RESUMO
Polymer-based actuators have gained extensive attention owing to their potential applications in aerospace, soft robotics, etc. However, poor mechanical properties, the inability of multi-stimuli response and programmable deformation, and the costly fabrication procedure have significantly hindered their practical application. Herein, these issues are overcome via a simple and scalable one-step molding method. The actuator is fabricated by hot-pressing commercial unidirectional carbon fiber/epoxy prepregs with a commodity PC membrane. Notable CTE differences between the CF and PC layers endow the bilayer actuator with fast and reliable actuation deformation. Benefiting from the high strength of CF, the actuator exhibits excellent mechanical performance. Moreover, the anisotropy of CF endows the actuator with design flexibility. Furthermore, the multifunction of CF makes the actuator capable of responding to thermal, optical, and electrical stimulation simultaneously. Based on the bilayer actuator, we successfully fabricated intelligent devices such as light-driven biomimetic flowers, intelligent grippers, and gesture-simulating apparatuses, which further validate the programmability and multi-stimuli response characteristics of this actuator. Strikingly, the prepared gripper possesses a grasping capacity approximately 31.2 times its own weight. It is thus believed that the concept presented paves the way for building next-generation robust robotics.
RESUMO
Objective: Brucellosis is a serious public health issue in Qinghai (QH), China. Surveying the seroprevalence and isolation of B. abortus strains from marmots is key to understanding the role of wildlife in the maintenance and spread of brucellosis. Methods: In this study, a set of methods, including a serology survey, bacteriology, antibiotic susceptibility, molecular genotyping (MLST and MLVA), and genome sequencing, were employed to characterize the two B. abortus strains. Results: The seroprevalence of brucellosis in marmots was 7.0% (80/1146) by serum tube agglutination test (SAT); one Brucella strain was recovered from these positive samples, and another Brucella strain from a human. Two strains were identified as B. abortus bv. 1 and were susceptible to all eight drugs examined. The distribution patterns of the accessory genes, virulence associated genes, and resistance genes of the two strains were consistent, and there was excellent collinearity between the two strains on chromosome I, but they had significant SVs in chromosome II, including inversions and translocations. MLST genotyping identified two B. abortus strains as ST2, and MLVA-16 analysis showed that the two strains clustered with strains from northern China. WGS-SNP phylogenetic analysis showed that the strains were genetically homogeneous with strains from the northern region, implying that strains from a common lineage were spread continuously in different regions and hosts. Conclusion: Seroprevalence and molecular clues demonstrated frequent direct or indirect contact between sheep/goats, cattle, and marmots, implying that wildlife plays a vital role in the maintenance and spread of B. abortus in the Qinghai-Tibet Plateau.
RESUMO
BACKGROUND: Leeches are an integral component of aquatic biocenosis and can be found in a wide range of ecosystems such as freshwater, saltwater, flowing, and still-water ecosystems. It especially plays an important role in the freshwater benthic community and is an important part of the food web. In this study, a leech species was found in the mantle cavity of wild freshwater mussels in Zigong City, Sichuan Province, China, and its identity was determined through morphological analysis and molecular biological analysis. RESULTS: The leech is Hemiclepsis khankiana, a new species of Hemiclepsis that has been discovered in Russia in recent years. Through morphological analysis, the current survey observed that the morphological characteristics of Hemiclepsis khankiana eyespots were significantly different from the first reported description. The first pair of eyespots on the leech were separated and clear, while it had been reduced to unclear shadows in the previous report. The phylogenetic tree based on the COI gene showed that the COI gene sequence obtained in this study was in the same evolutionary branch as Hemiclepsis khankiana (MN295420, MN295421). Genetically, it was most closely related to Hemiclepsis kasmiana (mean COI p-distance = 3.98%). CONCLUSIONS: The current study reported on the new distribution range of Hemiclepsis khankiana, which was initially discovered in China. This study indicates that the distribution range of the leech species has expanded, laying a foundation for further studies in China.
