High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer.

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Simple-Structured Acceptor with Highly Interconnected Electron-Transport Pathway Enables High-Efficiency Organic Solar Cells.

Achieving desirable charge-transport highway is of vital importance for high-performance organic solar cells (OSCs). Here, it is shown how molecular packing arrangements can be regulated via tuning the alkyl-chain topology, thus resulting in a 3D network stacking and highly interconnected pathway for electron transport in a simple-structured nonfused-ring electron acceptor (NFREA) with branched alkyl side-chains. As a result, a record-breaking power conversion efficiency of 17.38% (certificated 16.59%) is achieved for NFREA-based devices, thus providing an opportunity for constructing low-cost and high-efficiency OSCs.

General room-temperature Suzuki-Miyaura polymerization for organic electronics.

π-Conjugated polymers (CPs) have broad applications in high-performance optoelectronics, energy storage, sensors and biomedicine. However, developing green and efficient methods to precisely synthesize alternating CP structures on a large scale remains challenging and critical for their industrialization. Here a room-temperature, scalable and homogeneous Suzuki-Miyaura-type polymerization reaction is developed with broad generality validated for 24 CPs including donor-donor, donor-acceptor and acceptor-acceptor connectivities, yielding device-quality polymers with high molecular masses. Furthermore, the polymerization protocol significantly reduces homocoupling structural defects, yielding more structurally regular and higher-performance electronic materials and optoelectronic devices than conventional thermally activated polymerizations. Experimental and theoretical studies reveal that a borate transmetalation process plays a key role in suppressing protodeboronation, which is critical for large-scale structural regularity. Thus, these results provide a general polymerization tool for the scalable production of device-quality CPs with alternating structural regularity.

Precisely Manipulating Molecular Packing via Tuning Alkyl Side-Chain Topology Enabling High-Performance Nonfused-Ring Electron Acceptors.

In the development of high-performance organic solar cells (OSCs), the self-organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side-chain topology in a series of low-cost nonfused-ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA-4, which possesses an asymmetric alkyl side-chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA-4. As a result, the OSC device based on DPA-4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA-based OSCs.

Organic Optoelectronic Synapses for Sound Perception.

The neuromorphic systems for sound perception is under highly demanding for the future bioinspired electronics and humanoid robots. However, the sound perception based on volume, tone and timbre remains unknown. Herein, organic optoelectronic synapses (OOSs) are constructed for unprecedented sound recognition. The volume, tone and timbre of sound can be regulated appropriately by the input signal of voltages, frequencies and light intensities of OOSs, according to the amplitude, frequency, and waveform of the sound. The quantitative relation between recognition factor (ζ) and postsynaptic current (I = Ilight - Idark) is established to achieve sound perception. Interestingly, the bell sound for University of Chinese Academy of Sciences is recognized with an accuracy of 99.8%. The mechanism studies reveal that the impedance of the interfacial layers play a critical role in the synaptic performances. This contribution presents unprecedented artificial synapses for sound perception at hardware levels.

Over 19.2% Efficiency of Organic Solar Cells Enabled by Precisely Tuning the Charge Transfer State Via Donor Alloy Strategy.

The large energy loss (Eloss ) is one of the main obstacles to further improve the photovoltaic performance of organic solar cells (OSCs), which is closely related to the charge transfer (CT) state. Herein, ternary donor alloy strategy is used to precisely tune the energy of CT state (ECT ) and thus the Eloss for boosting the efficiency of OSCs. The elevated ECT in the ternary OSCs reduce the energy loss for charge generation (ΔECT ), and promote the hybridization between localized excitation state and CT state to reduce the nonradiative energy loss (ΔEnonrad ). Together with the optimal morphology, the ternary OSCs afford an impressive power conversion efficiency of 19.22% with a significantly improved open-circuit voltage (Voc ) of 0.910 V without sacrificing short-cicuit density (Jsc ) and fill factor (FF) in comparison to the binary ones. This contribution reveals that precisely tuning the ECT via donor alloy strategy is an efficient way to minimize Eloss and improve the photovoltaic performance of OSCs.

Achieving Record-Efficiency Organic Solar Cells upon Tuning the Conformation of Solid Additives.

Volatile solid additives (SADs) are considered as a simple yet effective approach to tune the film morphology for high-performance organic solar cells (OSCs). However, the structural effects of the SADs on the photovoltaic performance are still elusive. Herein, two volatilizable SADs were designed and synthesized. One is SAD1 with twisted conformation, while the other one is planar SAD2 with the S···O noncovalent intramolecular interactions (NIIs). The theoretical and experimental results revealed that the planar SAD2 with smaller space occupation can more easily insert between the Y6 molecules, which is beneficial to form a tighter intermolecular packing mode of Y6 after thermal treatment. As a result, the SAD2-treated OSCs exhibited less recombination loss, more balanced charge mobility, higher hole transfer rate, and more favorable morphology, resulting in a record power conversion efficiency (PCE) of 18.85% (certified PCE: 18.7%) for single-junction binary OSCs. The universality of this study shed light on understanding the conformation effects of SADs on photovoltaic performances of OSCs.

Binary Organic Solar Cells Breaking 19% via Manipulating the Vertical Component Distribution.

