. The erosive drink was a cola at 4°C, 3×/day for 1 minute, for 5 days. Roughness and wear analysis were done in confocal laser microscope. Data were statistically analyzed (α=0.05). Results: As regards roughness, there was no statistically difference among the groups. The groups irradiated with Er:YAG had a volume loss lower. G6 showed higher values than the groups irradiated with Er:YAG and lower than the other groups. The other groups irradiated with Nd:YAG showed similar wear results to the control. Conclusions: The Er:YAG laser showed the lowest volume loss from wear analysis, suggesting the increased the acid resistance of dentin. Key words:Dentine sensitivity, Lasers, Sodium fluoride.

Influence of preventive remineralizing techniques on surface roughness and volume loss of dentin submitted to erosive and/or abrasive challenges.

Background: The objective this study was to evaluate the influence of preventive remineralizing techniques on surface roughness and volume loss of dentin submitted to erosive and/or abrasive challenges. Material and Methods: One hundred and eighty specimens of bovine root dentin were made; half of each was isolated (without treatment - WT) and half was subjected to the following remineralizing techniques: fluoride varnish (FV); Regenerate Boosting Serum® (RBS); Er,Cr:YSGG laser (L); fluoride varnish+laser (FV+L); Regenerate Boosting Serum®+laser (RBS+L). The specimens were submitted to erosive, abrasive and erosive followed by abrasive challenge. Erosion was carried out for 5 minutes, twice a day for 10 days. Abrasion was performed with an electric toothbrush and slurry solution for 60 seconds. The evaluation was performed by confocal laser scanning microscopy. Analysis of variance and Tukey tests were used for surface roughness; volume loss comparison was performed using the Kruskal-Wallis test and Dunn's post-hoc (p<0.05). Results: There was no statistically significant difference in the surface roughness of the reference area in relation to the areas submitted to different types of treatment and challenges (p>0.05). Regarding volume loss, the untreated group submitted to erosive/abrasive challenges showed greater percentage of volume loss compared to the other groups (p<0.05). Conclusions: It is concluded that preventive remineralizing techniques are effective in maintaining dentin volume after erosive/abrasive challenges. Key words:YSGG lasers, Dentin, Erosion, Tooth Abrasion.

Exploring the association between PITX2, third molars agenesis and sella turcica morphology : PITX2, third molars agenesis and sella turcica morphology.

OBJECTIVES: PITX2 is required for mammalian development and single nucleotide polymorphisms (SNPs) in this gene could be involved in dental agenesis and sella turcica patterns. Thus, the present study evaluated the association between SNPs in PITX2, third molars agenesis and sella turcica phenotypes. MATERIALS AND METHODS: The sample consisted of healthy orthodontic German patients with lateral cephalometric radiographs with clearly visualization of the sella turcica, and dental orthopantomograms. The morphological variations of the sella turcica were evaluated using the lateral cephalograms, while third molar agenesis was evaluated using orthopantomograms. DNA isolated from buccal cells was used for genotyping three SNPs in PITX2 (rs3796902, rs1947187, and rs2595110). The analyzes were performed using a significance of 5%. There was no association between third molar agenesis and sella turcica phenotypes (p > 0.05). SNPs in PITX2 were also not associated with third molars agenesis (p > 0.05). RESULTS: SNPs in PITX2 were associated with sella turcica phenotypes. The rs3796902 was associated with hypertrophic posterior clinoid process (p = 0.013). The rs1947187 and rs2595110 were associated with sella turcica bridge type A (p = 0.013 and p = 0.011, respectively for genotype distribution). Patients that carry the genotypes GG-CC-AG (rs3796902- rs1947187- rs2595110) had 7.2 higher chance to present sella turcica bridge type A (p = 0.002; Odds ratio = 7.2, Confidence interval 95% 2.04-27.04). CONCLUSIONS: Third molar agenesis was not associated with SNPs in PITX2 and sella turcica phenotypes. SNPs in PITX2 may have an important role in sella turcica pattern.

