RESUMO
It is self-evident that our chests expand and contract during breathing but, surprisingly, exactly how individual alveoli change shape over the respiratory cycle is still a matter of debate. Some argue that all the alveoli expand and contract rhythmically. Others claim that the lung volume change is due to groups of alveoli collapsing and reopening during ventilation. Although this question might seem to be an insignificant detail for healthy individuals, it might be a matter of life and death for patients with compromised lungs. Past analyses were based on static post-mortem preparations primarily due to technological limitations, and therefore, by definition, incapable of providing dynamic information. In contrast, this study provides the first comprehensive dynamic data on how the shape of the alveoli changes, and, further, provides valuable insights into the optimal lung volume for efficient gas exchange. It is concluded that alveolar micro-dynamics is nonlinear; and at medium lung volume, alveoli expand more than the ducts.
RESUMO
The tree frog is a prominent amphibian among terrestrial vertebrates known for its ability to adhere to various surfaces through the capillary forces of water in the microchannels between micropillars on its disc-shaped toe pads, a phenomenon known as wet adhesion. However, the secretion pattern of mucus on the attachment surface of living tree frog toe pads and the distribution of active mucus pores (AMPs) have not yet been fully elucidated. In this study, we utilized synchrotron X-ray micro-computed tomography and interference reflection microscopy to obtain the spatial distribution of the entire population of ventral mucus glands on the toe pads of living tree frogs and the real-time mucus secretion patterns from the ventral mucus pores on the contact surface under different environmental conditions. We observed that the number and secretion frequency of AMPs on the toe pad are regulated according to environmental conditions. Such dynamic mucus secretion on the tree frog's toe pad could contribute to the understanding of capillary force regulation for wet adhesion and the development of adhesive surfaces by mimicking the mucus-secreting toe pad.
RESUMO
Herein, an Au-coating layer adjusted on the surface of a Zn metal electrode that effectively suppresses the dendrite growth as well as the mechanisms underlying the dendrite suppression as a result of the zincophilic character of Au is introduced. For the Au-coated Zn metal symmetric cell, uniform deposition of Zn-derived compounds was revealed by operando synchrotron tomography. Microscopic studies demonstrate that the Au-coating layer is induced to form a new Zn-Au alloy during the initial Zn deposition, resulting in stabilized long-term stripping/plating of Zn via the 'embracing effect' that intimately accommodates Zn deposition for further cycles. This property supports the successful operation of symmetrical cells up to 50 mA cm-2 . According to Zn electrodeposition simulation, it is verified that the suppression of dendrite growth is responsible for the electro-conducting Au nanolayer that uniformly distributes the electric field and protects the Zn electrode from corrosion, ultimately promoting uniform Zn growth. The compatibility of the Au-coating layer for full cell configuration is verified using NaV3 O8 as a cathode material over 1 000 cycles. This finding provides a new pathway for the enhancement of the electrochemical performance of ZIBs by suppressing the dendritic growth of Zn by means of a zincophilic Au nanolayer.
RESUMO
The understanding of structural defects in basal-faceted sapphire ribbons was improved through X-ray imaging at a synchrotron source. The combination of phase contrast and X-ray diffraction makes it possible to visualize and characterize both gas voids and dislocations in the bulk of the ribbons grown by the Stepanov-LaBelle technology. Dislocations were directly related to gas voids. X-ray diffraction topography was employed to investigate the distribution, configurations, and character of the dislocations. The formation of voids of irregular shapes was detected by large-area mapping with spatial resolution in the µm range. Computer simulations of the experimental phase contrast images of microvoids were performed. The sizes of the spherical microvoids were determined. The results are discussed with reference to the available data on the emission of dislocations from the voids. The evolution of the shape, size, and arrangement of the voids during growth provides clues on the formation of block structure in basal-faceted sapphire ribbons.
