A special coupling strategy: Cu2MoS4 as a large-sized co-catalyst for promoting photocatalytic hydrogen production performance.

The photocatalytic hydrogen production performance of semiconductor materials can be improved by co-catalyst modification. In most of the studies, the size of the co-catalyst is relatively small compared to the primary catalyst. However, in this study, we employed a novel strategy by synthesizing a relatively large-sized Cu2MoS4 as the co-catalyst and in situ loading smaller-sized Zn0.5Cd0.5S onto Cu2MoS4, verifying that Cu2MoS4 enhances the photocatalytic hydrogen production efficiency of Zn0.5Cd0.5S. It can be observed by scanning electron microscopy (SEM) that the lateral size of 2D Cu2MoS4 is at least 50 times larger than the Zn0.5Cd0.5S nanoparticle particle size. In addition, Density Functional Theory (DFT) calculations have demonstrated that the active site for hydrogen production in the composite is located in Cu2MoS4. The large-sized of Cu2MoS4 not only provides more active sites but also broadens the electron transport channel, which is conducive to promoting the transfer of photogenerated electrons from Zn0.5Cd0.5S. This work enriches the study of large-sized materials as co-catalyst and provides a strategy for the construction of composite catalysts.

AgNPs with CNTs to construct multifunctional flexible sensor with dual conductive network structure.

Flexible sensors play an important role in the field of smart devices. However, most flexible sensors suffer from poor sensing signal stability and monofunction. In this study, a multifunctional film (named PM) with dual conductive network structure was fabricated by nanocellulose crystal dispersed with silver nanoparticles and carbon nanotube. The PM film exhibited excellent conductivity (24.6 S/m) along with antimicrobial effects against Staphylococcus aureus and Escherichia coli. Furthermore, the PM sensor showed excellent electrothermal performance, reaching 133.1 °C within 50 s at 12 V, and an excellent temperature coefficient of resistance (TCR = -0.65 % °C-1) over a temperature range of 36-124 °C. More importantly, the PM sensor demonstrated a high strain sensitivity (GF = 1.66) and durability (320 cycles), capable of detecting minute human body movements at a strain as low as 1 %. Additionally, the PM sensor maintained a stable sensing performance even after 30 d of exposure to air. Therefore, the multifunctional integration of the PM sensor shows great potential for application in the field of flexible electronics.

Redo-TAVR for bioprosthetic valve degeneration with obvious neoplasm in a left cerebral infarction patient.

Key Clinical Message: In recent years, it is necessary to Redo-TAVR for the patients with bioprosthetic valve degeneration. This case report described a unique instance to successfully Redo-TAVR a patient with bioprosthetic valve degeneration, in addition, with left cerebral infarction and renal insufficiency. Abstract: Over time, more and more patients have bioprosthetic valve degeneration either used in SAVR or TAVR. In order to solve the produced problems due to the degenerated bioprosthetic valve, Redo-TAVR was increasingly popular due to its safe and efficiency especially for the high risk and complicated symptoms patients. In this case, the patient with left cerebral infarction and renal insufficiency has exhibited severe regurgitation and obvious neoplasm around the previous replaced aortic valve. For the patient with complicated symptoms, we did not image for this patient and only used CT to determine the position and angle for the Redo-TAVR on the base of metal stent for the previous replaced aortic valve. During the Redo-TAVR process, for fear of the obvious neoplasm slipping from the previous replaced aortic valve to embolism of important organs, before carrying out the Redo-TAVR, cerebral protection device, temporary pacemaker, and coronary artery protection device were utilized in order to avoid the damage for the important organs from the obvious neoplasm slipping from the previous replaced aortic valve. The surgery was successful and the patient recovered well. The patient's symptoms of chest tightness and suffocation have been greatly reduced.

Correction: Nickel-catalyzed γ-alkylation of cyclopropyl ketones with unactivated primary alkyl chlorides: balancing reactivity and selectivity via halide exchange.

[This corrects the article DOI: 10.1039/D4RA02616K.].

RhIII-Catalyzed Direct Heteroarylation of Unactivated C(sp3)-H with N-Heteroaryl Boronates.

Disclosed herein is a rhodium(III)-catalyzed direct heteroarylation reaction between unactivated aliphatic C(sp3)-H bonds in 2-alkylpyridines and heteroaryl organoboron reagents. This catalytic protocol is compatible with various heterocyclic boronates containing ortho- and meta-pyridine, pyrazoles, furan, and quinoline with strong coordination capability. The achievement of this methodology provides an efficient route to build new C(sp3)-heteroaryl bonds.