Estrogen deficiency influences SEC23A gene expression in the odontogenic region of incisors ­ a murine model study / A deficiência de estrógeno influencia a expressão gênica de SEC23A na região odontogênica de incisivos ­ um estudo em modelo murino

Recent scientific evidence suggests a close relationship between estrogen deficiency and vitamin D- related genes. Estrogen and vitamin D were involved with alterations in odontogenesis and tooth eruption process. Objective: The aim of the present study was to evaluate the influence of estrogen deficiency on the expression of genes related to the activation and degradation of vitamin D in the odontogenic region of incisors in a murine model. Material and Methods: This is an experimental clinical study that used female Wistar Hannover rats. The animals were randomly divided into two groups according to the intervention received: Hypoestrogenism Group ­ animals submitted to estrogen deficiency by ovariectomy surgery and Control Group ­ animals submitted to sham surgery. Surgical intervention was performed in the prepubertal period; the animals were followed throughout the pubertal period. After euthanasia, the hemimandibles were removed to evaluate the mRNA expression of the vitamin D-related genes AMDHD1, CYP24A1, NADSYN1 and SEC23A in the odontogenic region of incisors through real time PCR. Student's t test was used to compare means. Kruskal-Wallis test and Dunn's posttest were also used. The level of significance was 5%. Results: SEC23A was overexpressed in the estrogen deficiency condition in the odontogenic region (p=0.021). Conclusion: Estrogen deficiency may influence the expression of the SEC23A gene involved in the activation and degradation of vitamin D in the odontogenic region of incisors in a murine model(AU)

Evidências científicas recentes sugerem uma estreita relação entre a deficiência de estrógeno e os genes relacionados à vitamina D. O estrógeno e a vitamina D estão envolvidos com alterações na odontogênese e no processo de erupção dentária. Objetivo: O objetivo do presente estudo foi avaliar a influência da deficiência de estrógeno na expressão de genes relacionados à ativação e degradação da vitamina D na região odontogênica de incisivos em modelo murino. Material e Métodos: Trata-se de um estudo clínico experimental que utilizou ratas Wistar Hannover fêmeas. Os animais foram divididos aleatoriamente em dois grupos de acordo com a intervenção recebida: Grupo Hipoestrogenismo ­ animais submetidos à deficiência de estrógeno pela cirurgia de ovariectomia e Grupo Controle ­ animais submetidos à cirurgia simulada. A intervenção cirúrgica foi realizada no período pré-púbere; os animais foram acompanhados durante todo o período puberal. Após a eutanásia, as hemimandíbulas foram removidas para avaliar a expressão de mRNA dos genes AMDHD1, CYP24A1, NADSYN1 e SEC23A, relacionados à vitamina D, na região odontogênica de incisivos por meio de PCR em tempo real. O teste t de Student foi utilizado para comparar as médias. Também foram utilizados o teste de Kruskal-Wallis e o pós-teste de Dunn. O nível de significância foi de 5%. Resultados: SEC23A foi superexpresso na condição de deficiência de estrógeno na região odontogênica (p=0,021). Conclusão: A deficiência de estrógeno pode influenciar a expressão do gene SEC23A envolvido na ativação e degradação da vitamina D na região odontogênica de incisivos em modelo murino (AU)

Prevalence and local causes for retention of primary teeth and the associated delayed permanent tooth eruption.

BACKGROUND: This study aimed to evaluate the prevalence of retained primary teeth (RPT) associated with delayed permanent tooth eruption and the factors associated with this condition in German children. METHODS: This is a cross-sectional retrospective study that evaluated panoramic radiographs from orthodontic patients. The diagnosis of RPT was established according to Nolla developmental stage. The primary tooth was considered retained when its successor permanent tooth was in Nolla stage 8, 9, or 10. Statistical analysis was performed with an α of 5% (p < 0.05). RESULTS: A total of 102 children (48 girls and 54 boys), and 574 primary teeth and their respective permanent successor teeth were evaluated. We classified 192 teeth as RPT. Sixty-one (59.8%) children presented one or more RPT. Gender was not significantly different between RPT and control teeth (p = 0.838; odds ratio 0.95, confidence interval 95% 0.44-2.16). In the majority of the RPT cases (68.7%), no clear cause to explain the prolonged retention was identified. The pathological problems most commonly observed with RPT were dental fillings (19.3%), followed by dental caries (4.6%), and ectopic tooth eruption (2.1%). CONCLUSIONS: The incidence of RPT associated with delayed permanent tooth eruption in German children was high and the most common pathological condition associated with RPT was dental caries.

Association between craniofacial patterns and third molar agenesis in orthodontic patients.

