Disrupted white matter structural networks in patients with acute ischemic stroke in the right basal ganglia.

Widespread structural changes have been observed in patients with stroke in previous diffusion tensor imaging studies. However, the topological organization of white matter structural networks after acute ischemic stroke (AIS) in the right basal ganglia (BG) remains unknown. The aim of our study is to investigate whether the topological structure of the white matter structural network is altered in patients with AIS in the right BG, and its relationship with cognition. Graph theoretical analysis was employed to investigate the topological architecture of whole-brain white matter structural networks in 40 AIS patients in the right BG and 40 healthy controls (HC), and network-based statistics (NBS) were applied to examine structural connectivity alterations. Compared to HC, AIS patients exhibited altered global network properties characterized by increased small-worldness, normalized clustering coefficient, and shortest path length, as well as decreased clustering coefficient, local efficiency, and global efficiency. The nodes with significantly decreased nodal properties in AIS patients were primarily located in the default mode network, limbic system, sensorimotor system, salience network, and central executive network. Reduced structural connectivity detected by NBS in AIS patients were primarily located in the lesional hemisphere. Furthermore, altered nodal properties were correlated with cognitive scores. Documenting the alterations in the topological patterns of white matter structural networks will help to promote the understanding of the neural mechanisms of cognitive impairment after AIS in the right BG.

Constructing the Snail Shell-Like Framework in Thermal Interface Materials for Enhanced Through-Plane Thermal Conductivity.

Melioration of the through-plane thermal conductivity (TC) of thermal interface materials (TIMs) is a sore need for efficient heat dissipation to handle an overheating concern of high-power-density electronics. Herein, we constructed a snail shell-like thermal conductive framework to facilitate vertical heat conduction in TIMs. With inspiration from spirally growing calcium carbonate platelets of snail shells, a facile double-microrod-assisted curliness method was developed to spirally coil boron nitride nanosheet (BNNS)/aramid nanofiber (ANF) laminates where interconnected BNNSs lie along the horizontal plane. Thus, vertical alignment of BNNSs in the resultant TIM was achieved, exhibiting a through-plane TC enhancement of ∼100% compared to the counterpart with randomly distributed BNNSs at the same BNNS addition (50 wt %). The Foygel's nonlinear model revealed that this unique snail shell-like BNNS framework reduced interfacial thermal resistance by 4 orders of magnitude. Our TIM showed superior interfacial thermal dissipation efficiency, leading to a temperature reduction of 42.6 °C for the LED chip compared to the aforementioned counterpart. Our work paves a valuable way for fabricating high-performance TIMs to ensure reliable operation of electrical devices.

Biodegradable magnesium and zinc composite microspheres with synergistic osteogenic effect for enhanced bone regeneration.

Biodegradable polymer microspheres in bone tissue engineering have become appealing as their non-invasive advantages in irregular damage bone repair. However, current microspheres used in BTE still lack sufficient osteogenic capacity to induce effective bone regeneration. In this study, we developed osteogenic composite microspheres concurrently loaded with magnesium oxide (MgO) and zinc oxide (ZnO), both of which are osteogenic active substances, using a facile and scalable emulsification method. The osteogenic composite microspheres exhibited a sequential yet complementary release profile characterized by a rapid release of Mg2+ and a gradual release of Zn2+ in a physiological environment, thereby maintaining the concentration of bioactive ions at a sustained high level. As a result, the combination of Mg2+ and Zn2+ in the composite microspheres led to a synergistic enhancement in biomimetic mineralization and the upregulation in the expression of osteogenic-related genes and proteins at the cellular level. Through a critical-sized calvarial rate defect model, the osteogenic composite microspheres were demonstrated to have strong osteogenic ability to promote new bone formation via ultrasonic imaging, histological and immunohistochemical evaluations. In sum, these osteogenic composite microspheres as microcarriers of Mg2+ and Zn2+ have great potential in the delivery of therapeutic ions for treating bone defects.