Assuntos
Ecossistema , Sanguessugas , Animais , Filogenia , Sanguessugas/genética , Evolução Biológica , ChinaRESUMO
Since 2010, the cases and incidences of human brucellosis have been increasing annually in Qinghai (QH) Province. Molecular epidemiology and phylogenetic analyses of strains from this region are crucial to better understand the transmission of the disease and the evolutionary patterns of Brucella strains. In this study, classical bio-typing assay, multilocus variable-number tandem repeat analysis, and the whole-genome sequencing-single-nucleotide polymorphism approach were used to illustrate the epidemiological and evolutionary patterns of Brucella melitensis. A total of 54 B. melitensis bv. 3 strains were isolated and molecularly characterized, with all strains belonging to the East Mediterranean lineages. Cross-regional transmission events (i.e., between counties) were caused by common sources of infection, suggesting that predominant circulating genotypes are endemic in different regions. Strengthening surveillance in animal brucellosis and controlling infected animals' cross-border movement are necessary. Two strains isolated from humans and marmots were clustered in the same sub-clade, implying the possible existence of direct and/or indirect contact between sheep (and goats) and wildlife (marmots), but this needs to be verified by further investigations. The global-scale phylogenetic analysis indicated that 54 strains sorted into six subclades, four of which formed independent lineages, suggesting that the increase in the incidence rate of human brucellosis may be caused by local circulating lineages. Further strengthening the serology and pathogen surveillance of animals (wildlife) and humans will contribute to an in-depth understanding of the transmission chain of human brucellosis in this region.
RESUMO
OBJECTIVE: To observe the effect of electroacupuncture (EA) pretreatment at "Quchi "(LI11) and "Xuehai "(SP10) on expression of interleukin (IL)-33, suppression of tumorigenicity 2 (ST2) and mast cell degranulation in sensitive area of skin tissue in rats with urticaria, so as to explore its mechanisms underlying prevention of urticaria. METHODS: A total of 32 male SD rats were randomly divided into blank control, model, EA preconditioning and medication groups, with 8 rats in each group. The urticaria model was established by topical injection of the prepared anti-ovalbumin serum (foreign serum, 0.1 mL/spot) along the bilateral sides of the spinal column on the back, followed by injection of mixture solution of ovalbumin, 0.5% evans blue and normal saline via the tail vein 48 h later. EA intervention (2 Hz/15 Hz, 1 mA) was applied to bilateral LI11 and SP10 for 20 min, once daily for 7 d before modeling.Back sensitization was started from the 5th day on. Rats of the medication group received gavage of loratadine, and those of the model group received gavage of the same volume of normal saline. The diameter of evans blue spots at the back skin tissue was measured; the histopathological changes of the blue spot tissues were observed by light microscope after H.E. staining. The state of degranulation of mast cells in the subcutaneous loose connective tissue was observed by using toluidine blue staining. Serum IgE and histamine contents were detected by ELISA, and the immunoactivity of IL-33 and ST2 in the skin and subcutaneous tissues of the sensitized spots (evans blue exudation spots) was observed by immunohistochemistry. RESULTS: Compared with the blank control group, the diameter of evans blue spot, degranulation rate of mast cells, serum IgE and histamine contents, and the immunoactivity of IL-33 and ST2 in the evans blue exudation spot tissues were significantly increased in the model group (P<0.01). In comparison with the model group, the increase of the above-mentioned indexes was reversed in both EA and medication groups (P<0.01ï¼P<0.05). No significant differences were found between the EA and medication groups in down-regulating the levels of the 6 indexes. H.E. staining of the blue spot tissues of rats in the model group showed incomplete structure of the epidermal layer of the skin, unclear interface of tissues, incomplete keratinization, chaotic epidermal cells, disorderly arrangement of fibers in the dermis, and infiltration of inflammatory cells and edema, which was relatively milder in the EA and medication groups. CONCLUSION: EA preconditioning can prevent urticaria (reduce size and sensitive reactions) in rats, which may be associated with its functions in lowering the level of IgE through inhibiting IL-33 and ST2.
