The Composition, Structure, and Functionalities of Prolamins from Highland Barley.

The composition, structure, and functionalities of prolamins from highland barley were investigated. These parameters were compared with those of the commonly applied prolamins (zein). There are more charged and hydrophilic amino acids in highland barely prolamins than zein. The molecular weight of highland barely prolamins was between 30 and 63 kDa, which was larger than that of zein (20 and 24 kDa). The main secondary structure of highland barely prolamins was ß-turn helices, while α-helical structures were the main secondary structure in zein. The water holding capacity, thermal stability, emulsifying capacity, and stability of prolamins from highland barley were significantly higher than in zein, while the opposite results were observed for oil absorption capacity between the two. The diameter of fibers prepared using highland barely prolamins was almost six times that of zein, while highland barely prolamins formed ribbon structures instead of fibers. Therefore, the results provide guidance for applications of prolamins from highland barley.

Progressive outcomes of bundle branch reentrant ventricular tachycardia in patients without structural heart disease.

BACKGROUND: Ablation strategies to treat bundle branch reentrant ventricular tachycardia (BBRT) are well described. However, reports of long-term follow-up outcomes in BBRT patients without structural heart disease (SHD) are limited. OBJECTIVE: The purpose of this study was to investigate the long-term follow-up prognosis of BBRT patients without SHD. METHODS: Changes in electrocardiographic and echocardiographic parameters were used to evaluate progression during follow-up. Potential pathogenic candidate variants were screened using a specific gene panel. RESULTS: Eleven consecutive BBRT patients without obvious SHD based on echocardiographic and cardiovascular magnetic resonance imaging results were enrolled. Median age was 20 (11-48) years, and median follow-up time was 72 months. During follow-up, PR interval [206 (158-360) ms vs 188 (158-300) ms; P = .018] and QRS duration [187 (155-240) ms vs 164 (130-178) ms; P = .008] each increased significantly compared with postablation. Right- and left-sided chamber dilation and reduced left ventricular ejection fraction (LVEF) also were observed. Clinical deterioration or events occurred in 8 patients: 1 sudden death; 3 both complete heart block and reduced LVEF; 2 significantly reduced LVEF; and 2 prolonged PR interval. Genetic testing results showed that 6 of 10 patients (excluding the patient with sudden death) had ≥1 potential pathogenic candidate variants. CONCLUSION: Further deterioration of His-Purkinje system conduction was observed in young BBRT patients without SHD after ablation. The His-Purkinje system may be the first target of genetic predisposition.

m6A writer WTAP targets NRF2 to accelerate bladder cancer malignancy via m6A-dependent ferroptosis regulation.

Recent evidence have indicated that ferroptosis, a novel iron-dependent form of non-apoptotic cell death, plays a critical role in human cancers. Besides, emerging literatures have revealed the ovel function of N6-methyladenosine (m6A) in bladder cancer physiological. However, the underlying mechanism of m6A on bladder cancer is still unclear. Here, present work revealed that m6A methyltransferase ('writer') WTAP up-regulated in bladder cancer tissue and cells, indicating the poor prognosis of bladder cancer patients. Functionally, gain/loss-of-functional experiments illustrated that WTAP promoted the viability of bladder cancer cells and inhibited the erastin-induced ferroptosis. Mechanistically, there was a remarkable m6A modification site on 3'-UTR of endogenous antioxidant factor NRF2 RNA and WTAP could install its methylation. Moreover, m6A reader YTHDF1 recognized the m6A site on NRF2 mRNA and enhanced its mRNA stability. Therefore, these findings demonstrated potential therapeutic strategyies for bladder cancer via m6A-dependent manner.

Binary Colloidal Crystals Promote Cardiac Differentiation of Human Pluripotent Stem Cells via Nuclear Accumulation of SETDB1.

