RESUMO
Triboelectric nanogenerators (TENGs) have become reliable green energy harvesters by converting biomechanical motions into electricity. However, the inevitable charge leakage and poor electric field (EF) of conventional TENG result in inferior tribo-charge density on the active layer. In this paper, TiO2-MXene incorporated polystyrene (PS) nanofiber membrane (PTMx NFM) charge trapping interlayer is introduced into single electrode mode TENG (S-TENG) to prevent electron loss at the electrode interface. Surprisingly, this charge-trapping mechanism augments the surface charge density and electric output performance of TENGs. Polyvinylidene difluoride (PVDF) mixed polyurethane (PU) NFM is used as tribo-active layer, which improves the crystallinity and mechanical property of PVDF to prevent delamination during long cycle tests. Herein, the effect of this double-layer capacitive model is explained experimentally and theoretically. With optimization of the PTMx interlayer thickness, S-TENG exhibits a maximum open-circuit voltage of (280 V), short-circuit current of (20 µA) transfer charge of (120 nC), and power density of (25.2 µW cm-2). Then, this energy is utilized to charge electrical appliances. In addition, the influence of AC/DC EF simulation in wound healing management (vitro L929 cell migration, vivo tissue regeneration) is also investigated by changing the polarity of trans-epithelial potential (TEP) distribution in the wounded area.
RESUMO
Structurally symmetric dyes using functionalized fluorenes and benzotriazole as the main building moieties have been synthesized and found to exhibit efficient dual-state emission (DSE) and interesting two-wavelength or dual amplified spontaneous emission (dual-ASE) behaviors in the solution phase, which may benefit the development of organic gain materials with dual-wavelength amplification.
RESUMO
Electronic devices with multiple features bring in comfort to the way we live. However, repeated use causes physical as well as chemical degradation reducing their lifetime. The self-healing ability is the most crucial property of natural systems for survival in unexpected situations and variable environments. However, this self-repair property is not possessed by the conventional electronic devices designed today. To expand their lifetime and make them reliable by restoring their mechanical, functional, and electrical properties, self-healing materials are a great go-to option to create robust devices. In this review the intriguing self-healing polymers and fascinating mechanism of self-healable energy harvesting devices such as triboelectric nanogenerators (TENG) and storage devices like supercapacitors and batteries from the aspect of electrodes and electrolytes in the past five years are reviewed. The current challenges, strategies, and perspectives for a smart and sustainable future are also discussed.
RESUMO
Hole transport materials (HTMs) with appropriate energy levels and comprehensive passivation effects help to obtain highly efficient and stable perovskite solar cells (PSCs). Electron-deficient character-induced HTMs can generate varying energy level alignments near the HTM/perovskite interface. Herein, we report the synthesis and investigation of two new dipolar HTMs, WWC103 and WWC105, based on 2-(1,1-dicyanomethylene)rhodamine and 4-cynophenylacetonitrile acceptors, enabling high-efficiency mixed-cation mixed-halide perovskite solar cells. Apart from having different acceptors, these HTMs are built on a heterocyclic frame, which can provide passivation effects and improve the morphology of the perovskite layer. As a result, these dopant-free HTM-based solar cells show a high open-circuit voltage and good power conversion efficiency. Among both, the solar cell based on the HTM with 2-(1,1-dicyanomethylene)rhodamine exhibits a high open-circuit voltage of 1.09 V with a champion power conversion efficiency of over 20.51%. The improved performance of WWC103 over WWC105 (19.74%) is attributed to the new acceptor, which, in addition to providing good energy-level alignments and hole mobility, also holds the ability to passivate the defects. The findings suggest a new acceptor unit for constructing dopant-free HTMs for efficient PSCs.
RESUMO
Because of their exceptional physical and thermal properties, cellulose nanocrystals (CNCs) are a highly promising bio-based material for reinforcing fillers. Studies have revealed that some functional groups from CNCs can be used as a capping ligand to coordinate with metal nanoparticles or semiconductor quantum dots during the fabrication of novel complex materials. Therefore, through CNCs ligand encapsulation and electrospinning, perovskite-NC-embedded nanofibers with exceptional optical and thermal stability are demonstrated. The results indicate that, after continuous irradiation or heat cycling, the relative photoluminescence (PL) emission intensity of the CNCs-capped perovskite-NC-embedded nanofibers is maintained at ≈90%. However, the relative PL emission intensity of both ligand-free and long-alkyl-ligand-doped perovskite-NC-embedded nanofibers decrease to almost 0%. These results are attributable to the formation of specific clusters of perovskite NCs along with the CNCs structure and thermal property improvement of polymers. CNCs-doped luminous complex materials offer a promising avenue for stability-demanding optoelectronic devices and other novel optical applications.
