Clinical influencing factors of vital pulp therapy on pulpitis permanent teeth with 2 calcium silicate-based materials: A randomized clinical trial.

BACKGROUND: Compared with traditional root canal therapy (RCT), vital pulp therapy (VPT) is a personalized and minimally invasive method for the treatment of pulpitis caused by dental caries. However, there are still no clear guidelines for VPT because high-quality randomized clinical trials are scarce. This prospective cohort study evaluated the clinical efficacy of VPT with the light-curable calcium silicate-based material TheraCal LC (TH) and bioceramic material iRoot BP Plus (BP) in reversible and irreversible pulpitis permanent teeth with carious exposures. METHODS: 115 teeth with reversible or irreversible pulpitis caused by deep care were randomly divided into 2 groups. TheraCal LC and iRoot BP Plus were used for the pulp capping. Direct pulp capping (DPC), partial pulpotomy (PP) and full pulpotomy (FP) were performed based on observation of the exposed pulp. Postoperative discomforts were enquired and recorded via follow-up phone calls. Clinical and radiographic evaluations were performed 3, 6, and 12 months postoperatively. RESULTS: The overall clinical success rate in the first year was 90.4% (47/52) in both groups. The TH group required less operating time, showed lower levels of pain, and had shorter pain duration post-operative (P < .001). According to the binary logistic regression model, preoperative pain duration was significantly correlated with the prognosis of VPT (P = .011). CONCLUSION: VPT with TheraCal LC and iRoot BP Plus in pulpitis permanent carious teeth both achieved good clinical outcomes, and TheraCal LC can be easily operated for clinical use. Preoperative pain duration of the affected tooth might have a significant correlation with the prognosis of VPT.

Bottom-up Assembling Hierarchical Enamel-like Bulk Materials with Excellent Optical and Mechanical Properties for Tooth Restoration.

Enamel has good optical and mechanical properties because of its multiscale hierarchical structure. Biomimetic construction of enamel-like 3D bulk materials at nano-, micro-, mesh- and macro-levels is a challenge. We reported a novel facile, cost-effective, and easy large-scale bottom-up assembly strategy to align 1D hydroxyapatite (HA) nanowires bundles to 3D hierarchical enamel structure with the nanowires bundles layer-by-layer interweaving orientation. In the strategy, the surface of oleate templated ultralong HA nanowires with a large aspect ratio was functionalized with amphiphilic 10-methacryloyloxydecyl dihydrogen phosphate (MDP). Furtherly, the MDP functionalized HA nanowire bundles were assembled layer-by-layer with oriented fibers in a single layer and cross-locked between layers at a certain angle at mesoscale and macroscale in the viscous bisphenol A-glycidyl methacrylate (Bis-GMA) ethanol solution by shear force induced by simple agitation and high-speed centrifugation. Finally, the excessive Bis-GMA and ethanol were removed, and (Bis-GMA)-(MDP-HA nanowire bundle) matrix was densely packed under hot pressing and polymerized to form bulk enamel-like materials. The composite has superior optical properties and comparable comprehensive mechanic performances through a combination of strength, hardness, toughness, and friction. This method may open new avenues for precisely controlling the nanowires assembly to develop hierarchical nanomaterials with superior properties for many different applications. This article is protected by copyright. All rights reserved.

Colloidal Phenol-Amine Coating on Implants for Improved Anti-Inflammation and Osteogenesis.

Phenol-amine coatings have attracted significant attention in recent years owing to their adjustable composition and multifaceted biological functionalities. The current preparation of phenol-amine coatings, however, involves a chemical reaction within the solution or interface, resulting in lengthy preparation times and necessitating specific reaction conditions, such as alkaline environments and oxygen presence. The facile, rapid, and eco-friendly preparation of phenol-amine coatings under mild conditions continues to pose a challenge. In this study, we use a macromolecular phenol-amine, Tanfloc, to form a stable colloid under neutral conditions, which was then rapidly adsorbed on the titanium surface by electrostatic action and then spread and fused to form a continuous coating within several minutes. This nonchemical preparation process was rapid, mild, and free of chemical additives. The in vitro and in vivo results showed that the Tanfloc colloid fusion coating inhibited destructive inflammation, promoted osteogenesis, and enhanced osteointegration. These remarkable advantages of the colloidal phenol-amine fusion coating highlight the suitability of its future application in clinical practice.

