Vanadate-Mediated Mismatch Configuration over the Reconstructed Nickel-Iron Electrocatalyst for Boosting Alkaline Oxygen Evolution.

During the oxygen evolution reaction (OER), catalyst candidates that can fully trigger self-reconstruction to derive active species with favorable configurations are expected to overcome the sluggish reaction kinetics. Herein, we innovatively propose the introduction of heterogeneous vanadate dopants into nickel-iron alloy precatalysts, where the crystal mismatch structure induces local electron delocalization in the hexagonal close packed alloy phase, thereby facilitating adequate electrochemical reconstruction to form (oxy)hydroxides as the real catalytic species. Simultaneously, the participation of vanadate in the reconstruction also triggers mismatch in the derived (oxy)hydroxides, reinforcing the metal-oxygen covalence, so that lattice oxygen activation is kinetically favorable and facilitates the OER via the lattice oxygen pathway. Optimized reconstructed catalyst r-NiFeVOx-NF exhibits a low overpotential of 220 mV at current densities of 10 mA cm-2 and considerably stable operation. Our study opens up opportunities for achieving robust OER performance through the design and fabrication of the mismatch catalytic configuration.

Proteomic study of localized tissue necrosis by Naja atra venom.

Naja atra bites often result in immediate and severe illness. The venom of N. atra contains a complex mixture of toxins that can cause significant damage to the patient's skin tissue. If left untreated, this condition can progress to localized necrosis, potentially resulting in impairment or even amputation in severe cases. Despite the known effects of the venom, the exact mechanisms underlying this tissue necrosis are not fully understood. This study aimed to investigate the protein components responsible for tissue necrosis induced by N. atra venom at both the organism-wide and molecular levels. To achieve this, venom was injected into Bama miniature pigs to cause ulcers, and exudate samples were collected at various time points after injection. Label-free proteomics analysis identified 1119, 1016, 938, 864, and 855 proteins in the exudate at 6, 12, 24, 36, and 48 h post-injection, respectively. Further analysis revealed 431 differentially expressed proteins, with S100A8, MMP-2, MIF, and IDH2 identified as proteins associated with local tissue necrosis. In this study, we established a Bama miniature pig model for N. atra venom injection and performed proteomic analysis of the wound exudate, which provides important insights into the molecular pathology of snakebite-induced tissue necrosis and potential theoretical bases for clinical treatment. Proteomic data from this study can be accessed through ProteomeXchange using the identifier PXD052498.

Oroxylin A suppresses breast cancer-induced osteoclastogenesis and osteolysis as a natural RON inhibitor.

BACKGROUND: Malignant breast cancer cells trigger the over-activation of osteoclast precursor cells, leading to bone loss and severe pain. Targeted inhibition of osteoclast differentiation has emerged as an important strategy for treating bone syndromes induced by breast cancer. PURPOSE: The objective is to discover natural osteoclast inhibitor to treat osteoclastogenesis and bone destruction induced by breast cancer, and clarify the specific mechanisms. METHODS: Recepteur d'origine Nantais (RON) protein was employed to search the natural osteoclast inhibitor for breast cancer-induced osteoclastogenesis by molecular docking, molecular dynamics simulation and cellular thermal shift assay (CETSA). In the in vitro experiment, breast cancer MDA-MB-231 cell-conditioned medium (MDA-MB-231 CM) was used to induce osteoclastogenesis in murine bone marrow-derived macrophages (BMMs), aiming to elucidate the effects and mechanisms of the natural osteoclast inhibitor. In the in vivo model, MDA-MB-231 cells was injected into the mouse tibia to evaluate the therapeutic effect of drug on breast cancer-induced bone destruction. RESULTS: We discovered a significant increase in the expression of RON during MDA-MB-231 CM-induced osteoclast differentiation in vitro. Molecular docking analysis found that oroxylin A (OA), a flavonoid derived from the Chinese medicine Scutellaria baicalensis Georgi, showed binding ability with RON, while its impact and mechanism on breast cancer-induced osteoclastogenesis and osteolysis remains unclear. Molecular dynamics simulation and CETSA further revealed that OA bound directly to the RON protein, and it also decreased RON expression in breast cancer CM-induced osteoclastogenesis. Correspondingly, OA suppressed the MDA-MB-231 CM-induced osteoclastogenesis and bone resorption in vitro. The downstream signals of RON including Src and NFATc1, as well as the osteoclast-specific genes, were downregulated by OA. Of interesting, the suppressive effect of OA on osteoclastogenesis induced by MDA-MB-231 CM was abolished after RON was knocked down by the specific RON-siRNA, this further confirmed that OA showed inhibitory effects on osteoclasts through targeting RON. In addition, we found that OA attenuated MDA-MB-231 cell-induced osteolysis and reduced the number of osteoclasts in vivo. CONCLUSION: Our results indicate that OA acts as a natural RON inhibitor to suppress breast cancer-induced osteoclastogenesis and osteolysis. This provides new strategy for treating breast cancer-induced bone destruction and related syndromes.