RESUMO
The characteristics and application of nonlinear absorption from CsPbBr3 QDs film with the ligand-modified strategy have been investigated in this work. By means of a near-infrared fs Ti:sapphire laser as a light source, the up-conversion emission of CsPbBr3 QDs film of around 518 nm revealed a quadratic increase with the pump intensity. Through the temperature-dependent up-conversion emission, we obtained the binding energy and longitudinal optical (LO) phonon energy of CsPbBr3 QDs film of around 58.1 and 61.2 meV, respectively. Due to more active thermal coupling between the excited electron or hot phonon effect, the photon decay trace under two-photon excitation was prolonged at higher temperatures. The ligand-modified CsPbBr3 QDs film exhibits a relatively large TPA coefficient of around 28.6 cm/GW by the open aperture Z-scan measurement, and it has been demonstrated as a promising nonlinear medium to obtain the pulsewidth of ultrafast lasers.
RESUMO
A microcavity laser with linear polarization finds practical applications in metrology and biomedical imaging. Through a pulsed light excitation, the polarization characteristics of amplified spontaneous emissions (ASEs) from ten-period ZnO/Zn0.8Mg0.2O multiple quantum wells (MQWs) on a C-Plane sapphire substrate were investigated at room temperature. Unlike unpolarized spontaneous emissions, with 35 meV of energy differences between the C and AB bands, the ASE of MQWs revealed transverse-electric (TE) polarization under the edge emission configuration. The excited ASE from the surface normal of the polar ZnO/Zn0.8Mg0.2O MQWs with hexagonal symmetry revealed linear polarization under the pump of the stripe line through the focusing by using a cylindrical lens. The polarization direction of ASE is independent of the pump polarization but always perpendicular to the pump stripe, even if the cylindrical lens is rotated 90 degrees because of the gain-guiding effect.
RESUMO
Stretchable microcavity lasers reveal potential application in flexible displays, biomedicine, and wearable devices in the near future. In this work, we investigated the characteristic of amplified spontaneous emission (ASE) from all inorganic CsPbBr3 QDs on a flexible PET substrate with the assistance of biocompatible silk fibroin (SF) film. In comparison with the sample on PET directly, the ASE of all-inorganic perovskite film revealed a lower threshold of 32.7 µJ/cm2, higher slope efficiency, and a larger gain coefficient of around 100.0 cm-1 owing to the better stack and good arrangement of the CsPbBr3 QDs on top of the SF film. For the temperature-dependent ASE measurement, the larger characteristic temperature of around 277 K is obtained from CsPbBr3 QD/SF film, and the emission peak reveals a slight shift with temperature variation, which indicates its temperature-insensitive property. As the curvature of flexible substrate increases under the mechanical bending, the lasing threshold of CsPbBr3 QD/SF film was reduced along with the increase in slope efficiency owing to the enhancement in the index guiding effect.
Assuntos
Fibroínas , Compostos de Cálcio , Fibroínas/química , Óxidos , Seda/química , TitânioRESUMO
Zr-Cu based thin-film metallic glass (TFMG) has good glass-forming ability and the addition of a third element can create a chaotic system capable of inhibiting the nucleation and growth of crystals. This study focused on TFMGs made with Zr, Cu, and Ti in various compositions deposited via high-impulse magnetron sputtering on silicon and 304 stainless-steel substrates. Detailed analysis was performed on the microstructure and surface characteristics of the resulting coatings. Transmission electron microscopy revealed that the multilayer structure changed to a nanocrystalline structure similar to an amorphous coating. The excellent hydrophobicity of Zr-Cu-Ti TFMGs can be attributed to their ultra-smooth surface without any grain boundaries. The excellent antimicrobial effects can be attributed to a hydrophobic surface resisting cell adhesion and the presence of copper ions, which are lethal to microbes.
RESUMO
The Conducting of polymers belongs to the class of polymers exhibiting excellence in electrical performances because of their intrinsic delocalized π- electrons and their tunability ranges from semi-conductive to metallic conductive regime. Conducting polymers and their composites serve greater functionality in the application of strain and pressure sensors, especially in yielding a better figure of merits, such as improved sensitivity, sensing range, durability, and mechanical robustness. The electrospinning process allows the formation of micro to nano-dimensional fibers with solution-processing attributes and offers an exciting aspect ratio by forming ultra-long fibrous structures. This review comprehensively covers the fundamentals of conducting polymers, sensor fabrication, working modes, and recent trends in achieving the sensitivity, wide-sensing range, reduced hysteresis, and durability of thin film, porous, and nanofibrous sensors. Furthermore, nanofiber and textile-based sensory device importance and its growth towards futuristic wearable electronics in a technological era was systematically reviewed to overcome the existing challenges.