Bioinspired Nanolayered Structure Tuned by Extensional Stress: A Scalable Way to High-Performance Biodegradable Polyesters.

The nacre-inspired multi-nanolayer structure offers a unique combination of advanced mechanical properties, such as strength and crack tolerance, making them highly versatile for various applications. Nevertheless, a significant challenge lies in the current fabrication methods, which is difficult to create a scalable manufacturing process with precise control of hierarchical structure. In this work, a novel strategy is presented to regulate nacre-like multi-nanolayer films with the balance mechanical properties of stiffness and toughness. By utilizing a co-continuous phase structure and an extensional stress field, the hierarchical nanolayers is successfully constructed with tunable sizes using a scalable processing technique. This strategic modification allows the robust phase to function as nacre-like platelets, while the soft phase acts as a ductile connection layer, resulting in exceptional comprehensive properties. The nanolayer-structured films demonstrate excellent isotropic properties, including a tensile strength of 113.5 MPa in the machine direction and 106.3 MPa in a transverse direction. More interestingly, these films unprecedentedly exhibit a remarkable puncture resistance at the same time, up to 324.8 N mm-1, surpassing the performance of other biodegradable films. The scalable fabrication strategy holds significant promise in designing advanced bioinspired materials for diverse applications.

A Biomimetic Fibrous Composite Scaffold with Nanotopography-Regulated Mineralization for Bone Defect Repair.

The effective regeneration of large bone defects via bone tissue engineering is challenging due to the difficulty in creating an osteogenic microenvironment. Inspired by the fibrillar architecture of the natural extracellular matrix, we developed a nanoscale bioengineering strategy to produce bone fibril-like composite scaffolds with enhanced osteogenic capability. To activate the surface for biofunctionalization, self-adaptive ridge-like nanolamellae were constructed on poly(ε-caprolactone) (PCL) electrospinning scaffolds via surface-directed epitaxial crystallization. This unique nanotopography with a markedly increased specific surface area offered abundant nucleation sites for Ca2+ recruitment, leading to a 5-fold greater deposition weight of hydroxyapatite than that of the pristine PCL scaffold under stimulated physiological conditions. Bone marrow mesenchymal stem cells (BMSCs) cultured on bone fibril-like scaffolds exhibited enhanced adhesion, proliferation, and osteogenic differentiation in vitro. In a rat calvarial defect model, the bone fibril-like scaffold significantly accelerated bone regeneration, as evidenced by micro-CT, histological histological and immunofluorescence staining. This work provides the way for recapitulating the osteogenic microenvironment in tissue-engineered scaffolds for bone repair.

Structuring restricted amorphous molecular chains in the reinforced cellulose film by uniaxial stretching.

The construction of the preferred orientation structure by stretching is an efficient strategy to fabricate high-performance cellulose film and it is still an open issue whether crystalline structure or amorphous molecular chain is the key factor in determining the enhanced mechanical performance. Herein, uniaxial stretching with constant width followed by drying in a stretching state was carried out to cellulose hydrogels with physical and chemical double cross-linking networks, achieving high-performance regenerated cellulose films (RCFs) with an impressive tensile strength of 154.5 MPa and an elastic modulus of 5.4 GPa. The hierarchical structure of RCFs during uniaxial stretching and drying was systematically characterized from micro- to nanoscale, including microscopic morphology, crystalline structure as well as relaxation behavior at a molecular level. The two-dimensional correlation spectra of dynamic mechanical analysis and Havriliak-Negami fitting results verified that the enhanced mechanical properties of RCFs were mainly attributed to the stretch-induced tight packing and restricted relaxation of amorphous molecular chains. The new insight concerning the contribution of molecular chains in the amorphous region to the enhancement of mechanical performance for RCFs is expected to provide valuable guidance for designing and fabricating high-performance eco-friendly cellulose-based films.

2D Free-Standing GeS1-xSex with Composition-Tunable Bandgap for Tailored Polarimetric Optoelectronics.

