Longitudinal assessment of oxidative stress markers and their relationship with exposure to PM2.5 and its bound metals in healthy participants.

OBJECTIVE: Exposure to ambient PM2.5 and its bound metals poses a risk to health and disease, via, in part, oxidative stress response. A variety of oxidative stress markers have been used as markers of response, but their relevance to environmental exposure remains to be established. We evaluated, longitudinally, a battery of oxidative stress markers and their relationship with the exposure of PM2.5 and its bound metals in a panel of healthy participants. MATERIAL AND METHODS: Levels of residence- and personal-based ambient air PM2.5 and its bound metals, as well as of lung function parameters, were assessed in a total of 58 questionnaire-administered healthy never smoker participants (male, 39.7%). Levels of urinary oxidative stress markers, including Nε-(hexanoyl)-lysine (HEL; an early lipid peroxidation product), 4-hydroxynonenal (4-HNE), N7-methylguanine (N7-meG), and 8-hydroxy-2-deoxyguanosine (8-OHdG), plasma antioxidants [superoxide dismutase (SOD) and glutathione peroxidase (GPx), and urinary metals were measured by ELISA, LC-MS, and ICP-MS, respectively. The results of three repeated measurements at two-month intervals were analyzed using the Generalized Estimating Equation (GEE). RESULTS: After adjusting for confounders, residence- and personal-based PM2.5 levels were positively associated with HEL (ß = 0.22 and 0.18) and N7-meG (ß = 0.39 and 0.13). Significant correlations were observed between personal air PM2.5-Pb and urinary Pb with HEL (ß = 0.08 and 0.26). While FVC, FEV1, FEV1/FVC, MMF, and PEFR predicted% were normal, a negative interaction (pollutant*time, P < 0.05) was noted for PM2.5-V, Mn, Co, Ni, Zn, As, and Pb. Additionally, a negative interaction was found for N7-meG (ß = -21.35, -18.77, -23.86) and SOD (ß = -26.56, -26.18, -16.48) with FEV1, FVC, and PEFR predicted%, respectively. CONCLUSION: These findings emphasize potential links between environmental exposure, internal dose, and health effects, thereby offering valuable markers for future research on metal exposure, oxidative stress, and health outcomes.

Exposure profiles of workers from indium tin oxide target manufacturing and recycling factories in Taiwan.

Indium tin oxide exposure poses a potential health risk, but the exposure assessment in occupational setting remains incomplete and continues to be a significant challenge. To this end, we investigated the association of work type, airborne indium concentration, respirable fraction of total indium, and cumulative indium exposure index (CEI) with the levels of plasma indium (P-In) and urinary indium (U-In) among 302 indium tin oxide target manufacturing and recycling workers in Taiwan. We observed that recycling-crushing produced the highest concentrations of total indium (area: 2084.8 µg/m3; personal: 3494.5 µg/m3) and respirable indium (area: 533.4 µg/m3; personal: 742.0 µg/m3). Powdering produced the highest respirable fraction of total indium (area: 58.6%; personal: 81.5%), where the workers had the highest levels of P-In (geometric mean: 2.0 µg/L) and U-In (1.0 µg/g creatinine). After adjusting for the confounder, the CEIs of powdering (ßPR = 0.78; ßPR = 0.44), bonding (ßPT = 0.61; ßPT = 0.37), and processing workers (ßPT = 0.43; ßPT = 0.28) showed significant associations with P-In and U-In, validating its utility in monitoring the exposure. Also, the respirable fraction of total indium significantly contributed to the increased levels of P-In and U-In among workers. The varying levels of relationship noted between indium exposure and the levels of P-In and U-In among workers with different work types suggested that setting the exposure limits among different work types is warranted.

The roles of lumbar load thresholds in cumulative lifting exposure to predict disk protrusion in an Asian population.

