Halogen-bonded charge-transfer co-crystal scintillators for high-resolution X-ray imaging.

The development of high-quality organic scintillators encounters challenges primarily associated with the weak X-ray absorption ability resulting from the presence of low atomic number elements. An effective strategy involves the incorporation of halogen-containing molecules into the system through co-crystal engineering. Herein, we synthesized a highly fluorescent dye, 2,5-di(4-pyridyl)thiazolo[5,4-d]thiazole (Py2TTz), with a fluorescence quantum yield of 12.09%. Subsequently, Py2TTz was co-crystallized with 1,4-diiodotetrafluorobenzene (I2F4B) and 1,3,5-trifluoro-2,4,6-triiodobenzene (I3F3B) obtaining Py2TTz-I2F4 and Py2TTz-I3F3. Among them, Py2TTz-I2F4 exhibited exceptional scintillation properties, including an ultrafast decay time (1.426 ns), a significant radiation luminescence intensity (146% higher than Bi3Ge4O12), and a low detection limit (70.49 nGy s-1), equivalent to 1/78th of the detection limit for medical applications (5.5 µGy s-1). This outstanding scintillation performance can be attributed to the formation of halogen-bonding between I2F4B and Py2TTz. Theoretical calculations and single-crystal structures demonstrate the formation of halogen-bond-induced rather than π-π-induced charge-transfer cocrystals, which not only enhances the X-ray absorption ability and material conductivity under X-ray exposure, but also constrains molecular vibration and rotation, and thereby reducing non-radiative transition rate and sharply increasing its fluorescence quantum yields. Based on this, the flexible X-ray film prepared based on Py2TTz-I2F4 achieved an ultrahigh spatial resolution of 26.8 lp per mm, underscoring the superiority of this strategy in developing high-performance organic scintillators.

Correction: Halogen-bonded charge-transfer co-crystal scintillators for high-resolution X-ray imaging.

[This corrects the article DOI: 10.1039/D4SC00735B.].

Mechanochemical Synthesis of Cuprous Complexes for X-ray Scintillation and Imaging.

Cuprous complex scintillators show promise for X-ray detection with abundant raw materials, diverse luminescent mechanisms, and adjustable structures. However, their synthesis typically requires a significant amount of organic solvents, which conflict with green chemistry principles. Herein, we present the synthesis of two high-performance cuprous complex scintillators using a simple mechanochemical method for the first time, namely [CuI(PPh3)2R] (R = 4-phenylpyridine hydroiodide (PH, Cu-1) and 4-(4-bromophenyl)pyridine hydroiodide (PH-Br, Cu-2). Both materials demonstrated remarkable scintillation performances, exhibiting radioluminescence (RL) intensities 1.52 times (Cu-1) and 2.52 times (Cu-2) greater than those of Bi4Ge3O12 (BGO), respectively. Compared to Cu-1, the enhanced RL performance of Cu-2 can be ascribed to its elevated quantum yield of 51.54%, significantly surpassing that of Cu-1 at 37.75%. This excellent luminescent performance is derived from the introduction of PH-Br, providing a more diverse array of intermolecular interactions that effectively constrain molecular vibration and rotation, further suppressing the nonradiative transition process. Furthermore, Cu-2 powder can be prepared into scintillator film with excellent X-ray imaging capabilities. This work establishes a pathway for the rapid, eco-friendly, and cost-effective synthesis of high-performance cuprous complex scintillators.

Polyoxometalate/s-triazine hybrid heterostructures with ultrafast photochromic properties.

As an emerging class of hybrid complexes, donor-acceptor (D-A) hybrid heterostructures, which combine the advantages of both organic and inorganic photoactive components, provide excellent platforms for the fabrication of photochromic materials with enhanced photo-responsive performances. Herein, four novel hybrid heterostructures, namely H3TPT·(PW12O40)·2NMP (1), (H1.5TPT)2·(PW12O40) (2), (H3TPT)2·(SiW12O40)·2Cl·2MeCN (3), and H3TPT·(HPMo12O40)·Cl·3NMP (4) (TPT is tri(4-pyridyl)-s-triazine, NMP is N-methylpyrrolidone), have been synthesized and characterized. Benefitting from the strong interactions (anion-π interactions) and matching electron energy levels between the donors and acceptors, some of them exhibited ultrafast photochromic behaviour even up to 1 second. Furthermore, based on experimental and theoretical calculations, the plausible PIET process and structure-activity relationship have been discussed in detail.

Synthesis, Characterization, and Properties of Sila-Annulated Phenanthrene Imides.

