A composite of AgNPs and lignin porous microspheres via in-situ reduction of Ag+ and its catalytic performance.

Despite the widespread utilization of nano silver composites in the domain of catalytic hydrogenation of aromatic pollutants in wastewater, certain challenges persist, including the excessive consumption of chemical reagents during the preparation process and the difficulty in recycling. In this study, silver ions were reduced in-situ by taking advantage of the adsorptive and reducing capacities of hydroxyls and amino groups on lignin porous microspheres (LPMs) under mild ultrasonic conditions, and lignin porous microspheres loaded with silver nanoparticles (Ag@LPMs) were conveniently prepared. Ag@LPMs had excellent catalytic and cycling performances for p-nitrophenol (4-NP), methylene blue (MB) and methyl orange (MO). The 4-NP could be completely reduced to 4-AP within 155 s under the catalysis of Ag@LPMs, with a pseudo-first-order kinetic constant of 1.28 min-1. Furthermore, Ag@LPMs could still complete the catalytic reduction of 4-NP within 10 min after five cycles. Ag@LPMs with the particle size ranging from 100 to 200 µm conferred ease of recycling, and the porous structure effectively resolved the issue of sluggish mass transfer encountered during the catalytic process. At the same time, the binding force of nano silver and LPMs obtained by ultrasonic was stronger than that of heating, so the materials prepared by ultrasonic had better cycling performance. Silver ions concentration and pH value in the preparation process affected the catalytic performance of Ag@LPMs, 50 mmol/L Ag+ and pH value of 7 turned out to be the optimization conditions.

2 W, 1.5†µm single-mode fiber methane Raman laser pumped by a Yb-doped fiber amplifier.

We report here, to the best of our knowledge, the first 1.5 µm methane-filled fiber Raman laser pumped by a fiber laser. Based on the narrow-linewidth pulsed Yb-doped fiber laser pump source and a 15 m hollow-core fiber filled with 2.5 bar methane, the maximum power of 2.06 W Stokes wave at 1543 nm is obtained. The output laser has a narrow linewidth of 2.3 GHz, and the pulse repetition frequency can be adjusted flexibly. The output shows excellent near-diffraction-limited beam quality with a M2 factor of ∼1.09. This work proves the advantage of the fiber laser pump source with modest peak power and flexible temporal characteristics in 1.5 µm fiber gas Raman laser emission, providing good guidance for generating pulsed fiber source with narrow linewidth and high beam quality.

Ultrasonic-assisted synthesis of lignin-based ultrasmall silver nanoparticles for photothermal-mediated sterilization.

Lignin-based silver nanoparticles have been considered a promising antimicrobial material. However, it remains challenging to prepare ultra-small size silver nanoparticles sustainably with superior antibacterial performance. In this work, we modified ethanol-extracted lignin (EL) with carboxymethyl groups and further synthesized ultra-small particle size (3.8 ± 0.1 nm) nanosilver incorporated carboxymethyl lignin complexes (AgNPs@CEL) using ultrasonic technology. Due to the outstanding antibacterial properties of the ultra-small size nanosilver, AgNPs@CEL could cause 5.3 and 5.4 log10 CFU/mL reduction against E. coli and S. aureus in 5 min. Meanwhile, AgNPs@CEL exhibited remarkable photothermal antibacterial performance, which caused 6.2 and 6.1 log10 CFU/mL reduction of E. coli and S. aureus, with NIR irradiation for 5 min. Furthermore, the composite films prepared by doping only 0.5 wt% AgNPs@CEL into ethyl cellose could achieve a bactericidal rate more than 99.99 %. This study provides a new insight into design of controlled particle size lignin-based antibacterial nanosilver materials in a sustainable manner and holds promise for applications in antibacterial fields.

Aqueous amine enables sustainable monosaccharide, monophenol, and pyridine base coproduction in lignocellulosic biorefineries.