Biophysical cues can facilitate the cardiac differentiation of human pluripotent stem cells (hPSCs), yet the mechanism is far from established. One of the binary colloidal crystals, composed of 5 µm Si and 400 nm poly(methyl methacrylate) particles named 5PM, has been applied as a substrate for hPSCs cultivation and cardiac differentiation. In this study, cell nucleus, cytoskeleton, and epigenetic states of human induced pluripotent stem cells on the 5PM were analyzed using atomic force microscopy, molecular biology assays, and the assay for transposase-accessible chromatin sequencing (ATAC-seq). Cells were more spherical with stiffer cell nuclei on the 5PM compared to the flat control. ATAC-seq revealed that chromatin accessibility decreased on the 5PM, caused by the increased entry of histone lysine methyltransferase SETDB1 into the cell nuclei and the amplified level of histone H3K9me3 modification. Reducing cytoskeleton tension using a ROCK inhibitor attenuated the nuclear accumulation of SETDB1 on the 5PM, indicating that the effect is cytoskeleton-dependent. In addition, the knockdown of SETDB1 reversed the promotive effects of the 5PM on cardiac differentiation, demonstrating that biophysical cue-induced cytoskeletal tension, cell nucleus deformation, and then SETDB1 accumulation are critical outside-in signal transformations in cardiac differentiation. Human embryonic stem cells showed similar results, indicating that the biophysical impact of the 5PM surfaces on cardiac differentiation could be universal. These findings contribute to our understanding of material-assistant hPSC differentiation, which benefits materiobiology and stem cell bioengineering.

The characteristics of pre-excitation syndrome concomitant with atrial tachyarrhythmia and the effect of radiofrequency ablation.

BACKGROUND: Wolff-Parkinson-White (WPW) concomitant with atrial tachyarrhythmia (ATA) has not been systemically characterized. METHODS: Detailed electroanatomical mapping of the right atrium (RA) and/or left atrium (LA) was performed using three-dimensional mapping and the accessory pathway (AP) was mapped. RESULTS: WPW syndrome with ATA was diagnosed in 11 patients (median age 60 years). The characteristic of unidirectional anterograde conduction over the AP was displayed in nine patients, six of whom were intermittent. Sustained atrial tachycardia, that is, counterclockwise atrial flutter (AFL) with a median tachycardia cycle length (TCL) of 225 (220-275) ms, was mapped in eight patients; furthermore, "figure 8" right atrial reentry was mapped with TCL 250 ms in one patient with a surgical history of ventricular septal defect repair. The remaining two patients underwent mitral annulus-dependent AT after paroxysmal atrial fibrillation (PAF) ablation and LA micro-reentry AT, respectively. In four patients, the location of the APs was left posterior. Left-lateral APs were identified in four patients. The locations of the APs in the remaining three patients were the right posterior and middle septum. All ATAs and APs were successfully ablated. After a median follow-up of 37 (15-72) months, no anterograde conduction over the AP was recorded, new onset of PAF was recorded in three patients, and all of them underwent circumferential pulmonary vein isolation. CONCLUSIONS: WPW with concomitant ATA frequently had continuous anterograde conduction over the AP with a rapid ventricular rate. Most WPWs displayed the characteristic of unidirectional anterograde conduction.

Microscopic Mechanical Model Analysis and Visualization Investigation of SiO2 Nanoparticle/HPAM Polymer Foam Liquid Film Displacing Heavy Oil.

In this paper, the microscopic mechanisms and macroscopic characteristics of polymer/nanoparticle foam flooding in a heavy oil reservoir environment were studied. Sodium dodecyl sulfate (SDS) surfactant was used as the foaming agent, and the foam was prepared by a combination of partially hydrolyzed polyacrylamide (HPAM) polymer and SiO2 nanoparticles. By performing experiments with the microscopic model, the foam flooding dynamics in the heavy oil reservoir were simulated. Based on the experiments, the formula model was established to evaluate the physicochemical effects between the foam liquid film and oil surface. Finally, the macroscopic characteristics of foam flooding were studied by performing oil displacement experiments with a 2D visual model. The microscopic experiments demonstrated that the foam liquid film could exert multiple actions, such as adsorption, stretching, and cutting on the heavy oil in the reservoir pores. These actions were accompanied by force changes between the foam and heavy oil, and the addition of polymer and nanoparticles further strengthened them. The calculations of the formula model indicated that the polymer and nanoparticles amplified the force between the foam liquid film and heavy oil by 1.95 and 2.2 times, respectively. The 2D visual model experiments suggested that foam flooding could further develop heavy oil after water flooding through its liquid film effects, and the oil recovery efficiency increased from 42.43 to 57.82%. In addition, the polymer and nanoparticles further optimized the oil displacement effect of the foam liquid film, which made the oil recovery efficiency reach 64.77-68.16%.

Bioinspired nacre-like PEEK material with superior tensile strength and impact toughness.