Germanium-based monochalcogenides (i.e., GeS and GeSe) with desirable properties are promising candidates for the development of next-generation optoelectronic devices. However, they are still stuck with challenges, such as relatively fixed electronic band structure, unconfigurable optoelectronic characteristics, and difficulty in achieving free-standing growth. Herein, it is demonstrated that two-dimensional (2D) free-standing GeS1-xSex (0 ≤ x ≤ 1) nanoplates can be grown by low-pressure rapid physical vapor deposition (LPRPVD), fulfilling a continuously composition-tunable optical bandgap and electronic band structure. By leveraging the synergistic effect of composition-dependent modulation and free-standing growth, GeS1-xSex-based optoelectronic devices exhibit significantly configurable hole mobility from 6.22 × 10-4 to 1.24 cm2V-1s⁻1 and tunable responsivity from 8.6 to 311 A W-1 (635 nm), as x varies from 0 to 1. Furthermore, the polarimetric sensitivity can be tailored from 4.3 (GeS0.29Se0.71) to 1.8 (GeSe) benefiting from alloy engineering. Finally, the tailored imaging capability is also demonstrated to show the application potential of GeS1-xSex alloy nanoplates. This work broadens the functionality of conventional binary materials and motivates the development of tailored polarimetric optoelectronic devices.

Biomimetic Mineralized 3D-Printed Polycaprolactone Scaffold Induced by Self-Adaptive Nanotopology to Accelerate Bone Regeneration.

Three-dimensional (3D)-printed biodegradable polymer scaffolds are at the forefront of personalized constructs for bone tissue engineering. However, it remains challenging to create a biological microenvironment for bone growth. Herein, we developed a novel yet feasible approach to facilitate biomimetic mineralization via self-adaptive nanotopography, which overcomes difficulties in the surface biofunctionalization of 3D-printed polycaprolactone (PCL) scaffolds. The building blocks of self-adaptive nanotopography were PCL lamellae that formed on the 3D-printed PCL scaffold via surface-directed epitaxial crystallization and acted as a linker to nucleate and generate hydroxyapatite crystals. Accordingly, a uniform and robust mineralized layer was immobilized throughout the scaffolds, which strongly bound to the strands and had no effect on the mechanical properties of the scaffolds. In vitro cell culture experiments revealed that the resulting scaffold was biocompatible and enhanced the proliferation and osteogenic differentiation of mouse embryolous osteoblast cells. Furthermore, we demonstrated that the resulting scaffold showed a strong capability to accelerate in vivo bone regeneration using a rabbit bone defect model. This study provides valuable opportunities to enhance the application of 3D-printed scaffolds in bone repair, paving the way for translation to other orthopedic implants.

Hierarchically Biomimetic Scaffolds with Anisotropic Micropores and Nanotopological Patterns to Promote Bone Regeneration via Geometric Modulation.

Structural engineering is an appealing means to modulate osteogenesis without the intervention of exogenous cells or therapeutic agents. In this work, a novel 3D scaffold with anisotropic micropores and nanotopographical patterns is developed. Scaffolds with oriented pores are fabricated via the selective extraction of water-soluble polyethylene oxide from its poly(ε-caprolactone) co-continuous mixture and uniaxial stretching. The plate apatite-like lamellae are subsequently hatched on the pore walls through surface-induced epitaxial crystallization. Such a unique geometric architecture yields a synergistic effect on the osteogenic capability. The prepared scaffold leads to a 19.2% and 128.0% increase in the alkaline phosphatase activity of rat bone mesenchymal stem cells compared to that of the scaffolds with only oriented pores and only nanotopographical patterns, respectively. It also induces the greatest upregulation of osteogenic-related gene expression in vitro. The cranial defect repair results demonstrate that the prepared scaffold effectively promotes new bone regeneration, as indicated by a 350% increase in collagen I expression in vivo compared to the isotropic porous scaffold without surface nanotopology after implantation for 14 weeks. Overall, this work provides geometric motifs for the transduction of biophysical cues in 3D porous scaffolds, which is a promising option for tissue engineering applications.

