Insights into dynamic structural evolution and its sodium storage mechanisms of P2/P3 composite cathode materials for sodium-ion batteries.

Cobalt substitution for manganese sites in Na0.44MnO2 initiates a dynamic structural evolution process, yielding a composite cathode material comprising intergrown P2 and P3 phases. The novel P2/P3 composite cathode exhibits a reversible phase transition process during Na+ extraction/insertion, showcasing its attractive battery performance in sodium-ion batteries.

Interfacial Spinel Local Interlocking Strategy Toward Structural Integrity in P3 Oxide Cathodes.

P3-layered transition oxide cathodes have garnered considerable attention owing to their high initial capacity, rapid Na+ kinetics, and less energy consumption during the synthesis process. Despite these merits, their practical application is hindered by the substantial capacity degradation resulting from unfavorable structural transformations, Mn dissolution and migration. In this study, we systematically investigated the failure mechanisms of P3 cathodes, encompassing Mn dissolution, migration, and the irreversible P3-O3' phase transition, culminating in severe structural collapse. To address these challenges, we proposed an interfacial spinel local interlocking strategy utilizing P3/spinel intergrowth oxide as a proof-of-concept material. As a result, P3/spinel intergrowth oxide cathodes demonstrated enhanced cycling performance. The effectiveness of suppressing Mn migration and maintaining local structure of interfacial spinel local interlocking strategy was validated through depth-etching X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and in situ synchrotron-based X-ray diffraction. This interfacial spinel local interlocking engineering strategy presents a promising avenue for the development of advanced cathode materials for sodium-ion batteries.

Developing an abnormal high-Na-content P2-type layered oxide cathode with near-zero-strain for high-performance sodium-ion batteries.

Layered transition metal oxides (NaxTMO2) possess attractive features such as large specific capacity, high ionic conductivity, and a scalable synthesis process, making them a promising cathode candidate for sodium-ion batteries (SIBs). However, NaxTMO2 suffer from multiple phase transitions and Na+/vacancy ordering upon Na+ insertion/extraction, which is detrimental to their electrochemical performance. Herein, we developed a novel cathode material that exhibits an abnormal P2-type structure at a stoichiometric content of Na up to 1. The cathode material delivers a reversible capacity of 108 mA h g-1 at 0.2C and 97 mA h g-1 at 2C, retaining a capacity retention of 76.15% after 200 cycles within 2.0-4.3 V. In situ diffraction studies demonstrated that this material exhibits an absolute solid-solution reaction with a low volume change of 0.8% during cycling. This near-zero-strain characteristic enables a highly stabilized crystal structure for Na+ storage, contributing to a significant improvement in battery performance. Overall, this work presents a simple yet effective approach to realizing high Na content in P2-type layered oxides, offering new opportunities for high-performance SIB cathode materials.

Role of TGF-ß3 in modulating inflammatory responses and wound healing processes in ischemic ulcers in atherosclerotic patients.

Ischemic ulcers pose a multifaceted clinical dilemma for patients with atherosclerosis, frequently compounded by suboptimal wound healing mechanisms. The dual function of Transforming Growth Factor Beta 3 (TGF-ß3) in ischemic ulcer healing is not fully comprehended, despite its involvement in modulating inflammatory responses and tissue regeneration. The main aim of this investigation was to clarify the functions and mechanisms by which TGF-ß3 regulates inflammatory responses and promotes wound healing in patients with ischemic ulcers who have atherosclerosis. Between August 2022 and November 2023, this cross-sectional investigation was conducted on 428 patients diagnosed with atherosclerotic ischemic ulcers in Haikou, China. The expression and function of TGF-ß3 were examined throughout the different stages of wound healing, including inflammation, proliferation and remodelling. In addition to documenting patient demographics and ulcer characteristics, an analysis was conducted on biopsy samples to determine the expression of TGF-ß3, pro-inflammatory and anti-inflammatory markers. A subset of patients were administered topical TGF-ß3 in order to evaluate its therapeutic effects. The expression pattern of TGF-ß3 was found to be stage-dependent and significant, exhibiting increased levels during the phase of inflammation and reduced activity in subsequent phases. TGF-ß3 levels were found to be greater in ulcers that were larger and deeper, especially in inflammatory phase. TGF-ß3 applied topically induced discernible enhancement in ulcer healing parameters, such as reduction in ulcer depth and size. The therapeutic significance of TGF-ß3 was emphasised due to its twofold function of regulating the inflammatory environment and facilitating the regeneration of damaged tissues. Ischemic ulcer lesion healing is significantly influenced by TGF-ß3, which functions as an anti-inflammatory and pro-inflammatory mediator. Its correlation with ulcer characteristics and stages of healing suggests that it may have utility as a targeted therapeutic agent.

