Effects of lactic acid and ascorbic acid electrostatic spraying on the physicochemical attributes and microbial diversity of beef aged at mild temperature (10 °C).

This study aimed to clarify the effect of electrostatic spraying of lactic acid (LE) and ascorbic acid (AE) on vacuum-packaged beef aged at 10 °C. The physicochemical attributes, flavor profiles, and microbial diversities were evaluated. Beef steaks were electrostatically sprayed twice with 4% LE, 0.5% AE, or a mixture of them (LAE). Afterward, the beef was vacuum-packaged and aged. All treated beef exhibited a decrease in quality and sensory scores over time. At the end of the study period, the total viable count (TVC) and the total volatile basic nitrogen values in the control group (7.34 log CFU/g and 15.52 mg/100 g, respectively) were higher than those in the acid-treated groups. The LAE group exhibited the best color stability and the lowest TVC and Enterobacteriaceae counts after aging. High-throughput sequencing analysis revealed that acid types and electrostatic spray could change the microbiota structure. Leuconostoc was the dominant bacteria in the AE and LAE groups, while Enterococcus became the predominant bacteria in the NLE and LE groups with aging. This indicates that electrostatic spray combined with acid treatment can ensure beef quality and microbiological safety at mild temperatures.

Dual-ligand lanthanide metal-organic framework based ratiometric fluorescent platform for visual monitoring of aminoglycoside residues in food samples.

Herein, a dual-emission Eu metal-organic framework (Eu-MOF) is prepared and used as the ratiometric fluorescence probe for ultrasensitive detection of aminoglycoside antibiotics (AGs). Due to the strong hydrogen bond interactions between AGs and Eu-MOF, the blue emission is enhanced while the red emission has little fluctuation in Eu-MOF with the addition of AGs, thus a good linear relationship with the logarithm of AGs concentrations from 0.001 to 100 µg/mL can be established for quantitative analysis. Good sensitivity with the detection limit of 0.33 ng/mL for apramycin, 0.32 ng/mL for amikacin and 0.30 ng/mL for kanamycin is achieved. The proposed assay demonstrates good selectivity and applicability for determination of AGs in real milk and honey samples. The Eu-MOF materials are further fabricated as fluorescent test papers for facile visual detection. The as-established ratio fluorescence platform offers a portable and economical way for rapid monitoring AGs residues in complex food samples.

Magnetic beads and GO-assisted enzyme-free signal amplification fluorescent biosensors for disease diagnosis.

Cancer detection is still a major challenge in public health. Identification of oncogene is the first step toward solving this problem. Studies have revealed that various cancers are associated with miRNA expression. Therefore, the sensitive detection of miRNA is substantially important to solve the cancer problem. In this study, let-7a, a representative substance of miRNA, was selected as the detection target. With the assistance of magnetic beads commonly used in biosensors and self-synthesized graphene oxide materials, specificity and sensitivity detection of the target gene let-7a were achieved via protease-free signal amplification. The limit of detection (LOD) was as low as 15.015pM. The fluorescence signal intensity showed a good linear relationship with the logarithm of let-7a concentration. The biosensor could also detect let-7a in complex human serum samples. Overall, this fluorescent biosensor is not only simple to operate, but also strongly specificity to detect let-7a. Therefore, it has substantial potential for application in the early diagnosis of clinical medicine and biological research.

Research advances in the molecular classification of gastric cancer.

Gastric cancer (GC) is a malignant tumor with one of the lowest five-year survival rates. Traditional first-line treatment regimens, such as platinum drugs, have limited therapeutic efficacy in treating advanced GC and significant side effects, greatly reducing patient quality of life. In contrast, trastuzumab and other immune checkpoint inhibitors, such as nivolumab and pembrolizumab, have demonstrated consistent and reliable efficacy in treating GC. Here, we discuss the intrinsic characteristics of GC from a molecular perspective and provide a comprehensive review of classification and treatment advances in the disease. Finally, we suggest several strategies based on the intrinsic molecular characteristics of GC to aid in overcoming clinical challenges in the development of precision medicine and improve patient prognosis.

Comparative in vitro toxicological effects of water-soluble and insoluble components of atmospheric PM2.5 on human lung cells.

