Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 35
Filtrar
1.
Biomed Opt Express ; 15(4): 2238-2250, 2024 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-38633061

RESUMO

Hyperspectral imaging (HSI) offers a wealth of information regarding human skin. In this study, we established a dynamic skin spectral reflectance model (DSSR) relating the reflectance to skin surface strain, considering multi physiological and physical parameters of the skin. Experimentally, by HSI, we measured the reflectance variance of the forearm skin in vivo caused by the surface strain, and assessed these key parameters. For the human skin in vivo, within the strain range covered in this paper, stretching increases spectral reflectance, while compression decreases it. Our proposed model provides a possibility for non-contact strain measurement and health monitoring on the skin in vivo based on HSI.

2.
Sensors (Basel) ; 24(8)2024 Apr 11.
Artigo em Inglês | MEDLINE | ID: mdl-38676067

RESUMO

Facial expression is an important way to reflect human emotions and it represents a dynamic deformation process. Analyzing facial movements is an effective means of understanding expressions. However, there is currently a lack of methods capable of analyzing the dynamic details of full-field deformation in expressions. In this paper, in order to enable effective dynamic analysis of expressions, a classic optical measuring method called stereo digital image correlation (stereo-DIC or 3D-DIC) is employed to analyze the deformation fields of facial expressions. The forming processes of six basic facial expressions of certain experimental subjects are analyzed through the displacement and strain fields calculated by 3D-DIC. The displacement fields of each expression exhibit strong consistency with the action units (AUs) defined by the classical Facial Action Coding System (FACS). Moreover, it is shown that the gradient of the displacement, i.e., the strain fields, offers special advantages in characterizing facial expressions due to their localized nature, effectively sensing the nuanced dynamics of facial movements. By processing extensive data, this study demonstrates two featured regions in six basic expressions, one where deformation begins and the other where deformation is most severe. Based on these two regions, the temporal evolutions of the six basic expressions are discussed. The presented investigations demonstrate the superior performance of 3D-DIC in the quantitative analysis of facial expressions. The proposed analytical strategy might have potential value in objectively characterizing human expressions based on quantitative measurement.


Assuntos
Expressão Facial , Imageamento Tridimensional , Humanos , Imageamento Tridimensional/métodos , Face/fisiologia , Emoções/fisiologia , Algoritmos , Processamento de Imagem Assistida por Computador/métodos
3.
PeerJ ; 12: e16757, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-38223763

RESUMO

The chemokine-like factor (CKLF)-like MARVEL transmembrane domain-containing (CMTM) family includes CMTM1-8 and CKLF, and they play key roles in the hematopoietic, immune, cardiovascular, and male reproductive systems, participating in the physiological functions, cancer, and other diseases associated with these systems. CMTM family members activate and chemoattract immune cells to affect the proliferation and invasion of tumor cells through a similar mechanism, the structural characteristics typical of chemokines and transmembrane 4 superfamily (TM4SF). In this review, we discuss each CMTM family member's chromosomal location, involved signaling pathways, expression patterns, and potential roles, and mechanisms of action in pancreatic, breast, gastric and liver cancers. Furthermore, we discuss several clinically applied tumor therapies targeted at the CMTM family, indicating that CMTM family members could be novel immune checkpoints and potential targets effective in tumor treatment.


Assuntos
Quimiocinas , Proteínas com Domínio MARVEL , Neoplasias , Humanos , Quimiocinas/genética , Proteínas com Domínio MARVEL/genética , Transdução de Sinais , Neoplasias/genética
4.
Pharmaceutics ; 15(2)2023 Feb 06.
Artigo em Inglês | MEDLINE | ID: mdl-36839868

RESUMO

Urologic cancers, particularly kidney, bladder, and prostate cancer, have a growing incidence and account for about a million annual deaths worldwide. Treatments, including surgery, chemotherapy, radiotherapy, hormone therapy, and immunotherapy are the main therapeutic options in urologic cancers. Immunotherapy is now a clinical reality with marked success in solid tumors. Immunological checkpoint blockade, non-specific activation of the immune system, adoptive cell therapy, and tumor vaccine are the main modalities of immunotherapy. Immunotherapy has long been used to treat urologic cancers; however, dose-limiting toxicities and low response rates remain major challenges in the clinic. Herein, nanomaterial-based platforms are utilized as the "savior". The combination of nanotechnology with immunotherapy can achieve precision medicine, enhance efficacy, and reduce toxicities. In this review, we highlight the principles of cancer immunotherapy in urology. Meanwhile, we summarize the nano-immune technology and platforms currently used for urologic cancer treatment. The ultimate goal is to help in the rational design of strategies for nanomedicine-based immunotherapy in urologic cancer.

