RESUMO
Background: Prediabetes is associated with an increased risk of cardiovascular diseases and all-cause mortality. Rare research in China has evaluated the prevalence of prediabetes among children and adolescents using the HbA1c criterion or the combined FPG-or-HbA1c diagnostic criterion, and researchers paid no attention to the distributions of blood glucose in Shenzhen, especially for juveniles. Methods: We conducted a school-based cross-sectional study based on the first-year students from 17 primary, middle, and high schools. Prediabetes was defined as FPG of 5.6-6.9 mmol/L or HbA1c of 5.7%-6.4%. The crude and standardized prevalence of prediabetes with 95% confidence interval (95% CI) was estimated. Results: A total of 7519 participants, aged 6 to 17 years, were included. For all subjects, the crude prevalence (95% CI) of prediabetes was 1.49% (1.21-1.77), 8.72% (8.08-9.36), and 9.80% (9.13-10.47) by the FPG-only, HbA1c-only, and FPG-or-HbA1c criteria, respectively. Based on the 2010 Shenzhen census population, the standardized prevalence was 1.56% (males 1.85%, females 1.19%), 11.05% (males 11.47%, females 10.53%), and 12.19% (males 13.01%, females 11.15%) by the corresponding criteria. The proportion of prediabetes was higher for males than females, and the prevalence decreased with grade for males but increased for females. The association of BMI and prediabetes was U-shaped curve, indicating higher rates of prediabetes for underweight and obesity people. Conclusion: The blood glucose status of children and adolescents in Shenzhen is worrisome, and the early detection and management of prediabetes are imperative.
Assuntos
Estado Pré-Diabético , Masculino , Criança , Feminino , Humanos , Adolescente , Estado Pré-Diabético/diagnóstico , Estado Pré-Diabético/epidemiologia , Glicemia , Hemoglobinas Glicadas , Prevalência , Estudos Transversais , Fatores de Risco , Jejum , China/epidemiologiaRESUMO
Three-dimensional (3D) graphene architectures with well-controlled structure and excellent physiochemical properties have attracted considerable interest due to their potential applications in flexible electronic devices. However, the majority of the existing 3D graphene still encounters several drawbacks such as brittleness, non-uniform building units, and limited scale (millimeter or even micrometer), which severely limits its practical applications. Herein, we demonstrate a new scalable technique for the preparation of thin-layer graphite foam (GF) with controllable densities (27.2-69.2 mg cm-3) by carbonization of polyacrylonitrile using a template-directed thermal annealing approach. By integrating the GF with poly(dimethylsiloxane) (PDMS), macroscopic porous GF@PDMS with variable thin-layer GF contents ranging from 15.9 to 31.7% was further fabricated. Owing to the robust interconnected porous network of the GF and the synergistic effect between GF and PDMS, GF@PDMS with a 15.9% thin-layer GF content exhibited an impressive 254% increase in compressive strength over the bare GF. In addition, such 15.9% GF@PDMS can totally recover after the first compression cycle at a 95% strain and maintain â¼88% recovery even after 1000 compression cycles at an 80% strain, demonstrating its superior compressibility. Moreover, all of the as-prepared GF@PDMS samples possessed high electrical conductivity (up to 34.3 S m-1), relatively low thermal conductivity (0.062-0.076 W m-1 K-1), and excellent electromagnetic interference shielding effectiveness (up to 36.1 dB) over a broad frequency range of 8.2-18 GHz, indicating their great potential as promising candidates for high-performance electromagnetic wave absorption in flexible electronic devices.
RESUMO
Hexagonal boron nitride (h-BN) is an ideal substrate for two-dimensional (2D) materials because of its unique electrically insulating nature, atomic smoothness and low density of dangling bonds. Although mechanical exfoliation from bulk crystals produces the most pristine flakes, scalable fabrication of devices is still dependent on other more direct synthetic routes. To date, the most utilized method to synthesize large-area h-BN films is by chemical vapor deposition (CVD) using catalytic metal substrates. However, a major drawback for such synthetic films is the manifestation of thermally-induced wrinkles, which severely disrupt the smoothness of the h-BN films. Here, we provide a detailed characterization study of the microstructure of h-BN wrinkles and demonstrate an effective post-synthesis smoothening route by thermal annealing in air. The smoothened h-BN film showed an improved surface smoothness by up to 66% and resulted in a much cleaner surface due to the elimination of polymer residues with no substantial oxidative damage to the film. The unwrinkling effect is attributed to the hydroxylation of the h-BN film as well as the substrate surface, resulting in a reduction in adhesion energy at the interface. Dehydroxylation occurs over time under ambient conditions at room temperature and the smoothened film can be restored back with the intrinsic properties of h-BN. This work provides an efficient route to achieve smoother h-BN films, which are beneficial for high-performance 2D heterostructure devices.