Nickel Nanoparticles Protruding from Molybdenum Carbide Micropillars with Carbon Layer-Protected Biphasic 0D/1D Heterostructures for Efficient Water Splitting.

It remains a tremendous challenge to achieve high-efficiency bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) for hydrogen production by water splitting. Herein, a novel hybrid of 0D nickel nanoparticles dispersed on the one-dimensional (1D) molybdenum carbide micropillars embedded in the carbon layers (Ni/Mo2C@C) was successfully prepared on nickel foam by a facile pyrolysis strategy. During the synthesis process, the nickel nanoparticles and molybdenum carbide were simultaneously generated under H2 and C2H2 mixed atmospheres and conformally encapsulated in the carbon layers. Benefiting from the distinctive 0D/1D heterostructure and the synergistic effect of the biphasic Mo2C and Ni together with the protective effect of the carbon layer, the reduced activation energy barriers and fast catalytic reaction kinetics can be achieved, resulting in a small overpotential of 96 mV for the HER and 266 mV for the OER at the current density of 10 mA cm-2 together with excellent durability in 1.0 M KOH electrolyte. In addition, using the developed Ni/Mo2C@C as both the cathode and anode, the constructed electrolyzer exhibits a small voltage of 1.55 V for the overall water splitting. The novel designed Ni/Mo2C@C may give inspiration for the development of efficient bifunctional catalysts with low-cost transition metal elements for water splitting.

Facilitating Layered Oxide Cathodes Based on Orbital Hybridization for Sodium-Ion Batteries: Marvelous Air Stability, Controllable High Voltage, and Anion Redox Chemistry.

Layered oxides have become the research focus of cathode materials for sodium-ion batteries (SIBs) due to the low cost, simple synthesis process, and high specific capacity. However, the poor air stability, unstable phase structure under high voltage, and slow anionic redox kinetics hinder their commercial application. In recent years, the concept of manipulating orbital hybridization has been proposed to simultaneously regulate the microelectronic structure and modify the surface chemistry environment intrinsically. In this review, the hybridization modes between atoms in 3d/4d transition metal (TM) orbitals and O 2p orbitals near the region of the Fermi energy level (EF) are summarized based on orbital hybridization theory and first-principles calculations as well as various sophisticated characterizations. Furthermore, the underlying mechanisms are explored from macro-scale to micro-scale, including enhancing air stability, modulating high working voltage, and stabilizing anionic redox chemistry. Meanwhile, the origin, formation conditions, and different types of orbital hybridization, as well as its application in layered oxide cathodes are presented, which provide insights into the design and preparation of cathode materials. Ultimately, the main challenges in the development of orbital hybridization and its potential for the production application are also discussed, pointing out the route for high-performance practical sodium layered oxide cathodes.

An Intrinsic Stable Layered Oxide Cathode for Practical Sodium-Ion Battery: Solid Solution Reaction, Near-Zero-Strain and Marvelous Water Stability.

Non-aqueous solvents, in particular N,N-dimethylaniline (NMP), are widely applied for electrode fabrication since most sodium layered oxide cathode materials are readily damaged by water molecules. However, the expensive price and poisonousness of NMP unquestionably increase the cost of preparation and post-processing. Therefore, developing an intrinsically stable cathode material that can implement the water-soluble binder to fabricate an electrode is urgent. Herein, a stable nanosheet-like Mn-based cathode material is synthesized as a prototype to verify its practical applicability in sodium-ion batteries (SIBs). The as-prepared material displays excellent electrochemical performance and remarkable water stability, and it still maintains a satisfactory performance of 79.6% capacity retention after 500 cycles even after water treatment. The in situ X-ray diffraction (XRD) demonstrates that the synthesized material shows an absolute solid-solution reaction mechanism and near-zero-strain. Moreover, the electrochemical performance of the electrode fabricated with a water-soluble binder shows excellent long-cycling stability (67.9% capacity retention after 500 cycles). This work may offer new insights into the rational design of marvelous water stability cathode materials for practical SIBs.

Sodium Layered/Tunnel Intergrowth Oxide Cathodes: Formation Process, Interlocking Chemistry, and Electrochemical Performance.