Fine particulates in city air significantly impact human health, but the hazardous compositional mechanisms are still unclear. Besides the toxicity of environmental PM2.5 to in vitro human lung epithelial cells (A549), the independent cytotoxicity of PM2.5-bound water-soluble (WS-PM2.5) and water-insoluble (WIS-PM2.5) fractions were also compared by cell viability, oxidative stress (reactive oxygen species, ROS), and inflammatory injury (IL-6 and TNF-α). The cytotoxicity of PM2.5 varied significantly by sampling season and place, with degrees greater in winter and spring than in summer and autumn, related to corresponding trend of air PM2.5 level, and also higher in industrial than urban site, although their PM2.5 pollution levels were comparable. The PM2.5 bound metals (Ni, Cr, Fe, and Mn) may contribute to cellular injury. Both WS-PM2.5 and WIS-PM2.5 posed significant cytotoxicity, that WS-PM2.5 was more harmful than WIS-PM2.5 in terms of decreasing cell viability and increasing inflammatory cytokines production. In particular, industrial samples were usually more toxic than urban samples, and those from summer were generally less toxic than other seasons. Hence, in order to mitigate the health risks of PM2.5 pollution, the crucial targets might be components of heavy metals and soluble fractions, and sources in industrial areas, especially during the cold seasons.

Foliar Application of Nanoparticles Reduced Cadmium Content in Wheat (Triticum aestivum L.) Grains via Long-Distance "Leaf-Root-Microorganism" Regulation.

Foliar application of beneficial nanoparticles (NPs) exhibits potential in reducing cadmium (Cd) uptake in crops, necessitating a systematic understanding of their leaf-root-microorganism process for sustainable development of efficient nano-enabled agrochemicals. Herein, wheat grown in Cd-contaminated soil (5.23 mg/kg) was sprayed with different rates of four commonly used NPs, including nano selenium (SeNPs)/silica (SiO2NPs)/zinc oxide/manganese dioxide. SeNPs and SiO2NPs most effectively reduced the Cd concentration in wheat grains. Compared to the control, Cd concentration in grains was significantly decreased by 35.0 and 33.3% by applying 0.96 mg/plant SeNPs and 2.4 mg/plant SiO2NPs, and the grain yield was significantly increased by 33.9% with SeNPs application. Down-regulated gene expression of Cd transport proteins (TaNramp5 and TaLCT1) and up-regulated gene expression of vacuolar Cd fixation proteins (TaHMA3 and TaTM20) were observed with foliar SeNPs and SiO2NPs use. SeNPs increased the levels of leaf antioxidant metabolites. Additionally, foliar spray of SeNPs resulted in lower abundances of rhizosphere organic acids and reduced Cd bioavailability in rhizosphere soil, and soil microorganisms related to carbon and nitrogen (Solirubrobacter and Pedomicrobium) were promoted. Our findings underscore the potential of the foliar application of SeNPs and SiO2NPs as a plant and rhizosphere soil metabolism-regulating approach to reduce Cd accumulation in wheat grains.

Perioperative management of bronchoscopy in a child patient with central core disease: A case report and literature review.

INTRODUCTION: We described the perioperative management of a child patient with central core disease for bronchoscopy with bronchoalveolar lavage. It is safe to avoid triggering agents (volatile anesthetics and succinylcholine) probably in preventing this appearance of malignant hyperthermia (MH). It is important to recognize potential complications and know how to prevent and manage them in patients with this condition. PRESENTATION OF CASE: A 5-year-old boy (weight: 8.8 kg; height: 63 cm) presented to the pediatric department after five days of intermittent fever (highest body temperature is 39.3 °C) and cough, and aggravation 1 day, meanwhile he had phlegm in throat but he couldn't cough out. The child was found to have motor retardation at his one-month-old physical examination, then genetic analysis showed central core disease. Bronchoscopy with bronchoalveolar lavage was performed for better treatment under the premise of symptomatic treatment. DISCUSSION: The patients with central core disease are particularly to develop malignant hyperthermia, so adequate precautions are in place to prevent and treat MH before anesthetic induction. The anesthesiologists need to make adequate preoperative anesthesia management strategies to ensure the safety of the child with central core disease for bronchoscopy with bronchoalveolar lavage. The child was discharged from the hospital one week after anti-inflammatory and anti-asthmatic treatment. CONCLUSION: We summarized the anesthetic precautions and management in patients with central core disease, meanwhile we offered some suggestions about anesthetic focus on bronchoscopy with bronchoalveolar lavage.