RESUMO
Vertically aligned carbon nanotube (CNT) arrays have been recognized as promising cushion materials because of their superior thermal stability, remarkable compressibility, and viscoelastic characteristics. However, most of the previously reported CNT arrays still suffer from permanent shape deformation at only moderate compressive strains, which considerably restricts their practical applications. Here, we demonstrate a facile strategy of fabricating supercompressible coaxial CNT@graphene (CNT@Gr) arrays by using a two-step route involving encapsulating polymer layers onto plastic CNT arrays and subsequent annealing processes. Notably, the resulting CNT@Gr arrays are able to almost completely recover from compression at a strain of up to 80% and retain â¼80% recovery even after 1000 compression cycles at a 60% strain, demonstrating their excellent compressibility. Furthermore, they possess outstanding strain- and frequency-dependent viscoelastic responses, with storage modulus and damping ratio of up to â¼6.5 MPa and â¼0.19, respectively, which are nearly constant over an exceptionally broad temperature range of -100 to 500 °C in ambient air. These supercompressibility and temperature-invariant viscoelasticity together with facile fabrication process of the CNT@Gr arrays enable their promising multifunctional applications such as energy absorbers, mechanical sensors, and heat exchangers, even in extreme environments.
RESUMO
Although two-dimensional boron (B) has attracted much attention in electronics and optoelectronics due to its unique physical and chemical properties, in-depth investigations and applications have been limited by the current synthesis techniques. Herein, we demonstrate that high-quality few-layer B sheets can be prepared in large quantities by sonication-assisted liquid-phase exfoliation. By simply varying the exfoliating solvent types and centrifugation speeds, the lateral size and thickness of the exfoliated B sheets can be controllably tuned. Additionally, the exfoliated few-layer B sheets exhibit excellent stability and outstanding dispersion in organic solvents without aggregates for more than 50 days under ambient conditions, owing to the presence of a solvent residue shell on the B sheet surface that provides excellent protection against air oxidation. Moreover, we also demonstrate the use of the exfoliated few-layer B sheets for high-performance supercapacitor electrode materials. This as-prepared device exhibits impressive electrochemical performance with a wide potential window of up to 3.0 V, excellent energy density as high as 46.1 Wh/kg at a power density of 478.5 W/kg, and excellent cycling stability with 88.7% retention of the initial specific capacitance after 6000 cycles. This current work not only demonstrates an effective strategy for the synthesis of the few-layer B sheets in a controlled manner but also makes the resulting materials promising for next-generation optoelectronics and energy storage applications.
RESUMO
Poly(vinyl alcohol) (PVA) hydrogels with tissue-like viscoelasticity, excellent biocompatibility, and high hydrophilicity have been considered as promising cartilage replacement materials. However, lack of sufficient mechanical properties is a critical barrier to their use as load-bearing cartilage substitutes. Herein, we report hydroxylated boron nitride nanosheets (OH-BNNS)/PVA interpenetrating hydrogels by cyclically freezing/thawing the aqueous mixture of PVA and highly hydrophilic OH-BNNS (up to 0.6 mg/mL, two times the highest reported so far). Encouragingly, the resulting OH-BNNS/PVA hydrogels exhibit controllable reinforcements in both mechanical and thermal responses by simply varying the OH-BNNS contents. Impressive 45, 43, and 63% increases in compressive, tensile strengths and Young's modulus, respectively, can be obtained even with only 0.12 wt% (OH-BNNS:PVA) OH-BNNS addition. Meanwhile, exciting improvements in the thermal diffusivity (15%) and conductivity (5%) can also be successfully achieved. These enhancements are attributed to the synergistic effect of intrinsic superior properties of the as-prepared OH-BNNS and strong hydrogen bonding interactions between the OH-BNNS and PVA chains. In addition, excellent cytocompatibility of the composite hydrogels was verified by cell proliferation and live/dead viability assays. These biocompatible OH-BNNS/PVA hydrogels are promising in addressing the mechanical failure and locally overheating issues as cartilage substitutes and may also have broad utility for biomedical applications, such as drug delivery, tissue engineering, biosensors, and actuators.