BACKGROUND: The purpose of this study was to determine whether a specific threshold per lifting movement, the accumulation above which best predicts lumbar disk protrusion, exists or the total lifting load should be considered. METHODS: This was a retrospective study. Subjects with various lifting exposures were recruited. Disk protrusion was assessed by magnetic resonance imaging. The cumulative lifting load was defined as the sum of the time-weighed lumbar load for each job and was calculated using a biomechanical software system. The effectiveness of accumulation above different thresholds in predicting disk protrusion were compared using four statistical methods. RESULTS: A total of 252 men and 301 women were included in the final analysis. For the men, 3000 Newtons for each lifting task was the optimal threshold for predicting L4-S1 disk protrusion, whereas for the women, 2800 Newtons was optimal. CONCLUSIONS: Our findings suggested that for cumulative lifting exposure, including the total lifting load without defining a minimal exposure limit might not be the optimal method for predicting disk protrusion. The NIOSH 3400 Newton recommended limits do not appear to be the optimal thresholds for preventing disk protrusion. Different lifting thresholds might be needed for men and women in the workplace for their safety.

Longitudinal follow-up of health effects among workers handling engineered nanomaterials: a panel study.

BACKGROUND: Although no human illness to date is confirmed to be attributed to engineered nanoparticles, occupational epidemiological studies are needed to verify the health effects of nanoparticles. This study used a repeated measures design to explore the potential adverse health effects of workers handling nanomaterials. METHODS: Study population was 206 nanomaterial-handling workers and 108 unexposed controls, who were recruited from 14 nanotechnology plants. They were followed up no less than two times in four years. A questionnaire was used to collect potential confounders and detailed work conditions. Control banding was adopted to categorize risk level for each participant as a surrogate marker of exposure. Health hazard markers include cardiopulmonary dysfunction markers, inflammation and oxidative damage markers, antioxidant enzymes activity, and genotoxicity markers. The Generalized Estimating Equation model was applied to analyze repeated measurements. RESULTS: In comparison to the controls, a significant dose-dependent increase on risk levels for the change of superoxide dismutase (p<0.01) and a significant increase of glutathione peroxidase change in risk level 1 was found for nanomaterial-handling workers. However, the change of cardiovascular dysfunction, lung damages, inflammation, oxidative damages, neurobehavioral and genotoxic markers were not found to be significantly associated with nanomaterials handling in this panel study. CONCLUSIONS: This repeated measurement study suggests that there was no evidence of potential adverse health effects under the existing workplace exposure levels among nanomaterials handling workers, except for the increase of antioxidant enzymes.

Measurement of urinary arsenic profiles and DNA hypomethylation in a case-control study of urothelial carcinoma.

Environmental exposure to arsenic may be involved in the disturbance of DNA hypomethylation. The aim of this study is the first to explore the effect of interactions of urinary total arsenic levels, arsenic methylation capacity, 8-hydroxy-2'-deoxyguanosine (8-OHdG), plasma folate, and global 5-methyl-2'-deoxycytidine (5-MedC) levels on the risk of urothelial carcinoma (UC). A hospital-based case-control study was constructed. The research involved the histological recruitment and pathological verification of 178 UC patients and 356 age-/sex-matched controls without prior history of cancer. Arsenic species were determined by high-performance liquid chromatography (HPLC)-hydride generation and atomic absorption. 5-MedC levels were detected by HPLC and triple-quadrupole mass spectrometry (MS). 8-OHdG was processed by an online solid-phase extraction LC-MS/MS. Plasma folate levels were measured using the chemiluminescent technology. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated by multiple logistic regression analysis. Results indicate that the high levels of total urinary arsenic, inorganic arsenic percentage, and 8-OHdG and the low levels of DMA % and plasma folate were independent factors of UC. In addition, global 5-MedC levels in the first quartile versus fifth quartile significantly increased the twofold OR of UC after potential factors were adjusted (95% CI:1.10-4.03). The interaction of 5-MedC level and high total arsenic level, insufficient arsenic capacity, high 8-OHdG, and low folate levels was insignificant. Results of stepwise logistic regression analysis indicate that high total urinary arsenic levels (Q3 versus Q1), low plasma folate level, and low global 5-MedC (Q4 versus Q5) significantly increased the ORs of UC. The above results suggest that high total arsenic, low plasma folate, and 5-MedC levels affect the ORs of UC independently.