Thought-out utilization of entire lignocellulose is of great importance to achieving sustainable and cost-effective biorefineries. However, there is a trade-off between efficient carbohydrate utilization and lignin-to-chemical conversion yield. Here, we fractionate corn stover into a carbohydrate fraction with high enzymatic digestibility and reactive lignin with satisfactory catalytic depolymerization activity using a mild high-solid process with aqueous diethylamine (DEA). During the fractionation, in situ amination of lignin achieves extensive delignification, effective lignin stabilization, and dramatically reduced nonproductive adsorption of cellulase on the substrate. Furthermore, by designing a tandem fractionation-hydrogenolysis strategy, the dissolved lignin is depolymerized and aminated simultaneously to co-produce monophenolics and pyridine bases. The process represents the viable scheme of transforming real lignin into pyridine bases in high yield, resulting from the reactions between cleaved lignin side chains and amines. This work opens a promising approach to the efficient valorization of lignocellulose.

Inositol hexaphosphate enhances chemotherapy by reversing senescence induced by persistently activated PERK and diphthamide modification of eEF2.

Oxaliplatin is an important initial chemotherapy benefiting advanced-stage colorectal cancer patients. Frustratingly, acquired oxaliplatin resistance always occurs after sequential chemotherapy with diverse antineoplastic drugs. Therefore, an exploration of the mechanism of oxaliplatin resistance formation in-depth is urgently needed. We generated oxaliplatin-resistant colorectal cancer models by four representative compounds, and RNA-seq revealed that oxaliplatin resistance was mainly the result of cells' response to stimulus. Moreover, we proved persistent stimulus-induced endoplasmic reticulum stress (ERs) and associated cellular senescence were the core causes of oxaliplatin resistance. In addition, we screened diverse phytochemicals for ER inhibitors in silico, identifying inositol hexaphosphate (IP6), whose strong binding was confirmed by surface plasmon resonance. Finally, we confirmed the ability of IP6 to reverse colorectal cancer chemoresistance and investigated the mechanism of IP6 in the inhibition of diphthamide modification of eukaryotic elongation factor 2 (eEF2) and PERK activation. Our study demonstrated that oxaliplatin resistance contributed to cell senescence induced by persistently activated PERK and diphthamide modification of eEF2 levels, which were specifically reversed by combination therapy with IP6.

In Situ Encapsulation of Cytochrome c within Covalent Organic Frames Using Deep Eutectic Solvents under Ambient Conditions.

In situ integration of enzymes with covalent organic frameworks (COFs) to form hybrid biocatalysts is both significant and challenging. In this study, we present an innovative strategy employing deep eutectic solvents (DESs) to synergistically synthesize COFs and shield cytochrome c (Cyt c). By utilizing DESs as reaction solvents in combination with water, we successfully achieved rapid and in situ encapsulation of Cyt c within COFs (specifically COF-TAPT-TFB) under ambient conditions. The resulting Cyt c@COF-TAPT-TFB composite demonstrates a remarkable preservation of enzymatic activity. This encapsulation strategy also imparts exceptional resistance to organic solvents and exhibits impressive recycling stability. Additionally, the enhanced catalytic efficiency of Cyt c@COF-TAPT-TFB in a photoenzymatic cascade reaction is also showcased.

Effectiveness, safety and patients' perceptions of an immersive virtual reality-based exercise system for poststroke upper limb motor rehabilitation: A proof-of-concept and feasibility randomized controlled trial.

Objective: This study aimed to examine the effectiveness, safety and patients' perceptions of an immersive virtual reality (VR)-based exercise system for poststroke upper limb rehabilitation. Methods: A proof-of-concept, 2-week randomized controlled trial was conducted. Fifty stroke patients were randomly assigned to either use the immersive VR-based exercise system to perform upper limb exercises for 2 weeks (intervention) or play commercial games (control). Effectiveness, safety and patients' perceptions of the exercise system were assessed at baseline and at 1- and 2-week follow-ups. Results: Intention-to-treat analysis revealed that after 2 weeks, statistically significant improvements in shoulder flexion active range of motion (AROM), shoulder abduction AROM, perceived upper limb motor function and quality of life (QoL) were observed in one or both groups, but not between the groups. Per-protocol analysis showed that after 2 weeks: (i) statistically significant improvement in shoulder abduction AROM was obtained in the intervention group, and the difference in the mean changes between the groups was statistically significant; (ii) statistically significant improvements in coordination/speed (Fugl-Meyer Assessment for Upper Extremity), shoulder flexion AROM, perceived upper limb motor function and QoL were obtained in one or both groups, but not between the groups. Conclusions: The immersive VR-based exercise system is a potentially effective, safe and acceptable approach for supporting poststroke motor rehabilitation. These findings can serve as a basis for larger-scale studies on the application of VR for poststroke exercises.

