BEC Defender: QR Code-Based Methodology for Prevention of Business Email Compromise (BEC) Attacks.

In an era of ever-evolving and increasingly sophisticated cyber threats, protecting sensitive information from cyberattacks such as business email compromise (BEC) attacks has become a top priority for individuals and enterprises. Existing methods used to counteract the risks linked to BEC attacks frequently prove ineffective because of the continuous development and evolution of these malicious schemes. This research introduces a novel methodology for safeguarding against BEC attacks called the BEC Defender. The methodology implemented in this paper augments the authentication mechanisms within business emails by employing a multi-layered validation process, which includes a MAC address as an identity token, QR code generation, and the integration of timestamps as unique identifiers. The BEC-Defender algorithm was implemented and evaluated in a laboratory environment, exhibiting promising results against BEC attacks by adding an extra layer of authentication.

Nanopatterning via Self-Assembly of a Lamellar-Forming Polystyrene-block-Poly(dimethylsiloxane) Diblock Copolymer on Topographical Substrates Fabricated by Nanoimprint Lithography.

The self-assembly of a lamellar-forming polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) diblock copolymer (DBCP) was studied herein for surface nanopatterning. The DBCP was synthesized by sequential living anionic polymerization of styrene and hexamethylcyclotrisiloxane (D3). The number average molecular weight (Mn), polydispersity index (Mw/Mn) and PS volume fraction (φps) of the DBCP were MnPS = 23.0 kg mol-1, MnPDMS = 15.0 kg mol-1, Mw/Mn = 1.06 and φps = 0.6. Thin films of the DBCP were cast and solvent annealed on topographically patterned polyhedral oligomeric silsesquioxane (POSS) substrates. The lamellae repeat distance or pitch (λL) and the width of the PDMS features (dL) are ~35 nm and ~17 nm, respectively, as determined by SEM. The chemistry of the POSS substrates was tuned, and the effects on the self-assembly of the DBCP noted. The PDMS nanopatterns were used as etching mask in order to transfer the DBCP pattern to underlying silicon substrate by a complex plasma etch process yielding sub-15 nm silicon features.

Morphology, directed self-assembly and pattern transfer from a high molecular weight polystyrene-block-poly(dimethylsiloxane) block copolymer film.

The self-assembly of block copolymers with large feature sizes is inherently challenging as the large kinetic barrier arising from chain entanglement of high molecular weight (MW) polymers limits the extent over which long-range ordered microdomains can be achieved. Here, we illustrate the evolution of thin film morphology from a diblock copolymer of polystyrene-block-poly(dimethylsiloxane) exhibiting total number average MW of 123 kg mol-1, and demonstrate the formation of layers of well-ordered cylindrical microdomains under appropriate conditions of binary solvent mix ratio, commensurate film thickness, and solvent vapor annealing time. Directed self-assembly of the block copolymer within lithographically patterned trenches occurs with alignment of cylinders parallel to the sidewalls. Fabrication of ordered cobalt nanowire arrays by pattern transfer was also implemented, and their magnetic properties and domain wall behavior were characterized.

Nanoscale silicon substrate patterns from self-assembly of cylinder forming poly(styrene)-block-poly(dimethylsiloxane) block copolymer on silane functionalized surfaces.

Poly(styrene)-block-poly(dimethylsiloxane) (PS-b-PDMS) is an excellent block copolymer (BCP) system for self-assembly and inorganic template fabrication because of its high Flory-Huggins parameter (χ âˆ¼ 0.26) at room temperature in comparison to other BCPs, and high selective etch contrast between PS and PDMS block for nanopatterning. In this work, self-assembly in PS-b-PDMS BCP is achieved by combining hydroxyl-terminated poly(dimethylsiloxane) (PDMS-OH) brush surfaces with solvent vapor annealing. As an alternative to standard brush chemistry, we report a simple method based on the use of surfaces functionalized with silane-based self-assembled monolayers (SAMs). A solution-based approach to SAM formation was adopted in this investigation. The influence of the SAM-modified surfaces upon BCP films was compared with polymer brush-based surfaces. The cylinder forming PS-b-PDMS BCP and PDMS-OH polymer brush were synthesized by sequential living anionic polymerization. It was observed that silane SAMs provided the appropriate surface chemistry which, when combined with solvent annealing, led to microphase segregation in the BCP. It was also demonstrated that orientation of the PDMS cylinders may be controlled by judicious choice of the appropriate silane. The PDMS patterns were successfully used as an on-chip etch mask to transfer the BCP pattern to underlying silicon substrate with sub-25 nm silicon nanoscale features. This alternative SAM/BCP approach to nanopattern formation shows promising results, pertinent in the field of nanotechnology, and with much potential for application, such as in the fabrication of nanoimprint lithography stamps, nanofluidic devices or in narrow and multilevel interconnected lines.

Injectable Hydrogel: Amplifying the pH Sensitivity of a Triblock Copolypeptide by Conjugating the N-Termini via Dynamic Covalent Bonding.