Assuntos
Terapia por Acupuntura , Eletroacupuntura , Urticária , Ratos , Masculino , Animais , Ratos Sprague-Dawley , Mastócitos , Proteína 1 Semelhante a Receptor de Interleucina-1 , Histamina , Azul Evans , Interleucina-33/genética , Solução Salina , Urticária/genética , Urticária/terapia , Imunoglobulina E , Pontos de Acupuntura , Receptores de Interleucina-1RESUMO
OBJECTIVE: To observe the effect of electroacupuncture (EA) preconditioning of "Quchi" (LI11) and "Xuehai" (SP10) on mast cell (MC) degranulation, and expressions of inositol triphosphate(IP3), reactive oxygen species (ROS), transient receptor potential (TRP) M2, calmodulin (CaM) in rats with urticaria, so as to reveal its molecular mechanism under-lying improving urticaria. METHODS: Thirty-two male SD rats were randomly divided into blank control, model, preconditioning of EA (Pre-EA) and medication groups (n=8 rats/group). The urticaria model was established by intradermal injection of dilute allogeneic antioalbumin serum at the spots of the bilateral symmetry of the spine on the back, and followed by tail venous injection of mixture solution of egg albumin diluent, plus 0.5% Evans blue and normal saline. Ten days before the end of modeling, rats of the pre-EA group received EA stimulation of LI11 and SP10 for 20 min, once a day for 10 consecutive days, and those of the medication group received gavage of loratadine tablets diluted solution (1 mg/kg) once a day for 10 days. The times of rat's scratching the sensitized skin were recorded, the diameter of the sensitized blue spots was measured and the degranulation rate of skin MCs was counted under microscope after toluidine blue staining. The expression levels of IP3, ROS, TRPM2 and CaM in the skin tissue were measured by immunohistochemistry and western blot, respectively. RESULTS: Compared with the blank control group, the scratching times, diameter of the sensitized blue spots, degranulation rate of MCs, and the expression levels of ion channel related proteins (IP3, ROS, TRPM2 and CaM) were significantly increased (P<0.01) in the model group. In comparison with the model group, the scratching times, diameter of sensitized blue spot, degranulation rate of MCs, and the expression levels of IP3, ROS, TRPM2 and CaM in both pre-EA and medication groups were significantly down-regulated (P<0.01, P<0.05). No significant differences were found between Pre-EA and medication groups in down-regulating the levels of the above-mentioned 7 indexes. CONCLUSION: EA-LI11 and SP10 preconditioning can reduce the cutaneous anaphylaxis in urticaria rats, which may be related to its effects in inhibiting the degranulation of MCs, and the expression of TRP channel related proteins.
Assuntos
Anafilaxia , Eletroacupuntura , Canais de Cátion TRPM , Urticária , Ratos , Masculino , Animais , Mastócitos , Ratos Sprague-Dawley , Espécies Reativas de Oxigênio , Canais de Cátion TRPM/genética , Degranulação Celular , Transdução de SinaisRESUMO
In micro injection molding, the cavity thickness and surface roughness are the main effects factors of polymer flow in the die designing and affect the quality of molded products significantly. In this study, the effects of cavity thickness and roughness of cavity surface were investigated mainly on polymer flow during molding and on the roughness of molded products. The parts were molded in the cavities with the thickness from 0.05 mm to 0.25 mm and surface roughness from Ra = 46.55 nm to Ra = 462.57 nm, respectively. The filling integrities and roughness replication ratio of molded parts were used to evaluate the statements of polymer flow and microstructure replication during micro injection molding, respectively. The results showed that the filling integrity changing trends in the thinner cavities were obviously different or even opposite to those in the thicker cavities with the changing of cavity surface roughness instead of single trend in the conventional studies. For each cavity surface roughness, the filling integrity showed an upward trend with the increasing cavity thickness. In different cavity thickness, the maximum gap of filling integrity was 23.76 mm, reaching 544.94% from 0.05 mm to 0.25 mm. Additionally, the surface roughness ratio was slightly smaller than one before, reaching the polymer surface roughness limit around Ra = 71.27 nm, which was decided by the nature of the polymer itself. This study proposed the references for the design and fabrication of mold cavities and parts, and saved time and cost in the actual product manufacturing.