A bioinspired PEEK material with hard "bricks" of nanoscale lamellae and micron-scale deformed spherulites bonded by soft "mortar" of a rigid amorphous fraction was produced with a pressure-induced flow (PIF) processing applied in the solid-state. Novel mechanisms were proposed for the marked and simultaneous improvement in the strength and toughness, where the tensile strength and impact strength could be increased to ∼200% and ∼450%, respectively. On one hand, the rotation, recombination and restacking of the crystalline blocks formed an oriented and stratified morphology similar to the "brick-and-mortar" structure in nacre, and resulted in the confined crack propagations and the tortuous energy dissipating paths. On the other hand, the PIF-relaxation due to the newly generated rigid amorphous fraction further contributed to the improvement of the impact strength. The efficiency of enhancement could be controlled by the molding temperature, the compression ratio, and the volume fraction of chopped carbon fiber. As a result, PIF-processing might endow the PEEK material with improved mechanical matching with the surrounding tissues and extended service life in biomedical applications while retaining excellent biocompatibility with no external substances introduced.

Generation of a human induced pluripotent stem cell line (JSPHi002-A) from a patient with long-QT syndrome type 1 caused by KCNQ1 c.773A > T mutation.

We generated an iPSCs line from the peripheral blood mononuclear cells (PBMCs) collected from a patient with long QT syndrome type 1 (LQT1) via a non-integrating system. We identified and verified a missense mutation in the KCNQ1 gene (c.773A > T) by whole-exome sequencing and Sanger sequencing. The established iPSC line was tested for pluripotency, differentiation potential, and karyotype. This cell-based model can help study the molecular mechanism and develop personalized drug therapies for LQT1.

Atrial Lesions in a Pedigree With PRKAG2 Cardiomyopathy: Involvement of Disrupted AMP-Activated Protein Kinase Signaling.

PRKAG2 cardiomyopathy is a rare progressive disease characterized by increased ventricular wall thickness and preexcitation. Dysfunction of the protein 5'-AMP-activated protein kinase (AMPK) plays a decisive role in the progression of ventricular lesions. Although patients with the PRKAG2-R302Q mutation have a high incidence of atrial fibrillation (AF), the molecular mechanism contributing to the disease remains unclear. We carried out whole-genome sequencing with linkage analysis in three affected members of a family. Atrial samples were obtained from the proband via surgical intervention. Control atrium biopsies were obtained from patients with persistent AF. Pathological changes were analyzed using the hematoxylin and eosin (H&E), Masson, and periodic acid-Schiff (PAS) staining. The AMPK signaling pathway was investigated by western blot. A murine atrial cardiomyocyte cell line (HL-1) and human induced pluripotent stem derived atrial cardiomyocytes (hiPSC-ACMs) were transfected with an adenovirus carrying the same mutation. We used enzyme linked immunosorbent assay (ELISA) to determine the AMPK activity in HL-1 cells and hiPSC-ACMs overexpressing PRKAG2-R302Q. Pathological results showed a large quantity of glycogen accumulation and vacuolization in cardiomyocytes from the proband atrial tissue. Western blot analysis revealed that the AMPK activity was significantly downregulated compared with that of the controls. Furthermore, remarkable glycogen deposition and impairment of AMPK activity were reproduced in HL-1 cells overexpressing PRKAG2-R302Q. Taken together, PRKAG2-R302Q mutation directly impair atrial cardiomyocytes. PRKAG2-R302Q mutation lead to glycogen deposition and promote the growth of atrial lesions by disrupting the AMPK pathway.

Familial atrial myopathy in a large multigenerational heart-hand syndrome pedigree carrying an LMNA missense variant in rod 2B domain (p.R335W).

BACKGROUND: The literature on laminopathy with ventricular phenotype is extensive. However, the pathogenicity of LMNA variations in atrial lesions still lacks research. OBJECTIVE: The purpose of this study was to characterize the atrial phenotypes and possible mechanisms in a large Chinese family with heart-hand syndrome carrying a LMNA missense variant in rod 2B domain (c.1003C>T p.R335W). METHODS: Clinical characteristics were collected on the basis of the pedigree investigation. Comprehensive functional analyses, including molecular dynamic (MD) simulation, cellular, and animal functional assays, determined the pathogenicity in atrial myopathy. RESULTS: In the pedigree investigation, 6 of 13 of the mutation carriers showed heterogeneous cardiac phenotypes and 8 carriers also had brachydactyly. In silico molecular dynamics simulations predicted increased binding energy of the R335W mutant lamin A. Atrial cardiomyocytes (HL-1, human induced pluripotent stem cell-derived atrial cardiomyocytes) expressing R335W showed abnormal nuclear morphology, compromised DNA repair, and dysfunctional contraction. Adult zebrafish expressing mutant lamin A showed increased P wave duration in the electrocardiogram, decreased peak A wave velocity in echocardiography, and atrial lesions under the transmission electron microscope. CONCLUSION: LMNA p.R335W mutation leads to familial heart-hand syndrome characterized by an overlapping phenotype of prominent atrial lesions and brachydactyly. The unstable lamin dimerization and impaired DNA repair are possible mechanisms underlying cardiac phenotypes. Our findings consolidated the genetic role in the course of atrial arrhythmias and cardiac aging, which is helpful in the diagnosis and treatment of cardiac laminopathy.