A nanocomposite hydrogel loaded with Ag nanoparticles reduced by aloe vera polysaccharides as an antimicrobial multifunctional sensor.

Developing high-performance hydrogels with anti-freeze, and antimicrobial properties is crucial for the practical application of flexible sensors. In this study, we prepared silver nanoparticles (AgNPs) with aloe polysaccharide (AP) as a reducing agent. Then, the AP/AgNPs were added to a system of polyvinyl alcohol and borax crosslinked in water/glycerol to obtain a multifunctional conductive hydrogel. The incorporated AgNPs improved the conductivity (0.39 S/m) and mechanical properties (elongation at break: 732.9 %, fracture strength: 1267.6 kPa) of the hydrogel. In addition, resultant hydrogel exhibited potential for sensing strain, temperature, and humidity. When used as a strain sensor, the hydrogel system exhibited low detection limit (0.1 %), and fast response (0.08 s). The resistance of the hydrogel decreased with an increase in the absorbed moisture content, enabling humidity detection (25-95 %) to monitor breathing status. As a temperature sensor, the hydrogel supported a wide detection range (-50 to +90 °C) and sensitivity (-30-0 °C, temperature coefficient of resistance (TCR) = -5.64 %/°C) to detect changes in the ambient temperature. This study proposes a simple method for manufacturing multifunctional hydrogel sensors, which broadens their application prospects in wearable sensing and electronic products.

Nickel-catalyzed γ-alkylation of cyclopropyl ketones with unactivated primary alkyl chlorides: balancing reactivity and selectivity via halide exchange.

A novel method was developed for synthesizing γ-alkyl ketones via nickel-catalyzed cross-electrophile coupling of cyclopropyl ketones and non-activated primary alkyl chlorides. High reactivity and selectivity can be achieved with sodium iodide as a crucial cocatalyst that generates a low concentration of alkyl iodide via halide exchange, thus avoiding the formation of alkyl dimers. This reaction possessed excellent regioselectivity and high step economy circumventing in situ or pregenerated organometallics.

A nanocellulose-based flexible multilayer sensor with high sensitivity to humidity and strain response for detecting human motion and respiration.

Biomass-based flexible sensors with excellent mechanical and sensing properties have attracted significant attention. In this study, based on the excellent dispersibility and degradability of nanocellulose crystals, we designed a polyvinyl alcohol/nanocellulose crystals/phytic acid (PCP) composite film with good flexibility and high sensitivity to humidity. A layer of multiwalled carbon nanotubes (MWCNT) and nanocellulose crystals (CNC) was further sandwiched between two PCP layers as a flexible multifunctional sensor (PCPW) to detect human movement and respiration. Phytic acid contains abundant phosphate groups that enhance proton conduction, allowing the PCPW composite film to change its electrical resistance in a sensitive and repeatable manner when the relative humidity was varied between 35 %-93 %. Meanwhile, CNC derived from sisal fibers enhanced the PCPW sensor's conductivity (3.3 S/m) and mechanical properties (elongation at break: 99 %) by improving the dispersion and connectivity of MWCNT. The PCPW sensor displayed a high sensitivity to strain (gauge factor: 49.5) and could monitor both facial expressions (smiling and winking) and the bending of joints. The sensor also generated stable electrical responses during breathing and blowing due to the change in humidity. Therefore, this biodegradable and multifunctional sensor has good application prospects.

[Establish a Graded Method to Avoid HLA Class I Antibodies Corresponding Antigen and Combining HLAMatchmaker Application in Improving the CCI Value after Platelet Transfusion for Patients with IPTR].