The variation of the vertical component distribution can significantly influence the photovoltaic performance of organic solar cells (OSCs), mainly due to its impact on exciton dissociation and charge-carrier transport and recombination. Herein, binary devices are fabricated via sequential deposition (SD) of D18 and L8-BO materials in a two-step process. Upon independently regulating the spin-coating speeds of each layer deposition, the optimal SD device shows a record power conversion efficiency (PCE) of 19.05% for binary single-junction OSCs, much higher than that of the corresponding blend casting (BC) device (18.14%). Impressively, this strategy presents excellent universality in boosting the photovoltaic performance of SD devices, exemplified by several nonfullerene acceptor systems. The mechanism studies reveal that the SD device with preferred vertical components distribution possesses high crystallinity, efficient exciton splitting, low energy loss, and balanced charge transport, resulting in all-around enhancement of photovoltaic performances. This work provides a valuable approach for high-efficiency OSCs, shedding light on understanding the relationship between photovoltaic performance and vertical component distribution.

Side-Chain Engineering for Enhancing the Molecular Rigidity and Photovoltaic Performance of Noncovalently Fused-Ring Electron Acceptors.

Side-chain engineering is an effective strategy to regulate the solubility and packing behavior of organic materials. Recently, a unique strategy, so-called terminal side-chain (T-SC) engineering, has attracted much attention in the field of organic solar cells (OSCs), but there is a lack of deep understanding of the mechanism. Herein, a new noncovalently fused-ring electron acceptor (NFREA) containing two T-SCs (NoCA-5) was designed and synthesized. Introduction of T-SCs can enhance molecular rigidity and intermolecular π-π stacking, which is confirmed by the smaller Stokes shift value, lower reorganization free energy, and shorter π-π stacking distance in comparison to NoCA-1. Hence, the NoCA-5-based device exhibits a record power conversion efficiency (PCE) of 14.82 % in labs and a certified PCE of 14.5 %, resulting from a high electron mobility, a short charge-extraction time, a small Urbach energy (Eu ), and a favorable phase separation.

Integrating Nano-Cu2O@ZrP into In Situ Polymerized Polyethylene Terephthalate (PET) Fibers with Enhanced Mechanical Properties and Antibacterial Activities.

The approach of in situ polymerization modification has proven to be an effective route for introducing functions for polyester materials. In this work, Cu2O@ZrP nanosheets with excellent dispersity and high antibacterial activity were integrated into in situ polymerized polyethylene terephthalate (PET) fibers, revealing an enhanced mechanical performance in comparison with the PET fibers fabricated directly via a traditional melt blending method. Additionally, such an in situ polymerized PET/Cu2O@ZrP fibers displayed highly enhanced mechanical properties; and great antibacterial activities against multi-types of bacterium, including S. aureus, E. coli and C. albicans. For the as-obtained two types of PET/Cu2O@ZrP fibers, we have detailed their molecular weight (detailed molecular weight) and dispersibility of nano-Cu2O@ZrP and fibers crystallinity was investigated by Gel chromatography (GPC), Scanning electron microscope (SEM), and X-ray diffractometer (XRD), respectively. The results showed that the aggregation of the nano-Cu2O@ZrP in the resultant PET matrix could be effectively prevented during its in situ polymerization process, hence we attribute its highly enhanced mechanical properties to its superior dispersion of nano-Cu2O@ZrP.

Effect of dietary alanyl-glutamine dipeptide against chronic ammonia stress induced hyperammonemia in the juvenile yellow catfish (Pelteobagrus fulvidraco).

Triplicate groups of juvenile yellow catfish (1.98 ±â€¯0.01 g) were fed diets supplemented with 0% and 1% alanyl-glutamine dipeptide (AGD) for 56 days under three ammonia concentrations (0.01, 5.70 and 11.40 mg L-1 total ammonia nitrogen). The results showed that ammonia poisoning could induce growth (weight gain and specific growth rate) and survival reduction, live ammonia and serum malondialdehyde accumulation, and subsequently lead to blood deterioration (serum total protein, albumin, globulin, alkaline phosphatase and acid phosphatase reduced), oxidative stress (superoxide dismutase and glutathione peroxidase activities declined), and induce down-regulation of antioxidant enzymes (SOD, GPX and GRX) genes transcription. However, dietary supplemented with 1% AGD could mitigate the adverse effect of ammonia poisoning on fish growth performance.

Covalent modification of graphene oxide with carbazole groups for laser protection.

In the past decades, significant effort has been invested into the research and development of optical limiting materials and processes in order to develop practical solutions for the protection from laser beams. In this study, a new soluble graphene oxide based material (GO-Cz) has been synthesized through the covalent modification of graphene oxide (GO) with a carbazole derivative (Cz). The formation of an amido bond between the Cz group and GO has been confirmed by X-ray photoelectron and Fourier transform infrared spectroscopy. At the same concentration, both the nonlinear extinction coefficient and the imaginary third-order susceptibility were increased by a factor of ≈6.93 at 532 nm and ≈6.07 at 1064 nm relative to those of GO, as a result of the covalent grafting of the Cz moieties onto the GO surface. The GO-Cz dispersions exhibit a much better optical limiting performance than GO and GO/Cz blends at both 532 and 1064 nm due to the possible intramolecular electron-transfer between the GO and Cz moieties and the effective combination of the different nonlinear optical mechanisms.