We explore the self-assembly behavior of aqueous solutions of an amphiphilic, pH-sensitive poly(l-alanine)-b-poly(l-glutamic acid)-b-poly(l-alanine), (A5E11A5) triblock copolypeptide, end-capped by benzaldehyde through Schiff base reaction. At elevated concentrations and under physiological pH (7.4) and ionic strength (0.15M), the bare copolypeptide aqueous solutions underwent a sol-gel transition after heating and slow cooling thermal treatment, forming opaque stiff gels due to a hierarchical self-assembly that led to the formation of ß-sheet-based twisted super fibers (Popescu et al. Soft Matter 2015, 11, 331-342). The conjugation of the N-termini with benzaldehyde (Bz) through a Schiff base reaction amplifies the copolypeptide pH-sensitivity within a narrow pH window relevant for in vivo applications. Specifically, the dynamic character of the imine bond allowed coupling/decoupling of the Bz upon switching pH. The presence of Bz conjugates to the N-termini of the copolypeptide resulted in enhanced packing of the elementary superfibers into thick and short piles, which inhibited the ability of the system for gelation. However, partial cleavage of Bz upon lowering pH to 6.5 prompted recovery of the hydrogel. The sol-gel transition triggered by pH was reversible, due to the coupling/decoupling of the benzoic-imine dynamic covalent bonding, endowing thus the gelling system with injectability. Undesirably, the gelation temperature window was significantly reduced, which however can be regulated at physiological temperatures by using a suitable mixture of the bare and the Bz-conjugated coplypeptide. This triblock copolypeptide gelator was investigated as a scaffold for the encapsulation of polymersome nanocarriers, loaded with a hydrophilic model drug, calcein. The polymersome/polypeptide complex system showed prolonged probe release in pH 6.5, which is relevant to extracellular tumor environment, rendering the system potentially useful for sustained delivery of anticancer drugs locally in the tumor.

Domain configurations in Co/Pd and L10-FePt nanowire arrays with perpendicular magnetic anisotropy.

Perpendicular magnetic anisotropy [Co/Pd]15 and L10-FePt nanowire arrays of period 63 nm with linewidths 38 nm and 27 nm and film thickness 27 nm and 20 nm respectively were fabricated using a self-assembled PS-b-PDMS diblock copolymer film as a lithographic mask. The wires are predicted to support Néel walls in the Co/Pd and Bloch walls in the FePt. Magnetostatic interactions from nearest neighbor nanowires promote a ground state configuration consisting of alternating up and down magnetization in adjacent wires. This was observed over ∼75% of the Co/Pd wires after ac-demagnetization but was less prevalent in the FePt because the ratio of interaction field to switching field was much smaller. Interactions also led to correlations in the domain wall positions in adjacent Co/Pd nanowires. The reversal process was characterized by nucleation of reverse domains, followed at higher fields by propagation of the domains along the nanowires. These narrow wires provide model system for exploring domain wall structure and dynamics in perpendicular anisotropy systems.

Universal pattern transfer methods for metal nanostructures by block copolymer lithography.

A universal block copolymer pattern transfer method was demonstrated to produce Co nanostructures consisting of arrays of lines or dots from a polystyrene-block-polydimethylsiloxane (PS-b-PDMS) diblock copolymer. Three processes were used: liftoff, a damascene process, and ion beam etching using a hard mask of tungsten, including a sacrificial poly(methyl methacrylate) layer under the PS-b-PDMS for the etch and liftoff processes. The ion beam etch process produced the most uniform magnetic arrays. A structural and magnetic comparison in terms of uniformity, edge roughness and switching field distribution has been reported.

Stimuli responsive fibrous hydrogels from hierarchical self-assembly of a triblock copolypeptide.

In this work, the self-assembly behavior and pH responsiveness of a triblock copolypeptide in aqueous media are demonstrated. The copolypeptide was composed of a central pH responsive poly(l-glutamic acid) (PGA), flanked by two hydrophobic poly(l-alanine) blocks (PAla) (PAla5-PGA11-PAla5). This system showed a pH-responsive transition from short tapes to spherical aggregates by increasing the pH, as a result of deprotonation of the PGA block and a conformational change from α-helix to random coil. Increasing the ionic strength to physiological conditions (0.15 M) has triggered fibrillar self-assembly through intermolecular hydrogen bonding of PAla end-blocks that form ß-sheet nanostructures, in conjunction with charge screening of the central random coil PGA segments. At elevated concentrations a thermo-responsive free supporting hydrogel was obtained, consisting of rigid ß-sheet based twisted superfibers, resulting from hierarchical self-assembly of the copolypeptide. Yet, morphological transformation of this nanostructure was observed upon switching the pH from physiological conditions to pH 4. An unexpected morphology constituted of α-helix-based giant nanobelts was observed as a consequence of the secondary peptide transitions.