Cation Bimetallic MOF Anchored Carbon Fiber for Highly Efficient Microwave Absorption.

Carbon fiber (CF) is a potential microwave absorption (MA) material due to the strong dielectric loss. Nevertheless, owing to the high conductivity, poor impedance matching of carbon-based  materials results in limited MA performance. How to solve this problem and achieve excellent MA performance remains a principal challenge. Herein, taking full advantage of CF and excellent impedance matching of bimetallic metal-organic frameworks (MOF) derivatives layer, an excellent microwave absorber based on micron-scale 1D CF and NiCoMOF (CF@NiCoMOF-800) is developed. After adjusting the oxygen vacancies of the bimetallic MOF, the resultant microwave absorber presented excellent MA properties including the minimum reflection loss (RLmin) of -80.63 dB and wide effective absorption bandwidth (EAB) of 8.01 GHz when its mass percent is only 5 wt.% and the thickness is 2.59 mm. Simultaneously, the mechanical properties of the epoxy resin (EP)-based coating with this microwave absorber are effectively improved. The hardness (H), elastic modulus (E), bending strength, and compressive strength of CF@NiCoMOF-800/EP coating are 334 MPa, 5.56 GPa, 82.2 MPa, and 135.8 MPa, which is 38%, 15%, 106% and 53% higher than EP coating. This work provides a promising solution for carbon materials achieving excellent MA properties and mechanical properties.

Antibacterial, Fatigue-Resistant, and Self-Healing Dressing from Natural-Based Composite Hydrogels for Infected Wound Healing.

The treatment of infected wounds faces substantial challenges due to the high incidence and serious infection-related complications. Natural-based hydrogel dressings with favorable antibacterial properties and strong applicability are urgently needed. Herein, we developed a composite hydrogel by constructing multiple networks and loading ciprofloxacin for infected wound healing. The hydrogel was synthesized via a Schiff base reaction between carboxymethyl chitosan and oxidized sodium alginate, followed by the polymerization of the acrylamide monomer. The resultant hydrogel dressing possessed a good self-healing ability, considerable compression strength, and reliable compression fatigue resistance. In vitro assessment showed that the composite hydrogel effectively eliminated bacteria and exhibited an excellent biocompatibility. In a model of Staphylococcus aureus-infected full-thickness wounds, wound healing was significantly accelerated without scars through the composite hydrogel by reducing wound inflammation. Overall, this study opens up a new way for developing multifunctional hydrogel wound dressings to treat wound infections.

Tripterygium wilfordii Hook.f induced kidney injury through mediating inflammation via PI3K-Akt/HIF-1/TNF signaling pathway: A study of network toxicology and molecular docking.

We intend to explore potential mechanisms of Tripterygium wilfordii Hook.f (TwHF) induced kidney injury (KI) using the methods of network toxicology and molecular docking. We determined TwHF potential compounds with its targets and KI targets, obtained the TwHF induced KI targets after intersecting targets of TwHF and KI. Then we conducted protein-protein interaction (PPI) network, gene expression analysis, gene ontology (GO) function and Kyoto encyclopedia of genes and genomes (KEGG) pathway enrichment analysis to explore the mechanism of TwHF-induced KI. Finally we conducted molecular docking to verify the core toxic compounds and the targets. We obtained 12 TwHF toxic compounds and 62 TwHF-induced KI targets. PPI network, gene expression analysis and GO function enrichment analysis unveiled the key biological process and suggested the mechanism of TwHF-induced KI might be associated with inflammation, immune response, hypoxia as well as oxidative stress. KEGG pathway enrichment analysis indicated PI3K-Akt signaling pathway, HIF-1 signaling pathway and TNF signaling pathway were key signaling pathways of TwHF induced KI. Molecular docking showed that the binding energy of core targets and toxic compounds was all less than -6.5 kcal/mol that verified the screening ability of network pharmacology and provided evidence for modifying TwHF toxic compounds structure. Through the study, we unveiled the mechanism of TwHF induce KI that TwHF might activate PI3K-Akt signaling pathway as well as TNF signaling pathway to progress renal inflammation, mediate hypoxia via HIF-1 signaling pathway to accelerate inflammatory processes, and also provided a theoretical basis for modifying TwHF toxic compounds structure as well as supported the follow-up research.