PURPOSE: Third molar agenesis (TMA) is the most common craniofacial anomaly and has been associated with craniofacial patterns in different populations. Therefore, the aim of this retrospective cross-sectional study was to assess a possible association between craniofacial patterns and TMA in German orthodontic patients. METHODS: Patients undergoing orthodontic treatment with dental records including anamnesis, pretreatment lateral cephalograms and orthopantomograms were evaluated. Cephalometric analyses were conducted digitally and lines, angles and proportions were measured to investigate craniofacial morphology. Skeletal classes were determined by the individualised Wits appraisal and ANB angle. The TMA was identified with the help of orthopantomograms. Patients showing agenesis of at least one third molar were included in the TMA group. Statistical analysis was performed to assess the association between TMA and craniofacial patterns (α of p ≤ 0.05). RESULTS: A total of 148 patients were included, 40 (27.0%) presented at least one missing tooth (TMA group) and 108 (73.0%) showed full dentition (control group). Skeletal class determined by the individualised Wits appraisal revealed statistical significance between the TMA and control groups (p = 0.022), in which TMA patients were 11 times more likely to present with an individualised skeletal class III (odds ratio 11.3, 95% confidence interval 1.7-139.5). Skeletal cephalometric analysis revealed no statistical differences between TMA and control groups for any further angular, linear and proportional parameters. CONCLUSION: Third molar agenesis was associated with skeletal class III determined by the individualised Wits appraisal.

Effect of the Case for Carpule as a Visual Passive Distraction Tool on Dental Fear and Anxiety: A Pilot Study.

The present cross-over study aimed to evaluate the effect of a visual passive distraction tool, a case for carpule, in the management of fear and anxiety during invasive dental treatment. Children between the ages of 4 and 8 years that need at least two treatments with inferior alveolar nerve block were selected. All the included children received two treatments at different moments: in one treatment, local anesthesia was performed with a visual passive distraction tool, the crocodile case, for carpule (experimental); in the other treatment, local anesthesia was performed without the device (control). An evaluation of the anxiety levels was performed by measuring the heart rate and salivary cortisol levels. Wilcoxon's nonparametric test was used for a data analysis (p < 0.05). The mean heart rate with the visual passive distraction device fell from 81.8 to 78.1, while the control rose from 91.4 to 100 (p < 0.05). The mean salivary cortisol levels with the visual passive distraction device fell from 2.0 to 1.6, while in the control, they rose from 2.1 to 2.4 (p < 0.05). In conclusion, the crocodile case for carpule as a visual passive distraction device contributed positively to the management of fear and anxiety during inferior alveolar nerve block in children.

Estrogen deficiency influences TNF-α and IL-1ß gene expression in the odontogenic region of dental hypofunctional condition / A deficiência de estrógeno influencia a expressão gênica de TNF-α e IL-1ß na região odontogênica de dentes em hipofunção

Objetivo: Evidências científicas sugerem que a deficiência de estrógeno e fatores genéticos influenciam o desenvolvimento do sistema estomatognático. Este estudo teve como objetivo avaliar a influência da deficiência de estrógeno na expressão gênica de TNF-α, IL-1ß, IL-6 e IL-10 durante o desenvolvimento dentário em modelo murino. Material e Métodos: Ratas Wistar Hannover foram divididas em dois grupos de acordo com a intervenção recebida: Grupo Hipoestrogenismo - cirurgia de ovariectomia e Grupo Controle - cirurgia fictícia. Para avaliar o desenvolvimento dentário, o incisivo inferior foi escolhido. O modelo de hipofunção dos incisivos inferiores foi realizado por ajuste incisal. O incisivo homólogo exercia hiperfunção dentária. Os animais foram avaliados durante todo o período puberal. Após a eutanásia, as hemimandíbulas foram removidas para avaliar a expressão gênica do TNF-α, IL-1ß, IL-6 e IL-10 na região odontogênica dos incisivos por meio de PCR em tempo real. Foi realizado o teste de Kruskal-Wallis e o pós-teste de Dunn. O nível de significância foi de 5%. Resultados: Houve diferenças estatisticamente significativas na expressão gênica de TNF-α e IL-1ß entre os grupos hipoestrogenismo e controle sob condição de hipofunção dentária (p=0,0084, p=0,0072, respectivamente). Conclusão: A deficiência de estrógeno influencia a expressão gênica de TNF-α e IL-1ß na região odontogênica de dentes hipofuncionais (AU)