RESUMO
Parts with microstructure arrays have been widely used in biotechnologies and optical technologies, and their performances are affected by replication uniformity. The uniformity of the microstructure is still a challenge in micro-injection molded parts and is greatly affected by the cavity thickness and process parameters. In this study, the replication uniformity of microstructures is experimentally investigated. The relationship between the replication uniformity and cavity thickness was explored through single-factor experiments. Additionally, the impacts of the process parameters on the replication uniformity were also studied through uniform design experiments. A regression equation was established to describe the quantitative relationship between the important parameters and replication uniformity. The results showed that the replication uniformity of microstructures increases by 39.82% between the cavity with the thickness of 0.5 mm and a cavity of 0.7 mm. In addition, holding time is the most significant factor influencing the replication uniformity, followed by mold temperature, melt temperature, and injection speed. It is concluded that the thickness of cavity and the process parameters have significant influence on the replication uniformity. The experimental results provide important data on how to improve the replication uniformity of parts with microstructure arrays.
RESUMO
Brucella spp. are facultative intracellular pathogens that can persistently colonize animal host cells and cause zoonotic brucellosis. Brucellosis affects public health and safety and even affects economic development. Our lab found that a Brucella strain isolated from Marmota himalayana exhibited amikacin resistance. To annotate and analyze the potential resistance genes in this strain, we utilized sequencing platforms in this study and cloned potential resistance genes. The findings showed that the isolated strain belonged to B. abortus biovar 1 and was similar to B. abortus 2308. The isolate had amikacin resistance genes encoding aminoglycoside 3'-phosphotransferase. Based on the results of genome analysis, the isolated strain may have obtained amikacin resistance genes from Salmonella spp. through Tn3 family transposons. Notably, this study establishes a foundation for further research on the resistance mechanism of Brucella spp. and provides data that may be useful for the prevention and control of drug-resistant Brucella strains.
Assuntos
Brucella abortus , Brucelose , Amicacina/farmacologia , Animais , Brucella abortus/genética , MarmotaRESUMO
BACKGROUND: Chronic Obstructive Pulmonary Disease (COPD) is the most common respiratory disease in clinic. Traditional Chinese medicine (TCM) lung rehabilitation has gradually been valued in the field of prevention and treatment of COPD. Acupuncture, as an important part of TCM lung rehabilitation, is carried out in clinical extensively and application. It has the advantage of improving the symptoms and quality of life of COPD cases, but the evidence-based proof is limited. METHODS: Eight databases will be systematically retrieved from their inceptions to December 2021. This study will include randomized controlled trials of acupuncture in the treatment of COPD with stable stage. The main outcome will include clinical effective rate, TCM symptom score, quality of life, dyspnea, exercise capacity, lung function, frequency of acute exacerbation, adverse events. Literature screening, quality evaluation and information extraction will be completed by two independent researchers. Revman 5.3 software will be used to perform meta-analysis. Assessment of multiple systematic reviews-2 tool will be used for evaluating the methodological quality of systematic review (SR), grading of recommendations assessment will for rating the quality of evidence, and consolidated standards of reporting trials and Standards for Reporting Interventions in Clinical Trials of Acupuncture tool will for assessing the reporting quality of randomized controlled trials. RESULTS: The findings of this SR will be presented at relevant conferences and submitted for peer-review publication. CONCLUSIONS: The findings of this SR will provide up-to-date summary proof for evaluating the effectiveness and safety of acupuncture for COPD.
