Aggregation-induced emission organic metal halide complex for X-ray scintillation.

The expanding applications of X-ray scintillation across various areas, from healthcare to security detection call for the development of new-generation scintillators that offer enhanced sensitivity, efficiency, and versatility. Here, we report for the first time the use of organic metal halide complexes with aggregation-induced emission (AIE) for X-ray scintillation, which can be facilely synthesized and processed in the solution phase. By reacting an AIE organic molecule, 4-(4-(diphenylamino) phenyl)-1-(propyl)-pyridinium (TPA-PD) with zinc chloride (ZnCl2) in solution at room temperature, an organic metal halide complex, (TPA-PD)2ZnCl2, is produced with a high synthetic yield of 87%. Optical and radioluminescence characterizations find that (TPA-PD)2ZnCl2 exhibits bluish-green photoluminescence and radioluminescence peaked at around 450 nm, with a photoluminescence quantum efficiency (PLQE) of 65%, and an absolute light yield of 13 423 Photon per MeV. Moreover, short photoluminescence and radioluminescence decay lifetimes are recorded at 1.81 ns and 5.24 ns, respectively. For X-ray scintillation, an excellent response dose-response linearity and a low limit of detection of 80.23 nGyair S-1 are obtained for (TPA-PD)2ZnCl2. By taking advantage of the high X-ray absorption of metal halides and fast radioluminescence of AIE molecules, our design of covalently bonded organic metal halide complexes opens up new opportunities for the development of high-performance solution-processable scintillators.

Tethering Three Radical Cascades for Controlled Termination of Radical Alkyne peri-Annulations: Making Phenalenyl Ketones without Oxidants.

Although Bu3Sn-mediated radical alkyne peri-annulations allow access to phenalenyl ring systems, the oxidative termination of these cascades provides only a limited selection of the possible isomeric phenalenone products with product selectivity controlled by the intrinsic properties of the new cyclic systems. In this work, we report an oxidant-free termination strategy that can overcome this limitation and enable selective access to the full set of isomerically functionalized phenalenones. The key to preferential termination is the preinstallation of a "weak link" that undergoes C-O fragmentation in the final cascade step. Breaking a C-O bond is assisted by entropy, gain of conjugation in the product, and release of stabilized radical fragments. This strategy is expanded to radical exo-dig cyclization cascades of oligoalkynes, which provide access to isomeric π-extended phenalenones. Conveniently, these cascades introduce functionalities (i.e., Bu3Sn and iodide moieties) amenable to further cross-coupling reactions. Consequently, a variety of polyaromatic diones, which could serve as phenalenyl-based open-shell precursors, can be synthesized.

Oxa-azabenzobenzocyclooctynes (O-ABCs): heterobiarylcyclooctynes bearing an endocyclic heteroatom.

We report the synthesis of heterobiarylcyclooctynes bearing an endocyclic heteroatom, oxa-azabenzobenzocyclooctynes (O-ABCs). The integration of design strategies for accelerating strain-promoted azide-alkyne cycloadditions results in reactivity with organic azides that surpasses all cyclooctyne reagents reported to date. O-ABCs and related compounds provide insights into the effects of structural modifications on reactivity that can aid in the design of new reagents for click and bioorthogonal chemistry.

Enantiomeric Separation, Absolute Configuration by X-ray Crystallographic Analysis, and Functional Evaluation of Enantiomers of the Dual Ligand, SYA0340 at 5-HT1A and 5-HT7A Receptors.