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding.

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

A programmed surface on dental implants sequentially initiates bacteriostasis and osseointegration.

Osteogenesis surrounding dental implants is initiated by a series of early physiological events, including the inflammatory response. However, the persistence of an anti-infection surface often results in compromised histocompatibility and osseointegration. Here, we presented a programmed surface containing both silver nanoparticles (AgNPs) and silver ions (Ag+) with a heterogeneous structure and time-dependent functionalities. The AgNPs were located at the surface of the heparin-chitosan polyelectrolyte coating (PEM), whereas Ag+ was distributed at both the surface and inside of the coating under optimized conditions (pH=4). The optimized coating (Ag-4) exhibited potent bactericidal activity at the early stage (12 and 24 h after inoculation) and a sustained antibacterial efficacy in the subsequent stage (one or two weeks), as it gradually depleted. Furthermore, compared to coatings with sustained high silver concentrations in bacteria-cell coculture experiments, the degradable Ag-4 coating demonstrated improved cytocompatibility, better cell viability, and morphology over time. At a later stage (within one month), the in vivo test revealed that Ag-4-coated titanium had superior histocompatibility and osteogenesis outcomes compared to bare titanium in a bacteria-exposed environment. The programmed surface of dental implants presented in this study offers innovative ideas for sequential antibacterial effects and osseointegration.

Is Etiology a Key Factor for Regenerative Endodontic Treatment Outcomes?

INTRODUCTION: This study aimed to evaluate treatment outcomes of regenerative endodontic treatment (RET) in nonvital immature permanent teeth due to developmental malformation and trauma, and to analyze the influence of etiology on the prognosis. METHODS: Fifty-five cases were included and divided into a malformation group (n = 33) and a trauma group (n = 22). Treatment outcomes were classified as healed, healing, and failure. Root development was evaluated in terms of root morphology and the percentage changes in root length, root width, and apical diameter during a follow-up period of 12-85 months (mean 30.8 months). RESULTS: The mean age and the mean degree of root development in the trauma group were significantly younger than that in the malformation group. The success rate of RET was 93.9% (81.8% healed, 12.1% healing) in the malformation group and 90.9% (68.2% healed, 22.7% healing) in the trauma group, showing no statistically significant difference. The proportion of type I-III root morphology in the malformation group (97%, 32/33) was significantly higher than that in the trauma group (77.3%, 17/22) (P < .05), whereas there was no significant difference in the percentage changes of root length, root width, and apical diameter between the 2 groups. Six cases (6/55, 10.9%) showed no significant root development (type IV-V) (1 in the malformation group and 5 in the trauma group). Six cases (6/55, 10.9%) revealed intracanal calcification. CONCLUSIONS: RET achieved reliable outcomes regarding the healing of apical periodontitis and continued root development. The etiology seems to influence the outcome of RET. Malformation cases presented with a better prognosis than trauma cases after RET.

Built-up sodium alginate/chlorhexidine multilayer coating on dental implants with initiating anti-infection and cyto-compatibility sequentially for soft-tissue sealing.

Soft-tissue sealing at transmucosal sites is very important for preventing the invasion of pathogens and maintaining the long-term stability and function of dental implants. However, the colonization of oral pathogens on the implant surface and surrounding soft tissues can disturb the early establishment of soft-tissue sealing and even induce peri-implant infection. The purpose of this study was to construct two antibacterial coatings with 5 or 10 sodium alginate/chlorhexidine bilayers on titanium surfaces using layer-by-layer self-assembly technology to promote soft-tissue sealing. The corresponding chemical composition, surface topography, wettability and release behaviour were investigated to prove that the resultant coating of sodium alginate and chlorhexidine was coated on the porous titanium surface. In-vitro and in-vivo antibacterial results showed that both prepared coatings inhibited or killed the bacteria on their surfaces and the surrounding areas to prevent plaque biofilm formation, especially the coating with 10 bilayers. Although both coatings inhibited the initial adhesion of fibroblasts, the cytocompatibility gradually improved with coating degradation. More importantly, both coatings achieved cell adhesion and proliferation in an in-vitro bacterial environment and effectively alleviated bacteria-induced subcutaneous inflammation in-vivo. Therefore, this study demonstrated that the multilayered coating could prevent implant-related infections in the initial stage of implant surgery and then improve soft-tissue integration with implant devices.