Integrated single-cell analysis revealed immune dynamics during Ad5-nCoV immunization.

Coronavirus disease 2019 (COVID-19), driven by SARS-CoV-2, is a severe infectious disease that has become a global health threat. Vaccines are among the most effective public health tools for combating COVID-19. Immune status is critical for evaluating the safety and response to the vaccine, however, the evolution of the immune response during immunization remains poorly understood. Single-cell RNA sequencing (scRNA-seq) represents a powerful tool for dissecting multicellular behavior and discovering therapeutic antibodies. Herein, by performing scRNA/V(D)J-seq on peripheral blood mononuclear cells from four COVID-19 vaccine trial participants longitudinally during immunization, we revealed enhanced cellular immunity with concerted and cell type-specific IFN responses as well as boosted humoral immunity with SARS-CoV-2-specific antibodies. Based on the CDR3 sequence and germline enrichment, we were able to identify several potential binding antibodies. We synthesized, expressed and tested 21 clones from the identified lineages. Among them, one monoclonal antibody (P3V6-1) exhibited relatively high affinity with the extracellular domain of Spike protein, which might be a promising therapeutic reagent for COVID-19. Overall, our findings provide insights for assessing vaccine through the novel scRNA/V(D)J-seq approach, which might facilitate the development of more potent, durable and safe prophylactic vaccines.

Mechanisms of peripheral neurotoxicity associated with four chemotherapy drugs using human induced pluripotent stem cell-derived peripheral neurons.

The awareness of the long-term toxicities of cancer survivors after chemotherapy treatment has been gradually strengthened as the population of cancer survivors grows. Generally, chemotherapy-induced peripheral neurotoxicity (CIPN) is studied by animal models which are not only expensive and time-consuming, but also species-specific differences. The generation of human induced pluripotent stem cells (hiPSCs) and differentiation of peripheral neurons have provided an in vitro model to elucidate the risk of CIPN. Here, we developed a drug-induced peripheral neurotoxicity model using hiPSC-derived peripheral neurons (hiPSC-PNs) to study the mechanisms of different chemotherapeutic agents on neuronal viability using LDH assay, a cell apoptosis assay determined by caspase 3/7 activation, neurite outgrowth, ion channel expression and neurotransmitter release following treatment of cisplatin, bortezomib, ixabepilone, or pomalidomide. Our data showed that the multiple endpoints of the hiPSC-PNs model had different sensitivity to various chemotherapeutic agents. Furthermore, the chemotherapeutics separated cell viability from the decrease in neurite lengthand changed levels of ion channels and neurotransmitters to a certain extent. Thus, we study the mechanisms of peripheral neurotoxicity induced by chemotherapeutic agents through changes in these indicators.

Experimental Investigation on Microscopic Force Measurement of Foam and Heavy Oil.

This paper combined experiments with a theoretical model to simulate the behavior between a foam and heavy oil during contact pressing, separation, and adsorption. We discuss the changes in the elasticity and adsorption forces during the pressing and adsorption of the two fluids. The influence of the changes in temperature and pressure, the concentration of the sodium dodecyl sulfate surfactant, the heavy oil viscosity, and the addition of partially hydrolyzed polyacrylamide and hydrophobic SiO2 nanoparticles was studied. The results showed that the overall increase in the elasticity and adsorption forces between the foam at 1 wt % surfactant and heavy oil was more than 2 times greater than those of the foam with 0.2 wt % surfactant. The increase in viscosity of heavy oil also increased various forces. The overall improvement in the adsorption force between fluids caused by nanoparticles during separation and adsorption stages reached 1.8 times, which was better than that obtained using the polymer (1.65 times). However, the polymer showed a 1.4 times higher elastic force during the fluid pressing stage than the nanoparticles and about 4 times higher than the control foam, and the increase in temperature greatly weakened the effect of the force, while the change in pressure did not cause much impact. An analytical model was built based on fluid mechanics, and the calculation results were consistent with the experimental data with an error of about 5-12%, suggesting that this model provides a good reference value.