Ultrathin Al2O3film modification on waterborne epoxy coatings by atomic layer deposition for augmenting the corrosion resistance.

The polar channels formed by the curing of waterborne anticorrosive coatings compromise their water resistance, leading to coating degradation and metal corrosion. To enhance the anticorrosive performance of waterborne coatings, this study proposed a novel method of depositing ultrathin Al2O3films on the surface of waterborne epoxy coatings by atomic layer deposition, a technique that can modify the surface properties of polymer materials by depositing functional films. The Al2O3-modified coatings exhibited improved sealing and barrier properties by closing the polar channels and surface defects and cracks. The surface structure and morphology of the modified coatings were characterized by x-ray photoelectron spectroscopy and scanning electron microscopy. The hydrophilicity and corrosion resistance of the modified coatings were evaluated by water contact angle measurement, Tafel polarization curve, and electrochemical impedance spectroscopy. The results indicated that the water contact angle of the Al2O3-modified coating increased by 48° compared to the unmodified coating, and the protection efficiency of the modified coating reached 99.81%. The Al2O3-modified coating demonstrated high anticorrosive efficiency and potential applications for metal anticorrosion in harsh marine environments.

Exposure to Endocrine-Disrupting Chemicals and Congenital Heart Diseases: The Pooled Results Based on the Current Evidence.

The relationships between maternal exposure to endocrine-disrupting chemicals (EDCs) and congenital heart diseases (CHD) are not elucidated yet. The exposure levels of EDCs are generally estimated based on self-reported questionnaires or occupational exposure evaluations in the literature. Therefore, a study based on epidemiological data from human biospecimens is required to provide stronger evidence between maternal exposure to EDC and CHD. Embase, Pubmed, Scopus, and the Cochrane Library databases were searched for related research which provided risk estimates regarding the relationships between maternal EDC exposure and CHD in human offspring. Baseline characteristics and outcomes of CHD were extracted from each included study. Odds ratios (ORs) with 95% confidence intervals (CIs) were pooled to calculate the overall estimates of CHD. Subgroup and meta-regression analyses were performed to identify the sources of heterogeneity. Bootstrapping techniques were used in analyses where several studies originated from a similar population. A total of seventeen studies were involved in the meta-analyses. Maternal EDC exposure was significantly related to CHD in offspring (OR 2.15; 95%CI 1.64 to 2.83). EDC exposure was significantly associated with septal defects (OR 2.34; 95%CI 1.77 to 3.10), conotruncal defects (OR 2.54; 95%CI 1.89 to 3.43), right ventricular outflow tract obstruction (OR 2.65; 95%CI 1.73 to 4.07), left ventricular outflow tract obstruction (OR 3.58; 95%CI 2.67 to 4.79), anomalous pulmonary venous return (OR 2.31; 95%CI 1.34 to 4.00), and other heart defects (OR 2.49; 95%CI 1.75 to 3.54). In addition, maternal exposure to heavy metals, which included lead (OR 2.19; 95%CI 1.29 to 3.71), cadmium (OR 1.81; 95%CI 1.28 to 2.56), mercury (OR 2.23; 95%CI 1.13 to 4.44), and manganese (OR 2.65; 95%CI 1.48 to 4.74), increased risks for CHD significantly. In conclusion, based on the latest evidence, maternal EDC exposure may increase CHD risks in human offspring, especially in heavy metal exposure conditions.

Paclitaxel-Associated Mechanical Sensitivity and Neuroinflammation Are Sex-, Time-, and Site-Specific and Prevented through Cannabigerol Administration in C57Bl/6 Mice.