OBJECTIVE: To establish a graded method to avoid mean fluorescence intensity (MFI) threshold of HLA Class I antibodies corresponding antigen, and the HLAMatchmaker program has been used to select the minimum mismatch value of donor-patient epitopes. Evaluate the application value of combining both methods in selecting HLA compatible platelets (PTL) for patients with immune platelet transfusion failure (IPTR) in improving platelet the corrected count increment (CCI). METHODS: A total 7 807 PLT cross-matching compatible were performed by the solid-phase red cell adherence (SPRCA) method for 51 IPTR patients. The Luminex single antigen flow cytometry was used to detect HLA Class I antibodies in patients, and detected the MFI value for different specificity antigens of HLA Class I antibodies, was graded into strong positive group (MFI>4 000, level 1), medium positive group (1 000< MFI≤4 000, 2), weak positive group (500< MFI≤1 000, 3), and one negative control group (MFI≤500). The results of 7 807 SPRCA their negative/positive reaction wells were enrolled and statistically analyzed in different grades and the four groups, the statistical differences between the four groups were compared. Multiple applications for the select HLA Class I compatible donor events were made for patients in two cases, and HLAMatchmaker program was used to calculate the number of HLA Class I epitopes mismatches between the donors and patients. The donor with the minimum number of epitopes mismatches was selected, while avoiding the corresponding antigens of HLA Class I antibodies in levels 1 and 2, the provision of HLA compatible platelets for IPTR. After the transfusions, the CCI value of the platelet transfusion efficacy evaluation index was calculated, and the clinical evaluation of the transfusion effect was obtained through statistical analysis. RESULTS: There were statistically significant differences in the positive results of SPRCA immunoassay among the strong positive group, medium positive group, and weak positive group of 51 IPTR patients with different specific of HLA -I class antibodies and corresponding antigens(all P <0.001). The positive results showed a range from high to low, with strong positive group>medium positive group>weak positive group. There were a statistical difference among between the strongly positive or moderately positive groups and the negative control group(P <0.001). There was no statistical difference between the weakly positive group and the negative control group(P >0.05). The strong positive group was set as the corresponding specific HLA Class I site corresponding antigen grade 1 avoidance threshold, the medium positive group as the grade 2 avoidance thresholds, and the weak positive group as the grade 3 avoidance threshold. In the case of donor platelet shortage, it is not necessary to avoid the weak positive group. Avoiding the strategy of donor antigens and HLAMatchmaker program scores ≤7 corresponding to HLA Class I antibodies of levels 1 and 2, with CCI values>4.5×109/L within 24 hours, can obtain effective clinical platelet transfusion conclusions. CONCLUSION: When selecting HLA Class I compatible donors for IPTR patients, the grading avoids HLA Class I antibodies corresponding to donor antigens, and the donor selection strategy with the minimum scores of HLAMatchmaker program is comprehensively selected. The negative result confirmed by platelet cross-matching experiments has certain practical application value for improving platelet count in IPTR patients.

Solitary bone plasmacytoma of spine with involvement of intervertebral disk: a case report and literature review.

Primary malignant bone tumors of the spine are exceedingly rare, with solitary bone plasmacytoma (SBP) representing approximately 30% of all cases. Radiological assessments are crucial for localizing SBP and for ruling out a diagnosis of multiple myeloma (MM). Imaging features resembling a "mini-brain" appear to be distinctive for SBP. Vertebral lesions accompanied by adjacent disc space involvement typically suggest spinal infections, while the potential for SBP involvement is often overlooked. We present a case of a 61-year-old female with SBP who exhibited thoraco-lumbar spine destruction and adjacent disc space involvement. The patient sought treatment at our medical center due to lumbodorsal pain radiating bilaterally to the inguinal regions. Radiological findings revealed an osteolytic lesion involving the intervertebral disc, making it challenging to distinguish between tumor and inflammation. A biopsy of the vertebral lesion confirmed the diagnosis of SBP, which was further supported by laboratory results. Post-diagnosis, the patient underwent radiotherapy, receiving a total dose of 4000 Gy, which alleviated her symptoms. We also provide a comprehensive literature review on SBP with disc involvement to aid both clinical and radiological diagnoses.

Low 18F-fluorodeoxyglucose dose positron emission tomography assisted by a deep-learning image-denoising technique in patients with lymphoma.