RESUMO
OBJECTIVES: This study evaluated suture tie-down forces and cyclic contractile forces (CCFs) after undersized tricuspid annuloplasty using a hybrid band. METHODS: Downsized tricuspid annuloplasty was planned in adult male sheep using 8 force transducers attached from the septal to the anterior annular areas of the ring (segments 1 and 2, flexible septal; segments 3 and 4, semi-rigid posterior; segments 5 and 6, semi-rigid anterior; segments 7 and 8, flexible anterior). CCFs were analysed at 3 different levels of peak right ventricular pressure (RVP): 30, 50 and 70 mmHg. RESULTS: Eight 5-year-old male Corriedale sheep (average body weight = 66.8 kg) were used. The average suture tie-down force was 4.42 [standard deviation (SD): 2.32] N. When the forces were compared, it was lowest in the flexible anterior area and highest in the flexible septal area (P < 0.001). With the RVP of 30 mmHg, the average CCFs was lowest at segment 3 [0.07 (SD: 0.07) N] and highest at segment 7 [0.15 (SD: 0.08) N]. The CCFs were 0.12 (SD: 0.1) N, 0.09 (SD: 0.12) N, 0.14 (SD: 0.1) N and 0.13 (SD: 0.09) N in the flexible septal, semi-rigid posterior, semi-rigid anterior and flexible anterior parts, respectively (P = 0.208). As the peak RVP increased to 50 and 70 mmHg, the CCFs of each area increased significantly (P < 0.001). Despite this increase, the CCFs remained low (0.1 and 0.3 N), and differences in CCFs between segments and between annular areas showed similar patterns. CONCLUSIONS: The flexible end of the hybrid band reduces the CCFs and might prevent annular tears after ring tricuspid annuloplasty, and the risk of tear would be low even in the septal area.
RESUMO
Recently, high-efficiency III-nitride photonic emitters (PEs) for next-generation displays have been studied. Although micro-light-emitting diodes (µ-LEDs), one of the III-nitride PEs, have attracted considerable attention because of their high efficiency and size flexibility, they have encountered technical limitations such as high defect rate, high processing cost, and low yield. To overcome these drawbacks of µ-LEDs, a lot of research on PEs using one-dimensional (1D) gallium nitride-related nanorods (GNRs) capable of horizontally self-positioning on the electrodes has been carried out. The degree of array of GNRs on the interdigitated electrodes (IDEs) is an important factor in the efficiency of the PEs using GNRs to obtain excellent single-pixel characteristics. Therefore, in this study, we demonstrate that the improved performance of self-arrayed GNRs was realized using the dielectrophoresis technique by changing the thickness of IDEs. In addition, the shape and size of vertically aligned GNRs were controlled by the wet process, and GNR-integrated PEs (GIPEs) were driven by perfectly horizontally self-arrayed GNRs on IDEs. The electroluminescence (EL) intensity of the GIPEs was measured at 4-20 V and showed a maximum intensity value at 15 V. Over the injection voltage at 20 V, the EL intensity decreased due to the high current density of GIPEs. The external quantum efficiency (EQE) property of the GIPEs showed a similar efficiency droop as that of conventional III-nitride PEs.
RESUMO
Alcohol ingested by humans can be analyzed via breath tests; however, approximately 1% can be excreted via the skin. In this paper, we present a capacitive sensor using hydrophobically treated anodic aluminum oxide (AAO) capable of detecting alcohol excreted through the epidermis. The degree of hydrophobicity based on the duration of exposure to 3-aminopropyltriethoxysilane vapor comprising a small number of Si-NH2 functional groups on the AAO surface was confirmed and the optimal exposure time was confirmed to be 60 min. The hydrophobized AAO showed a 4.8% reduction in sensitivity to moisture. Simultaneously, the sensitivity of the sensor to ethanol decreased by only 12%. Lastly, the fabricated sensor was successfully operated by attaching it to an ankle-type breathalyzer.
RESUMO
Although oil-water separation technology via wettability-controlled membranes has emerged as a promising technology to treat oily wastewater, membrane fouling by faulents such as sludge flocs and colloids, and the consequent clogging of pores, severely degrades the efficiency of filtration systems. One of the main promotors of fouling by faulents is oil fouling, which is also a form of fouling itself. Despite considerable practical and academic interest in the analysis of oil-fouled membranes, direct visualization of the entire process of oil infiltration into hydrophilic membranes is still preliminary owing to (i) the similar optical contrast and physical density between oil and water, (ii) the low penetration depth of imaging methods, and (iii) the lack of 3D segmentation capability. In this study, microcomputed X-ray tomography using tunable synchrotron radiation provided direct high-speed 3D visualization of the microscale dynamics of the oil infiltration of a prewetted hydrophilic filter membrane over time. Direct visualization of the interfacial dynamics of oil infiltration opens a window into the complex liquid (water/oil)-gas-solid interface and thus helps furnish an in-depth understanding of oil fouling in the prewetted membrane.