RESUMO
Electronics with multifunctionalities such as transparency, portability, and flexibility are anticipated for future circuitry development. Flexible memory is one of the indispensable elements in a hybrid electronic integrated circuit as the information storage device. Herein, we demonstrate a transparent, flexible, and transferable hexagonal boron nitride (hBN)-based resistive switching memory with indium tin oxide (ITO) and graphene electrodes on soft polydimethylsiloxane (PDMS) substrate. The ITO/hBN/graphene/PDMS memory device not only exhibits excellent performance in terms of optical transmittance (â¼85% in the visible wavelength), ON/OFF ratio (â¼480), retention time (â¼5 × 104 s) but also shows robust flexibility under bending conditions and stable operation on arbitrary substrates. More importantly, direct observation of indium filaments in an ITO/hBN/graphene device is found via ex situ transmission electron microscopy, which provides critical insight on the complex resistive switching mechanisms.
RESUMO
The aim of this study was to determine if assisted hatching (AH) could improve the rates of pregnancy and implantation for both fresh and frozen-thawed embryo transfer cycles. A total of 760 fresh embryo transfer cycles and 200 frozen-thawed embryo transfer cycles were randomly assigned to either the treatment group (AH) or the control group (no AH). Zona thinning by laser was performed just before embryo transfer. In fresh embryo transfer cycles, the AH group and control group results were comparable. There were no significant differences in the rates of positive human chorionic gonadotrophin (HCG; 47.5 versus 48.8%), clinical pregnancy (42.4 versus 42.6%), or implantation (26.3 versus 25.2%) between the two groups. However, in frozen-thawed embryo transfer cycles, the rates of positive HCG (32.0 versus 17.0%), clinical pregnancy (25.0 versus 14.0%) and implantation (16.7 versus 7.3%) were significantly greater in the AH group than in the control group (P <: 0.05). The results of this investigation show that in the fresh embryo transfer cycles, laser-assisted hatching by zona thinning has no impact on the rates of positive HCG, clinical pregnancy and implantation, whereas in frozen-thawed cycles, assisted hatching by zona thinning significantly increases all three of these rates.
Assuntos
Criopreservação , Transferência Embrionária/métodos , Fertilização in vitro , Adulto , Desenvolvimento Embrionário/fisiologia , Feminino , Congelamento , Humanos , Lasers , Masculino , Gravidez , Taxa de Gravidez , Zona Pelúcida/fisiologia , Zona Pelúcida/efeitos da radiaçãoRESUMO
OBJECTIVE: To investigate the effects of human chorionic gonadotropin (hCG) in culture medium on the in vitro maturation (IVM) and subsequent developmental potential of human immature oocytes. DESIGN: Prospective, randomized study. SETTING: Reproductive Medicine Center, First Affiliated Hospital of Wenzhou Medical College, People's Republic of China. PATIENT(S): 62 women with polycystic ovary syndrome (PCOS) undergoing IVM treatment. INTERVENTION(S): Immature oocytes were retrieved from unstimulated ovaries of women with PCOS. We tried three different culture systems in this experiment. In group A, oocytes were cultured in the medium containing M199 + 20% fetal bovine serum (FBS) + 75 mIU/mL recombinant follicle-stimulating hormone (FSH) + 0.5 IU/mL recombinant hCG. In group B, oocytes were cultured in hCG-free IVM medium (M199 + 20% FBS + 75 mIU/mL recombinant FSH) for 10 hours, then transferred to the same medium as used for group A. In group C, oocytes were cultured only in hCG-free IVM medium. After the oocytes had matured in vitro, fertilization and embryo transfer were performed. MAIN OUTCOME MEASURE(S): Rates of maturation, fertilization, cleavage, implantation, clinical pregnancy, miscarriage, and live birth. RESULT(S): For groups A, B, and C, the maturation rates at 32 and 48 hours were 46.02% and 69.25%; 43.72% and 64.51%; and 51.87% and 67.51%, respectively. Relatively satisfactory clinical results and implantation rates were obtained in all three groups. No statistically significant differences among groups A, B, and C were found in the rates of maturation, fertilization, cleavage, implantation, clinical pregnancy, miscarriage, or live birth. CONCLUSION(S): The results of our study indicated that the addition of hCG to in vitro culture medium did not improve the maturation rate or development potential of immature oocytes. For the IVM and development of immature oocytes from women with PCOS, hCG appears to be unnecessary.