Objective: Scientific evidence suggests that estrogen deficiency and genetic factors have an influence on the development of the stomatognathic system. This study aimed to evaluate the influence of estrogen deficiency on the gene expression of TNF-α, IL-1ß, IL-6 and IL-10 during dental development in a murine model. Material and Methods: Wistar Hannover rats were divided into two groups according to the intervention received: Hypoestrogenism Group - ovariectomy surgery and Control Group - fictitious surgery. To evaluate the dental development, the lower incisor was chosen. The mandibular incisor hypofunction model was performed by incisal adjustment. The homologous incisor exerted a hyperfunction. The animals were evaluated throughout the pubertal period. After euthanasia, the hemimandibles were removed to evaluate the gene expression of the TNF-α, IL-1ß, IL-6 and IL-10 in the odontogenic region of the incisors through real time PCR. Kruskal-Wallis test and Dunn's posttest were performed. The level of significance was 5%. Results: There were statistically significant differences of TNF-α and IL-1ß gene expression between the hypoestrogenism and control groups under hypofunction condition (p=0.0084, p=0.0072, respectively). Conclusion: Estrogen deficiency influences TNF-α and IL-1ß gene expression in the odontogenic region of the hypofunctional teeth. (AU)

Polyethylene terephthalate clamps: Optimization in endodontic and restorative practices.

Background: There is a growing search for innovations in dental materials and instruments and, therefore, an increase need to optimize the instruments used in the absolute isolation. The gold standard procedure contributes significantly to the quality of restorative and endodontic procedures. Thus, the aim of the present study was to evaluate the radiopacity of polyethylene terephthalate polymer clamps and compare them to conventional metal clamps. Material and Methods: The polyethylene terephthalate clamp was developed at the University of Uberaba (Patent application #PI0901719-4, Uberaba, MG, Brazil). Five polyethylene terephthalate clamps and five conventional metal clamps were used. The clamps were positioned, next to an aluminum scale, under the same phosphor plate to perform 3 radiographs. The locator cylinder was set perpendicular to the radiographic films at a focal length of 20 cm and set to 60 kVp and 0.06 seconds. After image processing, optical density values were read using DBWin 5.0.4 software. The mean of the 3 readings taken on each clamp was adopted as the radiodensity of the specimen. The differences between the groups were compared using Student's t-test (p<0.05). Results: Polyethylene terephthalate clamps demonstrated significantly lower radiopacity than conventional metal clamps (p<0.05). Conclusions: Polyethylene terephthalate clamps have lower radiopacity when compared to conventional metal clamps. Key words:Rubber Dams, Dentistry, Operative, Endodontics.

Single Nucleotide Polymorphisms in COX2 Is Associated with Persistent Primary Tooth and Delayed Permanent Tooth Eruption.

Persistent primary tooth (PPT) is a prevalent clinical condition that occurs when a primary tooth is over-retained beyond the established period of its normal exfoliation time, remaining in the oral cavity. Many factors could be involved in the risk of PPT; therefore, the aim of this study was to evaluate if single nucleotide polymorphisms (SNPs) in the COX2 gene are associated with PPT. Children undergoing orthodontic treatment were screened. Orthopantomographs were assessed to evaluate PPT according to the Nolla stage of its permanent successor. The primary tooth was considered retained when its successor permanent tooth was in Nolla stage 8 and below the alveolar crypt, Nolla stage 9, or Nolla stage 10. A saliva sample from each child was collected and used for DNA extraction. A real-time PCR of two SNPs, rs689466 (-1195 G/A) and rs5275 (+665 T/C), was performed. A chi-square test was used to compare the allele and genotype distribution. Haplotype analysis was also performed. A total of 100 children were included in the study. Fifty-one had at least one PPT, while 49 children were classified as a control. The number of teeth persistent in the oral cavity ranged from 1 to 8. The genotype distribution was associated with PPT in the co-dominant model (p = 0.006) for SNP rs5275. The individuals that carry two T alleles (TT) compared with the individuals that carry at least one C allele (C + TC) had an almost three times higher chance of presenting with PPT (p = 0.012; OR = 2.99, CI95% 1.28 to 6.95-recessive model). The haplotype C-A for the SNPs rs5275 and rs689466, respectively, was significantly associated (p = 0.042). In conclusion, single nucleotide polymorphisms in the gene encoding for COX2 are associated with persistent primary tooth and may delay permanent tooth eruption.

Transforming Growth Factor Beta Receptor 2 (TGFBR2) Promoter Region Polymorphisms May Be Involved in Mandibular Retrognathism.