A dual functional polypeptide with antibacterial and anti-inflammatory properties for the treatment of periodontitis.

Periodontitis has been reported as the sixth most prevalent disease in human beings. This destructive disease is closely related to systemic diseases. Existing local drug delivery systems for periodontitis suffer from poor antibacterial effect and drug resistance. Inspired by the pathogenesis of periodontitis, we implemented a strategy to construct a dual functional polypeptide LL37-C15, which exhibited remarkable antibacterial effect against P. gingivalis and A. actinomycetemcomitans. In addition, LL37-C15 inhibits the release of pro-inflammatory cytokines by controlling the inflammatory pathway and reversing macrophage M1. Furthermore, the anti-inflammatory effect of LL37-C15 was also verified in vivo in a periodontitis rat model through the morphometry and histological observations of alveolar bone, hematoxylin-eosin, and Trap staining in gingival tissue. The results of molecular dynamics simulations showed that LL37-C15 could selectively destroy the bacterial cell membrane and protect the animal cell membrane in a self-destructive manner. The results showed that the polypeptide LL37-C15, as a novel promising therapeutic agent, exhibited a great potential for the periodontitis management. What's more, this dual functional polypeptide provides a promising strategy for building a multifunctional therapeutic platform against the inflammation and other diseases.

EDTA-functionalized silica nanoparticles as a conditioning agent for dentin bonding using etch-and-rinse technique.

OBJECTIVE: This study investigated the possibility of using ethylenediaminetetraacetic acid functionalized silica nanoparticles (EDTA-SiO2) as a dentin-conditioning agent using etch-and-rinse technique to promote the durability of dentin bonding. METHODS: The SiO2-EDTA were synthesized by N- [(3- trimethoxysilyl) propyl] ethylenediamine triacetic acid (EDTA-TMS) and SiO2 (50 nm), then characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The capacity of SiO2-EDTA to chelate calcium ions from dentin was examined by inductively coupled plasma-optic emission spectrometry (ICP-OES). The dentin surfaces conditioned with SiO2-EDTA were detected by field emission scanning electron microscopy (SEM), TEM and microhardness testing. For dentin bonding, dentin surfaces were adopted wet- or dry-bonding technique and bonded with adhesive (AdperTM Single Bond2) and applied composite resin (Filtek Z350) on them. The durability of dentin bonding was evaluated by mircotensile bond strength test, in-situ zymography and nanoleakage testing. RESULTS: FTIR, TGA and XPS results showed that SiO2-EDTA contained N element and carboxyl groups. SEM, TEM and microhardness results indicated that SiO2-EDTA group created extrafibrillar demineralization and retained more intrafibrillar minerals within dentin surface. In the dentin bonding experiment, SiO2-EDTA group achieved acceptable bond strength, and reduced the activity of matrix metalloproteinase and nanoleakage along bonding interface. CONCLUSION: It was possible to generate a feasible dentin conditioning agent (SiO2-EDTA), which could create dentin extrafibrillar demineralization and improve dentin bond durability. CLINICAL SIGNIFICANCE: This study introduces a new dentin conditioning scheme based on SiO2-EDTA to create extrafibrillar demineralization for dentin bonding. This strategy has the potential to be used in clinic to promote the life of restoration bonding.

Oxidized Dopamine Acrylamide Primer to Achieve Durable Resin-Dentin Bonding.