A series of sila-annulated phenanthrene imides were synthesized through a three-step synthetic route, which represent a hybrid class of biphenyl-based π-conjugated molecules incorporating an imide unit and silole. A comprehensive investigation of their structural, photophysical, and electronic properties was studied by experiment and theoretical calculations. Notably, sila-annulated phenanthrene imides with significant aggregation-induced emission (AIE) properties were observed.

Naphthalenediimide/Iodobismuthate Hybrid Heterostructures: Water Resistance and Long-Lived Charge-Separated States.

Organic-inorganic hybrid iodobismuthate perovskites have become promising semiconductive materials for their environmentally friendly and light-harvesting characteristics. However, their low-dimensional bismuth-iodide skeletons result in poor charge-separation efficiency, limiting their application in optoelectronic devices. To address this issue, the donor-acceptor (D-A) heterostructures have been introduced to the iodobismuthate hybrid materials by incorporating an electron-deficient N,N'-bis(4-aminoethyl)-1,4,5,8-naphthalene diimide (NDIEA) as the electron acceptor and organic counterpart. Five naphthalenediimide/iodobismuthate hybrid heterostructures, named (H2NDIEA)1.5·Bi2I9·3DMF (1), H2NDIEA·[Bi2I8(DMF)2]·2DMF (2), (H2NDIEA)2·Bi4I16·2H2O·4MeOH (3), (H2NDIEA)2·Bi4I16·8H2O (4), and [(H2NDIEA)2·Bi6I22]n·4nH2O (5) (DMF = N,N-dimethylformamide), were synthesized. Their crystal structures, water stabilities, charge-separated behaviors, and electrical properties have been studied through experimental and computational investigations. The results revealed that hybrids 3-5 exhibited high water resistance attributed to their tightly packed structures and robust H-bonds between solvent molecules and organic-inorganic supramolecular frameworks. Density functional theory calculations confirmed characteristic type-IIa band alignments of all the five hybrids, facilitating to the photoinduced charge separation. Moreover, the closer contact caused by the strong anion-π interactions between electron donors and acceptors in hybrid 5 leads to the long-lived charge-separated states and improved electrical properties compared to the other hybrids.

Novel Semiconductive Ternary Hybrid Heterostructures for Artificial Optoelectronic Synapses.

Synaptic devices that mimic biological synapses are considered as promising candidates for brain-inspired devices, offering the functionalities in neuromorphic computing. However, modulation of emerging optoelectronic synaptic devices has rarely been reported. Herein, a semiconductive ternary hybrid heterostructure is prepared with a D-D'-A configuration by introducing polyoxometalate (POM) as an additional electroactive donor (D') into a metalloviologen-based D-A framework. The obtained material features an unprecedented porous 8-connected bcu-net that accommodates nanoscale [α-SiW12 O40 ]4- counterions, displaying uncommon optoelectronic responses. Besides, the fabricated synaptic device based on this material can achieve dual-modulation of synaptic plasticity due to the synergetic effect of electron reservoir POM and photoinduced electron transfer. And it can successfully simulate learning and memory processes similar to those in biological systems. The result provides a facile and effective strategy to customize multi-modality artificial synapses in the field of crystal engineering, which opens a new direction for developing high-performance neuromorphic devices.

Three Semiconductive 1D Naphthalene Diimide/Iodoplumbate Perovskites with High Moisture Tolerance and Long-Lived Charge Separation States.

Low-dimensional inorganic-organic hybrid perovskites with high moisture tolerance and long-lived charge separation states have captured significant attention in the field of optoelectronic devices. To further achieve the relationship between crystal structures and stability, as well as charge separation behaviors, three one-dimensional hybrid perovskites containing electron-deficient naphthalene diimide ammonium (NDIEA) and electron-rich iodoplumbate chains, [(H2NDIEA)Pb2I6]·2DMF (1), [(H2NDIEA)2Pb5I14·(DMF)2]·4DMF (2), and [(HNDIEA)2Pb2I6]·3H2O (3), were synthesized. Crystal structure determinations revealed various synthesis conditions leading to different stacking modes, especially the inorganic lead iodide fraction, which resulted in different water resistances and charge-separated behaviors. The comprehensive analysis found that strong intermolecular interactions (anion-π interactions and π-π interactions), and matching energy levels between protonated NDIEA and iodoplumbate chains, can facilitate the generation of long-lived charge separation states and extraordinary moisture stability, even in the water environment. In addition, the conductivity behavior of 3 was also explored in detail.

Guanosine-derived atomically dispersed Cu-N3-C sites for efficient electroreduction of carbon dioxide.