Chemotherapy-induced peripheral neuropathy (CIPN) is one of the most prevalent and dose-limiting complications in chemotherapy patients. One identified mechanism underlying CIPN is neuroinflammation. Most of this research has been conducted in only male or female rodent models, making direct comparisons regarding the role of sex differences in the neuroimmune underpinnings of CIPN limited. Moreover, most measurements have focused on the dorsal root ganglia (DRG) and/or spinal cord, while relatively few studies have been aimed at characterizing neuroinflammation in the brain, for example the periaqueductal grey (PAG). The overall goals of the present study were to determine (1) paclitaxel-associated changes in markers of inflammation in the PAG and DRG in male and female C57Bl6 mice and (2) determine the effect of prophylactic administration of an anti-inflammatory cannabinoid, cannabigerol (CBG). In Experiment 1, male and female mice were treated with paclitaxel (8-32 mg/kg/injection, Days 1, 3, 5, and 7) and mechanical sensitivity was measured using Von Frey filaments on Day 7 (Cohort 1) and Day 14 (Cohort 2). Cohorts were euthanized on Day 8 or 15, respectively, and DRG and PAG were harvested for qPCR analysis of the gene expression of markers of pain and inflammation Aig1, Gfap, Ccl2, Cxcl9, Tlr4, Il6, and Calca. In Experiment 2, male and female mice were treated with vehicle or 10 mg/kg CBG i.p. 30 min prior to each paclitaxel injection. Mechanical sensitivity was measured on Day 14. Mice were euthanized on Day 15, and PAG were harvested for qPCR analysis of the gene expression of Aig1, Gfap, Ccl2, Cxcl9, Tlr4, Il6, and Calca. Paclitaxel produced a transient increase in potency to produce mechanical sensitivity in male versus female mice. Regarding neuroinflammation, more gene expression changes were apparent earlier in the DRG and at a later time point in the PAG. Also, more changes were observed in females in the PAG than males. Overall, sex differences were observed for most markers at both time points and regions. Importantly, in both the DRG and PAG, most increases in markers of neuroinflammation and pain occurred at paclitaxel doses higher than those associated with significant changes in the mechanical threshold. Two analytes that demonstrated the most compelling sexual dimorphism and that changed more in males were Cxcl9 and Ccl2, and Tlr4 in females. Lastly, prophylactic administration of CBG protected the male and female mice from increased mechanical sensitivity and female mice from neuroinflammation in the PAG. Future studies are warranted to explore how these sex differences may shed light on the mechanisms of CIPN and how non-psychoactive cannabinoids such as CBG may engage these targets to prevent or attenuate the effects of paclitaxel and other chemotherapeutic agents on the nervous system.

Self-validating photothermal and electrochemical dual-mode sensing based on Hg2+ etching Ti3C2 MXene.

Mercury ions can cause serious damage to the ecological environment, and it is necessary to develop reliable and elegant mercury ion sensors. In this protocol, a label-free photothermal/electrochemical dual-mode strategy for Hg2+ is proposed based on delaminated Ti3C2 MXene nanosheets (DL-Ti3C2 MXene). Hg2+ exists in water in the form of HgCl2, Hg(OH)2, and HgClOH, and the electron-rich elements O and Cl can specifically bind to the positively charged DL-Ti3C2 MXene at the edge, and further oxidation-reduction reaction occurs to obtain TiO2/C and Hg2Cl2. In view of the reduction activity and the performance of photothermal conversion of DL-Ti3C2 MXene itself, the electrochemical and photothermal responses decrease with the increase of the logarithm of Hg2+ concentration. The corresponding linear ranges are 50 pmol L-1-500 nmol L-1 and 1 nmol L-1-50 µmol L-1, and their detection limits calculated at 3 S/N are 17.2 pmol L-1 and 0.43 nmol L-1, respectively. DL-Ti3C2 MXene has the characteristics of a wide range of raw materials, low cost, and easy preparation. In addition, the design takes full advantage of the properties of the material itself, avoids the complex assembly and detection process of conventional sensors, and enables high selectivity and sensitivity for mercury detection. In particular, the dual-mode sensing endows self-confirmation of mercury ion detection results, thereby improving the reliability of the sensor.

High-Efficiency and Stable Colloidal One-Dimensional Core/Shell Nanorod Light-Emitting Diodes.