The durability of the resin-dentin bonding interface is a key issue in clinical esthetic dentistry. Inspired by the extraordinary bioadhesive properties of marine mussels in a wet environment, we designed and synthetized N-2-(3,4-dihydroxylphenyl) acrylamide (DAA) according to the functional domain of mussel adhesive proteins. DAA's properties of collagen cross-linking, collagenase inhibition, inducing collagen mineralization in vitro, and as a novel prime monomer for clinical dentin adhesion use, its optimal parameters, and effect on the adhesive longevity and the bonding interface's integrity and mineralization, were evaluated in vitro and in vivo. The results showed that oxide DAA can inhibit the activity of collagenase and cross collagen fibers to improve the anti-enzymatic hydrolysis of collagen fibers and induce intrafibrillar and interfibrillar collagen mineralization. As a primer used in the etch-rinse tooth adhesive system, oxide DAA can improve the durability and integrity of the bonding interface by anti-degradation and mineralization of the exposed collagen matrix. Oxidized DAA (OX-DAA) is a promising primer for improving dentin durability; using 5% OX-DAA ethanol solution and treating the etched dentin surface for 30 s is the optimal choice when used as a primer in the etch-rinse tooth adhesive system.

A homogeneous dopamine-silver nanocomposite coating: striking a balance between the antibacterial ability and cytocompatibility of dental implants.

Silver has been widely used for surface modification to prevent implant-associated infections. However, the inherent cytotoxicity of silver greatly limited the scope of its clinical applications. The construction of surfaces with both good antibacterial properties and favorable cytocompatibility still remains a challenge. In this study, a structurally homogeneous dopamine-silver (DA/Ag) nanocomposite was fabricated on the implant surface to balance the antibacterial activity and cytocompatibility of the implant. The results show that the DA/Ag nanocomposites prepared under the acidic conditions (pH = 4) on the titanium surface are homogeneous with higher Ag+ content, while an obvious core (AgNPs)-shell (PDA) structure is formed under neutral (pH = 7) and alkaline conditions (pH = 10), and the subsequent heat treatment enhanced the stability of PDA-AgNPs nanocomposite coatings on porous titanium. The antibacterial test, cytotoxicity test, hypodermic implantation and osteogenesis test revealed that the homogeneous PDA-AgNPs nanocomposite coating achieved the balance between the antibacterial ability and cytocompatibility, and had the best outcomes for soft tissue healing and bone formation around the implants. This study provides a facile strategy for preparing silver-loaded surfaces with both good antibacterial effect and favorable cytocompatibility, which is expected to further improve the therapeutic efficacy of silver composite-coated dental implants.

Immature permanent incisors with complicated crown fractures treated with partial pulpotomy using white mineral trioxide aggregate and IRoot BP plus-a retrospective long-term study.

BACKGROUND/AIMS: Calcium silicate cements have been widely used for pulpotomies in immature permanent teeth with complicated crown fractures due to their superior properties. However, few studies have evaluated the long-term outcomes of white mineral trioxide aggregate (WMTA) and iRoot BP Plus for partial pulpotomies. The aim of this study was to investigate the long-term clinical and radiographic outcomes of WMTA and iRoot BP Plus for partial pulpotomies in immature permanent incisors with complicated crown fractures. MATERIALS AND METHODS: Children who had partial pulpotomies of immature permanent incisors with complicated crown fractures using WMTA or iRoot BP Plus as capping agents were enrolled. Eighty immature permanent incisors in 68 children (aged 8-13 years) were included. They were divided into two groups (WMTA and iRoot BP Plus) according to the capping agents. Clinical and radiographic information was collected during a 5-year follow-up period. Study data were analyzed using Chi-square tests or Fisher exact tests. RESULTS: The clinical and radiographic success rates in the WMTA (n = 36) and iRoot BP Plus groups (n = 44) were 94.4% versus 97.7% and 88.9% versus 97.7%, respectively (both p < .05). The average observation period was 74.5 ± 13.2 months and 61.9 ± 1.6 months in the WMTA and iRoot BP Plus groups, respectively (p < .01). Five cases presented with periapical radiolucencies. The WMTA group had four cases of pulp canal calcification (11.1%), while the iRoot BP Plus group had two cases (4.6%). There was crown discolouration in all cases in the WMTA group, but none in the iRoot BP Plus group. CONCLUSION: Both WMTA and iRoot BP Plus had favorable outcomes in promoting physiological development and maintaining the basic functions of immature permanent incisors with complicated crown fractures. As a partial pulpotomy material, iRoot BP Plus may be more suitable for the esthetic zone than WMTA.

Synthesis of a novel injectable alginate impression material and impression accuracy evaluation.