[Microbial remediation of cadmium-contaminated soils and its mechanisms: a review].

Excessive levels of cadmium (Cd) in soil exert serious negative impacts on soil ecosystems. Microorganisms are a common component of soil and show great potential for mitigating soil Cd. This review summarizes the application and remediation mechanisms of microorganisms, microbial-plants, and microbial-biochar in Cd-contaminated soil. Microorganisms such as Bacillus, Acinetobacter, Pseudomonas, and arbuscular mycorrhizal fungi (AMF) can change the biological validity of Cd through adsorption, mineralization, precipitation and dissolution. Different factors such as pH, temperature, biomass, concentration, and duration have significant effects on Cd bioavailability by microorganisms. Pseudomonas, Burkholderia, and Flavobacterium can promote the uptake of Cd2+ by hyperaccumulator through promotion and activation. Biochar, a soil amendment, possesses unique physicochemical properties and could act as a shelter for microorganisms in agriculture. The use of combined microbial-biochar can further stabilize Cd compared to using biochar alone.

Effect of Different Modification Methods on the Adsorption of Manganese by Biochar from Rice Straw, Coconut Shell, and Bamboo.

The adsorption capacity of pristine biochar without modification is usually low. In this experiment, we comprehensively evaluated the adsorption of Mn(II) by biochar with different modification methods from different biomass. The biochar from rice straw, coconut shell, and bamboo was produced by pyrolysis at 600 °C under nitrogen and then modified with HNO3, NaOH, and Na2S, respectively. The results showed that the adsorption capacities of these modified biochar samples were in the order Biochar-NaOH > Biochar-Na2S > Biochar-HNO3. Among the three modification methods, biochar modified with NaOH is the optimum for the adsorption of Mn(II). However, the same method of modification has different effects on different biomass feedstocks. Rice straw: R-C > R-NaOH-C > R-Na2S-C > R-HNO3-C; coconut shell: C-NaOH-C > C-Na2S-C > C-HNO3-C > C-C; bamboo: B-NaOH-C > B-Na2S-C > B-C > B-HNO3-C. At the pH of 5 and 30 °C, R-C, C-NaOH-C, and B-NaOH-C showed the highest maximum adsorption capacity for Mn(II). Equilibrium data were evaluated by Langmuir, Freundlich, and Temkin isotherm models, and the results suggested that the Langmuir model is the most suitable to expound the adsorption behavior of Mn(II) on R-C, C-NaOH-C, and B-NaOH-C. Overall, the results from this work suggest that the key for preparing biochar adsorbents with high capacity is to choose the appropriate biomass feedstock and modification method.

High power mid-infrared fiber amplifier at 3.1†µm by acetylene-filled hollow-core fibers.

We characterized high-power continuous-wave (CW) and pulsed mid-infrared (mid-IR) fiber amplifiers at a wavelength of 3.1 µm in acetylene-filled hollow-core fibers (HCFs) with a homemade seed laser. A maximum CW power of 7.9 W was achieved in a 4.2-m HCF filled with 4-mbar acetylene, which was 11% higher than the power without the seed. The maximum average power of the pulsed laser was 8.6 W (pulse energy of 0.86 µJ) at 7-mbar acetylene pressure, a 16% increase over the power without the seed. To the best of our knowledge, backward characteristics are reported for the first time for fiber gas lasers, and the backward power accounted for less than 5% of the forward power. The optimum acetylene pressure and HCF length for the highest mid-IR output are discussed based on theoretical simulations. This study provides significant guidance for high-power mid-infrared (mid-IR) output in gas-filled HCFs.