5.
Opt Express ; 31(1): 555-563, 2023 Jan 02.
Artigo em Inglês | MEDLINE | ID: mdl-36606991

RESUMO

This paper presents a method to measure the three-dimensional distribution of uniaxial stress based on Terahertz Time Domain Spectroscopy (THz-TDS). The measurement principle was first established, which combines the computed tomography (CT) method and the photo-elastic effects. A classic filtered back-projection algorithm is adopted to calculate the three-dimensional stress fields from THz-TDS scanning images. Then, in verification experiment, the uniaxial stress distribution in the compressed cylinder and the stretched screw is obtained based on the measurement principle. Finally, the reliability of the proposed method has been verified by comparing the experiment results with the finite element simulation. A reasonable agreement is obtained.

6.
Opt Express ; 30(26): 46193-46208, 2022 Dec 19.
Artigo em Inglês | MEDLINE | ID: mdl-36558579

RESUMO

Picosecond ultrasonics (PU), time-domain Brillouin scattering (TDBS), and time-domain thermo-reflectance (TDTR) are all in-situ, non-destructive, and non-contact experimental techniques based on the ultrafast laser pump-probe method, which can generate and detect coherent acoustic phonons (CAP) and thermal transport in thin metal film-glass substrate system. However, these techniques are generally considered different experimental methods to characterize the thermal or mechanical properties of metal nano-objects or transparent materials. Here we present a comprehensive characterization of the generation, propagation, and attenuation of high-frequency CAP and cross-plane thermal transport in the thin Cr film-glass substrate system by PU, TDBS, and TDTR. To investigate the key factors of characterizations, two kinds of thin Cr film-glass substrate systems were measured on the film side and substrate side. The measured thermal and mechanical properties show that boundary conditions and film thickness have significantly affected the characterization.

7.
Osteoarthr Cartil Open ; 4(4): 100321, 2022 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-36474787

RESUMO

Objective: Single-cell RNA sequencing (scRNA-seq) is a powerful technology that can be applied to the cells populating the whole knee in the study of joint pathology. The knee contains cells embedded in hard structural tissues, cells in softer tissues and membranes, and immune cells. This creates a technical challenge in preparing a viable and representative cell suspension suitable for use in scRNA-seq in minimal time, where under-digestion may exclude cells in hard tissues, over-digestion may damage soft tissue cells, and prolonged digestion may induce phenotypic drift. We developed a rapid two-stage digestion protocol to overcome these difficulties. Design: A two-stage digest consisting of first collagenase IV, an intermediate cell recovery, then collagenase II on the remaining hard tissue. Cells were sequenced on the 10x Genomics platform. Results: We observed consistent cell numbers and viable single cell suspensions suitable for scRNA-seq analysis. Comparison of contralateral knees and separate mice showed reproducible cell yields and gene expression patterns by similar cell-types. A diverse collection of structural and immune cells were captured with a majority from immune origins. Two digestions were necessary to capture all cell-types. Conclusions: The knee contains a diverse mixture of stromal and immune cells that may be crucial for the study of osteoarthritis. The two-stage digestion presented here reproducibly generated highly viable and representative single-cell suspension for sequencing from the whole knee. This protocol facilitates transcriptomic studies of the joint as a complete organ.

8.
Materials (Basel) ; 15(21)2022 Oct 22.
Artigo em Inglês | MEDLINE | ID: mdl-36363012

RESUMO

With the development of flexible electronic technology, lately, there has been an increase in demand for flexible electronic devices based on soft polymer-substrate metal film structures in challenging applications. These soft polymer-substrate metal film structures must tolerate bending, folding, stretching, and even deformation into any shape without failing to be used successfully. As a result, research into the fracture behavior of soft polymer-substrate metal film structures is essential. The purpose of this study was to investigate how fractures develop in Cr film attached to a polyimide (PI) substrate under biaxial stress. A fracture development model was built to determine the fracture propagation law of soft polymer-substrate metal film structures under biaxial stress. Experiments and finite element methods were applied to verify the correctness of the model. The theoretical analysis and finite element simulation results showed that fractures appeared initially at the perimeter of the film and then propagated to the center under biaxial stress. The theoretical and experimental results indicated that the crack propagation direction was related to the ratio of biaxial loading, which became progressively parallel to the direction of small loading as the biaxial loading ratio increased. The theoretical results were in line with the experiment results, which could be used as a preliminary step for further research on the fracture behavior of film-substrate structures.