We have previously identified 5-chloro-2-methyl-2-(3-(4-(pyridin-2-yl)piperazin-1-yl)propyl)-2,3-dihydro-1H-inden-1-one (SYA0340) as a dual 5-HT1A and 5-HT7 receptor ligand, and we posited such ligands might find utility in the treatment of various CNS related illnesses including cognitive and anxiolytic impairments. However, SYA0340 has a chiral center and its enantiomers may confound the readouts for their functional characteristics. Thus, in this study, we resynthesized SYA0340, separated the enantiomers, identified the absolute configurations, and evaluated their binding affinities and functional characteristics at both the 5-HT1A and 5-HT7A receptors. The results of this study show that the (+)-SYA0340-P1 [specific rotation [α] = +18.4 (deg.mL)/(g.dm)] has a binding affinity constant, Ki = 1.73 ± 0.55 nM at 5-HT1AR and Ki = 2.20 ± 0.33 nM at 5-HT7AR and (-)-SYA0340-P2 [specific rotation [α] = -18.2 (deg.mL)/(g.dm)] has Ki = 1.06 ± 0.32 nM (5-HT1AR) and 4.7 ± 1.1 nM (5-HT7AR). Using X-ray crystallographic techniques, the absolute configuration of the P2 isomer was identified as the S-enantiomer and, therefore, the P1 isomer as the R-enantiomer. Functionally, both SYA0340-P1 (EC50 = 1.12 ± 0.41 nM; Emax = 94.6 ± 3.1%) and SYA0340-P2 (EC50 = 2.21 ± 0.59 nM; Emax = 96.8 ± 5.1%) display similar agonist properties at the 5-HT1AR while both enantiomers display antagonist properties at the 5-HT7AR with P1 (IC50 = 32.1 ± 9.2 nM) displaying over 8 times greater potency as P2 (IC50 = 277 ± 46 nM). Thus, based on the functional evaluation results, SYA0340-P1 is considered as the eutomer of the pair of enantiomers of SYA0340. It is expected that these enantiomers will serve as new pharmacological probes for the 5-HT1A and 5-HT7A receptors.

Photochemistry and Photophysics of Cholesta-5,7,9(11)-trien-3ß-ol in Ethanol.

Cholesta-5,7,9(11)-trien-3ß-ol (9,11-dehydroprovitamin D3, CTL) is used as a fluorescent probe to track the presence and migration of cholesterol in vivo. We recently described the photochemistry and photophysics of CTL in degassed and air-saturated tetrahydrofuran (THF) solution, an aprotic solvent. The zwitterionic nature of the singlet excited state, 1CTL* is revealed in ethanol, a protic solvent. In ethanol, the products observed in THF are accompanied by ether photoadducts and by photoreduction of the triene moiety to four dienes, including provitamin D3. The major diene retains the conjugated s-trans-diene chromophore and the minor is unconjugated, involving 1,4-addition of H at the 7 and 11 positions. In the presence of air, peroxide formation is a major reaction channel as in THF. X-ray crystallography confirmed the identification of two of the new diene products as well as of a peroxide rearrangement product.

One-dimensional organic metal halide nanoribbons with dual emission.

Organic metal halide hybrids with low-dimensional structures at the molecular level have received great attention recently for their exceptional structural tunability and unique photophysical properties. Here we report for the first time the synthesis and characterization of a one-dimensional (1D) organic metal halide hybrid, which contains metal halide nanoribbons with a width of three octahedral units. It is found that this material with a chemical formula C8H28N5Pb3Cl11 shows a dual emission with a photoluminescence quantum efficiency (PLQE) of around 25%. Photophysical studies and density functional theory (DFT) calculations suggest the coexisting of delocalized free excitons and localized self-trapped excitons in metal halide nanoribbons leading to the dual emission.

Molecular Sensitization Enabled High Performance Organic Metal Halide Hybrid Scintillator.