Assuntos
Purificação da Água , Membranas Artificiais , Óleos , Síncrotrons , Purificação da Água/métodos , Microtomografia por Raio-XRESUMO
Intermetallic copper telluride thin films, which are important in a number of electronics fields, were electrodeposited using a potentiostatic method in low-pH aqueous electrolyte baths with various ion-source concentrations, and the electrical properties of the formed films were investigated after exfoliation from the substrate. The films were electrochemically analyzed by cyclic voltammetry, while surface and cross-sectional morphologies, compositional ratios, and electrical properties were analyzed by scanning electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and Hall-effect experiments. The copper telluride thin films, which were synthesized at various potentials in each bath, exhibit different composition ratios and structures; consequently, they show a variety of electrical and thermoelectric properties, including different electrical conductivities, carrier concentrations, mobilities, and Seebeck coefficients. Among them, the thin film with a 1:1 Cu:Te ratio delivered the highest power factor due to carrier filtering at the interface between the two phases.
RESUMO
Data of the outcomes of ventricular septal defect (VSD) closure in adults are limited to establish recommendations. Therefore, we reviewed our experience with surgical VSD closure in adult patients. We retrospectively reviewed 152 patients who underwent surgical VSD closure between January 1996 and April 2020. The median age of the patients was 30.5 [interquartile range (IQR) 23.1-42.7] years. The median follow-up duration was 10.9 (IQR 4.8-16.1) years. VSDs were classified according to the Society of Thoracic Surgeons classification as type 2 (n = 66, 43.4%), type 1 (n = 59, 38.8%), and type 4 (n = 27, 17.8%). Aortic cusp prolapse (n = 86, 56.6%) and aortic valve regurgitation (AR, n = 75, 49.3%) were the most common indications for surgical closure. Four patients underwent late reoperation (2.6%) due to AR, infective endocarditis and residual VSD. In the log-rank test, preoperative trivial or more degree of AR (P = 0.004) and coronary cusp deformity (P = 0.031) was associated with late moderate or greater degree of AR. Preoperative moderate or greater AR was associated with reoperation (P = 0.047). Only concomitant aortic valve (AV) repair at the time of VSD closure was a significant risk factor for late significant AR progression in the multivariable analysis. VSD closure in adults can be performed with low mortality and morbidity rates. AR can progress after VSD closure because the aortic cusp may have irreversible damage from long-standing shunt flow exposure. We conclude that VSD with AV deformity or AR in adults should be treated aggressively before disease progression with irreversible damage occurs.
Assuntos
Insuficiência da Valva Aórtica , Procedimentos Cirúrgicos Cardíacos , Comunicação Interventricular , Adulto , Insuficiência da Valva Aórtica/etiologia , Procedimentos Cirúrgicos Cardíacos/efeitos adversos , Comunicação Interventricular/complicações , Humanos , Estudos Retrospectivos , Resultado do Tratamento , Adulto JovemRESUMO
Understanding the dynamics of immiscible fluid in a porous media is critical in many chemical and environmental engineering processes. However, the geological heterogeneity effect on multiphase flow behavior remains unclear. Here, the dynamics of immiscible fluid displacement and entrapment were experimentally demonstrated at pore-level using time-lapse synchrotron X-ray microtomography. A drainage-imbibition experiment was designed using an unconsolidated layered sand pack that comprised coarse sand and fine sand zones. There were significant differences between the two zones, with regard to the temporal variations in fluid saturation and morphological evolution of nonwetting fluid (oil) during imbibition. Highly connected oil clusters in the coarse zone broke up into many small fragments, whereas the cluster in the fine zone remained connected while spanning multiple pores. To further understand the impacts of pore size and connectivity on multiphase fluid dynamics, a new approach that tracks the temporal variation of immiscible fluid in individual pores was conducted. The surface area at the oil-water interface increased during imbibition, which is expected to facilitate mass transfer and surface interactions. Understanding immiscible fluid displacement in layered porous media at the pore-level could lead to more effective environmental remediation.