Skeletal malocclusions are common phenotypes in humans and have a strong influence on genetic factors. Transforming growth factor beta (TGFß) controls numerous functions of the human body, including cell proliferation, differentiation, and migration. Thus, this study is aimed at evaluating whether genetic polymorphisms in TGFB1 and its receptor TGFBR2 are associated with mandibular retrognathism in German children and adolescents. Children and teenagers older than 8 years in the mixed or permanent dentition were included in this study. Patients with syndromes and facial trauma and patients with congenital alterations were excluded. Digital cephalometric tracings were performed using the anatomical landmarks point A, point B, sella (S), and nasion (N). Patients that have a retrognathic mandible (SNB < 78°) were selected as case group, and the patients with an orthognathic mandible (SNB = 78°- 82°) were selected as the control group. Genomic deoxyribonucleic acid (DNA) from saliva was used to evaluate four genetic polymorphisms in TGFB1 (rs1800469 and rs4803455) and TGBR2 (rs3087465 and rs764522) using real-time PCR. Chi-square or Fisher exact tests were used to compare gender, genotype, and allele distribution among groups. Genotype distribution was calculated in an additive and recessive model. Haplotype analysis was also performed. The established alpha of this study was 5%. A total of 146 patients (age ranging from 8 to 18 years) were included in this epidemiological genetic study. The genetic polymorphism rs3087465 in TGFBR2 was associated with mandibular retrognathism. Carrying the AA genotype in the rs3087465 polymorphism decreased the chance of having mandibular retrognathism (odds ratio = 0.25, confidence interval 95% = 0.06 to 0.94, p = 0.045). None of the haplotypes was associated with mandibular retrognathism (p > 0.05). In conclusion, we found that the genetic polymorphism rs3087465 in the promoter region of the TGFBR2 was associated with mandibular retrognathism in Germans.

Effects of Different Forms of Denture Adhesives on Biofilm Formation, Adhesive Strength and Hygiene of Complete Dentures.

PURPOSE: To evaluate the effect of different forms of denture adhesives on the formation of biofilm and on adhesive strength, as well as the effectiveness of hygiene protocols for their removal. MATERIALS AND METHODS: Samples of the heat-cured polymethyl methacrylate denture base resin were made and divided into four groups: control (no adhesive), ultra Corega cream, Corega strip adhesive, and ultra Corega powder (GlaxoSmithKline). Biofilm formation was evaluated by counting colony-forming units and fluorescence microscopy. To evaluate the effectiveness of the hygiene protocols, the samples were divided into five subgroups: brushing with distilled water; brushing with Protex soap; brushing with Colgate toothpaste; immersion in Corega Tabs; and immersion in Corega Tabs followed by brushing with the solution itself. The remaining adhesive was quantified with ImageJ software. The adhesive strength was tested at different time intervals after application. After verifying the data distribution using Shapiro-Wilk test, parametric or nonparametric analysis was applied (α = .05). RESULTS: Candida albicans formed more biofilm in strip (P = .007) and powder (P = .001), Pseudomonas aeruginosa in cream (P < .001) and powder (P < .001), and Staphylococcus aureus in strip (P < .001). All forms of the adhesives promoted higher biofilm formation when compared to control (P = .003). Brushing with Colgate and Protex was most effective for removing the adhesives (P < .05). Independently, Powder had the highest adhesive strength (P < .05). Only Strip showed a change in adhesive strength, with higher values after 3 hours of application (P = .004). CONCLUSION: Daily treatments with mechanical cleaning of the prosthesis are important for removing the adhesives, since the presence of this material can favor biofilm accumulation. The adhesive strength may vary depending on the commercial type, but all forms can be effective in retaining prostheses for a satisfactory period of time.

Color Stability and Surface Roughness of Hybrid and Nanofilled Composites Brushed with Abrasive Dentifrices / Estabilidade de Cor e Rugosidade Superficial de Resinas Compostas Micro-Híbridas e Nanoparticulada Submetidas à Escovação com Dentifrícios Abrasivos