Scintillators, one of the essential components in medical imaging and security checking devices, rely heavily on rare-earth-containing inorganic materials. Here, a new type of organic-inorganic hybrid scintillators containing earth abundant elements that can be prepared via low-temperature processes is reported. With room temperature co-crystallization of an aggregation-induced emission (AIE) organic halide, 4-(4-(diphenylamino) phenyl)-1-(propyl)-pyrindin-1ium bromide (TPA-PBr), and a metal halide, zinc bromide (ZnBr2 ), a zero-dimensional (0D) organic metal halide hybrid (TPA-P)2 ZnBr4 with a yellowish-green emission peaked at 550 nm has been developed. In this hybrid material, dramatically enhanced X-ray scintillation of TPA-P+ is achieved via the sensitization by ZnBr4 2- . The absolute light yield (14,700 ± 800 Photons/MeV) of (TPA-P)2 ZnBr4 is found to be higher than that of anthracene (≈13,500 Photons/MeV), a well-known organic scintillator, while its X-ray absorption is comparable to those of inorganic scintillators. With TPA-P+ as an emitting center, short photoluminescence and radioluminescence decay lifetimes of 3.56 and 9.96 ns have been achieved. Taking the advantages of high X-ray absorption of metal halides and efficient radioluminescence with short decay lifetimes of organic cations, the material design paves a new pathway to address the issues of low X-ray absorption of organic scintillators and long decay lifetimes of inorganic scintillators simultaneously.

Efficient Red Light Emitting Diodes Based on a Zero-Dimensional Organic Antimony Halide Hybrid.

Zero-dimensional (0D) organic metal halide hybrids (OMHHs) have recently emerged as a new class of light emitting materials with exceptional color tunability. While near-unity photoluminescence quantum efficiencies (PLQEs) are routinely obtained for a large number of 0D OMHHs, it remains challenging to apply them as emitter for electrically driven light emitting diodes (LEDs), largely due to the low conductivity of wide bandgap organic cations. Here, the development of a new OMHH, triphenyl(9-phenyl-9H-carbazol-3-yl) phosphonium antimony bromide (TPPcarzSbBr4 ), as emitter for efficient LEDs, which consists of semiconducting organic cations (TPPcarz+ ) and light emitting antimony bromide anions (Sb2 Br8 2- ), is reported. By replacing one of the phenyl groups in a well-known tetraphenylphosphonium cation (TPP+ ) with an electroactive phenylcarbazole group, a semiconducting TPPcarz+ cation is developed for the preparation of red emitting 0D TPPcarzSbBr4 single crystals with a high PLQE of 93.8%. With solution processed TPPcarzSbBr4 thin films (PLQE of 86.1%) as light emitting layer, red LEDs are fabricated to exhibit an external quantum efficiency (EQE) of 5.12%, a peak luminance of 5957 cd m-2 , and a current efficiency of 14.2 cd A-1 , which are the best values reported to date for electroluminescence devices based on 0D OMHHs.

Design and Synthesis of Kekulè and Non-Kekulè Diradicaloids via the Radical Periannulation Strategy: The Power of Seven Clar's Sextets.

This work introduces an approach to uncoupling electrons via maximum utilization of localized aromatic units, i.e., the Clar's π-sextets. To illustrate the utility of this concept to the design of Kekulé diradicaloids, we have synthesized a tridecacyclic polyaromatic system where a gain of five Clar's sextets in the open-shell form overcomes electron pairing and leads to the emergence of a high degree of diradical character. According to unrestricted symmetry-broken UCAM-B3LYP calculations, the singlet diradical character in this core system is characterized by the y0 value of 0.98 (y0 = 0 for a closed-shell molecule, y0 = 1 for pure diradical). The efficiency of the new design strategy was evaluated by comparing the Kekulé system with an isomeric non-Kekulé diradical of identical size, i.e., a system where the radical centers cannot couple via resonance. The calculated singlet-triplet gap, i.e., the ΔEST values, in both of these systems approaches zero: -0.3 kcal/mol for the Kekulé and +0.2 kcal/mol for the non-Kekulé diradicaloids. The target isomeric Kekulé and non-Kekulé systems were assembled using a sequence of radical periannulations, cross-coupling, and C-H activation. The diradicals are kinetically stabilized by six tert-butyl substituents and (triisopropylsilyl)acetylene groups. Both molecules are NMR-inactive but electron paramagnetic resonance (EPR)-active at room temperature. Cyclic voltammetry revealed quasi-reversible oxidation and reduction processes, consistent with the presence of two nearly degenerate partially occupied molecular orbitals. The experimentally measured ΔEST value of -0.14 kcal/mol confirms that K is, indeed, a nearly perfect singlet diradical.