Investigation of the Effect of Nanoparticle-Stabilized Foam on EOR: Nitrogen Foam and Methane Foam.

In recent years, studies conducted on foam stabilization have focused on nanoparticles by generating strong adsorption at the interface to stabilize the foam under harsh reservoir conditions. Meanwhile, the selection of a gas source is also of great importance for foam performance. In this study, a mixed system of surfactants was selected, and the foamability and foam stability of nitrogen and methane were evaluated according to the improved jet method. After adding modified SiO2 nanoparticles, the foam-related parameters were analyzed. The plugging abilities of the different foams were compared through core-flooding experiments, and the oil displacement effects of the different foams were compared through microfluidic experiments. The results show that the amphoteric surfactant betaine has an excellent synergistic effect on the anionic surfactant SDS. The methane foam produced using the jet method has a larger initial volume than the nitrogen foam, but its stability is poor. The half-life of the nitrogen foam is about two times that of the methane foam. After adding 1.0 wt % SiO2 nanoparticles to the surfactant solution, the viscosity and stability of the formed foam improve. However, the maximum viscosity of the surfactant nanoparticle foam (surfactant-NP foam) is 53 mPa·s higher than that of the surfactant foam. In the core-flooding experiment, the plugging performance of the methane foam was worse than that of the nitrogen foam, and in the microfluidic experiment, the oil displacement abilities of the methane foam and the nitrogen foam were similar. The plugging performance and the oil displacement effect of the foam are greatly improved by adding nanoparticles. The surfactant-NP foam flooding has a better oil displacement effect and can enhance the recovery factor by more than 30%. Under actual high-pressure reservoir conditions, although the stability of the methane foam is weaker than that of the nitrogen foam, some methane may be dissolved in the crude oil to decrease the viscosity after the foam collapses, which leads to the methane foam being the preferred method in oilfields.

Coating Strategy for Surface Modification of Stainless Steel Wire to Improve Interfacial Adhesion of Medical Interventional Catheters.

Poor interfacial bonding between stainless steel wire and the inner and outer layer resin matrix significantly affects the mechanical performance of braid-reinforced composite hollow fiber tube, especially torsion control. In this work, a coating of thermoplastic polyurethane (TPU) deposited on the surface of stainless steel wire greatly enhanced the mechanical performance of braid-reinforced composite hollow fiber tube. This method takes advantage of the hydrogen bonding between polyether block amide (PEBA) and thermoplastic polyurethane (TPU) for surface modification of stainless steel wire, as well as the good compatibility between PEBA and TPU. The mechanical properties of composited tubes demonstrate that the interlaminar shear strength, modulus of elasticity, and torque transmission properties were enhanced by 27.8%, 42.1%, and 41.4%, respectively. The results indicating that the interfacial adhesion between the coated stainless steel wire and the inner and outer matrix was improved. In addition, the interfacial properties of composite hollow fiber tube before and after coating was characterized by the optical microscope, and results show that the interfacial adhesion properties of the modified stainless steel wire reinforced resin matrix composites were greatly improved.

Loss of ASXL1 in the bone marrow niche dysregulates hematopoietic stem and progenitor cell fates.

Somatic or de novo mutations of Additional sex combs-like 1 (ASXL1) frequently occur in patients with myeloid malignancies or Bohring-Opitz syndrome, respectively. We have reported that global loss of Asxl1 leads to the development of myeloid malignancies and impairs bone marrow stromal cell (BMSC) fates in mice. However, the impact of Asxl1 deletion in the BM niche on hematopoiesis remains unclear. Here, we showed that BMSCs derived from chronic myelomonocytic leukemia patients had reduced expression of ASXL1, which impaired the maintaining cord blood CD34+ cell colony-forming capacity with a myeloid differentiation bias. Furthermore, Asxl1 deletion in the mouse BMSCs altered hematopoietic stem and progenitor cell (HSC/HPC) pool and a preferential myeloid lineage increment. Immunoprecipitation and ChIP-seq analyses demonstrated a novel interaction of ASXL1 with the core subunits of RNA polymerase II (RNAPII) complex. Convergent analyses of RNA-seq and ChIP-seq data revealed that loss of Asxl1 deregulated RNAPII transcriptional function and altered the expression of genes critical for HSC/HPC maintenance, such as Vcam1. Altogether, our study provides a mechanistic insight into the function of ASXL1 in the niche to maintain normal hematopoiesis; and ASXL1 alteration in, at least, a subset of the niche cells induces myeloid differentiation bias, thus, contributes the progression of myeloid malignancies.