Assuntos
Terapia por Acupuntura , Doença Pulmonar Obstrutiva Crônica , Humanos , Metanálise como Assunto , Doença Pulmonar Obstrutiva Crônica/terapia , Qualidade de Vida , Ensaios Clínicos Controlados Aleatórios como Assunto , Revisões Sistemáticas como Assunto , Resultado do TratamentoRESUMO
Over the past several years, high- ß N experiments have been carried out on HL-2A. The high- ß N is realized using double transport barriers (DTBs) with hybrid scenarios. A stationary high- ß N ( > 2 ) scenario was obtained by pure neutral-beam injection (NBI) heating. Transient high performance was also achieved, corresponding to ß N ≥ 3 , n e / n e G â¼ 0.6 , H 98 â¼ 1.5 , f b s â¼ 30 % , q 95 â¼ 4.0 , and G â¼ 0.4 . The high- ß N scenario was successfully modeled using integrated simulation codes, that is, the one modeling framework for integrated tasks (OMFIT). In high- ß N plasmas, magnetohydrodynamic (MHD) instabilities are abundant, including low-frequency global MHD oscillation with n = 1, high-frequency coherent mode (HCM) at the edge, and neoclassical tearing mode (NTM) and Alfvénic modes in the core. In some high- ß N discharges, it is observed that the NTMs with m / n = 3 / 2 limit the growth of the plasma energy and decrease ß N . The low-n global MHD oscillation is consistent with the coupling of destabilized internal (m/n = 1/1) and external (m/n = 3/1 or 4/1) modes, and plays a crucial role in triggering the onset of ELMs. Achieving high- ß N on HL-2A suggests that core-edge interplay is key to the plasma confinement enhancement mechanism. Experiments to enhance ß N will contribute to future plasma operation, such as international thermonuclear experimental reactor .
RESUMO
A burn mark is a sort of serious surface defect on injection-molded parts. In some cases, it can be difficult to reduce the burn marks by traditional methods. In this study, external gas-assisted injection molding (EGAIM) was introduced to reduce the burn marks, as EGAIM has been reported to reduce the holding pressure. The parts with different severities of burn marks were produced by EGAIM and conventional injection molding (CIM) with the same molding parameters but different gas parameters. The burn marks were quantified by an image processing method and the quantitative method was introduced to discuss the influence of the gas parameters on burn marks. The results show that the burn marks can be eliminated by EGAIM without changing the structure of the part or the mold, and the severity of the burn marks changed from 4.98% with CIM to 0% with EGAIM. Additionally, the gas delay time is the most important gas parameter affecting the burn marks.
RESUMO
Modeling and simulation of the morphology evolution of immiscible polymer blends during injection molding is crucial for predicting and tailoring the products' performance. This paper reviews the state-of-the-art progress in the multiscale modeling and simulation of injection molding of polymer blends. Technological development of the injection molding simulation on a macroscale was surveyed in detail. The aspects of various models for morphology evolution on a mesoscale during injection molding were discussed. The current scale-bridging strategies between macroscopic mold-filling flow and mesoscopic morphology evolution, as well as the pros and cons of the solutions, were analyzed and compared. Finally, a comprehensive summary of the above models is presented, along with the outlook for future research in this field.
RESUMO
Warpage is a typical defect for injection-molded parts, especially for crystalline parts molded by rapid heat cycle molding (RHCM). In this paper, a prediction method is proposed for predicting the warpage of crystalline parts molded by the RHCM process. Multi-layer models were established to predict warpage with the same thicknesses as the skin-core structures in the molded parts. Warpages were defined as the deformations calculated by the multi-layer models. The deformations were solved using the classical laminated plate theory by Abaqus. A model was introduced to describe the elastic modulus with the influence of temperature and crystallinity. The simulation process was divided into two procedures, before ejection and after ejection. Thermal stresses and thermal strains were simulated, respectively, in the procedure before ejection and after ejection. The prediction results were compared with the experimental results, which showed that the average errors between predicted warpage and average experimental warpage are, respectively, 7.0%, 3.5%, and 4.4% in conventional injection molding (CIM), in RHCM under a 60 °C heating mold (RHCM60), and in RHCM under a 90 °C heating mold (RHCM90).