Manganese-based layered oxides are prospective cathode materials for sodium-ion batteries (SIBs) due to their low cost and high theoretical capacities. The biphasic intergrowth structure of layered cathode materials is essential for improving the sodium storage performance, which is attributed to the synergistic effect between the two phases. However, the in-depth formation mechanism of biphasic intergrowth materials remains unclear. Herein, the layered/tunnel intergrowth Na0.6MnO2 (LT-NaMO) as a model material was successfully prepared, and their formation processes and electrochemical performance were systematically investigated. In situ high-temperature X-ray diffraction displays the detailed evolution process and excellent thermal stability of the layered/tunnel intergrowth structure. Furthermore, severe structural strain and large lattice volume changes are significantly mitigated by the interlocking effect between the phase interfaces, which further enhances the structural stability of the cathode materials during the charging/discharging process. Consequently, the LT-NaMO cathode displays fast Na+ transport kinetics with a remarkable capacity retention of ∼70.5% over 300 cycles at 5C, and its assembled full cell with hard carbon also exhibits high energy density. These findings highlight the superior electrochemical performance of intergrowth materials due to interlocking effects between layered and tunnel structures and also provide unique insights into the construction of intergrowth cathode materials for SIBs.

Soft-Rigid Heterostructures with Functional Cation Vacancies for Fast-Charging and High-Capacity Sodium Storage.

Optimizing charge transfer and alleviating volume expansion in electrode materials are critical to maximize electrochemical performance for energy-storage systems. Herein, an atomically thin soft-rigid Co9 S8 @MoS2 core-shell heterostructure with dual cation vacancies at the atomic interface is constructed as a promising anode for high-performance sodium-ion batteries. The dual cation vacancies involving VCo and VMo in the heterostructure and the soft MoS2 shell afford ionic pathways for rapid charge transfer, as well as the rigid Co9 S8 core acting as the dominant active component and resisting structural deformation during charge-discharge. Electrochemical testing and theoretical calculations demonstrate both excellent Na+ -transfer kinetics and pseudocapacitive behavior. Consequently, the soft-rigid heterostructure delivers extraordinary sodium-storage performance (389.7 mA h g-1 after 500 cycles at 5.0 A g-1 ), superior to those of the single-phase counterparts: the assembled Na3 V2 (PO4 )3 ||d-Co9 S8 @MoS2 /S-Gr full cell achieves an energy density of 235.5 Wh kg-1 at 0.5 C. This finding opens up a unique strategy of soft-rigid heterostructure and broadens the horizons of material design in energy storage and conversion.

A Universal Strategy Based on Bridging Microstructure Engineering and Local Electronic Structure Manipulation for High-Performance Sodium Layered Oxide Cathodes.

Due to their high capacity and sufficient Na+ storage, O3-NaNi0.5Mn0.5O2 has attracted much attention as a viable cathode material for sodium-ion batteries (SIBs). However, the challenges of complicated irreversible multiphase transitions, poor structural stability, low operating voltage, and an unstable oxygen redox reaction still limit its practical application. Herein, using O3-NaNi0.5Mn0.5-xSnxO2 cathode materials as the research model, a universal strategy based on bridging microstructure engineering and local electronic structure manipulation is proposed. The strategy can modulate the physical and chemical properties of electrode materials, so as to restrain the unfavorable and irreversible multiphase transformation, improve structural stability, manipulate redox potential, and stabilize the anion redox reaction. The effect of Sn substitution on the intrinsic local electronic structure of the material is articulated by density functional theory calculations. Meanwhile, the universal strategy is also validated by Ti substitution, which could be further extrapolated to other systems and guide the design of cathode materials in the field of SIBs.

A strategy for anode modification for future zinc-based battery application.

In the past several years, rechargeable zinc batteries, featuring the merits of low cost, environmental friendliness, easy manufacturing, and enhanced safety, have, attracted much attention. Zinc (Zn) anodes for zinc metal batteries play an important role. In this review, the fundamental understanding of these batteries and modification strategies to deal with the problematic issues for Zn anodes, including dendrite growth, corrosion, and the hydrogen evolution phenomenon will be summarized. The practical application of Zn anodes can still lead to Zn dendrites, various side reactions, and serious safety risks. Therefore, metal-free anodes for "rocking chair" zinc ion batteries to replace Zn anodes are systemically reviewed. The performance and the zinc storage mechanism of metal-free anodes will be discussed. Subsequently, a "rocking chair" zinc ion battery prototype selected as a recent example is assessed to explore the merits and demerits of Zn anodes and metal-free anodes. To conclude, a perspective on the future of zinc metal batteries and "rocking chair" zinc ion batteries is presented. It is hoped that this review may provide for further improvement of commercial rechargeable zinc batteries.