RESUMO
Several biological membranes have been served as scattering materials of random lasers, but few of them include natural photonic crystals. Here, we propose and demonstrate a facile approach to fabricating high-performance biological photonic crystal random lasers, which is cost-effective and reproducible for mass production. As a benchmark, optical and lasing properties of dye-coated Lepidoptera wings, including Papilio ulysses butterfly and Chrysiridia rhipheus moth, are characterized and show a stable laser emission with a superior threshold of 0.016 mJ/cm2, as compared to previous studies. To deploy the proposed devices in practical implementation, we have applied the as-fabricated biological devices to bright speckle-free imaging applications, which is a more sustainable and more accessible imaging strategy.
Assuntos
Borboletas/anatomia & histologia , Mariposas/anatomia & histologia , Asas de Animais/diagnóstico por imagem , Animais , Desenho Assistido por Computador , Cristalização/métodos , Cristalografia/métodos , Lasers , Luz , Microscopia Eletrônica de Varredura , Modelos Biológicos , Óptica e Fotônica , Espalhamento de Radiação , Propriedades de SuperfícieRESUMO
Random lasing from CsPbBr3 quantum dots (QDs) prepared by the hot injection method under ambient conditions has been investigated. The lasing characteristics and performance were related to the thickness and aggregation of the QDs film on a glass substrate. The perovskite emitted linear polarized ASE from the edge of the prepared sample as pump energy above a certain threshold, owing to the gain guiding effect. In comparison to the Q-switched Nd:YAG laser, the prepared perovskite random lasers produced a speckle reduced image with a lower contrast of around 0.051. Through temperature-dependent measurements under a surface normal emission configuration, the photon energy of ASE revealed a red shift as the temperature increased and showed a larger characteristic temperature of around 230 K. This result illustrates that the perovskite prepared under ambient conditions can be a promising material for a microcavity laser in the near future.
RESUMO
Random lasers had been made by some biomaterials as light scattering materials, but natural photonic crystals have been rarely reported as scattering materials. Here we demonstrate the ability of natural photonic crystals to drive laser actions by sandwiched the feathers of the Turquoise-Fronted Amazon parrot and dye between two plastic films. Parrot feathers comprise abundant photonic crystals, and different color feathers compose of different ratios of the photonic crystal, which directly affect the feather reflectance. In this study, the multi-reflection scattering that occurred at the interface between the photonic crystal and gain media efficiently reduce the threshold; therefore, the more photonic crystal constitutes in the feathers; the lower threshold can be obtained. The random lasers can be easily made by the integration of bird feather photonic crystals and dye with a simple and sustainable manufacturing approach.
Assuntos
Plumas/anatomia & histologia , Lasers , Óptica e Fotônica , Papagaios/anatomia & histologia , Animais , Cristalização , Plumas/ultraestrutura , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Microbial fuel cell (MFC) is a promising technology that utilizes exoelectrogens cultivated in the form of biofilm to generate power from various types of sources supplied. A metal-reducing pathway is utilized by these organisms to transfer electrons obtained from the metabolism of substrate from anaerobic respiration extracellularly. A widely established model organism that is capable of extracellular electron transfer (EET) is Shewanella oneidensis. This review highlights the strategies used in the transformation of S. oneidensis and the recent development of MFC in terms of intervention through genetic modifications. S. oneidensis was genetically engineered for several aims including the study on the underlying mechanisms of EET, and the enhancement of power generation and wastewater treating potential when used in an MFC. Through engineering S. oneidensis, genes responsible for EET are identified and strategies on enhancing the EET efficiency are studied. Overexpressing genes related to EET to enhance biofilm formation, mediator biosynthesis, and respiration appears as one of the common approaches.
Assuntos
Fontes de Energia Bioelétrica/microbiologia , Biofilmes/crescimento & desenvolvimento , Microrganismos Geneticamente Modificados/fisiologia , Shewanella/fisiologia , Transporte de Elétrons , Consumo de Oxigênio/fisiologiaRESUMO
Plasmonic random lasers have been demonstrated in combining dye-doped cholesteric liquid crystals (DD-CLCs) and silver nanoparticles (AgNPs). The DD-CLC laser reveals the lowest threshold and highest slope efficiency through the localized surface plasmon resonance of AgNPs with the best coupling of the emission spectrum of lasing dye and resonance of electron oscillation on the metal surface. Thermal control of the DD-CLC lasers has been achieved to simultaneously shift the long- and short-edge lasing peaks. By the α-stable analysis, the DD-CLC random laser (RL) reveals heavy tail distribution with relatively low αâ¼1.06 to show the Lévy behavior. Owing to its low spatial coherence, the DD-CLC RL has been demonstrated to produce a speckle-reduced image with a lower contrast of about 0.04.