RESUMO
BACKGROUND: The prevalence of human brucellosis in Qinghai Province of China has been increasing rapidly, with confirmed cases distributed across 31 counties. However, the epidemiology of brucellosis transmission has not been fully elucidated. To characterize the infecting strains isolated from humans, multiple-locus variable-number tandem repeats analysis (MLVA) and whole-genome single-nucleotide polymorphism (SNP)-based approaches were employed. METHODS: Strains were isolated from two males blood cultures that were confirmed Brucella melitensis positive following biotyping and MLVA. Genomic DNA was extracted from these two strains, and whole-genome sequencing was performed. Next, SNP-based phylogenetic analysis was performed to compare the two strains to 94 B. melitensis strains (complete genome and draft genome) retrieved from online databases. RESULTS: The two Brucella isolates were identified as B. melitensis biovar 3 (QH2019001 and QH2019005) following conventional biotyping and were found to have differences in their variable number tandem repeats (VNTRs) using MLVA-16. Phylogenetic examination assigned the 96 strains to five genotype groups, with QH2019001 and QH2019005 assigned to the same group, but different subgroups. Moreover, the QH2019005 strain was assigned to a new subgenotype, IIj, within genotype II. These findings were then combined to determine the geographic origin of the two Brucella strains. CONCLUSIONS: Utilizing a whole-genome SNP-based approach enabled differences between the two B. melitensis strains to be more clearly resolved, and facilitated the elucidation of their different evolutionary histories. This approach also revealed that QH2019005 is a member of a new subgenotype (IIj) with an ancient origin in the eastern Mediterranean Sea.
Assuntos
Brucella melitensis , Brucelose , Brucella melitensis/genética , Brucelose/epidemiologia , China/epidemiologia , Genótipo , Humanos , Masculino , Repetições Minissatélites/genética , Tipagem de Sequências Multilocus , FilogeniaRESUMO
Musculoskeletal changes are the most common clinical manifestation of brucellosis. The main objective of this study was to provide a better understanding of this disease, while also attempting to identify potential markers that can identify the early stage musculoskeletal changes associated with human brucellosis. In this case-control study, 41 male early-stage brucellosis patients (within 6 months of diagnosis) who had not received drug therapy and 44 matched controls were examined. Venous blood samples were collected and serum pyridinoline (PYD), type II collagen cleavage neoepitope (C2C) and osteocalcin (OC) levels were quantified using an enzyme-linked immunosorbent assay (ELISA). In the brucellosis group, the median serum levels of PYD (278.53 µg/L), C2C (82.23 µg/L) and OC (8.41 µg/L) were significantly elevated relative to the control group (Z = 5.686, 3.997, 3.579; P = 0.000). Serum PYD, C2C, and OC levels were increased in early-stage male brucellosis patients, and these factors appear to have promise as potential indicator biomarkers that can reflect the osteoarticular changes that occur in the early stage of human brucellosis.
Assuntos
Aminoácidos/química , Brucelose/sangue , Colágeno Tipo II/sangue , Osteocalcina/sangue , Fragmentos de Peptídeos/sangue , Adulto , Biomarcadores/sangue , Estudos de Casos e Controles , Humanos , MasculinoRESUMO
The morphology of polymer blends plays a critical role in determining the properties of the blends and performance of resulting injection-molded parts. However, it is currently impossible to predict the morphology evolution during injection molding and the final micro-structure of the molded parts, as the existing models for the morphology evolution of polymer blends are still limited to a few simple flow fields. To fill this gap, this paper proposed a novel model for droplet morphology evolution during the mold filling process of polymer blends by coupling the models on macro- and meso-scales. The proposed model was verified by the injection molding experiment of PP/POE blends. The predicted curve of mold cavity pressure during filling process agreed precisely with the data of the corresponding pressure sensors. On the other hand, the model successfully tracked the moving trajectory and simulated morphology evolution of the droplets during the mold-filling process. After mold-filling ended, the simulation results of the final morphology of the droplets were consistent with the observations of the scanning electron microscope (SEM) experiment. Moreover, this study revealed the underlying mechanism of the droplet morphology evolution through the force analysis on the droplet. It is validated that the present model is a qualified tool for simulating the morphology evolution of polymer blends during injection molding and predicting the final microstructure of the products.