Single-atom copper (Cu) embedded within carbon catalysts have demonstrated significant potential in the electrochemical reduction of carbon dioxide (CO2) into valuable chemicals and fuels. Herein, we develop a straightforward and template-free strategy for synthesizing atomically dispersed CuNC catalysts (CuG) by annealing the self-assembled guanosine. The CuG catalysts display two-dimensional morphology, tunable pore size and large surface areas that can be adjusted by changing carbonization temperature. Spherical aberration-corrected transmission electron microscopy reveals that single-atom Cu are homogeneously dispersed on the surface of carbon nanosheets. The optimum CuG-1000 catalysts achieve a high CO Faradaic efficiency (FEco) up to 99% and a high CO current density of 6.53 mA cm-2 (-0.65 V vs. RHE). Besides, the flow cell test of CuG-1000 shows a high current density up to 25.2 mA cm-2 and the FEco still exceeded 91% after more than 20 h of testing. Specifically, the existence of Cu-N3-C active sites was proved by extended X-ray absorption fine structure (EXAFS). Density functional theory evidences that tricoordinated copper with N can largely regulate the adsorption and desorption of key intermediates by transferring electrons to *COOH through Cu atoms, thereby improving selectivity toward CO. This work demonstrates the active origin of CuNC catalysts in CO2 electroreduction and offers a blueprint to construct atomically dispersed transition site catalysts by supramolecular self-assembly strategy.

Intramolecular Energy and Solvent-Dependent Chirality Transfer within a BINOL-Perylene Hetero-Cyclophane.

Multichromophoric macrocycles and cyclophanes are important supramolecular architectures for the elucidation of interchromophoric interactions originating from precise spatial organization. Herein, by combining an axially chiral binaphthol bisimide (BBI) and a bay-substituted conformationally labile twisted perylene bisimide (PBI) within a cyclophane of well-defined geometry, we report a chiral PBI hetero-cyclophane (BBI-PBI) that shows intramolecular energy and solvent-regulated chirality transfer from the BBI to the PBI subunit. Excellent spectral overlap and spatial arrangement of BBI and PBI lead to efficient excitation energy transfer and subsequent PBI emission with high quantum yield (80-98 %) in various solvents. In contrast, chirality transfer is strongly dependent on the respective solvent as revealed by circular dichroism (CD) spectroscopy. The combination of energy and chirality transfer affords a bright red circularly polarized luminescence (CPL) from the PBI chromophore by excitation of BBI.

Donor-Acceptor Hybrid Heterostructures: An Emerging Class of Photoactive Materials with Inorganic and Organic Semiconductive Components.

Just as the heterojunctions in physics, donor-acceptor (D-A) heterostructures are an emerging class of photoactive materials fabricated from two semiconductive components at the molecular level. Among them, D-A hybrid heterostructures from organic and inorganic semiconductive components have attracted extensive attention in the past decades due to their combined advantages of high stability for the inorganic semiconductors and modifiability for the organic semiconductors, which are particularly beneficial to efficiently achieve photoinduced charge separation and transfer upon irradiations. In this review, by analogy with the heterojunctions in physics, a definition of the D-A heterostructures and their general design and synthetic strategies are given. Meanwhile, the D-A hybrid heterostructures are focused on and their recent advances in potential applications of photochromism, photomodulated luminescence, and photocatalysis summarized.

A Three-Component Donor-Acceptor Hybrid Framework with Low-Power X-ray-Induced Photochromism.

Donor-acceptor (D-A) hybrid frameworks with visual X-ray photochromism at room temperature are fascinating because of their promising applications as X-ray detectors. Herein, a 3-fold interpenetrated D-A hybrid framework, [Eu(bcbp)1.5(DMF)(H2O)2][Co(CN)6]·4H2O·CH3OH (1), has been obtained by incorporating electron-rich Co(CN)63- into the electron-deficient europium viologen framework, which interestingly exhibits ultraviolet and low-power X-ray dual photochromism with a remarkable color change from brown to green. Experimental and theoretical studies revealed that the X-ray photochromic behavior of hybrid 1 could be attributed to its D-A hybrid structural feature increasing the extent of photoinduced electron transfer and thus photogenerated radical species upon X-ray irradiation. Meanwhile, due to the introduction of emissive lanthanide cations in the D-A system, hybrid 1 exhibits photomodulated luminescence properties.

Enantioselective Recognition of Helicenes by a Tailored Chiral Benzo[ghi]perylene Trisimide π-Scaffold.