[Black microplastics in the environment: Origin, transport and risk of tire wear particles]. / 环境中的黑色微塑料­­è½®èƒŽç£¨æŸé¢—粒的来源、迁移扩散及环境风险.

With the continuous growth of vehicle per capita in recent years, tire wear particles (TWP) produced by tire wear on roads have been widely found in various environmental media, whose environmental behavior and effects have attracted extensive attention. After being produced, these microsized and nanosized TWP will drift into the atmosphere or enter the surrounding soil, rivers, and even into the ocean with rain and runoff. The existence of TWP significantly affects the composition of organic materials in the environment. Meanwhile, the release of heavy metals and organic additives from TWP will be harmful to organisms and human health. We summarized the sources and characteristics of TWP, their migration and diffusion in water, atmosphere, and soil environment. By analyzing the environmental impacts and ecological risks of TWP pollution, we proposed the key questions urgently to be solved and prevention measures.

Formulating High-Rate and Long-Cycle Heterostructured Layered Oxide Cathodes by Local Chemistry and Orbital Hybridization Modulation for Sodium-Ion Batteries.

It is still very urgent and challenging to simultaneously develop high-rate and long-cycle oxide cathodes for sodium-ion batteries (SIBs) because of the sluggish kinetics and complex multiphase evolution during cycling. Here, the concept of accurately manipulating structural evolution and formulating high-performance heterostructured biphasic layered oxide cathodes by local chemistry and orbital hybridization modulation is reported. The P2-structure stoichiometric composition of the cathode material shows a layered P2- and O3-type heterostructure that is explicitly evidenced by various macroscale and atomic-scale techniques. Surprisingly, the heterostructured cathode displays excellent rate performance, remarkable cycling stability (capacity retention of 82.16% after 600 cycles at 2 C), and outstanding compatibility with hard carbon anode because of the integrated advantages of intergrowth structure and local environment regulation. Meanwhile, the formation process from precursors during calcination and the highly reversible dynamic structural evolution during the Na+ intercalation/deintercalation process are clearly articulated by a series of in situ characterization techniques. Also, the intrinsic structural properties and corresponding electrochemical behavior are further elucidated by the density of states and electron localization function of density functional theory calculations. Overall, this strategy, which finely tunes the local chemistry and orbitals hybridization for high-performance SIBs, will open up a new field for other materials.

CkREV Enhances the Drought Resistance of Caragana korshinskii through Regulating the Expression of Auxin Synthetase Gene CkYUC5.

As a common abiotic stress, drought severely impairs the growth, development, and even survival of plants. Here we report a transcription factor, Caragana korshinskii REVOLUTA(CkREV), which can bidirectionally regulate the expression of the critical enzyme gene CkYUC5 in auxin synthesis according to external environment changes, so as to control the biosynthesis of auxin and further enhance the drought resistance of plants. Quantitative analysis reveals that the expression level of both CkYUC5 and AtYUC5 is down-regulated after C. korshinskii and Arabidopsis thaliana are exposed to drought. Functional verification of CkREV reveals that CkREV up-regulates the expression of AtYUC5 in transgenic A. thaliana under common conditions, while down-regulating it under drought conditions. Meanwhile, the expression of CkYUC5 is also down-regulated in C. korshinskii leaves instantaneously overexpressing CkREV. We apply a dual-luciferase reporter system to discover that CkREV can bind to the promoter of CkYUC5 to regulate its expression, which is further proved by EMSA and Y1H esxperiments. Functional verification of CkREV in C. korshinskii and transgenic A. thaliana shows that CkREV can regulate the expression of CkYUC5 and AtYUC5 in a contrary way, maintaining the equilibrium of plants between growth and drought resisting. CkREV can positively regulate the expression of CkYUC5 to promote auxin synthesis in favor of growth under normal development. However, CkREV can also respond to external signals and negatively regulate the expression of CkYUC5, which inhibits auxin synthesis in order to reduce growth rate, lower water demands, and eventually improve the drought resistance of plants.

Icariside II Attenuates Vascular Remodeling Via Wnt7b/CCND1 Axis.