Background: Patients with lymphoma receive multiple positron emission tomography/computed tomography (PET/CT) exams for monitoring of the therapeutic response. With PET imaging, a reduced level of injected fluorine-18 fluorodeoxyglucose ([18F]FDG) activity can be administered while maintaining the image quality. In this study, we investigated the efficacy of applying a deep learning (DL) denoising-technique on image quality and the quantification of metabolic parameters and Deauville score (DS) of a low [18F]FDG dose PET in patients with lymphoma. Methods: This study retrospectively enrolled 62 patients who underwent [18F]FDG PET scans. The low-dose (LD) data were simulated by taking a 50% duration of routine-dose (RD) PET list-mode data in the reconstruction, and a U-Net-based denoising neural network was applied to improve the images of LD PET. The visual image quality score (1 = undiagnostic, 5 = excellent) and DS were assessed in all patients by nuclear radiologists. The maximum, mean, and standard deviation (SD) of the standardized uptake value (SUV) in the liver and mediastinum were measured. In addition, lesions in some patients were segmented using a fixed threshold of 2.5, and their SUV, metabolic tumor volume (MTV), and tumor lesion glycolysis (TLG) were measured. The correlation coefficient and limits of agreement between the RD and LD group were analyzed. Results: The visual image quality of the LD group was improved compared with the RD group. The DS was similar between the RD and LD group, and the negative (DS 1-3) and positive (DS 4-5) results remained unchanged. The correlation coefficients of SUV in the liver, mediastinum, and lesions were all >0.85. The mean differences of SUVmax and SUVmean between the RD and LD groups, respectively, were 0.22 [95% confidence interval (CI): -0.19 to 0.64] and 0.02 (95% CI: -0.17 to 0.20) in the liver, 0.13 (95% CI: -0.17 to 0.42) and 0.02 (95% CI: -0.12 to 0.16) in the mediastinum, and -0.75 (95% CI: -3.42 to 1.91), and -0.13 (95% CI: -0.57 to 0.31) in lesions. The mean differences in MTV and TLG were 0.85 (95% CI: -2.27 to 3.98) and 4.06 (95% CI: -20.53 to 28.64) between the RD and LD groups. Conclusions: The DL denoising technique enables accurate tumor assessment and quantification with LD [18F]FDG PET imaging in patients with lymphoma.

Discovery of the novel HLA-A*11:452N allele by next-generation sequencing in a Chinese individual.

HLA-A*11:452N differs from A*11:01:01:01 by a single nucleotide exchange in exon 1.

In situ reduction of Ag nanoparticles using okra polysaccharides for the preparation of flexible multifunctional sensors.

This paper reports the fabrication of flexible films loaded with Ag nanoparticles (Ag NPs) and annotated as POPA films from polyvinyl alcohol, okra polysaccharides, phytic acid, and AgNO3 via an in situ reduction and solution-casting method. The prepared films exhibit strain, temperature, and humidity sensing. As a flexible strain sensor, the POPA sensor has a wide strain sensing range (1-250 %), and fast response/recovery (0.22/0.28 s), while as a temperature sensor, it senses the human body temperature and exhibits excellent temperature sensitivity (TCR = -1.401 % °C-1) and good linearity (R2 = 0.994) in the temperature range of 30-55 °C. Additionally, in the relative humidity (RH) of range 35-95 %, the POPA humidity sensor outputs stable electrical signals during adsorption and desorption. Moreover, it exhibits low hysteresis values (3.19 % RH) and good linearity (R2 = 0.989) for the detection of breathing rates during different human body states. Consequently, the POPA sensor exhibits good stability, repeatability, and reversibility for strain, temperature, and humidity sensing. The designed multifunctional POPA sensor thus holds great potential for its application in flexible wearable devices and electronics.

Highly stretchable anti-freeze hydrogel based on aloe polysaccharides with high ionic conductivity for multifunctional wearable sensors.

Conductive hydrogels have limitations such as non-degradability, loss of electrical conductivity at sub-zero temperatures, and single functionality, which limit their applicability as materials for wearable sensors. To overcome these limitations, this study proposes a bio-based hydrogel using aloe polysaccharides as the matrix and degradable polyvinyl alcohol as a reinforcing material. The hydrogel was crosslinked with borax in a glycerol-water binary solvent system, producing good toughness and compressive strength. Furthermore, the hydrogel was developed as a sensor that could detect both small and large deformations with a low detection limit of 1 % and high stretchability of up to 300 %. Moreover, the sensor exhibited excellent frost resistance at temperatures above -50 °C, and the gauge factor of the hydrogel was 2.86 at 20 °C and 2.12 at -20 °C. The Aloe-polysaccharide-based conductive hydrogels also functioned effectively as a wearable sensor; it detected a wide range of humidities (0-98 % relative humidity) and exhibited fast response and recovery times (1.1 and 0.9 s) while detecting normal human breathing. The polysaccharide hydrogel was also temperature sensitive (1.737 % °C-1) and allowed for information sensing during handwriting.

Chromosome-level genome assembly of sea scallop Placopecten magellanicus provides insights into the genetic characteristics and adaptive evolution of large scallops.