OBJECTIVES: This work aimed to synthesize a novel injectable alginate impression material and evaluate its accuracy. METHODS: Certain proportions of sodium alginate, trisodium phosphate dodecahydrate, potassium fluorotitanate, diatomaceous earth, and other ingredients were dissolved in water and mixed evenly with a planetary centrifugal mixer to obtain a certain viscosity base paste. Certain proportions of calcium sulfate hemihydrate, magnesium oxide, glycerin, and polyethylene glycol (PEG) 400 were mixed evenly with a planetary centrifugal mixer to obtain the reactor paste with the same viscosity as the base paste. The base and reactor pastes were poured into a two-cylinder cartridge at a 2∶1 volume ratio. A gun device was used to accomplish mixing by compressing materials into a mixing tip. The samples were divided into three groups: injectable alginate impression materials (IA group) as the experimental group, and Jeltrate alginate impression materials (JA group) and Silagum-putty/light addition silicone rubber impression materials (SI group) as the two control groups. RESULTS: Scanning electron microscopy (SEM) showed that the injectable alginate impression materials had a denser structure and fewer bubbles than the commercial alginate impression material. The accuracy of the three kinds of impression materials was evaluated by 3D image superposition. The deviations between the three test group models and the standard model (trueness) were 49.58 µm±1.453 µm (IA group), 54.75 µm±7.264 µm (JA group), and 30.92 µm±1.013 µm (SI group). The deviations of the models within each test group (precision) were 85.79 µm±8.191 µm (IA group), 97.65 µm±11.060 µm (JA group), and 56.51 µm±4.995 µm (SI group). Significant differences in trueness and precision were found among the three kinds of impression materials (P<0.05). CONCLUSIONS: The accuracy of the new injectable alginate impression material was better than that of the traditional powder-type alginate impression material but worse than that of the addition silicone rubber impression materials. The novel injec-table alginate impression material demonstrated good operation performance and impression accuracy, showing broad application prospect.

Efficacy of the dual-action GA-KR12 peptide for remineralising initial enamel caries: an in vitro study.

OBJECTIVE: To investigate the antibiofilm and remineralising effects of the dual-action peptide GA-KR12 on artificial enamel caries. MATERIALS AND METHODS: Enamel blocks with artificial caries were treated with sterilised deionised water as control or GA-KR12. The blocks underwent biochemical cycling with Streptococcus mutans for 3 weeks. The architecture, viability, and growth kinetics of the biofilm were determined, respectively, by scanning electron microscopy (SEM), confocal laser scanning microscopy, and quantitative (culture colony-forming units, CFUs). The mineral loss, calcium-to-phosphorus ratio, surface morphology, and crystal characteristics of the enamel surface were determined, respectively, using micro-computed tomography, energy dispersive spectroscopy, SEM, and X-ray diffraction (XRD). RESULTS: SEM showed confluent growth of S. mutans in the control group but not in the GA-KR12-treated group. The dead-to-live ratios of the control and GA-KR12-treated groups were 0.42 ± 0.05 and 0.81 ± 0.08, respectively (p < 0.001). The log CFUs of the control and GA-KR12-treated groups were 8.15 ± 0.32 and 6.70 ± 0.49, respectively (p < 0.001). The mineral losses of the control and GA-KR12-treated groups were 1.39 ± 0.09 gcm-3 and 1.19 ± 0.05 gcm-3, respectively (p < 0.001). The calcium-to-phosphorus molar ratios of the control and GA-KR12-treated groups were 1.47 ± 0.03 and 1.57 ± 0.02, respectively (p < 0.001). A uniformly remineralised prismatic pattern on enamel blocks was observed in the GA-KR12-treated but not in the control group. The hydroxyapatite in the GA-KR12-treated group was better crystallised than that in the control group. CONCLUSION: The dual-action peptide GA-KR12 inhibited the growth of S. mutans biofilm and promoted the remineralisation of enamel caries. CLINICAL RELEVANCE: GA-KR12 potentially is applicable for managing enamel caries.

Synergistic effects of graphene quantum dots and carbodiimide in promoting resin-dentin bond durability.