ABSTRACT: Angioplasty often fails due to the abnormal proliferation of vascular smooth muscle cells (VSMCs). Success rates of angioplasty may increase following the administration of an agent that effectively ameliorates aberrant vascular remodeling. Icariside II (ICS-II) is a natural flavonol glycoside extract from the Chinese herbal medicine Epimedii that possesses several medicinal qualities that are beneficial in humans. Nevertheless, the role of ICS-II in addressing aberrant vascular remodeling have yet to be clarified. The current investigation studies the molecular effects of ICS-Ⅱ on balloon-inflicted neointimal hyperplasia in rats in vivo and on platelet-derived growth factor-induced vascular proliferation in primary rat aortic smooth muscle cells (VSMCs) in vitro. ICS-II was found to be as effective as rapamycin, the positive control used in this study. ICS-II inhibited neointimal formation in injured rat carotid arteries and notably reduced the expression of Wnt7b. ICS-Ⅱ significantly counteracted platelet-derived growth factor-induced VSMCs proliferation. Cell cycle analysis showed that ICS-II triggered cell cycle arrest during the G1/S transition. Western blot analysis further indicated that this cell cycle arrest was likely through Wnt7b suppression that led to CCND1 inhibition. In conclusion, our findings demonstrate that ICS-II possesses significant antiproliferative qualities that counteracts aberrant vascular neointimal hyperplasia. This phenomenon most likely occurs due to the suppression of the Wnt7b/CCND1 axis.

Reduced antioxidant and anti-inflammatory effects of propofol at high-dose on morbidly obese patients.

This study was aimed to investigate differences in antioxidant and anti-inflammatory effects of propofol at two commonly used dosing schedules on morbidly obese patients. Twenty-two morbidly obese patients were randomly divided into two groups, namely, TBW (dosing based on total body weight) and LBW (dosing based on lean body weight) groups. Three biomarkers, i.e. superoxide dismutase (SOD), malondialdehyde (MDA) and nitric oxide (NO) were measured as indicators of the level of oxidation stress reaction. Pro-inflammatory cytokines including Interleukin-6 (IL-6) and Interleukin-8 (IL-8) were used to describe the degree of inflammation. Plasma levels of SOD, MDA and NO were increased and reached a peak value 0.5h after anesthesia induction, but the increase was smaller in the LBW group compared with the TBW group. Besides, plasma concentrations of IL-6 and IL-8 were also increased and attained a peak level 0.5h after anesthesia induction, but the increase was higher in the TBW group compared with the LBW group. The LBW-based dosing of propofol had more potent antioxidant and anti-inflammatory effects than the TBW-based dosing during anesthesia induction period on morbidly obese patients. This study provided a dosing recommendation of propofol for morbidly obese patients.

Deformation Assessment of the Manually Pre-Bent Titanium Miniplates in Orthognathic Surgery With Finite Element Analysis.

ABSTRACT: This study summarized the literature regarding the application of pre-bent titanium miniplates in orthognathic surgery and evaluated the extra deformation of the manually pre-bent titanium miniplates via finite element analysis for acquiring higher surgical accuracy. The literature was reviewed with a chart. Three models of titanium miniplates with different thicknesses (1.0 mm, 0.8 mm, 0.6 mm) were created using COMSOL Multiphysics software for biomechanical behavior analysis. The 3 models were virtually bent into 5 angles (15 degree, 30 degree, 45 degree, 60 degree, 80 degree). respectively to simulate the preoperative virtual bending, then to simulate the practical manual bending via finite element analysis. The stresses and displacements of these models were recorded. The models from virtual bending simulation and manual bending simulation were registered to analyze the deviations. The results showed that the maximum stress and the displacement deviations between the virtual bending models and the manual bending models increased with the thickness and bending angle of the pre-bent miniplate models. To improve the surgical accuracy, measures should be applied to the manually pre-bent titanium miniplates to reduce the extra deformation when the plate being thicker and the bending angle being larger.

[Influence of vitexin on the expression of inflammatory cytokines in dental pulp stem cells induced by lipopolysaccharide].