α-Methylstilbene Isomers: Relationship of Structure to Photophysics and Photochemistry.

Significant differences in the photochemical and photophysical behavior of trans-α-methylstilbene and trans-stilbene have been attributed to structural changes caused by the steric requirements of the methyl group. We present here the X-ray structures of cis- and trans-α-methylstilbene (c- and t-MeSt). This is the first X-ray structure of a cis-stilbene. Despite the pronounced departure from phenyl group coplanarity, the solid-state packing of t-MeSt resembles that of trans-stilbene in that both exhibit disorder with a bicycle pedal structural relationship, dynamic in t-St but static in t-MeSt. We compare the X-ray structures with calculated structures. We also compare our steady state and transient photochemical and spectroscopic results with predictions in a recent theoretical paper that anticipated some of our experiments. Deviations from planarity imposed by the methyl substitution account for the shorter lifetimes of the trans excited states. The rapid torsional relaxation of 1t-MeSt* to the twisted intermediate 1p*, ktp = 2.9 × 1012 s-1, observed using fs transient absorption spectroscopy, explains the sharp decrease in the fluorescence quantum yield of t-MeSt. We correct misconceptions that have appeared in the literature concerning the shape of the stilbene potential energy surface in S1. The nonplanarity due to methyl substitution leads to chirality issues that are relevant in biological molecules such as the protonated Schiff bases of retinal in the opsins.

Effect of solution chemistry on the transport of short-chain and long-chain perfluoroalkyl carboxylic acids (PFCAs) in saturated porous media.

Perfluorocarboxylic acids (PFCAs) are one of the most widely detected classes of PFAS in the global environment after decades of intensive use. This study investigated the impact of perfluorinated carbon chain length on the transport behavior of PFCAs by testing and modeling two short-chain (PFPeA and PFHxA) and two long-chain PFCAs (PFOA and PFDA) in laboratory water-saturated columns. Moreover, their transport behavior was examined under different solution chemistry conditions, including pH, ionic strength, and cationic type. The experimental and simulation results indicated that the chain length had a limited impact on transport behaviors of PFPeA, PFHxA, and PFOA under various pH and ionic strengths, evidenced by their tracer-like breakthrough curves. In contrast, the mobility of PFDA was significantly affected by pH and ionic strengths. Additionally, the transport of all four PFCAs was inhabited in the presence of the divalent cation Ca2+. This study could help predict migration behavior and assess the potential risk of PFCAs in the subsurface system.

Synthesis, characterization, and high-pressure studies of a 3D berkelium(III) carboxylate framework material.

A berkelium(III) mellitate, Bk2[C6(CO2)6](H2O)8·2H2O, was synthesized and rapidly crystallized by reacting mellitic acid, C6(CO2H)6, and BkBr3·nH2O in an aqueous medium. Single crystal X-ray diffraction shows that the compound crystallizes as a three-dimensional framework isostructural with Pu(III), Am(III), and Cm(III) mellitates. UV-vis-NIR spectroscopic studies as a function of pressure were performed using a diamond anvil cell and show that the 5f → 5f transitions of Bk3+ display enhanced hypsochromic shifting when compared to other An(III) mellitates.

Metal Halide Scaffolded Assemblies of Organic Molecules with Enhanced Emission and Room Temperature Phosphorescence.