OBJECTIVE: Resin-based dental adhesion is mostly utilized in minimally invasive operative dentistry. However, improving the durability and stability of resin-dentin bond interfaces remain a challenge. Graphene quantum dots (GQDs) reinforced by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) were introduced to modify the resin-dentin bond interfaces, thereby promoting their durability and stability. METHODS: GQDs, EDC, and EDC+GQDs groups were designed to evaluate the effects of GQDs and EDC on collagenase activity, the interaction of GQDs with collagen, and the resin-dentin interface. First, the effects of GQDs and EDC on collagenase activity was evaluated by Collagenase (EC 3.4.24.3) reacting with its substrate. The interaction of GQDs and EDC with collagen were evaluated by cross-linking degree analysis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, attenuated total reflection Fourier transform infrared spectroscopy and enzymatic hydrolysis. Second, the acid-etched and rinse adhesive system was used to evaluate the resin-dentin bond on the basis of microtensile bond strength, in situ zymography and fluorescence confocal laser scanning microscopy. RESULTS: GQDs could inhibit collagenase activity. GQDs with the aid of EDC could cross-link collagen via covalent bonds and improve the anti-enzymatic hydrolysis of collagen. In the resin-dentin adhesion model, the µTBS of the EDC+GQDs group was significantly higher than the other control groups after thermocycling. The addition of EDC to GQDs could inhibit matrix metalloproteinase activity and promote the integrity of the bonding interfaces after thermocycling. SIGNIFICANCE: This study presents a novel strategy to modify the resin-dentin interface and provides a new application for GQDs. This strategy has the potential to improve the durability of resin-based restoration in dentistry.

A Dopamine Acrylamide Molecule for Promoting Collagen Biomimetic Mineralization and Regulating Crystal Growth Direction.

The reconstruction of the intra/interfibrillar mineralized collagen microstructure is extremely important in biomaterial science and regeneration medicine. However, certain problems, such as low efficiency and long period of mineralization, are apparent, and the mechanism of interfibrillar mineralization is often neglected in the present literature. Thus, we propose a novel model of biomimetic collagen mineralization that uses molecules with the dual function of cross-linking collagen and regulating collagen mineralization to construct the intrafibrillar and interfibrillar collagen mineralization of the structure of mineralized collagen hard tissues. In the present study completed in vitro, N-2-(3,4-dihydroxyphenyl) acrylamide (DAA) is used to bind and cross-link collagen molecules and further stabilize the self-assembled collagen fibers. The DAA-collagen complex provides more affinity with calcium and phosphate ions, which can reduce the calcium phosphate/collagen interfacial energy to promote hydroxyapatite (HA) nucleation and accelerate the rate of collagen fiber mineralization. Besides inducing intrafibrillar mineralization, the DAA-collagen complex mineralization template can realize interfibrillar mineralization with the c-axis of the HA crystal on the surface of collagen fibers and between fibers that are parallel to the long axis of collagen fibers. The DAA-collagen complex, as a new type of mineralization template, may provide a new collagen mineralization strategy to produce a mineralized scaffold material for tissue engineering or develop bone-like materials.

Remineralising dentine caries using an artificial antimicrobial peptide: An in vitro study.