Assuntos
Recuperação e Remediação Ambiental , Síncrotrons , Geologia , Porosidade , Microtomografia por Raio-XRESUMO
The most promising approach for improving the electrical performance of connectors used in semiconductor test sockets involves increasing their electrical conductivity by incorporating one-dimensional (1D) conductive materials between zero-dimensional (0D) conductive materials. In this study, FeCo nanowires were synthesized by electroplating to prepare a material in which 1D materials could be magnetically aligned. Moreover, the nanowires were coated with highly conductive Au. The magnetization per unit mass of the synthesized FeCo and FeCo@Au nanowires was 167.2 and 13.9 emu/g, respectively. The electrical performance of rubber-based semiconductor connectors before and after the introduction of synthetic nanowires was compared, and it was found that the resistance decreased by 14%. The findings reported herein can be exploited to improve the conductivity of rubber-type semiconductor connectors, thereby facilitating the development of connectors using 0D and 1D materials.
RESUMO
BACKGROUND: Pulmonary valve replacement (PVR) is often performed in patients with repaired tetralogy of Fallot (TOF). Concomitant tricuspid valvuloplasty (TVP) in those with tricuspid regurgitation (TR) at the time of PVR is still controversial. METHOD: We retrospectively reviewed clinical records of patients who underwent PVR between 2001 and 2012. We analyzed the impact of concomitant TVP on the tricuspid valve function and right ventricle function and size in mid-term. RESULTS: 119 patients with mild to moderate TR at the time of PVR were enrolled. 33 patients underwent concomitant TVP (TVP group) and 86 patients underwent PVR alone (no-TVP group). There was a significant reduction of TR (p < 0.001) and right ventricular end-diastolic volume index (RVEDVi) (p < 0.001). However, in patients who showed prosthetic pulmonary valve (PV) failure at the last follow-up, there was no significant decrease in TR regardless of concomitant TVP. In the patients with preserved prosthetic PV function, TR was significantly improved (p < 0.001 in both groups). The multivariable analysis showed that significant risk factors for recurrence of significant TR were preoperative moderate TR and prosthetic PV failure. CONCLUSIONS: After PVR in repaired TOF patients, there was an improvement in the degree of TR and the RVEDVi. Concomitant TVP at the time of PVR may not be able to prevent the recurrence of TR when prosthetic PV failure occurs; however, it may effectively preserve tricuspid valve function until that time.
Assuntos
Implante de Prótese de Valva Cardíaca , Insuficiência da Valva Pulmonar , Valva Pulmonar , Tetralogia de Fallot , Humanos , Valva Pulmonar/cirurgia , Insuficiência da Valva Pulmonar/etiologia , Insuficiência da Valva Pulmonar/cirurgia , Estudos Retrospectivos , Tetralogia de Fallot/cirurgia , Resultado do Tratamento , Valva Tricúspide/cirurgiaRESUMO
The new Brain Imaging Beamline (BIB) of the Taiwan Photon Source (TPS) has been commissioned and opened to users. The BIB and in particular its endstation are designed to take advantage of bright unmonochromatized synchrotron X-rays and target fast 3D imaging, â¼1â ms exposure time plus very high â¼0.3â µm spatial resolution. A critical step in achieving the planned performances was the solution to the X-ray induced damaging problems of the detection system. High-energy photons were identified as their principal cause and were solved by combining tailored filters/attenuators and a high-energy cut-off mirror. This enabled the tomography acquisition throughput to reach >1â mm3â min-1, a critical performance for large-animal brain mapping and a vital mission of the beamline.