Ionically bonded organic metal halide hybrids have emerged as versatile multicomponent material systems exhibiting unique and useful properties. The unlimited combinations of organic cations and metal halides lead to the tremendous structural diversity of this class of materials, which could unlock many undiscovered properties of both organic cations and metal halides. Here we report the synthesis and characterization of a series benzoquinolinium (BZQ) metal halides with a general formula (BZQ)Pb2X5 (X = Cl, Br), in which metal halides form a unique two-dimensional (2D) structure. These BZQ metal halides are found to exhibit enhanced photoluminescence and stability as compared to the pristine BZQ halides, due to the scaffolding effects of 2D metal halides. Optical characterizations and theoretical calculations reveal that BZQ+ cations are responsible for the emissions in these hybrid materials. Changing the halide from Cl to Br introduces heavy atom effects, resulting in yellow room temperature phosphorescence (RTP) from BZQ+ cations.

Metal Halide Regulated Photophysical Tuning of Zero-Dimensional Organic Metal Halide Hybrids: From Efficient Phosphorescence to Ultralong Afterglow.

The photophysical tuning is reported for a series of tetraphenylphosphonium (TPP) metal halide hybrids containing distinct metal halides, TPP2 MXn (MXn =SbCl5 , MnCl4 , ZnCl4 , ZnCl2 Br2 , ZnBr4 ), from efficient phosphorescence to ultralong afterglow. The afterglow properties of TPP+ cations could be suspended for the hybrids containing low band gap emissive metal halide species, such as SbCl5 2- and MnCl4 2- , but significantly enhanced for the hybrids containing wide band gap non-emissive ZnCl4 2- . Structural and photophysical studies reveal that the enhanced afterglow is attributed to stronger π-π stacking and intermolecular electronic coupling between TPP+ cations in TPP2 ZnCl4 than in the pristine organic ionic compound TPPCl. Moreover, the afterglow in TPP2 ZnX4 can be tuned by controlling the halide composition, with the change from Cl to Br resulting in a shorter afterglow due to the heavy atom effect.

Thiazol-2-thiolate-Bridged Binuclear Platinum(II) Complexes with High Photoluminescence Quantum Efficiencies of up to Near Unity.

Binuclear platinum(II) complexes with strong Pt-Pt interactions are an interesting class of luminescent materials, of which photophysical properties could be controlled via multiple ways through organic ligands and Pt-Pt distance. While a number of binuclear platinum(II) complexes have been developed with tunable emissions, achieving high photoluminescence quantum efficiency (PLQE) remains challenging and of great interest. Here we report the synthesis and characterization of a series of binuclear 2,4-difluorophenylpyridine platinum(II) complexes bridged by thiazol-2-thiolate ligands with different bulkiness. The three complexes were found to have short Pt-Pt distances ranging from 2.916 to 2.945 Å. The strong Pt-Pt interactions lead to pronounced metal-metal-to-ligand charge transfer (MMLCT) absorptions between 450 and 500 nm, and strong 3MMLCT emissions in the orange/red region. The PLQEs of the new complexes are in the ranges of 2-31% in solution and 26-100% in solid state. These complexes also exhibit excellent stability in halogenated solvents.

Highly efficient eco-friendly X-ray scintillators based on an organic manganese halide.

Scintillation based X-ray detection has received great attention for its application in a wide range of areas from security to healthcare. Here, we report highly efficient X-ray scintillators with state-of-the-art performance based on an organic metal halide, ethylenebis-triphenylphosphonium manganese (II) bromide ((C38H34P2)MnBr4), which can be prepared using a facile solution growth method at room temperature to form inch sized single crystals. This zero-dimensional organic metal halide hybrid exhibits green emission peaked at 517 nm with a photoluminescence quantum efficiency of ~ 95%. Its X-ray scintillation properties are characterized with an excellent linear response to X-ray dose rate, a high light yield of ~ 80,000 photon MeV-1, and a low detection limit of 72.8 nGy s-1. X-ray imaging tests show that scintillators based on (C38H34P2)MnBr4 powders provide an excellent visualization tool for X-ray radiography, and high resolution flexible scintillators can be fabricated by blending (C38H34P2)MnBr4 powders with polydimethylsiloxane.