9.
ACS Omega ; 7(16): 13615-13621, 2022 Apr 26.
Artigo em Inglês | MEDLINE | ID: mdl-35559157

RESUMO

Molybdenum disulfide (MoS2) is a promising candidate for the development of high-performance photodetectors, due to its excellent electric and optoelectronic properties. However, most of the reported MoS2 phototransistors have adopted a back-gate field-effect transistor (FET) structure, requiring applied gate bias voltages as high as 70 V, which made it impossible to modulate each detecting device in the fabricated array. In this paper, buried-gate FETs based on CVD-grown monolayer MoS2 were fabricated and their electric and photoelectric properties were also systematically investigated. A photoresponsivity of around 6.86 A/W was obtained at 395 nm, under the conditions of zero gate bias voltage and a light power intensity of 2.57 mW/cm2. By application of a buried-gate voltage of 8 V, the photoresponsivity increased by nearly 10 times. Furthermore, the response speed of the buried-gate MoS2 FET phototransistors is measured to be around 350 ms. These results pave the way for MoS2 photodetectors in practical applications.

10.
J Clin Neurosci ; 99: 89-93, 2022 May.
Artigo em Inglês | MEDLINE | ID: mdl-35278934

RESUMO

This study aimed to retrospectively explore the relationship between facet tropism (FT) and cervical disc degeneration in cervical spondylotic radiculopathy (CSR) patients on 3-dimensional views. A total of 180 middle-aged patients with single-level CSR at C4/5 who underwent cervical CT and MRI in our hospital were included. The incidence of FT (or called FT (+), defined as FT ≥ 7 degree) at C3/4, C4/5, C5/6 levels were measured and calculated by reconstructed CT images on 3-dimensional views. The grade of cervical disc degeneration at three levels was assessed by MRI images by the method of Miyazali. Univariate analysis was performed to compare their cervical disc degeneration grade and CSR incidence between two groups stratified by FT (+). Moreover, a logistic regression model was used to investigate the association between FT (+) and grade of cervical disc degeneration and incidence of CSR adjusting for age, gender, and BMI. Grade of cervical disc degeneration and incidence of CSR in axial FT (+) group were both significantly increased compared to axial FT (-) group, while sagittal and coronal FT (+) groups showed no difference. Axial FT (+) was significantly associated with the grade of cervical disc degeneration and incidence of CSR. in middle-aged patients with CSR, axial FT (+) might be the risk factor for cervical disc degeneration but not sagittal and coronal FT (+). Also, axial FT (+) was positively associated with CSR incidence. Therefore, axial FT might play a vital role in the progression of cervical disc degeneration and CSR occurrence.


Assuntos
Degeneração do Disco Intervertebral , Disco Intervertebral , Radiculopatia , Espondilose , Articulação Zigapofisária , Vértebras Cervicais/diagnóstico por imagem , Humanos , Degeneração do Disco Intervertebral/complicações , Degeneração do Disco Intervertebral/diagnóstico por imagem , Degeneração do Disco Intervertebral/epidemiologia , Pessoa de Meia-Idade , Radiculopatia/diagnóstico por imagem , Radiculopatia/etiologia , Estudos Retrospectivos , Espondilose/complicações , Espondilose/diagnóstico por imagem , Tropismo , Articulação Zigapofisária/diagnóstico por imagem
11.
Micromachines (Basel) ; 12(6)2021 May 26.
Artigo em Inglês | MEDLINE | ID: mdl-34073505