Periodic Lamellae-Based Nanofibers for Precise Immunomodulation to Treat Inflammatory Bone Loss in Periodontitis.

Periodontitis is a common oral disease accompanied by inflammatory bone loss. The pathological characteristics of periodontitis usually accompany an imbalance in the periodontal immune microenvironment, leading to difficulty in bone regeneration. Therefore, effective treatment strategies are needed to modulate the immune environment in order to treat periodontitis. Here, highly-oriented periodic lamellae poly(ε-caprolactone) electrospun nanofibers (PLN) are developed by surface-directed epitaxial crystallization. The in vitro result shows that the PLN can precisely modulate macrophage polarization toward the M2 phenotype. Macrophages polarized by PLN significantly enhance the migration and osteogenic differentiation of Bone marrow stromal cells. Notably, results suggest that the topographical cues presented by PLN can modulate macrophage polarization by activating YAP, which reciprocally inhibits the NF-κB signaling pathway. The in vivo results indicate that PLN can inhibit inflammatory bone loss and facilitate bone regeneration in periodontitis. The authors' findings suggest that topographical nanofibers with periodic lamellae is a promising strategy for modulating immune environment to treat inflammatory bone loss in periodontitis.

Nano-Topographically Guided, Biomineralized, 3D-Printed Polycaprolactone Scaffolds with Urine-Derived Stem Cells for Promoting Bone Regeneration.

Currently, biomineralization is widely used as a surface modification approach to obtain ideal material surfaces with complex hierarchical nanostructures, morphologies, unique biological functions, and categorized organizations. The fabrication of biomineralized coating for the surfaces of scaffolds, especially synthetic polymer scaffolds, can alter surface characteristics, provide a favorable microenvironment, release various bioactive substances, regulate the cellular behaviors of osteoblasts, and promote bone regeneration after implantation. However, the biomineralized coating fabricated by immersion in a simulated body fluid has the disadvantages of non-uniformity, instability, and limited capacity to act as an effective reservoir of bioactive ions for bone regeneration. In this study, in order to promote the osteoinductivity of 3D-printed PCL scaffolds, we optimized the surface biomineralization procedure by nano-topographical guidance. Compared with biomineralized coating constructed by the conventional method, the nano-topographically guided biomineralized coating possessed more mineral substances and firmly existed on the surface of scaffolds. Additionally, nano-topographically guided biomineralized coating possessed better protein adsorption and ion release capacities. To this end, the present work also demonstrated that nano-topographically guided biomineralized coating on the surface of 3D-printed PCL scaffolds can regulate the cellular behaviors of USCs, guide the osteogenic differentiation of USCs, and provide a biomimetic microenvironment for bone regeneration.

Transperitoneal vs retroperitoneal laparoscopic radical nephrectomy: a double-arm, parallel-group randomized clinical trial.