Anisotropic nanocrystals such as nanorods (NRs) display unique linearly polarized emission, which is expected to break the external quantum efficiency (EQE) limit of quantum dot-based light-emitting diodes (LEDs). However, the progress in achieving a higher EQE using NRs encounters several challenges, primarily involving a low photoluminescence quantum yield (PLQY) of NRs and imbalanced charge injection in NR-LEDs. In this work, we investigated NR-LEDs based on CdSe/CdZnS/ZnS rod-in-rod NRs with a high PLQY and higher linear polarization compared to those of dot-in-rod NRs. The balanced charge injection is achieved using ZnMgO nanoparticles as the electron transport layer and poly-TPD {poly[N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine]} as the hole transport layer. Therefore, the NR-LEDs exhibit a maximum EQE of 21.5% and a maximum luminance of >120 000 cd/m2 owing to the high level of in-plane transitions with a dipole moment of 90%. The NR-LEDs also have greatly inhibited droop in EQE under a high current density as well as outstanding operation lifetime and cycle stability.

Programmable Entropy-Driven Circuit-Cascaded Self-Feedback DNAzyme Network for Ultra-Sensitive Fluorescence and Photoelectrochemical Dual-Mode Biosensing.

Inspired by natural DNA networks, programmable artificial DNA networks have become an attractive tool for developing high-performance biosensors. However, there is still a lot of room for expansion in terms of sensitivity, atom economy, and result self-validation for current microRNA sensors. In this protocol, miRNA-122 as a target model, an ultrasensitive fluorescence (FL) and photoelectrochemical (PEC) dual-mode biosensing platform is developed using a programmable entropy-driven circuit (EDC) cascaded self-feedback DNAzyme network. The well-designed EDC realizes full utilization of the DNA strands and improves the atomic economy of the signal amplification system. The unique and rational design of the double-CdSe quantum-dot-released EDC substrate and the cascaded self-feedback DNAzyme amplification network significantly avoids high background signals and enhances sensitivity and specificity. Also, the enzyme-free, programmable EDC cascaded DNAzyme network effectively avoids the risk of signal leakage and enhances the accuracy of the sensor. Moreover, the introduction of superparamagnetic Fe3O4@SiO2-cDNA accelerates the rapid extraction of E2-CdSe QDs and E3-CdSe QDs, which greatly improves the timeliness of sensor signal reading. In addition to the strengths of linear range (6 orders of magnitude) and stability, the biosensor design with dual signal reading makes the test results self-confirming.

Ferrous gluconate triggers ferroptosis in Escherichia coli: Implications of lipid peroxidation and DNA damage.

Microbial ferroptosis has been proved to combat drug-resistant pathogens, but whether this pattern can be applied to the prevention and control of Escherichia coli remains to be further explored. In this study, ferrous gluconate (FeGlu) showed remarkable efficacy in killing E. coli MG1655 with a mortality rate exceeding 99.9%, as well as enterotoxigenic E. coli H10407 (ETEC H10407) and enterohemorrhagic E. coli O157:H7 (EHEC O157:H7). Bacteria death was instigated by the infiltration of Fe2+, accompanied by a burst of intracellular reactive oxygen species (ROS) and lipid peroxidation. Notably, mitigating lipid peroxidation failed to alleviate death of E. coli. Further findings confirmed that FeGlu induced DNA damage, and ΔrecA mutant showed more sensitive, implicating that DNA damage was involved in the death of E. coli. The direct interaction of Fe2+ with DNA was demonstrated by fluorescent staining, gel electrophoresis, and circular dichroism (CD). Moreover, proteomic analysis unveiled 50 differentially expressed proteins (DEPs), including 18 significantly down-regulated proteins and 32 significantly up-regulated proteins. Among them, the down-regulation of SOS-responsive transcriptional suppressor LexA indicated DNA damage induced severely by FeGlu. Furthermore, FeGlu influenced pathways such as fatty acid metabolism (FadB, FadE), iron-sulfur cluster assembly (IscA, IscU, YadR), iron binding, and DNA-binding transcription, along with α-linolenic acid metabolism, fatty acid degradation, and pyruvate metabolism. These pathways were related to FeGlu stress, including lipid peroxidation and DNA damage. In summary, FeGlu facilitated ferroptosis in E. coli through mechanisms involving lipid peroxidation and DNA damage, which presents a new strategy for the development of innovative antimicrobial strategies targeting E. coli infections.