Placopecten magellanicus (Gmelin, 1791), a deep-sea Atlantic scallop, holds significant commercial value as a benthic marine bivalve along the northwest Atlantic coast. Recognizing its economic importance, the need to reconstruct its genome assembly becomes apparent, fostering insights into natural resources and generic breeding potential. This study reports a high-quality chromosome-level genome of P. magellanicus, achieved through the integration of Illumina short read sequencing, PacBio HiFi sequencing, and Hi-C sequencing techniques. The resulting assembly spans 1778 Mb with a scaffold N50 of 86.71 Mb. An intriguing observation arises - the genome size of P. magellanicus surpasses that of its Pectinidae family peers by 1.80 to 2.46 times. Within this genome, 28,111 protein-coding genes were identified. Comparative genomic analysis involving five scallop species unveils the critical determinant of this expanded genome: the proliferation of repetitive sequences recently inserted, contributing to its enlarged size. The landscape of whole genome collinearity sheds light on the relationships among scallop species, enhancing our broader understanding of their genomic framework. This genome provides genomic resources for future molecular biology research on scallops and serves as a guide for the exploration of longevity-related genes in scallops.

Genomic sequence of the novel HLA-A*26:206:02N allele, identified in a patient with hepatitis B infection.

HLA-A*26:206:02N differs from A*26:01:01:01 by a single nucleotide exchange in exon 3.

Biodegradable ion-conductive polyvinyl alcohol/okra polysaccharide composite films for fast-response respiratory monitoring sensors.

Polyvinyl alcohol (PVA) and okra polysaccharide (OP) are biodegradable polymers with high hydrophilicity and good biocompatibility with potential for use as flexible humidity-sensitive materials. Herein, biodegradable flexible composite films (named POP films) were prepared from PVA, OP, and phytic acid using a solution-casting method based on. POP films exhibited excellent mechanical strength, flexibility, flame retardancy, water resistance, humidity response, and humidity-sensing characteristics. Notably, the POP humidity sensors exhibited a hysteresis value of 1.88 % relative humidity for the adsorption and desorption processes and good sensitivity over a wide humidity range of 35-95 %. In addition, the humidity sensor distinguished the frequency of nose breathing, and its response and recovery times were 0.9 and 1.98 s, respectively. The excellent performance of POP sensors in monitoring humidity and human respiratory rates demonstrates the sensor's potential for wearable smart devices.

Functionalized 2D defect g-C3N4 for artificial photosynthesis of H2O2 and synchronizing tetracycline fluorescence detection and degradation.

Artificial photosynthesis of H2O2 is a clean production technology, which brings the synergistic effect to photodegradation of pollutants. Inspired by defect engineering, 2D defective carbon nitride (g-C3N4) photocatalyst was obtained via potassium ion assisted synthesis. Defective g-C3N4 is protonated and applied to photosynthesis of H2O2, H2O2 concentration produced reached 477.7 µM, which was approximately 5.27 times that by pristine g-C3N4. Additionally, defective g-C3N4 materials are borrowed to synchronizing tetracycline (TC) fluorescence detection and degradation, suggesting the catalyst existed bifunctional characteristics of TC detection and degradation. Meanwhile, metal impregnation engineering (molybdenum) was borrowed enhancing the electron-trapping ability in local region of defective g-C3N4, which takes advantages to the efficient degradation of TC. Furthermore, optical and electrical properties of photocatalysts were investigated in details by advanced material characterization testing. This work provides potential applications in the field of artificial photosynthesis and pollution degradation.

Polysaccharides from marine biological resources and their anticancer activity on breast cancer.

In recent decades, natural products from marine organisms have been widely studied for the treatment of various breast cancers. Among them, polysaccharides have been favored by researchers because of their good effects and safety. In this review, polysaccharides from marine algae including macroalgae and microalgae, chitosan, microorganisms such as marine bacteria and fungi, and starfish are addressed. Their anticancer activities on different breast cancers and action mechanisms are discussed in detail. In general, polysaccharides from marine organisms are potential sources of low side-effect and high efficiency anticancer drugs for development. However, further research on animals and clinical research are needed.

RhIII-promoted directed C-H N-heteroarylation of 2-pyridones.

A catalytic protocol for the Cp*RhIII-promoted C6-selective N-heteroarylation of 2-pyridones with N-heterocyclic boronates has been successfully developed utilizing a removable pyridine auxiliary. This system features high efficiency with mild conditions and also tolerates ortho- and meta-substituted pyridines, pyrazoles, pyrimidine, non-substituted quinolines, thiophene and furan well. The easy synthetic approach could potentially be applied to construct heterocyclic drug molecules bearing 2-pyridone-heteroaryl motifs.