RESUMO

Three-dimensional vertical resistive random access memory (VRRAM) is proposed as a promising candidate for increasing resistive memory storage density, but the performance evaluation mechanism of 3-D VRRAM arrays is still not mature enough. The previous approach to evaluating the performance of 3-D VRRAM was based on the write and read margin. However, the leakage current (LC) of the 3-D VRRAM array is a concern as well. Excess leakage currents not only reduce the read/write tolerance and liability of the memory cell but also increase the power consumption of the entire array. In this article, a 3-D circuit HSPICE simulation is used to analyze the impact of the array size and operation voltage on the leakage current in the 3-D VRRAM architecture. The simulation results show that rapidly increasing leakage currents significantly affect the size of 3-D layers. A high read voltage is profitable for enhancing the read margin. However, the leakage current also increases. Alleviating this conflict requires a trade-off when setting the input voltage. A method to improve the array read/write efficiency is proposed by analyzing the influence of the multi-bit operations on the overall leakage current. Finally, this paper explores different methods to reduce the leakage current in the 3-D VRRAM array. The leakage current model proposed in this paper provides an efficient performance prediction solution for the initial design of 3-D VRRAM arrays.

12.
Front Plant Sci ; 12: 623504, 2021.
Artigo em Inglês | MEDLINE | ID: mdl-34046046

RESUMO

Reproductive organs of Bacillus thuringiensis transgenic cotton, which contribute to cotton final yield, have low insect resistant efficacy, so it is important to improve their insect resistance. This study was conducted to find out the impact of different urea spray doses on the expression of Cry1A protein in boll shell of Bt cotton (Sikang 1 and Sikang 3), and nitrogen metabolism in this process was also studied to uncover the physiological mechanism. The experiment with six urea doses was organized during peak boll stage in 2017 and 2018. The results showed that urea spray could significantly increase boll shell insecticidal protein contents in both cultivars, with the highest Bt protein content observed at 28-32 kg ha-1 urea dose. In addition, urea spray increased the contents of soluble protein and free amino acid and the activities of GS, GOGAT, GOT, and GPT, but decreased the activities of peptidase and protease in boll shell. Correlation analysis showed that the amount of boll shell Bt protein was positively correlated with levels of soluble protein and amino acid, and activities of GS, GOGAT, GOT, and GPT, but negatively correlated with peptidase and protease activities. Thus, this study demonstrated that higher protein synthesis ability and lower proteolysis ability were related to increased Bt protein content in urea-sprayed boll shell.

13.
Cancer Lett ; 469: 481-489, 2020 01 28.
Artigo em Inglês | MEDLINE | ID: mdl-31738958

RESUMO

Docetaxel-mediated chemotherapy is the first line therapy for metastatic castration-resistant prostate cancer (CRPC) patients, but its therapeutic benefit is limited by the development of resistance. Although Forkhead box protein M1 (FOXM1) has been implicated in prostate tumorigenesis and metastasis, its role in docetaxel resistance has not been studied. Here, we showed that FOXM1 expression was upregulated in the docetaxel resistant CRPC cell lines (PC3-DR and VCaP-DR) and knockdown of FOXM1 sensitized the cells to docetaxel both in vitro and in vivo. In addition, autophagy was found to be significantly enhanced in resistant cells. Moreover, FOXM1 overexpression cells showed increased autophagic flux and higher numbers of autophagosomes. Knockdown of ATG7, beclin-1 or cotreatment with chloroquine, partly restored sensitivity to docetaxel in the FOXM1-overexpressing cells. Mechanistically, FOXM1 targeted AMPK/mTOR to activate the autophagy pathway and altered docetaxel response in CRPC. These findings identify the role of FOXM1 as well as the mechanism underlying FOXM1 action in docetaxel sensitivity and may, therefore, aid in design of CRPC therapies.


Assuntos
Proteína 7 Relacionada à Autofagia/genética , Docetaxel/farmacologia , Proteína Forkhead Box M1/genética , Neoplasias de Próstata Resistentes à Castração/tratamento farmacológico , Serina-Treonina Quinases TOR/genética , Quinases Proteína-Quinases Ativadas por AMP , Apoptose/efeitos dos fármacos , Autofagia/efeitos dos fármacos , Proteína 7 Relacionada à Autofagia/antagonistas & inibidores , Proteína Beclina-1/genética , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Cloroquina/farmacologia , Resistencia a Medicamentos Antineoplásicos/genética , Proteína Forkhead Box M1/antagonistas & inibidores , Regulação Neoplásica da Expressão Gênica/efeitos dos fármacos , Humanos , Masculino , Neoplasias de Próstata Resistentes à Castração/genética , Neoplasias de Próstata Resistentes à Castração/patologia , Proteínas Quinases/genética
14.
Gene ; 719: 144080, 2019 Nov 30.
Artigo em Inglês | MEDLINE | ID: mdl-31454541