Assuntos
Encéfalo/diagnóstico por imagem , Imageamento Tridimensional , Lesões por Radiação/prevenção & controle , Microtomografia por Raio-X/instrumentação , Animais , Desenho de Equipamento , Fótons , Síncrotrons , TaiwanRESUMO
Atrioventricular valve regurgitation (AVVR) is associated with increased morbidity and mortality in patients with single ventricle physiology. The purpose of this study was to evaluate the long-term results of the surgical management of AVVR and to analyze the effects of AV valve replacement. The medical records of 38 single ventricle patients who underwent atrioventricular valve surgery more than once between January 2001 and March 2018 were retrospectively reviewed. We analyzed and compared clinical data of patients who underwent valve replacement as an initial treatment (n = 8) for AVVR with patients who initially underwent valve repair (n = 30). The median follow-up duration was 98.1 months (range, 0.9-209.6 months). There was one early mortality and seven late mortalities. Freedom from reoperation between the two groups at 15 years of follow-up was significantly different: 18.3% in the repair group and 100% in the replacement group (p = 0.013). The replacement group showed a better overall survival rate (100%) at 15 years than the repair group (68.5%) without statistical significance (p = 0.097). All mortalities occurred in the repair group. Nine patients in the repair group (30%) and one patient in the replacement group (12.5%) showed preoperative ventricular dysfunction. RV-type single ventricle with atrioventricular (AV) valve annular dilatation was found out as a risk factor of AVV replacement both in univariate (p = 0.04) and multivariate (p = 0.004) analysis. AV valve replacement might be considered as a primary treatment option for patients who have an annular dilation with an RV-type single ventricle rather than repeated valvuloplasty.
Assuntos
Coração Univentricular , Valvas Cardíacas/cirurgia , Humanos , Lactente , Reoperação , Estudos Retrospectivos , Fatores de Tempo , Resultado do TratamentoRESUMO
Tillandsia usneoides in epiphytic bromeliads takes up water through absorptive trichomes on the shoot surface under extreme environmental conditions. Although previous studies revealed the way by which T. usneoides absorbs water and prevents water loss, its water transport remains unclear. We characterized structures of trichome wings of T. usneoides. Wing length-to-thickness ratio of 136 and trichome interval (d)-to-wing length (l) ratio (d/l) smaller than 1 caused the water film to flatten the wings sequentially, resulting in domino-like water transport. A hinge-like linkage between wing and outer ring cells and the wing size longer than the elastocapillary length (LEC ) brought about this unique reconfiguration, which is the flattening and recovery of wings. Tillandsia usneoides transported water rapidly on the surface as the water film propagated on the exterior trichomes with flexible wings and the transport distance at the macroscopic scale grew as tx with x = 0.68 ± 0.04, unlike the conventional scaling of t0.5 . Empirical and theoretical investigations proved our assumption that external water transport with the domino-like effect predominated over internal vascular transport. Biomimetic trichome wings simulated the domino-like water transport, highlighting the important role of flexible wing arrays.
Assuntos
Tillandsia , Transporte Biológico , Folhas de Planta , Tricomas , ÁguaRESUMO
OBJECTIVES: This study was conducted to measure suture tie-down forces and evaluate cyclic contractile forces (CCFs) in beating hearts after undersized 3-dimensional (3D) rigid-ring tricuspid valve annuloplasty (TAP). METHODS: Eight force transducers were attached to the 3D rigid TAP ring. Segments 1 to 8 were attached from the mid-septal to anterior-septal commissural area in a counterclockwise order. Two-sizes-down ring TAPs were performed in 6 sheep. Tie-down forces and CCF were recorded and analysed at the 8 annular segments and at 3 levels of peak right ventricular pressure (RVP: 30, 50 and 70 mmHg). RESULTS: The overall average tie-down forces and CCF were 4.34 ± 2.26 newtons (N) and 0.23 ± 0.09 N, respectively. The CCF at an RVP of 30 mmHg were higher at 3 commissural areas (segments 3, 5 and 8) than at the other segments. The increases in the CCF following changes in the RVP were statistically significant only at the 3 commissural areas (P = 0.012). However, mean CCFs remained low at all annular positions (ranges of average CCF = 0.06-0.46 N). CONCLUSIONS: The risk of suture dehiscence after down-sized 3D rigid-ring TAP might be minimal because the absolute forces remained low in all annular positions even in the condition of high RVP. However, careful suturing in the septal annular area and commissures is necessary to prevent an annular tear during a down-sized 3D rigid-ring TAP.