OBJECTIVE: To investigate the antibacterial and remineralising effects of a novel dual-action antimicrobial peptide, GA-KR12, on artificial dentine caries. METHODS: Human dentine blocks with artificial carious lesions were allocated to two groups - Group 1: dentine blocks treated with the novel antimicrobial peptide GA-KR12 twice daily; Group 2: dentine blocks received water as the negative control. Two groups underwent Streptococcus mutan biofilm-remineralisation cycles at 37 °C for 7 days. The morphology, viability and growth kinetics of the S. mutans biofilm were evaluated by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and colony-forming unit (CFU) counting, respectively. The dentine blocks' lesion depths and mineral loss, changes in chemical structure, dentine surface morphology and crystal characteristics were determined using micro-computed tomography, Fourier transform infrared (FTIR), SEM and X-ray diffraction (XRD), respectively. RESULTS: The surface of the dentine blocks in Group 1 was partially covered by S. mutans with damaged cell structure. Group 2 showed affluent growth of S. mutans covering the dentine surface when compared to Group 1. The dead-to-live ratio of Group 1 and Group 2 were 0.78 ± 0.01 and 0.47 ± 0.08, respectively (p < 0.001). The Log CFUs of Group 1 and Group 2 were 7.14 ± 0.30 and 8.24 ± 0.20, respectively (p < 0.001). The lesion depths of Group 1 and Group 2 were 109 ± 1 µm and 135 ± 3 µm, respectively (p < 0.001). The mineral loss of Group 1 and Group 2 were 0.59 ± 0.08 gHApcm-3 and 0.81 ± 0.07 gHApcm-3, respectively (p < 0.001). FTIR showed the amide I-to-hydrogen phosphate (HPO42-) ratios of Group 1 and Group 2 were 0.25 ± 0.05 and 0.39 ± 0.05 (p < 0.001), respectively. SEM images showed Group 1 had less exposed dentine collagen fibres than Group 2. The XRD revealed that the hydroxyapatite in Group 1 was well crystalised. CONCLUSION: This study demonstrated that the novel antimicrobial peptide GA-KR12 inhibited the growth of S. mutans biofilm and enhanced the remineralisation of artificial dentine caries.

A novel dual-action antimicrobial peptide for caries management.

OBJECTIVES: To develop a novel dual-action peptide with antimicrobial and mineralising properties. METHODS: A novel peptide, namely GA-KR12, was synthesised through grafting gallic acid to KR12. The secondary structure of GA-KR12 was evaluated by circular dichroism spectroscopy. The stability was evaluated by high-performance liquid chromatography. The cytotoxicity was evaluated by a mitochondrial dehydrogenase activity assay. The antimicrobial properties against common cariogenic species were evaluated by minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC). The morphology of cariogenic species was analysed by transmission electron microscope (TEM). To assess the mineralising effect of GA-KR12 on enamel, the lesion depths, mineral loss, surface morphology, calcium-to-phosphorus ratio and crystal characteristics were determined using micro-computed tomography, scanning electron microscopy (SEM) and energy dispersive spectroscopy X-ray diffraction, respectively. RESULTS: GA-KR12 did not exhibit cytotoxicity against HGF. Around 82% of the GA-KR12 remained in human saliva at 37°C for 1 h. The MIC and MBC/MFC against the tested species were 10-320 µM and 20-1,280 µM, respectively. GA-KR12 induced remarkable morphological defects in the tested species. The enamel treated with GA-KR12 had smaller lesion depths (p < 0.001), less mineral loss (p < 0.001) and higher calcium-to-phosphorus molar ratios (p < 0.001) than those in the enamel treated with water. SEM showed a well-organised prism pattern in enamel treated with GA-KR12. X-ray diffraction revealed that the hydroxyapatite on the enamel treated with GA-KR12 was better crystalised. CONCLUSIONS: This study developed a biocompatible and stable peptide which inhibited the growth of cariogenic species and mineralised the enamel caries. CLINICAL SIGNIFICANCE: The novel dual-action peptide, GA-KR12, is potential applicable in the management of caries.

Enamel-like tissue regeneration by using biomimetic enamel matrix proteins.

Enamel regeneration currently -is limited by our inability to duplicate artificially its complicated and well-aligned hydroxyapatite structure. The initial formation of enamel occurs in enamel organs where the ameloblasts secret enamel extracellular matrix formed a unique gel-like microenvironment. The enamel extracellular matrix is mainly composed by amelogenin and non-amelogenin. In this study, an innovative strategy was proposed to regenerate enamel-like tissue by constructing a microenvironment using biomimetic enamel matrix proteins (biomimetic EMPs) composed of modified leucine-rich amelogenin peptide (mLRAP) and non-amelogenin analog (NAA). Impressively, the regenerated enamel in this biomimetic EMPs on etched enamel surface produced prismatic structures, and showed similar mechanical properties to natural enamel. The results of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) showed that regenerated crystal was hydroxyapatite. Molecular dynamics simulation analysis showed the binding energy between mLRAP and NAA were electrostatic forces and Van der Walls. These results introduced a promising strategy to induce crystal growth of enamel-like hydroxyapatite for biomimetic reproduction of materials with complicated hierarchical microstructures.