Enantioselective molecular recognition of chiral molecules that lack specific interaction sites for hydrogen bonding or Lewis acid-base interactions remains challenging. Here we introduce the concept of tailored chiral π-surfaces toward the maximization of shape complementarity. As we demonstrate for helicenes it is indeed possible by pure van-der-Waals interactions (π-π interactions and CH-π interactions) to accomplish enantioselective binding. This is shown for a novel benzo[ghi]perylene trisimide (BPTI) receptor whose π-scaffold is contorted into a chiral plane by functionalization with 1,1'-bi-2-naphthol (BINOL). Complexation experiments of enantiopure (P)-BPTI with (P)- and (M)-[6]helicene afforded binding constants of 10 700 M-1 and 550 M-1 , respectively, thereby demonstrating the pronounced enantiodifferentiation by the homochiral π-scaffold of the BPTI host. The enantioselective recognition is even observable by the naked eye due to a specific exciplex-type emission originating from the interacting homochiral π-scaffolds of electron-rich [6]helicene and electron-poor BPTI.

Photochromic Polyoxometalate/Perylenediimide Donor-Acceptor Hybrid Crystals with Interesting Luminescent Properties.

The self-assembly of electron-deficient protonated N, N'-dipyridyltetrachloroperylenediimide (4Cl-DPPDI) and electron-rich polyoxometalate acids HnXM12O40 (POMs; X = P or Si; M = W or Mo) resulted in four isomorphous donor-acceptor hybrid crystals 1-4 with segregated POM anions and one-dimensional racemic hydrogen-bonded 4Cl-DPPDI networks as electron-donor and -acceptor components, respectively. Because of the compact contacts between the POM anions and 4Cl-DPPDI tectons induced by anion-π interactions, besides enhanced photochromism, these four unique isostructural hybrids exhibited unusual room-temperature phosphorescence (RTP) emissions. More interestingly, owing to the facial compact contacts of two racemic 4Cl-DPPDI tectons induced by lone pair-π-assisted π-π interactions, they also showed unprecedented photon upconversion by triplet-triplet annihilation (TTA).

Photochromic and Room Temperature Phosphorescent Donor-Acceptor Hybrid Crystals Regulated by Core-Substituted Naphthalenediimides.

Donor-acceptor (D-A) hybrid crystals are an emerging kind of crystalline hybrid material composed of semiconductive inorganic donors and organic acceptors. Except for the intrinsic photochromism, recently we have reported that the anion-π polyoxometalate (POM)/naphthalenediimide (NDI) hybrid crystals could produce an interesting room temperature phosphorescence (RTP) quantum yield up to 7.2%. Herein, we extended into core-substituted NDIs and anticipated the regulation of their photochromic and RTP properties. Thus, two hybrid crystals, namely (H4BDMPy-Br2NDI)·(NMP)4·(HPW12O40) (1) and (H4BDMPy-I2NDI)·(HPW12O40) (2) (H2BDMPy-Br2NDI: N,N'-bis(3,5-dimethylpyrazolyl)-2,6-dibromo-1,4,5,8-naphthalenediimide and H2BDMPy-I2NDI: N,N'-bis(3,5-dimethylpyrazolyl)-2,6-diiodide-1,4,5,8-naphthalenediimide), have been synthesized from phosphotungstic anions (PW12O403-) and Br or I core-substituted NDIs. Compared to the core-unsubstituted analogues (H4BDMPy-NDI)·(NMP)4·(HPW12O40) (3), 2 with photosensitive iodine substituents is more sensitive to light, which can become discolored under natural light. As a result of the heavy-atom effect, hybrid 1 exhibits remarkable RTP with the quantum yield up to 10.2% and a lifetime of 1.14 ms.

Donor-Acceptor Conjugated Heptazine Polymers with Highly Efficient Photocatalytic Degradations towards Tetracyclines.

Photocatalysis is an efficient and green technology in the environmental protection. Due to the high charge separation and transfer, donor-acceptor (D-A) conjugated polymers attract much attention for their photocatalytic degradations towards organic pollutants. Herein, the authors reported three novel D-A conjugated polymers, named as HPBP, HPTP, and HPF, with heptazine moieties as electron acceptors, while biphenyl, terphenyl, or fluorene moieties as electron donors, respectively, which indeed exhibit a highly efficient photocatalytic degradation towards tetracyclines upon the visible-light irradiation. Among them, the photocatalytic performance of HPF is especially noticeable with the degradation rate up to 87% within 30 min, almost 11 times in comparison to those of pristine g-C3 N4 , which is mainly attributed to its high crystallinity and conjugation. For their photocatalytic mechanism, the •O2 - radical anions are regarded as the active species.