Assuntos
Próteses Valvulares Cardíacas , Anuloplastia da Valva Mitral , Insuficiência da Valva Tricúspide , Animais , Desenho de Prótese , Ovinos , Suturas , Valva Tricúspide/cirurgia , Insuficiência da Valva Tricúspide/cirurgiaRESUMO
Thermoelectric devices based power generation and cooling systemsystem have lot of advantages over conventional refrigerator and power generators, becausebecause of solid-state devicesdevices, compact size, good scalability, nono-emissions and low maintenance requirement with long operating lifetime. However, the applications of thermoelectric devices have been limited owingowing to their low energy conversion efficiency. It has drawn tremendous attention in the field of thermoelectric materials and devices in the 21st century because of the need of sustainable energy harvesting technology and the ability to develop higher performance thermoelectric materials through nanoscale science and defect engineering. Among various fabrication methods, electrodeposition is one of the most promising synthesis methods to fabricate devices because of its ability to control morphology, composition, crystallinity, and crystal structure of materials through controlling electrodeposition parameters. Additionally, it is an additive manufacturing technique with minimum waste materials that operates at near room temperature. Furthermore, its growth rate is significantly higher (i.e., a few hundred microns per hour) than the vacuum processes, which allows device fabrication in cost effective matter. In this paper, the latest development of various electrodeposited thermoelectric materials (i.e., Te, PbTe, Bi2Te3 and their derivatives, BiSe, BiS, Sb2Te3) in different forms including thin films, nanowires, and nanocomposites were comprehensively reviewed. Additionally, their thermoelectric properties are correlated to the composition, morphology, and crystal structure.
RESUMO
BACKGROUND: The 2 surgical strategies for neonates with ductal-dependent pulmonary atresia and ventricular septal defect are primary biventricular repair (BVR) or initial palliation with a modified Blalock-Taussig shunt (BTS) followed by second stage repair. In this study, we report the combined outcomes from 2 hospitals using different strategies. METHODS: Between 2004 and 2017, 66 neonates underwent surgery with palliative shunts (BTS group: n = 30, 45.5%) or primary biventricular repair (pBVR group: n = 36, 54.5%). The 2 groups were similar in age, body weight, and Nakata index scores. The overall mean follow-up duration was 7.51 ± 4.35 years, and early and late results were compared between the groups. RESULTS: The 10-year overall survival was 84.8% (94.4% for pBVR vs 75.7% for BTS, P = .032). The BTS group had 2 early and 6 interstage mortalities, and the pBVR group had no early and 2 late mortalities. In the BTS group, the Nakata index score significantly increased during the interstage period (P < .001). In univariable analysis, genetic or extracardiac anomalies were a risk factor for mortality (hazard ratio, 5.56; P = .038). After achieving BVR, the pBVR group underwent significantly more frequent right ventricle outflow tract reinterventions (P < .001) at a much earlier period (P = .017) compared with the BTS group. CONCLUSIONS: In neonates with ductal-dependent pulmonary atresia and ventricular septal defect, the primary BVR approach provides an excellent survival rate, but the burden of right ventricle outflow tract reintervention is heavy. The staged approach with BTS promotes pulmonary artery growth, but hospital and interstage mortality are significant. Genetic and extracardiac anomalies are significant risk factors for mortality.
Assuntos
Anormalidades Múltiplas/cirurgia , Procedimento de Blalock-Taussig , Comunicação Interventricular/cirurgia , Atresia Pulmonar/cirurgia , Procedimentos Cirúrgicos Cardíacos/métodos , Feminino , Humanos , Recém-Nascido , Masculino , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Heavy-metal-free carbon materials were prepared from spent coffee grounds (SCG) using the coupled KOH-urea and NaOH-urea as activating agents, and these were compared with SCG activation by the alkali salts alone. SCG was impregnated with the activating agents before being pyrolyzed at 800 °C under a N2 atmosphere. Characterization of the as-pyrolyzed carbon materials was performed by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and measurement of N2 adsorption-desorption isotherms. The carbon materials were utilized for the adsorption of methylene blue (MB) in aqueous solutions. Combining KOH and urea as activating agents resulted in the generation of pertinent SCG-derived carbon material properties, including a large surface area (1665.45 m2 g-1) and excellent MB adsorption capacity. Adsorption efficiencies were studied using adsorption kinetics (pseudo-first-order and pseudo-second-order) and adsorption isotherm (Langmuir, Freundlich, and Temkin) models. The influences of pH and temperature were investigated. The results of this work raise new possibilities for synthesizing carbon materials with high MB adsorption capacities from biowastes, via less-toxic, energy-saving conventional pyrolysis methods for water-treatment applications.