Identification of flavor peptides based on virtual screening and molecular docking from Hypsizygus marmoreuss.

Hypsizygus marmoreuss is an under-explored source of flavor peptides that can enhance the flavor of NaCl or MSG, allowing products to be reformulated in line with reduction policies. This study utilized advanced techniques, including UPLC-Q-TOF MS/MS and molecular docking, to identify H. marmoreuss peptides. Sensory evaluations revealed 10 peptides with pronounced umami flavors and seven with dominantly salty tastes. VLPVPQK scored highest for umami intensity (5.2), and EGNPAHQK for salty intensity (6.2). Further investigation influenced by 0.35 % MSG or 0.35 % NaCl exposed peptides with elevated umami and salty thresholds. LDSPATPEK, VVEGEPSLK, and QKLPEKPER had umami-enhancing thresholds of 0.18, 0.18, and 0.35 mM, while LDSPATPEK and VVEGEPSLK had similar thresholds for salt (0.09 mM). Molecular docking revealed that taste receptor proteins interacted with umami peptides through hydrogen, carbon-hydrogen, alkyl, and van der Waals forces. Specific amino acids in the umami receptor T1R1 had roles in bonding with umami peptides through hydrogen and carbon-hydrogen interactions. In conclusion, molecular docking proved to be an effective and efficient method for flavor peptide screening. Further, this study demonstrated that flavor peptides from H. marmoreuss had the capacity to enhance NaCl and MSG flavours and might be useful tools for reformulation, reducing salt and MSG contents.

Interaction of tetracycline and copper co-intake in inducing antibiotic resistance genes and potential pathogens in mouse gut.

The widespread use of copper and tetracycline as growth promoters in the breeding industry poses a potential threat to environmental health. Nevertheless, to the best of our knowledge, the potential adverse effects of copper and tetracycline on the gut microbiota remain unknown. Herein, mice were fed different concentrations of copper and/or tetracycline for 6 weeks to simulate real life-like exposure in the breeding industry. Following the exposure, antibiotic resistance genes (ARGs), potential pathogens, and other pathogenic factors were analyzed in mouse feces. The co-exposure of copper with tetracycline significantly increased the abundance of ARGs and enriched more potential pathogens in the gut of the co-treated mice. Copper and/or tetracycline exposure increased the abundance of bacteria carrying either ARGs, metal resistance genes, or virulence factors, contributing to the widespread dissemination of potentially harmful genes posing a severe risk to public health. Our study provides insights into the effects of copper and tetracycline exposure on the gut resistome and potential pathogens, and our findings can help reduce the risks associated with antibiotic resistance under the One Health framework.

Uniaxial-Oriented Perovskite Films with Controllable Orientation.

Perovskite films with large crystal size, preferred orientation, and facile fabrication process, combining advantages of single-crystal and polycrystalline films, have gained considerable attention recently. However, there is little research on the facet properties of perovskite films. Here, (111)- and (001)-oriented perovskite films with bandgaps ranging from 1.53 to 1.77 eV, and systematically investigated their orientation-dependent properties are achieved. The (111)-oriented films show electron-dominated traps and the (001)-oriented films show hole-dominated traps, which are related to their atomic arrangement at the surface. Compared with the (001)-oriented films, the (111)-oriented films exhibit lower work function and superior water/oxygen robustness. For the wide-bandgap films, the lattice of the (001)-oriented film provides an unobstructed passage for ion migration. Comparably, the (111)-oriented films exhibit suppressed ion migration and excellent phase stability. The optimized unencapsulated solar cells based on both (001) and (111) orientations show a similar high efficiency of ≈23%. The (111)-oriented solar cell exhibits excellent stability, maintaining 95% of its initial efficiency after 1500 h maximum power point (MPP) tracking test, and 97% initial efficiency after 3000 h aging in ambient conditions. This work paves the way for the rational design, controllable synthesis, and targeted optimization of uniaxial-oriented perovskite films for various electronic applications.

Ferrous sulphate triggers ferroptosis in Candida albicans and cures vulvovaginal candidiasis in a mouse model.