Encapsulating third donors into D-A hybrid heterostructures to form three-component charge-transfer complexes for enhanced electrical properties.

D-A hybrid heterostructures are an emerging class of crystalline hybrid materials composed of semiconductive inorganic donors and organic acceptors. However, due to the steric effects of the inorganic coordination sites, it is difficult for the large organic molecules to form compact packing at the molecular level, resulting in the poor efficiency of photoinduced charge transfers. To achieve an effective carrier separation and transfer, herein we incorporated third donors into a copper(I) halide/thiazolo[5,4-d] thiazole D-A heterostructure to construct three novel three-component complexes (Me2-Py2TTz)Cu4I6·(I2) (1), (Me2-Py2TTz)Cu3I5·(pyrene) (2) and (Me2-Py2TTz)Cu3I5·(perylene) (3) (Py2TTz = 2,5-bis(4-pyridyl) thiazolo[5,4-d] thiazole), respectively. Due to the spatial distances as well as the orbital energies between the copper(I) halide and thiazolo[5,4-d] thiazole units bridged by third donors, they are excellent three-component charge-transfer complexes (CTCs) with enhanced electrical properties.

Photochromism and photomagnetism in three cyano-bridged 3d-4f heterobimetallic viologen frameworks.

The incorporation of photochromic moieties into coordination polymers is of particular interest because it can endow them with various switching functions such as electrical conductivity, luminescence, and magnetism. In this context, a viologen ligand as a photochromic moiety was incorporated into 3d-4f heterobimetallic hexacyanoferrates, resulting in three novel 3-D photochromic complexes with different metal cations, namely {[Ln(BCEbpy) M(CN)6 (H2O)4]·2H2O}n (denoted as CoDy, CoEu, and FeDy, Ln = Dy, Eu; M = Fe, Co, H2BCEbpy·2Br = N,N'-bis(carboxymethyl)-4,4'-bipyridinium dibromide). And the photoresponsive mechanism has been well discussed based on the solid UV-vis, IR, ESR, photoluminescence, and magnetism data. Moreover, accompanying the photochromic process, these unique complexes exhibit different photomagnetic behaviors upon UV-vis irradiation at RT because of the different ferromagnetic coupling interactions between photogenerated radicals and lanthanide cations.

Three-component D-A hybrid heterostructures with enhanced photochromic, photomodulated luminescence and selective anion-sensing properties.

As an emerging class of hybrid complexes, donor-acceptor (D-A) hybrid heterostructures with advantages of both photoactive organic and inorganic components have provided an excellent platform for the fabrication of multifunctional photoactive materials. In this context, we have demonstrated three novel host-guest D-A hybrid heterostructures, {[Ln(BCEbpy)(H2O)4][CoIII(CN)6]·4H2O}n (1 (Eu), 2 (Dy), 3 (Sm)), based on the anionic Co(CN)63- and cationic coordination layers assembled from a viologen functionalized tecton and Ln(NO)3. Due to the introduction of an electron donor, CoIII(CN)63-, the unique hybrid exhibits a highly sensitive and reversible photochromic transformation from light-yellow to brown upon UV-Vis irradiation. More interestingly, accompanied with this photochromic process, hybrid 1 simultaneously possesses a photomodulated fluorescence behaviour. In addition, hybrid 1 shows high sensitivity and selectivity towards Cr2O72- anions with a fairly small LOD of ca. 9.6 × 10-6 M.

Impact of diffusion methods and metal cations on photochromic three-component D-A hybrid heterostructures.

D-A hybrid heterostructures are an attractive class of hybrid complexes composed of semiconducting organic and inorganic components, which make them potential candidates for applications in the photoelectric fields, particularly as photochromic materials. Herein, we report that the combination of metal cations (M = Zn2+ or Cd2+), silicomolybdic anions, and N,N-di(4-pyridyl)-1,4,5,8-naphthalene diimide (DPNDI) via two diffusion methods (A and B) led to four three-component D-A hybrid heterostructures with silicomolybdic anions as electron donors, and one-dimensional (1-D) naphthalenediimide coordination networks of different metal cations, [Zn2(DPNDI)2(H2O)4]·(SiMo12O40) (1-A and 1-B) and [Cd2(DPNDI)2(H2O)4]·(SiMo12O40) (2-A and 2-B), as electron acceptors. Although the different diffusion methods, 1-B, 2-A and 2-B, are isostructures with close cell parameters. Due to the different ionic radii and electronegativity of metal cations in isostructural 1-B and 2-B, they exhibit different electron-transfer photochromic behaviors. This study paves a new path for designing novel photochromic materials through such third-component metal cations.