Phenalenannulations: Three-Point Double Annulation Reactions that Convert Benzenes into Pyrenes.

3-Point annulations, or phenalenannulations, transform a benzene ring directly into a substituted pyrene by "wrapping" two new cycles around the perimeter of the central ring at three consecutive carbon atoms. This efficient, modular, and general method for π-extension opens access to non-symmetric pyrenes and their expanded analogues. Potentially, this approach can convert any aromatic ring bearing a -CH2 Br or a -CHO group into a pyrene moiety. Depending upon the workup choices, the process can be directed towards either tin- or iodo-substituted product formation, giving complementary choices for further various cross-coupling reactions. The two-directional bis-double annulation adds two new polyaromatic extensions with a total of six new aromatic rings at a central core.

Hollow metal halide perovskite nanocrystals with efficient blue emissions.

Metal halide perovskite nanocrystals (NCs) have emerged as new-generation light-emitting materials with narrow emissions and high photoluminescence quantum efficiencies (PLQEs). Various types of perovskite NCs, e.g., platelets, wires, and cubes, have been discovered to exhibit tunable emissions across the whole visible spectrum. Despite remarkable advances in the field of perovskite NCs, many nanostructures in inorganic NCs have not yet been realized in metal halide perovskites, and producing highly efficient blue-emitting perovskite NCs remains challenging and of great interest. Here, we report the discovery of highly efficient blue-emitting cesium lead bromide (CsPbBr3) perovskite hollow NCs. By facile solution processing of CsPbBr3 precursor solution containing ethylenediammonium bromide and sodium bromide, in situ formation of hollow CsPbBr3 NCs with controlled particle and pore sizes is realized. Synthetic control of hollow nanostructures with quantum confinement effect results in color tuning of CsPbBr3 NCs from green to blue, with high PLQEs of up to 81%.

Multicomponent Organic Metal Halide Hybrid with White Emissions.

Zero-dimensional (0D) organic metal halide hybrids, in which organic and metal halide ions cocrystallize to form neutral species, are a promising platform for the development of multifunctional crystalline materials. Herein we report the design, synthesis, and characterization of a ternary 0D organic metal halide hybrid, (HMTA)4 PbMn0.69 Sn0.31 Br8 , in which the organic cation N-benzylhexamethylenetetrammonium (HMTA+ , C13 H19 N4 + ) cocrystallizes with PbBr4 2- , MnBr4 2- , and SnBr4 2- . The wide band gap of the organic cation and distinct optical characteristics of the three metal bromide anions enabled the single-crystalline "host-guest" system to exhibit emissions from multiple "guest" metal halide species simultaneously. The combination of these emissions led to near-perfect white emission with a photoluminescence quantum efficiency of around 73 %. Owing to distinct excitations of the three metal halide species, warm- to cool-white emissions could be generated by controlling the excitation wavelength.

Ligand-Mediated Release of Halides for Color Tuning of Perovskite Nanocrystals with Enhanced Stability.

The rich chemistry of metal halide perovskites has enabled various methods of band structure control and surface passivation. Here we report a highly facile and efficient post-treatment approach for precise color tuning of cesium lead halide perovskite nanocrystals (NCs) with enhanced stability. By utilizing a special multifunctional organic ligand, triphenyl(9-phenyl-9H-carbazol-3-yl)phosphonium bromide (TPP-Carz), carbon-halide bond cleavage can be achieved to release halide ions from halogenated solvents in a controlled manner for color tuning of perovskite NCs via ion exchange. Besides controlled release of halide ions for anion exchange, TPP-Carz can effectively passivate the surfaces of perovskite NCs simultaneously. As a result, perovskite NCs prepared by this post-treatment method with tunable colors over the entire visible spectrum have shown significantly improved luminescence and stability in comparison to the ones prepared using reactive anion precursors without surface passivation by TPP-Carz.