Predictive Factors of Nonmalignant Pathological Diagnosis and Final Diagnosis of Ultrasound-Guided Cutting Biopsy for Peripheral Pulmonary Diseases.

This study aimed to explore the predictive factors of nonmalignant pathological diagnosis and final diagnosis of ultrasound-guided cutting biopsy for peripheral pulmonary diseases. A total of 470 patients with peripheral lung disease diagnosed as nonmalignant by ultrasound-guided cutting biopsy in the First Affiliated Hospital of Guangxi Medical University from January 2017 to May 2020 were included. Ultrasound biopsy was performed to determine the correctness of pathological diagnosis. Independent risk factors of malignant tumor were predicted by multivariate logistic regression analysis. Pathological biopsy results showed that 162 (34.47%) of the 470 biopsy data were specifically benign, and 308 (65.53%; malignant lesions: 25.3%, benign lesions: 74.7%) were nondiagnostic findings. The final diagnoses were benign in 387 cases and malignant in 83 cases. In the nondiagnostic biopsy malignant risk prediction analysis, lesion size (OR = 1.025, P = 0.005), partial solid lesions (OR = 2.321, P = 0.035), insufficiency (OR = 6.837, P < 0.001), and presence of typical cells (OR = 34.421, P = 0.001) are the final important independent risk factors for malignant tumors. In addition, 30.1% (25/83) of patients with nonmalignant lesions who were finally diagnosed with malignant tumors underwent repeated biopsy, and 92.0% (23/25) were diagnosed during the second repeated biopsy. 59.0% (49/83) received additional invasive examination. Nondiagnostic biopsy predictors of malignant risk include lesion size, partial solid lesions, insufficiency, and presence of atypical cells. When a nonmalignant result is obtained for the first time, the size of the lesion, whether the lesion is subsolid, and the type of pathology obtained should be reviewed.

Sex Difference in the Association Between Sedentary Behavior and Sleep Quality: A Longitudinal Study Among Older Adults in Rural China.

OBJECTIVES: Sleep quality plays a vital role in maintaining health in older adults. Sedentary behavior may be a risk factor for poor sleep quality in older adults. This study aimed to explore the relationship between sedentary behavior and sleep quality among older adults in rural China and determine whether there is a sex difference in this association. DESIGN: A longitudinal design. The data used in this study were obtained from the Shandong Rural Elderly Health Cohort (wave 1: 2019, wave 2: 2020). SETTING AND PARTICIPANTS: Data were from 2731 individuals aged ≥60 years from rural areas in China. METHODS: Sleep quality was assessed using the Pittsburgh Sleep Quality Index. Sedentary behavior and control variables were measured using self-reported questions. Multivariable logistic regression and generalized estimating equations were used to assess the associations. RESULTS: After full adjustment, the association between sedentary behavior and poor sleep quality was statistically significant [odds ratio (OR) 1.49, 95% CI 1.20-1.85]. Specifically, a longer sedentary time was associated with worse subjective sleep quality, less sleep latency, and lower habitual sleep efficiency (OR 1.39-1.58). A significant association was observed in women but not men. CONCLUSIONS AND IMPLICATIONS: Older adults who spend more time engaging in sedentary activities have poorer sleep quality and more sleep problems. Prolonged sedentary time is more detrimentally associated with poor sleep quality in women than men. There is a need for tailored exercise prescriptions and guidelines to stimulate older adults of different sexes to change their sedentary behavior, which may improve sleep quality in older adults.

Construction of Macroporous ß-Glucosidase@MOFs by a Metal Competitive Coordination and Oxidation Strategy for Efficient Cellulose Conversion at 120 °C.