Effects of nanoparticles exposure and PON1 genotype on heart rate variability.

OBJECTIVES: This study was to assess the association between different NPs exposure and PON1 genotype on Heart Rate Variability (HRV) parameters among workers. METHODS: This study included 235 non-CVD subjects handled to nanomaterials (NM) and 185 non-exposed controls without CVD from 14 NM plants. All participants completed short-term HRV measurements, and were collected blood specimens to measure PON1 activities and the genotype of the PON1 Q192R polymorphism. RESULTS: In a multivariate regression model, this study observed a positive relationship between nano-Ag exposure and HRV time-domain (RMSSD) and frequency-domain (HF). After adjusting for confounders, the results showed positive associations between RR homozygosity, PON1 paraoxonase/arylesterase activities with HRV, and was particularly noteworthy in RMSSD and HF. CONCLUSIONS: This study shows a significant increment of RMSSD and HF among workers who handled Nano-Ag materials. These results imply that Nano-Ag and PON1 Q192R genotype can trigger ANS reflexes and alter cardiac frequency and function.

Professional Driver's Job Stress and 8-year Risk of Cardiovascular Disease: The Taiwan Bus Driver Cohort Study.

BACKGROUND: Two main job stress models-the Demand-Control-Support (DC) model and the Effort-Reward Imbalance (ERI) model have been used to assess the impact of psychosocial work-related factors for cardiovascular disease (CVD). Limited evidence elaborates the independent and combined effects on CVD events, especially for professional drivers. This study assesses the independent and combined effects of DC and ERI models on an 8-year risk of CVD among professional drivers. METHODS: The Taiwan Bus Driver Cohort Study recruited 1650 professional drivers from a large bus company in 2005. The subjects were interviewed in person and completed the two job stress questionnaires. Researchers found 94 new cases of CVD (International Classification of Diseases, Ninth Revision, Clinical Modification [ICD-9-CM]: 390-459) from 2006 to 2012. A Cox proportional hazards model was performed to estimate the hazard ratio (HR) for CVD events. RESULTS: Occupational drivers with high overcommitment scores (thresholds of 15) had an elevated risk for CVD (HR = 1.71; 95% CI = 1.04, 2.82). Regarding target disease, overcommitment had an increased risk for CVD (not including hypertensive disease) (HR = 1.27; 95% CI = 1.05, 1.54) and ischemic heart disease (HR = 1.32; 95% CI = 1.05-1.65). CONCLUSION: Overcommitment, which is associated with job stress, appears to be associated with CVD risk in professional drivers.

Levels and temporal variations of urinary lead, cadmium, cobalt, and copper exposure in the general population of Taiwan.

Toxic metal contamination in food products and the environment is a public health concern. Therefore, understanding human exposure to cadmium (Cd), lead (Pb), cobalt (Co), and copper (Cu) levels in the general population of Taiwan is necessary and urgent. We aimed to establish the human biomonitoring data of urine toxic metals, exposure profile changes, and factors associated with metal levels in the general population of Taiwan. We randomly selected 1601 participants older than 7 years of age (36.9 ± 18.7 years (7-84 years)) from the Nutrition and Health Survey in Taiwan (NAHSIT) conducted during 1993-1996 (93-96) and 2005-2008 (05-08) periods and measured the levels of four metals in the participants' urine samples using inductively coupled plasma-mass spectrometry. The median (range) levels of urinary Cd, Pb, Co, and Cu in participants from the NAHSIT 93-96 (N = 821)/05-08 (N = 780) were 0.60 (ND-13.90)/0.72 (ND-7.44), 2.28 (ND-63.60)/1.09 (0.04-48.88), 0.91 (0.08-17.30)/1.05 (0.05-22.43), and 16.87 (2.62-158.28)/13.66 (1.67-189.70) µg/L, respectively. We found that the urinary median levels of Pb and Cu in our participants were significantly lower in the NAHSIT 05-08 (Pb 1.09 µg/L, Cu 13.66 µg/L) than in the NAHSIT 93-96 (Pb 2.28 µg/L, Cu 16.87 µg/L; P < 0.01), whereas those of Cd and Co were significantly higher in the NAHSIT 05-08 (Cd 0.72 µg/L, Co 1.05 µg/L; P < 0.01). Youths had higher exposure levels of Pb, Co, and Cu than adults. Participants with alcohol consumption, betel quid chewing, or cigarette smoking had significantly higher median levels of urinary Pb or Cu (P < 0.01) than those without. Principal components and cluster analysis revealed that sex had different exposure profiles of metals. We concluded that levels of urinary Cd, Pb, Co, and Cu exposure in the general Taiwanese varied by age, sex, and lifestyles.