OBJECTIVE: To compare the outcomes of patients undergoing Retroperitoneal laparoscopic Radical nephrectomy (RLRN) and Transperitoneal laparoscopic Radical nephrectomy (TLRN). METHODS: A total of 120 patients with localized renal cell carcinoma were randomized into either RLRN or TLRN group. Mainly by comparing the patient perioperative related data, surgical specimen integrity, pathological results and tumor results. RESULTS: Each group comprised 60 patients. The two group were equivalent in terms of perioperative and pathological outcomes. The mean integrity score was significantly lower in the RLRN group than TLRN group. With a median follow-up of 36.4 months after the operation, Kaplan-Meier survival analysis showed no significant difference between RLRN and TLRN in overall survival (89.8% vs. 88.5%; P = 0.898), recurrence-free survival (77.9% vs. 87.7%; P = 0.180), and cancer-specific survival (91.4% vs. 98.3%; P = 0.153). In clinical T2 subgroup, the recurrence rate and recurrence-free survival in the RLRN group was significantly worse than that in the TLRN group (43.2% vs. 76.7%, P = 0.046). Univariate and multivariate COX regression analysis showed that RLRN (HR: 3.35; 95%CI: 1.12-10.03; P = 0.030), male (HR: 4.01; 95%CI: 1.07-14.99; P = 0.039) and tumor size (HR: 1.23; 95%CI: 1.01-1.51; P = 0.042) were independent risk factor for recurrence-free survival. CONCLUSIONS: Our study showed that although RLRN versus TLRN had roughly similar efficacy, TLRN outperformed RLRN in terms of surgical specimen integrity. TLRN was also significantly better than RLRN in controlling tumor recurrence for clinical T2 and above cases. TRIAL REGISTRATION: Chinese Clinical Trial Registry ( https://www.chictr.org.cn/showproj.html?proj=24400 ), identifier: ChiCTR1800014431, date: 13/01/2018.

Auraptene Mitigates Colitis Induced by Dextran Sulfate Sodium in Mice by Regulating Specific Intestinal Flora and Repairing the Intestinal Barrier.

Auraptene (AUT) is widely known to possess both antioxidant and anti-inflammatory properties. This study attempted to evaluate the protective effects of AUT in dextran sodium sulfate (DSS)-induced colitis in mice and to determine the underlying molecular mechanisms. Our results suggest that AUT substantially minimizes the severity and worsening of DSS-induced colitis in mice, indicated by the lengthening of the colon, lower disease activity index, reduced oxidation levels, and attenuated inflammatory factors. Molecular studies revealed that AUT reduces the nuclear translocation of nuclear factor-κB (NF-κB), thereby inhibiting the expression of inflammatory factors. Additionally, AUT promotes the diversity of the intestinal flora in mice with colitis by increasing the number of beneficial bacteria such as Lactobacillaceae and lowering the number of harmful bacteria. In conclusion, AUT mitigates DSS-induced colitis by maintaining the integrity of the intestinal barrier and modulating the levels of the intestinal microbial species.

Hierarchically porous cellulose-based carbon aerogels with N-doped skeletons and encapsulated iron-based catalysts for efficient tetracycline catalytic degradation.

Three-dimensional interpenetrating and hierarchically porous carbon material is an efficient catalyst support in water remediation and it is still a daunting challenge to establish the relationship between hierarchically porous structure and catalytic degradation performance. Herein, a highly porous silica (SiO2)/cellulose-based carbon aerogel with iron-based catalyst (FexOy) was fabricated by in-situ synthesis, freeze-drying and pyrolysis, where the addition of SiO2 induced the hierarchically porous morphology and three-dimensional interpenetrating sheet-like network with nitrogen doping. The destruction of cellulose crystalline structure by SiO2 and the iron-catalyzed breakdown of glycosidic bonds synergistically facilitated the formation of electron-rich graphite-like carbon skeleton. The unique microstructure is confirmed to be favorable for the diffusion of reactants and electron transport during catalytic process, thus boosting the catalytic degradation performance of carbon aerogels. As a result, the catalytic degradation efficiency of tetracycline under light irradiation by adding only 5 mg of FexOy/SiO2 cellulose carbon aerogels was as high as 90 % within 60 min, demonstrating the synergistic effect of photocatalysis and Fenton reaction. This ingenious structure design provides new insight into the relationship between hierarchically porous structure of carbon aerogels and their catalytic degradation performance, and opens a new avenue to develop cellulose-based carbon aerogel catalysts with efficient catalytic performance.

Peelable Microwave Absorption Coating with Reusable and Anticorrosion Merits.