RESUMO

Trigeminal neuropathic pain is seen as a huge clinical challenge. Although numerous drugs have been developed to treat the condition, some patients have shown intolerance to the drugs and thus continue to suffer. In the present study, a rat model of trigeminal neuropathic pain was established using incorrectly positioned dental implants, which had various manifestations that were similar to human trigeminal neuropathic pain. Using this model, we investigated the differential regulation of JAK2 and PTEN. Firstly, we examined the expression of JAK2 and PTEN in the medullary dorsal horn. After inhibiting JAK2/PTEN, we evaluated nociception-related behavioral alterations. The rat models were established by replacing the left lower second molar with a mini dental implant. Immunoblot assay and immunofluorescence experiments indicated high expression of JAK2 and PTEN in medullary dorsal horn after the nerve injury, which attained plateau levels on post-operative day (POD) 5-10 and 10-20. Administration of adenovirus-shRNA-JAK2 on POD 1 reduced mechanical allodynia and downstream STAT activation. Meanwhile, the administration of adenovirus-shRNA-PTEN on POD 1 attenuated mechanical allodynia while upregulating AKT. In addition to postoperative JAK2 and PTEN activation, dexmedetomidine treatment (10 mg/kg) also modulated the downstream sensors of these signaling molecules. These data suggest that JAK2 and PTEN are pivotal to the development of trigeminal neuropathic pain, and that JAK2 and PTEN suppression alleviates the neuropathic pain.


Assuntos
Técnicas de Silenciamento de Genes , Janus Quinase 2/genética , Neuralgia/diagnóstico , PTEN Fosfo-Hidrolase/genética , Neuralgia do Trigêmeo/genética , Animais , Implantes Dentários/efeitos adversos , Dexametasona/administração & dosagem , Dexametasona/uso terapêutico , Dexmedetomidina/administração & dosagem , Dexmedetomidina/uso terapêutico , Modelos Animais de Doenças , Hiperalgesia/tratamento farmacológico , Hiperalgesia/etiologia , Janus Quinase 2/antagonistas & inibidores , Masculino , Neuralgia/genética , PTEN Fosfo-Hidrolase/antagonistas & inibidores , Medição da Dor , Ratos , Ratos Sprague-Dawley
15.
Opt Express ; 27(13): 18435-18444, 2019 Jun 24.
Artigo em Inglês | MEDLINE | ID: mdl-31252787

RESUMO

Digital Image Correlation (DIC) is a superior optical method to measure the surface deformation with a high accuracy. Currently, most researches on DIC are based on random patterns. In this paper, A DIC/Moiré hybrid method using regular patterns is proposed for deformation measurement. In this method, a Moiré fringe technique based on correlation coefficient is developed to provide accurate initial deformation estimation for DIC. Experimental results indicate a higher computational efficiency by the proposed method than the conventional DIC method. It is also found that the calculation accuracy increases using regular patterns. The advantage of obtaining accurate initial estimation by the DIC/Moiré hybrid method may enable potential application in deformation measurements.

16.
Rev Sci Instrum ; 90(4): 045103, 2019 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-31043018

RESUMO

A miniaturized biaxial tensile apparatus is presented. Based on a torsional loading design, the total dimensions and weight of the apparatus have been reduced, while the output force has been increased. Owing to the use of four independent stepping motors, the apparatus can realize arbitrary displacement ratios during the loading processes. The apparatus is designed to be applied with a laser scanning confocal microscope realizing in situ mechanical tests. Through a proof-of-principle experiment with an optimized cruciform shaped specimen, the developed biaxial tensile apparatus is proved to be suitable for in situ tests of biaxial stress analysis.