Candida albicans is the most leading cause of life-threatening fungal invasive infections, especially for vulvovaginal candidiasis (VVC). Resistance and tolerance to common fungicide has risen great demands on alternative strategies for treating C. albicans infections. In the present study, ferroptosis has been proven to occur in C. albicans by directly exposed to FeSO4 via induing hallmarks of ferroptosis, including Fe2+ overload burden, ROS eruption and lipid peroxidation. Transcriptomic profile gave the great hints of the possible mechanism for fungal ferroptosis that FeSO4 disturb pathways associated to ribosome, tyrosine metabolism, triglyceride metabolism and thiamine metabolism, thus mobilizing death-related gene synthesis. Inspired by the results, a FeSO4-loaded hydrogel was prepared as an antifungal agent to treat C. albicans infection. This hydrogel exhibited excellent dressing properties and maintained superior antifungal activity by characterization tests. Besides, mice treated by this composite hydrogel displayed excellent therapeutic efficacy. These results highlighted the potential therapeutic use of FeSO4 as an innovative strategy in treating C. albicans infections by targeting ferroptosis.

Effects of intensity-modulated radiotherapy combined with chemotherapy and prognostic factors in patients with locally advanced oesophageal cancer.

PURPOSE: We explored the efficacy and influencing factors of chemoradiotherapy and radiotherapy alone in patients with locally advanced oesophageal squamous cell carcinoma. METHODS: We retrospectively analysed 226 locally advanced oesophageal squamous cell carcinoma patients who underwent chemoradiotherapy and radiotherapy alone. Univariate and multivariate Cox regression analyses were used to analyse the impact of relevant factors. The endpoint was overall survival and progression-free survival. RESULTS: Compared with the radiotherapy group, the chemoradiotherapy group had a significant difference in the overall survival rate and the progression-free survival rate between 3 and 5 years (both p â€‹< â€‹0.05). The incidences of radiation pneumonitis and radiation oesophagitis were analysed, and the differences were not significant (all p â€‹> â€‹0.05). The incidence of haematological toxicity in the chemoradiotherapy group was significantly higher than that in the radiotherapy group (p â€‹= â€‹0.001). There was a significant difference in the incidence of haematological toxicity between the ≤65 and the >65 age groups (p â€‹< â€‹0.05). Tumour location, T stage, tumour length, tumour target volume, and short-term curative effect were the main factors affecting the prognosis (all p â€‹< â€‹0.05). T stage, gross tumour volume, and short-term curative effect were all independent factors affecting the prognosis (all p â€‹< â€‹0.05). CONCLUSIONS: Patients with locally advanced oesophageal cancer who received intensity-modulated radiotherapy (IMRT) combined with chemotherapy had significant survival benefits compared with radiotherapy alone. Haematological toxicity was the main adverse reaction. T-stage, gross tumour volume and short-term curative effect were independent factors influencing the prognosis.

Allelic variation in the autotetraploid potato: genes involved in starch and steroidal glycoalkaloid metabolism as a case study.

BACKGROUND: Tuber starch and steroidal glycoalkaloid (SGA)-related traits have been consistently prioritized in potato breeding, while allelic variation pattern of genes that underlie these traits is less explored. RESULTS: Here, we focused on the genes involved in two important metabolic pathways in the potato: starch metabolism and SGA biosynthesis. We identified 119 genes consisting of 81 involved in starch metabolism and 38 in the biosynthesis of steroidal glycoalkaloids, and discovered 96,166 allelic variants among 2,169 gene haplotypes in six autotetraploid potato genomes. Comparative analyses revealed an uneven distribution of allelic variants among gene haplotypes and that the vast majority of deleterious mutations in these genes are retained in heterozygous state in the autotetraploid potato genomes. Leveraging full-length cDNA sequencing data, we find that approximately 70% of haplotypes of the 119 genes are transcribable. Population genetic analyses identify starch and SGA biosynthetic genes that are potentially conserved or diverged between potato varieties with varying starch or SGA content. CONCLUSIONS: These results deepen the understanding of haplotypic diversity within functionally important genes in autotetraploid genomes and may facilitate functional characterization of genes or haplotypes contributing to traits related to starch and SGA in potato.