The peelable microwave absorption (MA) coating with reversible adhesion for stable presence on substrates and easy release without any residuals is highly desired in temporary electromagnetic protection, which can quickly enter and disengage the electromagnetic protection state according to the real-time changeable harsh surroundings. On the contrary, with the incorporation of abundant absorbent to achieve excellent MA ability, the tunable adhesion and sufficient cohesion are extremely challenging to fulfill the above requirement. The reported peelable coatings still have problems in controlling adhesion/cohesion strength and coating release, facing substantial residuals after peeling even using complex chemical modification or abundant additives. Herein, a peelable MA coating based on the block characteristics of polar and nonpolar segments of poly(styrene-(ethylene-co-butylene)-styrene) (SEBS) is successfully developed. The polyaniline-decorated carbon nanotube as a microwave absorber plays a positive influence on the adhesion/cohesion of the coating due to bonding interaction. The competitive effective absorption bandwidth (EAB) of 8.8 GHz and controllable yet reversible adhesion release on various substrates and complex surfaces have been achieved. The reusability endows peelable MA coating with 93% retention of EAB even after ten coating-peeling cycles. The coating with excellent chemical and adhesion stability can effectively protect substrates from salt/acid/alkali corrosion, showing over 98% retention of EAB even after 8 h of accelerated corrosion. Our peelable MA coating via a general yet reliable approach provides a prospect for temporary electromagnetic protection.

Noninvasive In Vivo Imaging of T-Cells during Cancer Immunotherapy Using Rare-Earth Nanoparticles.

Only a minority of patients respond positively to cancer immunotherapy, and addressing this variability is an active area of immunotherapy research. Infiltration of tumors by immune cells is one of the most significant prognostic indicators of response and disease-free survival. However, the ability to noninvasively sample the tumor microenvironment for immune cells remains limited. Imaging in the near-infrared-II region using rare-earth nanocrystals is emerging as a powerful imaging tool for high-resolution deep-tissue imaging. In this paper, we demonstrate that these nanoparticles can be used for noninvasive in vivo imaging of tumor-infiltrating T-cells in a highly aggressive melanoma tumor model. We present nanoparticle synthesis and surface modification strategies for the generation of small, ultrabright, and biocompatible rare-earth nanocrystals necessary for deep tissue imaging of rare cell types. The ability to noninvasively monitor the immune contexture of a tumor during immunotherapy could lead to early identification of nonresponding patients in real time, leading to earlier interventions and better outcomes.

Association of urinary thallium with hypertension in children and adolescents aged 8-17 years: NHANES 2005-2018.

Hypertension is a key risk factor for cardiovascular disease (CVD). Thallium is a highly toxic metal that exists in all aspects of our lives and can cause damage to human health. The aim of this study was to identify the potential correlation between urinary thallium (U-Tl) and hypertension in American youth aged 8-17 years. The National Health and Nutritional Examination Survey (NHANES) database was mined for cross-sectional information on 2295 American children and adolescents aged 8-17 years. Inductively coupled plasma mass spectrometry (ICP-MS) was utilized to measure U-Tl levels, and the results were categorized into four quartiles (Q1-Q4). Logistic generalized linear models and unweighted restricted cubic spline (RCS) regression were used to investigate the relationship between U-Tl and hypertension. After adjusting for covariates, the odds ratios (ORs) at 95% confidence intervals (CIs) for hypertension prevalence in the 2nd, 3rd, and 4th quartiles were 0.43 (0.22-0.81), 0.54 (0.29-0.99), and 0.43 (0.22-0.81), when compared to the lowest quartile (P for trend = 0.024). RCS plot showed a negative linear correlation between log2-transformed U-Tl levels and hypertension (P for non-linearity = 0.869). Subgroup analysis based on sex indicated a statistically significant link between U-Tl and hypertension in male (P < 0.05). There is a negative linear relationship between U-Tl and hypertension in American children and adolescents aged 8-17 years with low thallium exposure. Due to the nature of cross-sectional studies, further studies are necessary to validate our conclusions and elucidate possible mechanisms.