Identification of osteopontin as a biomarker of human exposure to fine particulate matter.

Ambient particulate matter (PM) exposure is associated with pulmonary and cardiovascular diseases; however, there is scant research linking data on animal and human cells. The objective of this study was to investigate these associations. Vascular remodeling plays a crucial role in both pulmonary and cardiovascular diseases. Therefore, we conducted a transcriptomic analysis using vascular smooth muscle cells (VSMCs) to identify potential regulators or markers of PM exposure. We demonstrated that fine and coarse PM increased VSMC proliferation in mice. We conducted a genome-wide cDNA microarray analysis, followed by a pathway analysis of VSMCs treated with coarse PM for durations of 24, 48, and 72 h. Sixteen genes were discovered to be time-dependently upregulated and involved in VSMC proliferation. Osteopontin (OPN) is indicated as one of the regulators of these upregulated genes. Both fine and coarse PM from industrial and urban areas significantly increased OPN expression in VSMCs and macrophages. Moreover, oropharyngeal instillation of fine and coarse PM for 8 weeks increased the VSMCs in the pulmonary arteries of mice. OPN level was consistently increased in the lung tissues, bronchoalveolar lavage fluid, and serum of mice. Moreover, we analyzed the plasma OPN levels of 72 healthy participants recruited from the studied metropolitan area. Each participant wore a personal PM2.5 sampler to assess their PM2.5 exposure over a 24 h period. Our results indicate that personal exposure to fine PM is positively correlated with plasma OPN level in young adults. The data obtained in this study suggest that exposure to fine and coarse PM may cause pulmonary vascular lesions in humans and that OPN level may be a biomarker of PM exposure in humans.

Clustering of malignant pleural mesothelioma in asbestos factories: a subgroup analysis in a 29-year follow-up study to identify high-risk industries in Taiwan.

OBJECTIVE: Exposure to asbestos is the major cause for malignant pleural mesothelioma (MPM), but the causal link of individual cases is difficult to establish for lack of exposure information and long disease latency. METHODS: We established a retrospective cohort of workers employed in asbestos industries during the period of 1950-1989 and the occurrence of MPM during the period of 1980-2009 was examined with the Taiwan Cancer Registry. Estimated rate ratios (eRRs) were computed for each factory where any case of MPM was diagnosed by assuming Poisson distribution with a minimal latency of 20 years. RESULTS: A total of 18 MPM (17 males, 1 female) in eight factories were found. The incidence rate of MPM for the eight factories was 18.0 per million, ranging from 6.2 per million (military factory) to 268.2 per million (asbestos cement). We observed significantly increased risks for MPM in asbestos cement, thermal insulation and shipbuilding industries, with eRR (genders combined) of 113.6, 87.5 and 15.8, respectively. The sensitivity analyses considering latency showed similar findings in latency ≥30 years, and the shipbuilding industry presented a significant eRR given a latency ≥40 years. The gender-specific eRR showed similar results in men, but high eRR of 729.6 was observed in an asbestos cement factory where a female MPM was diagnosed. CONCLUSIONS: This nationwide study in Taiwan comprehensively shows that different asbestos manufacturing processes, including asbestos cement, thermal insulation and shipbuilding industries, were at significantly increased risks for MPM. We recommend to establish a medical screening programme for workers previously exposed to asbestos to identify MPM and other asbestos-related diseases at an earlier stage.