RESUMO
Bismuth ferrite (BiFeO3, BFO) submicron cubes and 3D BFO/graphene composite materials were synthesized by a simple hydrothermal process. The crystallization processes of the 3D BFO/graphene composites with different graphene oxide (GO) concentrations were studied for their visible light photocatalytic properties. Compared to the single BFO submicron cubes, 3D BFO/graphene composites have greatly improved photocatalytic activity. A high photocatalytic performance is obtained at a GO concentration of 3 mg/mL, with the degradation rate of methylene blue (MB) dye reaching up to 92% in 140 min. The enhancement of photocatalytic activity can be attributed to the large specific surface area and 3D architecture of 3D composites, which provide more transport paths to effectively improve the separation rate of photo-generated electrons and holes. Therefore, 3D BFO/graphene composites have a broad prospect of application in the field of photocatalysis.
RESUMO
BACKGROUND: Brucellosis is an important public health problem in China. Brucellosis can cause many osteoarticular changes, especially chronic brucellosis. Brucellosis presents various diagnostic difficulties because it mimics many other diseases. Because of the poor sensitivity and ability of X-ray image, it is necessary to find a good method of early diagnosis for osteoarticular changes among brucellosis patients at an early period. The aim of this study was to find early changes biomarkers for osteoarticular changes among brucellosis patients at an early period and provide a better understanding of the osteoarticular changes in this disease at an early stage. METHODS: Sixty-one cases of brucellosis patients at an early period (within 6 months) and 67 cases of volunteers were selected and divided into brucellosis vs. control groups. Serum samples were detected with serological tests for brucellosis, including rose bengal plate test (RBPT), agglutination test (SAT), and IgG and IgM with ELISA. Meanwhile, cartilage oligomeric matrix protein (COMP) and neopterin (NPT) levels in all samples were measured simultaneously with ELISA. The data were analyzed using SPSS 17.0 software. RESULTS: Together with the clinical examination, epidemiological investigation, and serological tests of RBPT, SAT, and IgG and IgM with ELISA, the patients from brucellosis group all were diagnosed as brucellosis cases at an early period, while the results of RBPT, SAT, and IgG and IgM with ELISA from the healthy control group were negative. Comparing with the healthy control, the medians of serum NPT and COMP in the patients group were 9.26 ng/l, 1.70 ng, respectively, which were higher than that of the healthy control group with significant differences (Z = 5.512, 3.614, all p = 0.000). CONCLUSION: The serum NPT and COMP levels of brucellosis patients at an early period were increased. The serum NPT and COMP levels might be the indicator biomarker for osteoarticular changes of human brucellosis at an early stage.
Assuntos
Brucelose , Proteína de Matriz Oligomérica de Cartilagem , Neopterina , Adulto , Idoso , Idoso de 80 Anos ou mais , Brucelose/sangue , Brucelose/diagnóstico , Proteína de Matriz Oligomérica de Cartilagem/sangue , Estudos de Casos e Controles , China , Ensaio de Imunoadsorção Enzimática , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Neopterina/sangue , Adulto JovemRESUMO
A ferromagnetic three-dimensional ordered macroporous TiO2/CoPt/α-Fe2O3 (3DOMTCF) nanocomposite was synthesized via a sol-gel approach templated by poly(methyl methacrylate) (PMMA) microspheres. After magnetization, it exhibited an extremely high reversible capacity and a long cycle life, which were ascribed to the internal magnetic field for reusing pulverized active materials and its unique structure.