Metal-organic frameworks (MOFs) have become promising accommodation for enzyme immobilization in recent years. However, the microporous nature of MOFs affects the accessibility of large molecules, resulting in a significant decline in biocatalysis efficiency. Herein, a novel strategy is reported to construct macroporous MOFs by metal competitive coordination and oxidation with induced defect structure using a transition metal (Fe2+) as a functional site. The feasibility of in situ encapsulating ß-glucosidase (ß-G) within the developed macroporous MOFs endows an enzyme complex (ß-G@MOF-Fe) with remarkably enhanced synergistic catalysis ability. The 24 h hydrolysis rate of ß-G@MOF-Fe (with respect to cellobiose) is as high as approximately 99.8%, almost 32.2 times that of free ß-G (3.1%). Especially, the macromolecular cellulose conversion rate of ß-G@MOF-Fe reached 90% at 64 h, while that of ß-G@MOFs (most micropores) was only 50%. This improvement resulting from the expansion of pores (significantly increased at 50-100 nm) can provide enough space for the hosted biomacromolecules and accelerate the diffusion rate of reactants. Furthermore, unexpectedly, the constructed ß-G@MOF-Fe showed a superior heat resistance of up to 120 °C, attributing to the new strong coordination bond (Fe2+-N) formation through the metal competitive coordination. Therefore, this study offers new insights to solve the problem of the high-temperature macromolecular substrate encountered in the actual reaction.

Remediation of cadmium-contaminated soil by micro-nano nitrogen-doped biochar and its mechanisms.

Cadmium-contaminated soils are an urgent problem that needs to be solved in many countries and regions. In this study, a new heavy metal passivator, micro-nano nitrogen-doped biochar (Nm-NBC), was prepared by introducing nitrogen into biochar. Soybean was used as an experimental plant to compare the effects of corn straw biochar (CBC, not modified), ammonium chloride modified corn straw biochar (NBC), and micro-nano nitrogen-doped biochar (Nm-NBC) on the remediation of Cdcontaminated soil. The results showed that the biomass of soybean, pH, organic matter, and total nitrogen content of the Cd-contaminated soil significantly increased, and the available Cd in soil significantly reduced (P < 0.05) when CBC, NBC, and Nm-NBC were added. The effect was as follows: Nm-NBC > NBC > CBC; Nm-NBC had the best result. When 1% Nm-NBC added to the soil, the Cd content in beans reduced by 68.09%. BET, FTIR, XPS, and SEM were used to analyze the characteristics of Nm-NBC and its mechanisms in the remediation of Cd-contaminated soils. The results showed that Nm-NBC had larger specific surface area and abundant functional groups; -COOH and graphitic nitrogen in Nm-NBC can form Cd-O bond and Cd-π with Cd(II) in the soil. Therefore, Nm-NBC prepared by introducing nitrogen into biochar has a promising application in the remediation of Cd-contaminated soil.

Contribution of the Ultrasound Techniques in the Evaluation of Knee Joint Damage in the Case of Pigmented Villonodular Synovitis and Rheumatoid Arthritis.

OBJECTIVES: This is a prospective study to evaluate the clinical value of high-frequency ultrasound (HFUS), superb microvascular imaging (SMI), and contrast-enhanced ultrasound (CEUS) in differentiation of pigmented villonodular synovitis (PVNS) and highly active rheumatoid arthritis (RA). METHODS: Twenty PVNS patients and 24 active RA patients were selected to undergo HFUS, SMI, and CEUS examinations. The characteristics of HFUS, SMI, and CEUS in PVNS and RA were compared, and the differential diagnosis performances of HFUS, SMI, and CEUS in PVNS and RA were evaluated by receiver operating characteristic (ROC) analysis. RESULTS: There were statistically significant in joint effusion, synovial thickness, synovial morphology, synovial echo, synovial vessel shape, synovial enhanced direction, and enhanced pattern between PVNS and RA (P < .05). However, no statistically significant were found in bone erosion, synovial boundary, blood signal grading of synovium, synovial enhanced strength, and CEUS quantitative parameters (including PI, TTP, S, MTT, and AUC) (P > .05). The AUC of HFUS, SMI, and CEUS for differential diagnosis PVNS and RA were 0.832, 0.675, and 0.817, respectively. The AUC of HFUS + SMI, HFUS + CEUS, SMI + CEUS, HFUS + SMI + CEUS were 0.923, 0.940, 0.817, and 0.940, respectively. The AUC of HFUS + SMI and HFUS + CEUS was higher than that of each alone (P < .05). CONCLUSIONS: HFUS, SMI, and CEUS can be used as supplementary methods for diagnosis and differential diagnosis in PVNS and active RA. What is more, the combination of HFUS + SMI and HFUS + CEUS was suggested.

Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater.

Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g-1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.

UV-Assisted Room-Temperature Fabrication of Lignin-Based Nanosilver Complexes for Photothermal-Mediated Sterilization.

Green and controllable preparation of silver nanoparticles (AgNPs) remains a great challenge. In this work, ethanol-extracted lignin-based nanosilver composites (AgNPs@EL) were synthesized at room temperature with the assistance of ultraviolet (UV) radiation. The ethanol-extracted lignin (EL) could serve as natural dispersion carriers and reducing agents for AgNPs. The reducing ability of EL could be further improved under UV irradiation, which enables the rapid synthesis of AgNPs at room temperature. More importantly, due to the good photothermal conversion capacity of EL, AgNPs@EL exhibits remarkably enhanced photothermal performance and excellent photothermal antibacterial ability, which could cause 7.2 and 5.3 log10 CFU/mL reduction against Escherichia coli and Staphylococcus aureus, respectively, under near-infrared (NIR) irradiation (808 nm, 1.8 W/cm2) for 5 min. Furthermore, the composite film obtained by impregnating bacterial cellulose onto AgNPs@EL solution also shows significantly improved mechanical properties and photothermal antimicrobial activity. Therefore, this work may provide insights into the design of lignin-based photothermal-mediated antimicrobial materials.

Study on the Interaction between Four Typical Carotenoids and Human Gut Microflora Using an in Vitro Fermentation Model.

Recent studies indicated a strong relationship between carotenoids and gut microflora. However, their structure-activity relationship remains unclear. This study evaluated the interaction between four typical carotenoids (ß-carotene, lutein, lycopene, and astaxanthin) and gut microflora using an in vitro fermentation model. After 24 h of fermentation, the retention rates of the four carotenoids were 1.40, 1.38, 1.46, and 5.63 times lower than those of their without gut microflora control groups, respectively. All four carotenoid treated groups significantly increased total short-chain fatty acids (SCFAs) production. All carotenoid supplements significantly promoted the abundance of Roseburia and Parasutterella and inhibited the abundance of Collinsella, while ß-carotene, lutein, lycopene, and astaxanthin significantly promoted the abundance of Ruminococcus, Sutterella, Subdoligranulum, and Megamonas, respectively. Furthermore, xanthophylls have a more significant impact on gut microflora than carotenes. This study provides a new way to understand how carotenoids work in the human body with the existing gut microflora.

Fabrication of a Highly Efficient Wood-Based Solar Interfacial Evaporator with Self-Desalting and Sterilization Performance.

Solar interfacial evaporation based on wood-derived materials has been considered a promising strategy for desalination and wastewater purification. Herein, we adopted delignified wood (DW) as the water transport substrate and lignosulfonate (LS)-modified narrow-band gap semiconductor nickel disulfide (NiS2) as the light-absorbing agent (LS-NiS2) to fabricate a high-efficiency evaporator (LS-NiS2@DW). On the one hand, the high absorbance (>95%) within a broad wavelength range and excellent photothermal conversion efficiency of LS-NiS2 endow efficient solar energy utilization. On the other hand, the hydrophilicity of DW facilitates water activation, which results in a lower evaporation enthalpy of LS-NiS2@DW (1274.4 kJ kg-1) than that of pure water. By combining LS-NiS2 and DW, LS-NiS2@DW achieved an evaporation rate as high as 2.80 kg m-2 h-1 under one sun irradiation (1 kW m-2), and the evaporation efficiency reached 87.4%. Notably, LS-NiS2@DW exhibits a high evaporation rate (2.42-2.69 kg m-2 h-1) in simulated seawater for 24 h with no salt crystals formed on the surface. Moreover, LS-NiS2@DW shows high antibacterial activity with about 90% reduction in bacterial survival rate. This work could provide new perspectives for the design of a high-efficiency wood-based photothermal evaporator.