The aim of this study was to evaluate the color stability and the surface roughness of different composites brushed with toothpastes presenting different levels of abrasivity. Thirty discs of each material were obtained using michohybrid composites (Brilliant NG and Charisma Diamond) and a nanocomposite (Filtek Z350XT). The initial color (CIELab) and surface roughness (confocal laser scanning microscopy) of resin discs were evaluated. Afterwards, 10 specimens per group were brushed with the following dentifrices: Maximum Cavity Protection, Sensodyne Repair & Protect and Colgate Sensitive Pro-Relief. Brushing was performed with an electric toothbrush equipped with soft bristle head, with standard power and weight, for 30 minutes. Every 30 seconds, 1.0 ml of the slurry was injected between the bristles of the brush and the specimen. After abrasive challenge, the samples had their color and roughness reevaluated. Data were submitted to the Kruskal-Wallis test (color change) or the t-test (surface roughness). The level of significance was 5%. Results: Brushing did not significantly change the color of the composites tested in the study herein . On the other hand, the surface roughness of the composites was significantly affected by the abrasive challenge, regardless of the toothpaste used. The surface roughness change was similar for all the composites. The abrasive challenge with the toothpastes Maximum Cavity protection, Sensodyne Repair & Protect and Colgate Sensitive Pro-Relief was not able to significantly change the color of the composite resins. Nevertheless, the abrasive challenges significantly altered the surface roughness of all the evaluated composites. However, the changes in surface roughness were statistically similar in the microhybrid and nanofilled composites. (AU)

O objetivo deste estudo foi avaliar a estabilidade de cor e a rugosidade superficial de diferentes resinas compostas escovadas com dentifrícios de diferentes níveis de abrasividade. Trinta discos de cada material foram obtidos utilizando compósitos micro-híbridos (Brilliant NG e Charisma Diamond) e um nanocompósito (Filtek Z350XT). A cor inicial (CIELab) e a rugosidade superficial (microscopia confocal de varredura a laser) dos discos de resina foram avaliadas. Em seguida, 10 amostras por grupo foram escovadas com os dentifrícios Máxima Proteção Anticáries, Sensodyne Repair & Protect e Colgate Sensitive Pro-Alívio. A escovação foi realizada com uma escova elétrica com cabeça de cerdas macias, com potência e peso padronizados, durante 30 minutos. A cada 30 segundos, 1,0 ml da pasta era injetada entre as cerdas da escova e a amostra. Após o desafio abrasivo, as amostras tiveram sua cor e rugosidade reavaliadas. Os dados foram submetidos ao teste de Kruskal-Wallis (alteração de cor) ou ao teste t (rugosidade da superfície) (α=5%). A escovação não alterou significativamente a cor dos compósitos. Por outro lado, a rugosidade superficial dos compósitos foi significativamente afetada pelo desafio abrasivo, independentemente do dentifrício utilizado. A alteração da rugosidade superficial foi semelhante para todos os compósitos. O desafio abrasivo com a Máxima Proteção Anticáries, o Sensodyne Repair & Protect e o Colgate Sensitive Pro-Alívio não foi capaz de alterar significativamente a cor das resinas. Diferentemente, os desafios abrasivos alteraram significativamente a rugosidade superficial de todos os compósitos avaliados. No entanto, as mudanças na rugosidade foram estatisticamente semelhantes nos compósitos micro-híbridos e nanoparticulado. (AU)

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges.

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 µm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Influence of Er, Cr: YSGG laser on root dentin submitted to erosive and/or abrasive challenges

Abstract This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Clinical evaluation of the immediate masking effect of enamel white spot lesions treated with an infiltrant resin.

The aim of this study was to evaluate, in vivo, the immediate masking effect of white spot lesions (WSLs) treated with an infiltrant resin (IR). The investigation was conducted on 40 young adolescent and adult patients (11 to 23 years old) who presented with at least one permanent maxillary or mandibular anterior tooth with active WSLs on the enamel (ICDAS score 2). Before resin infiltration, the color of both the WSLs and the sound adjacent enamel (SAE) was evaluated by a digital spectrophotometer (CIELab). Subsequently, a resin infiltration technique (Icon) was performed on the WSLs according to the manufacturer's instruction. At the end of the clinical session, the color of the IR was evaluated. The color difference (ΔE) was calculated between WSL × SAE, WSL × IR, and IR × SAE, and then analyzed using one-way analysis of variance (ANOVA), followed by the Tukey's test. The L*, a*, and b* values of WSL, SAE, and IR were compared using the Student's t test for related samples (α = 5%). The ΔE observed was 5.93 ± 0.41 on the WSL × IR comparison, and 5.77 ± 0.41 on the IR × S AE one, indicating that the color of the WSL changed after treatment, but that the infiltration did not fully camouflage the WSLs when compared with the SAE. The lightness was higher for the SAE than for the IR. It was concluded that the IR treatment was not able to camouflage the color of the WSLs when compared with the SAE. However, the treatment was able to attenuate the discoloration of the demineralized dental enamel.