PURPOSE: To investigate the effect of vitexin (VTX) on the expression of inflammatory cytokines in human dental pulp stem cells(hDPSCs) induced by lipopolysaccharide(LPS), and to explore the underlying mechanism. METHODS: hDPSCs were isolated and cultured, and CCK-8 method was used to detect the effect of VTX on proliferation of hDPSCs. hDPSCs were randomly divided into 4 groups: blank group (without LPS and VTX)，LPS group (2 µg/mL LPS)，2 µg/mL LPS + 25 µmol/L VTX，2 µg/mL LPS + 50 µmol/L VTX. The cells of all groups were cultured for 48 h. The gene levels of IL-1ß， IL-6 and IL-8 in hDPSCs were detected by real time qPCR(RT-qPCR). The change of COX-2 and MAPKs signaling pathways were detected by Western blot. SPSS 16.0 software package was used for statistical analysis. RESULTS: When the VTX concentration was less than 200 µmol/L, the cell viability was not affected(P>0.05). VTX at 25 and 50 µmol/L significantly reduced LPS-induced expression of IL-1ß, IL-6 and IL-8 at gene levels and COX-2 at protein level (P<0.05). CONCLUSIONS: VTX significantly inhibited the activation of ERK and p38 signaling pathway. VTX can reduce LPS-induced inflammatory cytokine expression in hDPSCs via restraining the activation of ERK and p38 signaling pathway.

[Pharmacokinetics of a cisatracurium dose according to fat-free mass for anesthesia induction in morbidly obese patients].

OBJECTIVE: To compare the pharmacokinetics of cisatracurium between normal weight patients and morbidly obese patients. METHODS: Twelve obese ASA I-II patients (BMI≥35 kg/m2) undergoing laparoscopic Roux-en-Y gastric bypass and 12 normal weight ASA I-II patients (BMI of 18.5-24 kg/m2) undergoing laparoscopic surgery were enrolled. The obese patients were given a cisatracurium dose of 0.15 mg/kg according to the fat-free mass (FFM), and the non-obese patients received a dose of 0.15 mg/kg according to the total body weight. Plasma concentrations of cisatracurium was monitored in the patients with high-performance liquid chromatography (HPLC) before anesthetic induction and at 1, 2, 4, 6, 8, 10, 12, 15, and 20 min after cisatracurium administration and the pharmacokinetic parameters were computed. SBP, DBP, HR, MAP, SpO2 and PetCO2 were recorded before anesthetic induction (T0) and at 1 min (T1), 2 min (T2), 4 min (T3) after cisatracurium administration. RESULTS: Compared with those measured at T0, SBP, DBP and MAP in the 2 groups were significantly decreased at the time points of T1-3 (P<0.05). Compared with the non-obese patients, the obese patients showed significantly increased Hct level (P<0.05). The total clearance, apparent volume of distribution, and distribution and elimination half-life of the drug were similar between the 2 groups (P>0.05). The plasma concentration of cisatracurium at T1-2 was significantly decreased in the obese patients compared with that in the non-obese patients (P<0.05). CONCLUSION: Cisatracurium doses according to fat-free mass is clinically reasonable for inducing anesthesia in morbidly obese patients, but due to a prolonged muscle relax onset time, the timing of tracheal intubation should be delayed by 1-2 min.

SS1 (NAL1)- and SS2-Mediated Genetic Networks Underlying Source-Sink and Yield Traits in Rice (Oryza sativa L.).

Source leaf/sink capacity (SS) traits are important determinants of grain yield (GY) of rice. To understand the genetic basis of the SS relationship in rice, five SS and GY traits of rice were genetically dissected using two reciprocal introgression populations. Seventy-three QTL affecting the SS and GY traits were identified, most of which were detected in one of the parental genetic backgrounds (GBs). Two major QTL at bins 4.7 (SS1) and 3.12 (SS2) were associated consistently with all measured SS and yield traits in both GBs across two contrasting environments. Strong interactions between SS1/SS2 and the detected QTL led us to the discovery of genetic networks affecting the SS and GY traits. The SS1 acted as a regulator controlling two groups of downstream QTL affecting the source leaf width and grain number per panicle (GNP). SS2 functioned as a regulator positively regulating different groups of downstream QTL affecting the source leaf length, GNP, grain weight, and GY. Map-based cloning of SS1 indicates that SS1 is NAL1 involved in polar auxin/IAA transport. Different alleles at NAL1 were apparently able to qualitatively and/or quantitatively control the IAA transport from the apical meristem to different plant tissues and thus regulate those downstream loci/pathways controlling different SS traits of rice. There was a functional allele and a non-functional mutation in the parents at each of the QTL downstream of SS1 or SS2, which were detectable only in the presence of the functional allele of SS1 or SS2. Our results provided direct evidence that SS and yield traits in rice are controlled by complex signaling pathways and suggest further improvement of rice yield potential with enhanced and balanced SS relationships can be achieved by accurately manipulating allelic combinations at loci in the SS1 and SS2 mediated pathways.