Layer-by-Layer Self-Assembly Strategy for Surface Modification of Aramid Fibers to Enhance Interfacial Adhesion to Epoxy Resin.

In this work, the layer-by-layer self-assembly technology was used to modify aramid fibers (AFs) to improve the interfacial adhesion to epoxy matrix. By virtue of the facile layer-by-layer self-assembly technique, poly(l-3,4-Dihydroxyphenylalanine) (l-PDOPA) was successfully coated on the surface of AFs, leading to the formation of AFs with controllable layers (nL-AF). Then, a hydroxyl functionalized silane coupling agent (KH550) was grafted on the surface of l-PDOPA coated AFs. The properties such as microstructure and surface morphology of AFs before and after modification were characterized by FTIR, XPS and FE-SEM. The results confirmed that l-PDOPA and KH550 were successfully introduced into the surface of AFs by electrostatic adsorption. The interfacial properties of AFs reinforced epoxy resin composites before and after coating were characterized by interfacial shear strength (IFSS), interlaminar shear strength (ILSS) and FE-SEM, and the results show that the interfacial adhesion properties of the modified fiber/epoxy resin composites were greatly improved.

Resveratrol protects Leydig cells from nicotine-induced oxidative damage through enhanced autophagy.

Some studies have revealed that nicotine can damage the male reproductive system through various means including oxidative stress, which is a primary factor in the pathogenesis of male infertility. The strong anti-oxidative capacity of resveratrol has been demonstrated previously, but its role in the context of male reproduction remains inconclusive. To explore the biological role of resveratrol in protecting male reproductive function and the potential underlying mechanism, nicotine-induced Leydig cells were used as a cell model of oxidative damage. The data showed that resveratrol treatment increased cell viability, SOD activity and anti-apoptotic activity in nicotine-stressed Leydig cells. This effect was accompanied by the upregulation of autophagy, which was illustrated by MDC-LysoTracker red staining. Moreover, pretreating with 3-methyladenine (3-MA), an autophagy inhibitor, attenuated resveratrol-induced Leydig cells autophagy and promoted apoptosis. Apart from this, resveratrol enhanced AMPK phosphorylation but reduced mTOR phosphorylation. Subsequently, upon inhibiting AMPK phosphorylation by AMPK inhibitors, Leydig cell autophagy induced by resveratrol was obviously abolished. In conclusion, resveratrol may exert its cytoprotective role against oxidative injury by the activation of autophagy via AMPK/mTOR pathway.

Gain of function of ASXL1 truncating protein in the pathogenesis of myeloid malignancies.

Additional Sex Combs-Like 1 (ASXL1) is mutated at a high frequency in all forms of myeloid malignancies associated with poor prognosis. We generated a Vav1 promoter-driven Flag-Asxl1Y588X transgenic mouse model, Asxl1Y588X Tg, to express a truncated FLAG-ASXL1aa1-587 protein in the hematopoietic system. The Asxl1Y588X Tg mice had an enlarged hematopoietic stem cell (HSC) pool, shortened survival, and predisposition to a spectrum of myeloid malignancies, thereby recapitulating the characteristics of myeloid malignancy patients with ASXL1 mutations. ATAC- and RNA-sequencing analyses revealed that the ASXL1aa1-587 truncating protein expression results in more open chromatin in cKit+ cells compared with wild-type cells, accompanied by dysregulated expression of genes critical for HSC self-renewal and differentiation. Liquid chromatography-tandem mass spectrometry and coimmunoprecipitation experiments showed that ASXL1aa1-587 acquired an interaction with BRD4. An epigenetic drug screening demonstrated a hypersensitivity of Asxl1Y588X Tg bone marrow cells to BET bromodomain inhibitors. This study demonstrates that ASXL1aa1-587 plays a gain-of-function role in promoting myeloid malignancies. Our model provides a powerful platform to test therapeutic approaches of targeting the ASXL1 truncation mutations in myeloid malignancies.