Nitrogen, sulfur co-coordinated iron single-atom catalysts with the optimized electronic structure for highly efficient oxygen reduction in Zn-air battery and fuel cell.

Atomically dispersed iron-nitrogen-carbon (FesbndNsbndC) materials have been considered ideal catalysts for the oxygen reduction. Unfortunately, designing and adjusting the electronic structure of single-atom Fe sites to boost the kinetics and activity still faces grand challenges. In this work, the coordination environment engineering is developed to synthesize the FeSA/NSC catalyst with the tailored N, S co-coordinated Fe atomic site (Fe-N3S site). The structural characterizations and theoretical calculations demonstrate that the incorporation of sulfur can optimize the charge distribution of Fe atoms to weaken the adsorption of OH* and facilitate the desorption of OH*, thus leading to enhanced kinetics process and intrinsic activity. As a result, the S-modified FeSA/NSC exhibits outstanding catalytic activity with the half-wave potentials (E1/2) of 0.915 V and 0.797 V, as well as good stability, in alkaline and acidic electrolytes, respectively. Impressively, the excellent performance of FeSA/NSC is further confirmed in Zn-air batteries (ZABs) and fuel cells, with high peak power densities (146 mW cm-2 and 0.259 W cm-2).

Research on Physiological Characteristics and Differential Gene Expression of Rice Hybrids and Their Parents under Salt Stress at Seedling Stage.

Soil salinization is one of the most important abiotic stresses which can seriously affect the growth and development of rice, leading to the decrease in or even loss of a rice harvest. Increasing the rice yield of saline soil is a key issue for agricultural production. The utilization of heterosis could significantly increase crop biomass and yield, which might be an effective way to meet the demand for rice cultivation in saline soil. In this study, to elucidate the regulatory mechanisms of rice hybrids and their parents that respond to salt stress, we investigated the phenotypic characteristics, physiological and biochemical indexes, and expression level of salt-related genes at the seedling stage. In this study, two sets of materials, encapsulating the most significant differences between the rice hybrids and their parents, were screened using the salt damage index and a hybrid superiority analysis. Compared with their parents, the rice hybrids Guang-Ba-You-Hua-Zhan (BB1) and Y-Liang-You-900 (GD1) exhibited much better salt tolerance, including an increased fresh weight and higher survival rate, a better scavenging ability towards reactive oxygen species (ROS), better ionic homeostasis with lower content of Na+ in their Na+/K+ ratio, and a higher expression of salt-stress-responsive genes. These results indicated that rice hybrids developed complex regulatory mechanisms involving multiple pathways and genes to adapt to salt stress and provided a physiological basis for the utilization of heterosis for improving the yield of rice under salt stress.

Erianin serves as an NFATc1 inhibitor to prevent breast cancer-induced osteoclastogenesis and bone destruction.

INTRODUCTION: Breast cancer-related bone metastasis can lead to skeletal-related events (SREs), which decrease patient quality of life. Inhibition of osteoclastogenesis is a key treatment for SREs; however, the availability of clinical drugs remains limited, and all existing ones disrupt physiological bone formation, while exhibiting no effect on patient survival time. OBJECTIVES: This study aimed to identify a novel osteoclast inhibitor for the treatment of breast cancer-induced SREs. METHODS: The MDA-MB-231 breast cancer cell-induced bone loss model was used to investigate the therapeutic effects of erianin in vivo. Then, we evaluated the inhibitory effects of erianin on osteoclastogenesis and signalling in bone marrow-derived macrophages (BMMs) induced by conditioned medium from MDA-MB-231 breast cancer cells (231 CM) and receptor activator of nuclear factor-κB ligand (RANKL) in vitro. Next, a Cellular Thermal Shift Assay and siRNA-mediate knockdown were performed, to investigate the target of erianin during osteoclast formation. The effects of erianin on human osteoclastogenesis were evaluated using CD14+ monocytes obtained from patients with breast cancer. RESULTS: Erianin effectively improved breast cancer cells-induced bone destruction at doses of 2 and 20 mg/kg/day in vivo, while suppressing osteoclastogenesis and the upregulation of SRC-NFATc1, INTEGRIN ß3-MMP9 signals induced by 231 CM and RANKL in vitro. Furthermore, erianin interacted with NFATc1 but not SRC, and Nfatc1 knockdown eliminated the inhibitory effects of erianin on osteoclastogenesis. Notably, lower expression of NFATc1 positively correlated with longer survival in patients with cancer and a high risk of bone metastasis. We further revealed that 62.5-250 nM erianin suppresses NFATc1 and excessive osteoclastogenesis in CD14+ monocytes from patients with breast cancer. CONCLUSION: Erianin acts as an NFATc1 inhibitor that attenuates breast cancer-induced osteoclastogenesis and bone destruction.

High selective electrocatalytic reduction of carbon dioxide to ethylene enabled by regulating the microenvironment over Cu-Ag nanowires.

Copper-based tandem catalysts are effective candidates for yielding multi-carbon (C2+) products in electrochemical reduction of carbon dioxide (CO2RR). However, these catalysts still face a significant challenge regarding in the low selectivity for the production of a specific product. In this study, we report a high selectivity of 77.8 %±2 % at -1.0 V (vs RHE) for the production of C2H4 by using a Cu88Ag12NW catalyst which is primarily prepared through a combined Cu-Ag co-deposition and wet chemical method, employing an attractive strategy focused on regulating the microenvironment over Cu-Ag nanowires. The experimental and computational studies show that the higher *CO coverage and lower intermediate adsorption energy are important reasons for achieving the high C2H4 selectivity of Cu88Ag12NW catalyst. Comsol simulation results indicate that dense nanowires exhibit a nano-limiting effect on OH- ions, thereby leading to an increase in local pH and promoting coupling reactions. The catalyst demonstrates no noticeable decrease in current density or selectivity even after 12 h of continuous operation. The Cu-Ag nanowire composite exhibits remarkable catalytic activity, superior faradaic efficiency, excellent stability, and easy synthesis, which highlights its significant potential for electro-reducing carbon dioxide into valuable products.

Immune-Cell-Based Therapy for COVID-19: Current Status.

Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has become a global pandemic. The interplay between innate and adaptive immune responses plays a crucial role in managing COVID-19. Cell therapy has recently emerged as a promising strategy to modulate the immune system, offering immense potential for the treatment of COVID-19 due to its customizability and regenerative capabilities. This review provides an overview of the various subsets of immune cell subsets implicated in the pathogenesis of COVID-19 and a comprehensive summary of the current status of immune cell therapy in COVID-19 treatment.

Flot2 deficiency facilitates B cell-mediated inflammatory responses and endotoxic shock.

Sepsis is a life-threatening disease characterized by multiple organ dysfunction. B cells play a pivotal role in sepsis. Here, we first observed the significantly reduced Flot2 gene expression in B cells from patients with bacterial sepsis and endotoxin-induced septic mice. However, the effects of Flot2 on sepsis and B-cell immunity remain unknown. Thus, we sorted B cells from Flot2 knockout (Flot2-/- ) mice, RNA-seq revealed significantly upregulated effector B cell (Beff) cytokines such as Il6, Il1b and Cxcl10 after Flot2 deficiency, while it showed no effect on the expression of regulatory B cell (Breg) cytokines such as Il10, Tgfb. Consistently, elevated Beff cytokine IL-6 and unchanged Breg cytokine IL-10 were shown in B cells from Flot2-/- mice. Similar results were subsequently observed in B cell-specific Flot2 knockout chimeric mice. Notably, Flot2 deficiency aggravated sepsis with increased lung injury and shortened survival time in vivo by facilitating Beffs but not Bregs. Taken together, our data identify Flot2 as a novel controller of B cells, Flot2 deficiency amplifies inflammation by affecting Beffs to participate in the pathogenesis and progression of sepsis.

Experimental and Theoretical Study of the New Leveler Basic Blue 1 during Copper Superconformal Growth.

A novel chlorinated functional group-modified triphenylmethane derivative leveler BB1 is used to achieve superconformal electrodeposition in microvias. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are performed to study the suppressing effect of BB1, while the convection-dependent adsorption of BB1 on the copper surface is analyzed by galvanostatic measurement, and a BB1 concentration window between 100 and 200 mg/L is beneficial for superfilling. The interactions among BB1, bis-(sodium sulfopropyl) disulfide (SPS), and poly(ethylene glycol) (PEG) are also investigated. Density functional theory (DFT) calculation and in situ Raman spectroscopy are coupled to study the suppression mechanism and synergistic suppression mechanism, namely, the adsorption effect between BB1 and copper substrate, as well as the coordination effect between the modified chlorinated functional group and Cu2+, is proposed. The copper layer becomes smoother and more compact with an increase in BB1 concentration, according to scanning electron microscopy (SEM) and atomic force microscopy (AFM), while X-ray diffraction (XRD) analysis shows that the introduction of BB1 is conducive to the formation of the copper (220) plane. Besides, the solution wettability is boosted by BB1. A copper interconnecting layer with high quality is achieved with 150 mg/L BB1, while the surface deposition thickness (SDT) is about 34 µm and filling percentages (FPs) for microvias with diameters of 100, 125, and 150 µm are 81.34, 82.72, and 81.39%, respectively.

Key Roles of Interfacial OH- ion Distribution on Proton Coupled Electron Transfer Kinetics Toward Urea Oxidation Reaction.

Enhancing alkaline urea oxidation reaction (UOR) activity is essential to upgrade renewable electrolysis systems. As a core step of UOR, proton-coupled electron transfer (PCET) determines the overall performance, and accelerating its kinetic remains a challenge. In this work, a newly raised electrocatalyst of NiCoMoCuOx Hy with derived multi-metal co-doping (oxy)hydroxide species during electrochemical oxidation states is reported, which ensures considerable alkaline UOR activity (10/500 mA cm-2 at 1.32/1.52 V vs RHE, respectively). Impressively, comprehensive studies elucidate the correlation between the electrode-electrolyte interfacial microenvironment and the electrocatalytic urea oxidation behavior. Specifically, NiCoMoCuOx Hy featured with dendritic nanostructure creates a strengthened electric field distribution. This structural factor prompts the local OH- enrichment in electrical double layer (EDL), so that the dehydrogenative oxidation of the catalyst is directly reinforced to facilitate the subsequent PCET kinetics of nucleophilic urea, resulting in high UOR performance. In practical utilization, NiCoMoCuOx Hy -driven UOR coupled cathodic hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO2 RR), and harvested high value-added products of H2 and C2 H4 , respectively. This work clarifies a novel mechanism to improve electrocatalytic UOR performance through structure-induced interfacial microenvironment modulation.

Polyphyllin VII protects from breast cancer-induced osteolysis by suppressing osteoclastogenesis via c-Fos/NFATc1 signaling.

Bone is a preferred metastatic site of advanced breast cancer and the 5-year overall survival rate of breast cancer patients with bone metastasis is only 22.8%. Targeted inhibition of osteoclasts can treat skeletal-related events (SREs) in breast cancer patients. Polyphyllin VII (PP7), a pennogenyl saponin isolated from traditional Chinese herb Paris polyphylla, exhibits strong anti-inflammatory and anti-cancer activities. In this study, we evaluated the effect of PP7 on metastatic breast cancer-induced bone destruction in vivo and the underlying mechanisms. We found that intraperitoneal injection of 1 mg/kg PP7 significantly ameliorated the breast cancer MDA-MB-231 cell-induced osteolysis in mice. Mechanistically, PP7 (0.125-0.5 µM) inhibited the conditioned medium of MDA-MB-231 cells (MDA-MB-231 CM)-induced osteoclast formation in bone marrow-derived macrophages (BMMs). Furthermore, PP7 markedly reduced MDA-MB-231 CM-induced osteoclastic bone resorption and F-actin rings formation in vitro. During MDA-MB-231 CM-induced osteoclastogenesis, the activation of c-Fos and NFATc1 signaling was significantly downregulated by PP7, and finally osteoclast-related genes such as Oscar, Atp6v0d2, Mmp9 and ß3 integrin were decreased. In addition, the formation of osteoblast was promoted by PP7 treatment. Our current findings revealed PP7 as a potential safe agent for preventing and treating bone destruction in breast cancer patients with bone metastases.

Bimetallic co-doping engineering over nickel-based oxy-hydroxide enables high-performance electrocatalytic oxygen evolution.

Enhancing the electrocatalytic oxygen evolution reaction (OER) performance is essential to realize practical energy-saving water electrolysis and CO2 electroreduction. Herein, we report a bimetallic co-doping engineering to design and fabricate nickel-cobalt-iron collaborative oxy-hydroxide on nickel foam that labeled as NiCoFeOxHy-NF. As expected, NiCoFeOxHy-NF exhibits an outstanding OER activity with current density of 10 mA cm-2 at 194 mV, Tafel slope of 53 mV dec-1, along with the robust long-term stability, which is significantly better than bimetallic NiCo and NiFe combinations. Comprehensive computational simulations and characterizations jointly unveil that the twisted ligand environment induced by heteroatoms ensures the balance strength between the metal-oxygen hybrid orbital states and the oxidized intermediates adsorption, thus lowering the oxygen cycling energy barriers for overcoming the sluggish OER kinetics. Moreover, a novel phase transition behavior is monitored by in-situ Raman spectra under OER operating conditions, which facilitates electron-mass transfer as well as boosts the exposure of activity sites. For practical applications, Ni2P-NF || NiCoFeOxHy-NF and Cu || NiCoFeOxHy-NF couples were constructed to realize high-efficiency water electrolysis and CO2 electrochemical reduction for the production of valuable H2 and C2H4, respectively. This work elucidates a novel mechanism by which bimetallic co-doping improves the electrocatalytic OER activity of nickel-based hydroxides.

Construction of Self-Supporting NiCoFe Nanotube Arrays Enabling High-Efficiency Alkaline Oxygen Evolution.

Enhancing the intrinsic activity and modulating the electrode-electrolyte interface microenvironment of nickel-based candidates are essential for breaking through the sluggish kinetics limitation of the oxygen evolution reaction (OER). Herein, a ternary nickel-cobalt-iron solid solution with delicate hollow nanoarrays architecture (labeled as NiCoFe-NTs) was designed and fabricated via a ZnO-templated electrodeposition strategy. Owing to the synergistic nanostructure and composition feature, NiCoFe-NT presents desirable alkaline OER performance, with a η10 and η500 of 187 and 310 mV, respectively, along with favorable long-term durability. In-depth analyses identify the heterogeneous nickel-based (oxy)hydroxide species derived from the oxidative reconstruction acting as an active contributor for oxygen evolution. Impressively, the regulatory mechanism of the catalytic performance by a rationally designed nanostructure was elucidated by compressive analyses; that is, the faster gas release processes induced by nanotube arrays can modulate the heterogeneous interface states during OER, which effectively facilitates the electrochemical charge-mass transfer to promote the reaction kinetics. To assess the practical feasibility, an alkaline water electrolyzer and a CO2 electrochemical reduction flow cell were constructed by coupling the anodic NiCoFe-NTs and cathodic nickel phosphides (Ni2P-NF) and metallic Cu electrocatalysts, respectively, both of which achieved high-efficiency operation.

Synergistic doping and structural engineering over dendritic NiMoCu electrocatalyst enabling highly efficient hydrogen production.

The development of non-precious metal electrocatalysts with remarkable activity is a major objective for achieving high-efficiency hydrogen generation. Here, a trimetallic electrocatalyst with a dendritic nanostructure, which is denoted as NiMoCu-NF, was fabricated on nickel foam via a gas-template electrodeposition strategy. By virtue of the metallic doping and structural optimization, NiMoCu-NF exhibits superior HER electrocatalytic activity with an overpotential of 52 mV at 10 mA cm-2. Additionally, the NiMoCu-NF-derived nickel-based (oxy)hydroxide species in the oxidation operating state deliver considerable electrocatalytic urea oxidation reaction (UOR) performance to match the efficient H2 generation, with a low voltage of 1.54 V to realize overall electrolysis at 50 mA cm-2. Impressively, combined experimental and simulation analysis demonstrate that the NiMoCu-NF with a favorable 3D nanostructure feature effectively regulates the heterogeneous interface states, inducing a "Gas Microfluidic Pumping" (GMP) effect that improved electron-mass transfer properties to accelerate the electrocatalytic reaction kinetics of either the HER or UOR.

Synergistic Interfacial and Doping Engineering of Heterostructured NiCo(OH)x-CoyW as an Efficient Alkaline Hydrogen Evolution Electrocatalyst.

To achieve high efficiency of water electrolysis to produce hydrogen (H2), developing non-noble metal-based catalysts with considerable performance have been considered as a crucial strategy, which is correlated with both the interphase properties and multi-metal synergistic effects. Herein, as a proof of concept, a delicate NiCo(OH)x-CoyW catalyst with a bush-like heterostructure was realized via gas-template-assisted electrodeposition, followed by an electrochemical etching-growth process, which ensured a high active area and fast gas release kinetics for a superior hydrogen evolution reaction, with an overpotential of 21 and 139 mV at 10 and 500 mA cm-2, respectively. Physical and electrochemical analyses demonstrated that the synergistic effect of the NiCo(OH)x/CoyW heterogeneous interface resulted in favorable electron redistribution and faster electron transfer efficiency. The amorphous NiCo(OH)x strengthened the water dissociation step, and metal phase of CoW provided sufficient sites for moderate H immediate adsorption/H2 desorption. In addition, NiCo(OH)x-CoyW exhibited desirable urea oxidation reaction activity for matching H2 generation with a low voltage of 1.51 V at 50 mA cm-2. More importantly, the synthesis and testing of the NiCo(OH)x-CoyW catalyst in this study were all solar-powered, suggesting a promising environmentally friendly process for practical applications.

Transition Metal and Nitrogen Co-Doped Carbon-based Electrocatalysts for the Oxygen Reduction Reaction: From Active Site Insights to the Rational Design of Precursors and Structures.

Considering the urgent requirement for clean and sustainable energy, fuel cells and metal-air batteries have emerged as promising energy storage and conversion devices to alleviate the worldwide energy challenges. The key step in accelerating the sluggish oxygen reduction reaction (ORR) kinetics at the cathode is to develop cost-effective and high-efficiency non-precious metal catalysts, which can be used to replace expensive Pt-based catalysts. Recently, the transition metal and nitrogen co-doped carbon (M-Nx /C) materials with tailored morphology, tunable composition, and confined structure show great potential in both acidic and alkaline media. Herein, the mechanism of ORR is provided, followed by recent efforts to clarify the actual structures of active sites. Furthermore, the progress of optimizing the catalytic performance of M-Nx /C catalysts by modulating nitrogen-rich precursors and porous structure engineering is highlighted. The remaining challenges and development prospects of M-Nx /C catalysts are also outlined and evaluated.

A theoretical study of atomically dispersed MN4/C (M = Fe or Mn) as a high-activity catalyst for the oxygen reduction reaction.

Carbon-based, non-noble metal catalysts for the oxygen reduction reaction (ORR) are crucial for the large-scale application of metal-air batteries and fuel cells. Density functional theory calculations were performed to explore the potential of atomically dispersed MN4/C (M = Fe or Mn) as an ORR catalyst in an acidic electrolyte and the ORR mechanism on MN4/C was systematically studied. The results indicated MN4 as the active site of MN4/C and a four-electron OOH transformation pathway as the preferred ORR mechanism on the MN4/C surface. The Gibbs free energy diagram showed that the rate-determining step of the FeN4/C and MnN4/C catalysts is the formation of the second H2O molecule and OOH*, respectively. FeN4/C exhibited higher thermodynamic limiting potential (0.79 V) and, thus, higher ORR activity than MnN4/C (0.52 V) in an acidic environment; its excellent catalytic performance is due to the nice electron structure and adsorption properties of the FeN4 site. Therefore, this work demonstrates that atomically dispersed MN4/C is a promising catalyst for the ORR.

Optimization of hierarchical structure and nanoscale-enabled plasmonic refraction for window electrodes in photovoltaics.

An ideal network window electrode for photovoltaic applications should provide an optimal surface coverage, a uniform current density into and/or from a substrate, and a minimum of the overall resistance for a given shading ratio. Here we show that metallic networks with quasi-fractal structure provides a near-perfect practical realization of such an ideal electrode. We find that a leaf venation network, which possesses key characteristics of the optimal structure, indeed outperforms other networks. We further show that elements of hierarchal topology, rather than details of the branching geometry, are of primary importance in optimizing the networks, and demonstrate this experimentally on five model artificial hierarchical networks of varied levels of complexity. In addition to these structural effects, networks containing nanowires are shown to acquire transparency exceeding the geometric constraint due to the plasmonic refraction.

Inexpensive transparent nanoelectrode for crystalline silicon solar cells.

We report an easily manufacturable and inexpensive transparent conductive electrode for crystalline silicon (c-Si) solar cells. It is based on a silver nanoparticle network self-forming in the valleys between the pyramids of a textured solar cell surface, transformed into a nanowire network by sintering, and subsequently "buried" under the silicon surface by a metal-assisted chemical etching. We have successfully incorporated these steps into the conventional c-Si solar cell manufacturing process, from which we have eliminated the expensive screen printing and firing steps, typically used to make the macro-electrode of conducting silver fingers. The resulting, preliminary solar cell achieved power conversion efficiency only 14 % less than the conventionally processed c-Si control cell. We expect that a cell with an optimized processing will achieve at least efficiency of the conventional commercial cell, but at significantly reduced manufacturing cost.