RESUMO
Based on cascaded Raman scattering, near-infrared (NIR) noise-like pulses (NLPs) were successfully demonstrated using a Yb-doped fiber amplifier system. Through a nonlinear fiber amplifier using a germanium-zirconia-silica Yb3+-doped single mode fiber as a gain fiber, the fourth-order Stokes wave (4th-SW) can be excited to extend the emission peak of approximately 1.2-µm and a 3-dB bandwidth of approximately 130 nm. To further shift the wavelength more efficiently toward 1.3 µm, filtered NLPs with an emission peak at 1075 nm were adopted as seeded pulses to excite the fifth-order Stokes wave (5th-SW) because of the better conversion efficiency of stimulated Raman scattering without gain competition with Yb-doped fiber. The generated NIR NLPs were shown to be an excellent light source for the photoluminescence emission from three photon absorption of perovskite to illustrate the red shift of the emission peak owing to the reabsorption effect.
RESUMO
In this work, SiO2@α-Fe2O3 core-shell decorated RGO nanocomposites were prepared via a simple sol-gel method. The nanocomposites were prepared with different weight percentages (10, 30, and 50 wt %) of the SiO2@α-Fe2O3 core-shell on RGO, and the effects on the structural and optical properties were identified. The photocatalytic reduction and oxidation properties of the nanocomposites in the gas phase were assessed through the reduction of CO2 and oxidation of ethanol using in-situ diffuse-reflectance infrared fourier transform spectroscopy (DRIFT). The prepared nanocomposite with (30 wt %) of SiO2@α-Fe2O3 showed superior photocatalytic activity for the gas phase reduction of CO2 and oxidation of ethanol. Enhancement in the activity was also perceived when the light irradiation was coupled with thermal treatment. The DRIFT results for the nanocomposites indicate the active chemical conversion kinetics of the redox catalytic effect in the reduction of CO2 and oxidation of ethanol. Further, the evaluation of photoelectrochemical CO2 reduction performance of nanocomposites was acquired by linear sweep voltammetry (LSV), and the results showed a significant improvement in the onset-potential (-0.58 V) for the RGO (30 wt %)-SiO2@α-Fe2O3 nanocomposite.
RESUMO
The resonant energy transfer enhancement from a plasmonic random laser (PRL) has been investigated by means of a dye-covered PVA film with embedded silver nanoplates (DC-PVA/AgNPs). Different sizes and morphologies of AgNPs were adopted to shift the localized surface plasmon resonance (LSPR) and intensify recurrent light scattering between the AgNPs. For better overlap between surface plasmon resonance and the photoluminescence of fluorescent molecules with appropriately-sized silver nanoprisms, the slope efficiency of the PRL was greatly enhanced and the lasing threshold was obviously reduced. In addition, the photon lifetime for the DC-PVA/AgNPs film reveals an apparent decline around 1.39 ns owing to better coupling with LSPR. The stronger light scattering of samples with bigger-sized silver nanoprisms has been demonstrated by coherent back scattering measurements, which reveals a smaller transport mean free path around 3.3 µm. With α-stable analysis, it has been successfully demonstrated that the tail exponent α can be regarded as an identifier of the threshold of random lasing.
RESUMO
Random lasers (RLs) are convenient, tunable, and widely applicable. However, the influence of fluorescence lifetime on the scattering and nanofiber distribution of nanofibers with various shapes of silver nanoparticles (Ag NPs) embedded within is unclear. We prepared poly(vinyl alcohol) (PVA) nanofibers with Ag NPs through electrospinning (ES) and pyrromethene 597 dye doping. We determined the influences of the particles on scattering enhancement and localized surface plasmon resonance (LSPR) in RLs. The distinct scattering rates and LSPR can be used to control optical properties for sensing devices and other applications. Compared with traditional films, the threshold of the nanofibers with Ag NPs is 35% lower. In addition to improved matching between the LSPR and emission spectra, enhanced coupling of the electric field with nonradiative energy amplifies the radiative emission. Furthermore, the luminescence lifetime shortened by increasing the scattering rate. An excessive scattering rate may accelerate radiative recombination and convert some recombination into nonradiative recombination to produce a more sensitive device. Finally, we applied the prepared nanofibers to a backlight display and fabricated a white-light-emitting diode (LED) with a distinct thickness of nanofibers. The fabricated device is suitable for application in other LEDs and RL devices.
RESUMO
Saturation and beating of coherent acoustic phonon (CAP) oscillations were observed and attributed to the screening of a built-in electric field with increasing pump power using degenerate pump-probe measurements near the exciton resonance of polar ZnO/Zn0.8Mg0.2O multiple quantum wells (MQWs). After purifying the CAP signals by using an empirical mode decomposition, we found not only that the CAP amplitude follows the trend of the band gap renormalization (BGR) and shows saturation at high pump power, but also that the CAP oscillation period coincides with that of the MQWs, consistent with the XRD and TEM results. An additional low-frequency oscillation modifying the CAP signal is revealed due to the negative change in refractive index caused by BGR as the pump power increases.