17.
Materials (Basel) ; 12(7)2019 Apr 03.
Artigo em Inglês | MEDLINE | ID: mdl-30987099

RESUMO

An Ni/nanodiamond composite coating was deposited on carbon steel in a traditional Watt's solution without additives via direct current (DC) electroplating. The effects of the nanodiamond concentration and current density in the plating solution on the morphology, grain size, and texture of the Ni/nanodiamond composite coating were observed using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The distribution of the nanodiamond particles in the composite coating was investigated by Raman spectra and SEM. The mechanical properties of the composite coating, such as its elastic modulus and hardness, were examined using a Nano Indenter XP nanometer mechanical test system. The coefficient of friction was tested using a Universal Micro-Tribotester. The results demonstrated that the preferential orientation of the Ni/nanodiamond composite coating varied from the (111) crystal orientation of the pure nickel coating to the (200) crystal orientation. When the nanodiamond concentration in the plating solution was 8.0 g/L and the current density was 3.0 A/dm², the hardness of the composite coating reached the maximum value of 5.302 GPa and the friction factor was maintained at around 0.1. The average grain size of the composite coating was reduced to 20.4 nm.

18.
Front Cell Dev Biol ; 7: 44, 2019.
Artigo em Inglês | MEDLINE | ID: mdl-31001530

RESUMO

The aim of the present study was to evaluate the impact of the microenvironment produced by dermal microvascular endothelial cells, secondary to a pro-inflammatory challenge, on 2D culture models using dermal fibroblasts and in 3D reconstructed skin model using dermal fibroblasts and keratinocytes from healthy donors. We hypothesized that specific microvascular endothelial low grade inflammation could change fibroblasts phenotype and be involved in extracellular matrix (ECM) modification and skin alteration. Following IFNγ, TNFα, IL-1ß pro-inflammatory stress on Human Dermal Endothelial Cells (HDMEC) we observed the increased release of Chemokine ligand 2 (CCL2), IL-6 and IL-8 but not VEGF-A in the conditioned medium (CM). The subsequent addition of this endothelial pro-inflammatory CM in dermal fibroblasts revealed an upregulation of IL6, IL8 and CCL2 but no NF-κB gene expression. The resulting ECM formation was impaired with a reduction of the collagen 1 network and a decrease in COL1A1 gene expression in 2D and 3D models. Collagen 1 and pro-LOX protein expression were significantly reduced confirming an impairment of the collagen network related to endothelial inflammation secretion. To conclude, this work showed that, without any immune cells, the endothelial secretion in response to a pro-inflammatory stress is able to activate the fibroblasts that will maintain the pro-inflammatory environment and exacerbate ECM degradation.

19.
Materials (Basel) ; 12(5)2019 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-30845671

RESUMO

A super-hydrophobic aluminum alloy surface with decorated pillar arrays was obtained by hybrid laser ablation and further silanization process. The as-prepared surface showed a high apparent contact angle of 158.2 ± 2.0° and low sliding angle of 3 ± 1°. Surface morphologies and surface chemistry were explored to obtain insights into the generation process of super-hydrophobicity. The main objective of this current work is to investigate the maximum spreading factor of water droplets impacting on the pillar-patterned super-hydrophobic surface based on the energy conservation concept. Although many previous studies have investigated the droplet impacting behavior on flat solid surfaces, the empirical models were proposed based on a few parameters including the Reynolds number (Re), Weber number (We), as well as the Ohnesorge number (Oh). This resulted in limitations for the super-hydrophobic surfaces due to the ignorance of the geometrical parameters of the pillars and viscous energy dissipation for liquid flow within the pillar arrays. In this paper, the maximum spreading factor was deduced from the perspective of energy balance, and the predicted results were in good agreement with our experimental results with a mean error of 4.99% and standard deviation of 0.10.

20.
Exp Ther Med ; 14(1): 531-538, 2017 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-28672963

RESUMO

Large skin defects are commonly observed in the clinic and have attracted much attention recently. Therefore, finding an effective solution for large skin defects is a global problem. The objective of the present study was to assess the effectiveness of the EASApprox® skin-stretching system for closing large skin defects. Skin defects (5×5 cm) were created on the forearms of 9 Bama miniature pigs, which were randomly divided into the following three groups: Direct suture, the new EASApprox® skin-stretching device and Kirschner wires. Microcirculation was assessed before surgery and after wound closure. Following the different treatments, the defects were sutured, and wound healing was assessed based on a clinical score. Furthermore, microscopic and ultramicroscopic structures were evaluated, including collagen, elastic fibers and the microvessel density. Significant differences in the clinical score and microvessel density were observed among the groups. Additionally, the mean length obtained for elastic fibers was larger than that obtained for the other two groups. Finally, the new EASApprox® skin-stretching device resulted in successful wound management and with only minor side effects on skin histology and microcirculation. Therefore, this method has the potential to be used for healing large skin defects.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA