Mechanical-enhanced and Durable Zwitterionic Hydrogel Coating for Inhibiting Coagulation and Reducing Bacterial Infection.

Blood-contact medical devices are indispensable for clinical interventions, yet their susceptibility to thrombosis and bacterial infections poses substantial risks to treatment efficacy and patient well-being. In this study, we introduce a polysulfobetaine/alginate-CuII (SAC) zwitterionic hydrogel coating on polyurethane (PU) surfaces. This approach retained the superhydrophilic and antifouling nature of pSBMA while conferring the antibacterial effects of copper ions. Meanwhile, the copper alginate network intertwines with the polysulfobetaine (pSBMA) network, enhancing its mechanical properties and overcoming inherent weaknesses, thereby improving coating durability. Compared to the substrate, the SAC hydrogel coating significantly reduces thrombus adhesion mass by approximately 81.5% during extracorporeal blood circulation and effectively prevents bacterial biofilm formation even in a high-concentration bacterial milieu over 30 days. Moreover, the results from an isolated blood circulation model in New Zealand white rabbits affirm the impressive anticoagulant efficacy of the SAC hydrogel coating. Our findings suggest that this hydrogel coating and its application method hold promise as a solution for blood-contact material surface modification to address thrombosis and bacterial biofilm formation simultaneously. This article is protected by copyright. All rights reserved.

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater.

Sustainable development has become an inevitable trend in the world's green chemical industry for a generation or more. In this study, a monodisperse magnetic polystyrene mesoporous composite microsphere (MPPS) composed of Fe3O4 nanoparticles loaded on polystyrene mesoporous microspheres is introduced. These microspheres serve as effective adsorbents for the swift removal of cationic dyes. The fabrication of the wastewater adsorbent, with its simple operation and economic practicality, involved a combination of dispersion polymerization, a sulfonation reaction, two-step swelling polymerization, and in situ alkaline oxidation technology. Notably, the adsorption capacity within 3 min reaches 184.0 mg/g, with an impressive adsorption efficiency of 92%. This is primarily attributed to the high specific surface area (Smax) of the MPPS providing more reaction sites for π-π interaction. Simultaneously, the attractive force between negatively charged sulfonic acid groups and cationic dyes is enhanced through surface modification of the MPPS. Furthermore, the MPPS, boasting a maximum saturation magnetization of 38.19 emu/g, ensures rapid separation from the solution for recycling within 3 s. Even after 5 cycles, the adsorption efficiency remains over 90%. The rapid separation of dyes is facilitated by the magnetic attraction of Fe3O4 nanoparticles from the MPPS under the application of a magnetic field. These composite mesoporous materials exhibit outstanding performance in both efficient selective adsorption and recyclability, presenting a novel green adsorbent with promising prospects for sustainable development. This innovation is poised to excel in fields such as sewage treatment, separation, and purification.

Lignin Derived Ultrathin All-Solid Polymer Electrolytes with 3D Single-Ion Nanofiber Ionic Bridge Framework for High Performance Lithium Batteries.

The lignin derived ultrathin all-solid composite polymer electrolyte (CPE) with a thickness of only 13.2 µm, which possess 3D nanofiber ionic bridge networks composed of single-ion lignin-based lithium salt (L-Li) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) as the framework, and poly(ethylene oxide)/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) as the filler, is obtained through electrospinning/spraying and hot-pressing. t. The Li-symmetric cell assembled with the CPE can stably cycle more than 6000 h under 0.5 mA cm-2 with little Li dendrites growth. Moreover, the assembled Li||CPE||LiFePO4 cells can stably cycle over 700 cycles at 0.2 C with a super high initial discharge capacity of 158.5 mAh g-1 at room temperature, and a favorable capacity of 123 mAh g-1 at -20 °C for 250 cycles. The excellent electrochemical performance is mainly attributed to the reason that the nanofiber ionic bridge network can afford uniformly dispersed single-ion L-Li through electrospinning, which synergizes with the LiTFSI well dispersed in PEO to form abundant and efficient 3D Li+ transfer channels. The ultrathin CPE induces uniform deposition of Li+ at the interface, and effectively inhibit the lithium dendrites. This work provides a promising strategy to achieve ultrathin biobased electrolytes for solid-state lithium ion batteries.

Functionalized lignin nanoparticles assembled with MXene reinforced polypropylene with favorable UV-aging resistance, electromagnetic shielding effects and superior fire-safety.

Deterioration in mechanical performances and aging resistance due to the introduction of flame retardants is a major obstacle for bio-based fire-safety polypropylene (PP). Herein, we reported a kind of functionalized lignin nanoparticles assembled with MXene (MX@LNP), and applied it to construct the flame-retardant PP composites (PP-MA) with superior fire safety, excellent mechanical performance, electromagnetic shielding effects and aging resistance. Specifically, the PP-MA doped with only 18 wt% flame-retardant additives (PP-MA18) achieved the UL-94 V-0 rating. In comparison to pure PP, PP-MA18 presented a greatly decreased peak of heat release rate (pHRR), total heat rate (THR), and peak smoke production rate (pSPR) by 79.7 %, 69.0 % and 75.8 %, respectively, and satisfactory decrease in total flammable and toxic volatiles evolved. The formed fine solid microstructure of carbon residuals effectively promoted the compactness of char layers. More importantly, the nano-effect and the strong interface interaction between the complexed MX@LNP and PP enhanced the tensile strength (45.78 MPa) and elongation at break (725.95 %) of PP-MA. Additionally, the significant ultraviolet absorption and electromagnetic wave dissipation performance of MXene and lignin enabled excellent aging resistance and electromagnetic shielding effects of PP-MA compared with PP. This achieved MX@LNP afforded a novel approach for developing flame retardant materials with excellent application performance.

Antihypertensive Drugs Affect the Association of Systolic Blood Pressure Variability with Outcomes in Patients with Acute Stroke who had Successful Recanalization after Endovascular Treatment.

AIMS: Blood pressure variability (BPV) was associated with the clinical outcomes in patients with acute ischemic stroke (AIS) due to large-vessel occlusion (LVO) after endovascular treatment (EVT). This study aimed to investigate whether the use of antihypertensive drugs could affect this association in patients with AIS-LVO after EVT. METHODS: We retrospectively screened consecutive patients with AIS-LVO who had successful recanalization after EVT and calculated their systolic BPV (SBPV) during the first 24 h after EVT using eight statistical methodologies based on previously published literature. Poor outcome was defined as a modified Rankin Scale score of 3-6 at 90 days. Logistic regression analysis was performed to assess this association, and different prediction models were constructed to assess the effect of the use of antihypertensive drugs. RESULTS: A total of 214 patients were finally included, including 92 (43.0%) with good outcomes, and 136 (63.6%) who received antihypertensive drugs. SBPV indicators were significantly lower in patients with good outcomes versus those with poor outcomes. The logistic analysis showed that all SBPV indicators were consistently associated with poor outcomes (odds ratio, 1.031-1.282, all P＜0.05) in all populations, which was confirmed in patients not using antihypertensive drugs. However, no SBPV indicator was found to be associated with poor outcomes in patients using antihypertensive drugs. Receiver operating characteristic curves showed that the area under the curve (AUC) was larger in the model adjusting for antihypertensive drugs (AUC 0.774-0.783) compared with the one not adjusted for antihypertensive drugs (AUC 0.739-0.754). CONCLUSION: In the anterior circulation of patients with AIS-LVO who had successful recanalization after EVT, the utilization of antihypertensive drugs may have some impact on the relationship between SBPV and clinical outcomes.

Injectable Asymmetric Adhesive-Antifouling Bifunctional Hydrogel for Peritoneal Adhesion Prevention.

Peritoneal adhesion is a common problem after abdominal surgery and can lead to various medical problems. In response to the lack of in situ retention and pro-wound healing properties of existing anti-adhesion barriers, this work reports an injectable adhesive-antifouling bifunctional hydrogel (AAB-hydrogel). This AAB-hydrogel can be constructed by "two-step" injection. The tissue adhesive hydrogel based on gallic acid-modified chitosan and aldehyde-modified dextran is prepared as the bottom hydrogel (B-hydrogel) by Schiff base reaction. The aldehyde-modified zwitterionic dextran/carboxymethyl chitosan-based hydrogel is formed on the B-hydrogel surface as the antifouling top hydrogel (T-hydrogel). The AAB-hydrogel exhibits good bilayer binding and asymmetric properties, including tissue adhesive, antifouling, and antimicrobial properties. To evaluate the anti-adhesion effect in vivo, the prepared hydrogels are injected onto the wound surface of a mouse abdominal wall abrasion-cecum defect model. Results suggest that the AAB-hydrogel has antioxidant capacity and can reduce the postoperative inflammatory response by modulating the macrophage phenotype. Moreover, the AAB-hydrogel could effectively inhibit the formation of postoperative adhesions by reducing protein deposition, and resisting fibroblast adhesions and bacteria attacking. Therefore, AAB-hydrogel is a promising candidate for the prevention of postoperative peritoneal adhesions.

Age and sex affect the association of systolic blood pressure with clinical outcomes in thrombolysed stroke patient: a secondary analysis of the INTRECIS study.

Background and purpose: Blood pressure is associated with outcomes in acute ischemic stroke (AIS) patients receiving intravenous alteplase. The study aimed to explore the effect of sex and age on their association. Methods: Based on a prospective cohort, we retrospectively enrolled consecutive AIS patients who received intravenous alteplase and had complete blood pressure data, including baseline systolic blood pressure (SBP 01), SBP at 1 h (SBP 02), and SBP at 24 h (SBP 03) after alteplase. Maximum SBP (SBP max), minimum SBP (SBP min), and mean SBP (SBP mean) were calculated. Poor outcome was defined as having a modified Rankin Scale (mRS) score of 2-6 at 90 days. We explored the effect of age and sex on the association of different SBP indicators with the 3-month outcomes. Results: A total of 1,593 eligible patients were included in the present study. All SBP indicators were found to be higher in patients with poor vs. good outcomes. Multivariate logistic regression analysis showed that all SBP indicators except baseline SBP were associated with poor outcomes with good prediction powers (AUC, 0.762-0.766). More SBP indicators (SBP 02, SBP 03, SBP min, and SBP mean) were associated with poor outcomes in women vs. men, while all SBP indicators after alteplase were associated with poor outcomes in patients aged ≥ 60 years, but none was seen in patients aged < 60 years. Furthermore, all SBP indicators after alteplase were associated with poor outcomes in women aged ≥ 60 years, while only SBP 03 in men aged < 60 years. Conclusion: Among Chinese stroke patients treated with intravenous alteplase, SBP after alteplase was associated with clinical outcomes, which were affected by age and sex.

Chronological adhesive cardiac patch for synchronous mechanophysiological monitoring and electrocoupling therapy.

With advances in tissue engineering and bioelectronics, flexible electronic hydrogels that allow conformal tissue integration, online precision diagnosis, and simultaneous tissue regeneration are expected to be the next-generation platform for the treatment of myocardial infarction. Here, we report a functionalized polyaniline-based chronological adhesive hydrogel patch (CAHP) that achieves spatiotemporally selective and conformal embedded integration with a moist and dynamic epicardium surface. Significantly, CAHP has high adhesion toughness, rapid self-healing ability, and enhanced electrochemical performance, facilitating sensitive sensing of cardiac mechanophysiology-mediated microdeformations and simultaneous improvement of myocardial fibrosis-induced electrophysiology. As a result, the flexible CAHP platform monitors diastolic-systolic amplitude and rhythm in the infarcted myocardium online while effectively inhibiting ventricular remodeling, promoting vascular regeneration, and improving electrophysiological function through electrocoupling therapy. Therefore, this diagnostic and therapeutic integration provides a promising monitorable treatment protocol for cardiac disease.

The association of intracranial atherosclerosis with cerebral small vessel disease imaging markers: a high-resolution magnetic resonance imaging study.

To evaluate the association of intracranial non-stenotic atherosclerotic plaque with cerebral small vessel disease (CSVD) imaging markers in a CSVD population using 3.0 T high-resolution magnetic resonance imaging (HRMRI), which was validated in embolic stroke of undetermined source (ESUS) cohort. We retrospectively recruited consecutive patients who were diagnosed with CSVD or ESUS from January 2015 to December 2019. All patients underwent intracranial HRMRI to assess intracranial non-stenotic atherosclerotic plaques. Baseline and imaging data were collected and were measured among all patients. Among 153 patients with CSVD, there were 59 with intracranial atherosclerotic plaque (IAP) and 94 with non-IAP, including 36 with intracranial atherosclerotic complicated plaque (IACP). Among 227 ESUS patients, there were 155 with IAP and 72 with non-IAP, including 127 with IACP. In the CSVD population, we found that: (1) CSVD burden was associated with IAP (p = 0.036) and IACP (p = 0.008); (2) IAP was associated with white matter hyperintensity (51% vs. 34%; P = 0.039), and IACP was associated with lacunes (69% vs. 35%; P = 0.009) and enlarge perivascular space (69% vs. 39%; P = 0.022). A similar association of CSVD imaging markers with IAP or IACP was found in the ESUS population. Furthermore, the association of unilateral IAP or IACP with CSVD imaging markers of ipsilateral hemisphere was identified in the two cohorts. This is the first report that intracranial non-stenotic atherosclerotic plaque, especially complicated plaque, is closely associated with CSVD imaging markers, which provide further evidence for the association of large artery atherosclerosis with CSVD.

Poly(ether ether ketone) Conferred Polyolefin Separators with High Dimensional Thermal Stability for Lithium-Ion Batteries.

The traditional polyolefin separators used in lithium-ion batteries (LIBs) are plagued by limitations such as poor wetting of electrolytes and insufficient thermal stability, hindering the progress of LIBs. To overcome these limitations, we have developed a modified phase inversion technique to efficiently and durably coat polyolefin separators with poly(ether ether ketone) (PEEK). The resulting PEEK-coated polyolefin separators exhibit mechanical properties similar to those of unmodified polyolefin separators, with comparable tensile strength and modulus. Furthermore, the PEEK coating provides outstanding thermal stability, as the modified separators maintain their stability even at temperatures up to 200 °C, which is among the best results reported for polyolefin-based separators. In addition, the PEEK coating enhances ionic conductivity by more than 100% compared to polyolefin counterparts, leading to significant improvement in the electrochemical performance of prototype half cells. The modified phase inversion technique presented here offers a practical solution for coating polyolefin separators with functional polymers, paving the way for next-generation separator materials.

Single-Ion Polymer Electrolyte Based on Lithium-Rich Imidazole Anionic Porous Aromatic Framework for High Performance Lithium-Ion Batteries.

The low ionic conductivity and Li+ transference number ( t L i + ${t}_{L{i}^ + }$ ) of solid polymer electrolytes (SPEs) seriously hinder their application in lithium-ion batteries (LIBs). In this study, a novel single-ion lithium-rich imidazole anionic porous aromatic framework (PAF-220-Li) is designed. The abundant pores in PAF-220-Li are conducive to the Li+ transfer. Imidazole anion has low binding force with Li+ . The conjugation of imidazole and benzene ring can further reduce the binding energy between Li+ and anions. Thus, only Li+ moved freely in the SPEs, remarkably reducing the concentration polarization and inhibiting lithium dendrite growth. PAF-220-quasi-solid polymer electrolyte (PAF-220-QSPE) is prepared through solution casting of Bis(trifluoromethane)sulfonimide lithium (LiTFSI) infused PAF-220-Li and Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP), and possessed excellent electrochemical performance. The electrochemical property are further improved by preparing all-solid polymer electrolyte (PAF-220-ASPE) via pressing-disc method, which has a high Li+ conductivity of 0.501 mS cm-1 and t L i + ${t}_{L{i}^ + }$ of 0.93. The discharge specific capacity at 0.2 C of Li//PAF-220-ASPE//LFP reached 164 mAh g-1 , and the capacity retention rate is 90% after 180 cycles. This study provided a promising strategy for SPE with single-ion PAFs to achieve high-performance solid-state LIBs.

PAF-6 Doped with Phosphoric Acid through Alkaline Nitrogen Atoms Boosting High-Temperature Proton-Exchange Membranes for High Performance of Fuel Cells.

High-temperature proton-exchange-membrane fuel cells (HT-PEMFCs) can offer improved energy efficiency and tolerance to fuel/air impurities. The high expense of the high-temperature proton-exchange membranes (HT-PEMs) and their low durability at high temperature still impede their further practical applications. In this work, a phosphoric acid (PA)-doped porous aromatic framework (PAF-6-PA) is incorporated into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) to fabricate novel PAF-6-PA/OPBI composite HT-PEMs through solution-casting. The alkaline nitrogen structure in PAF-6 can be protonated with PA to provide proton hopping sites, and its porous structure can enhance the PA retention in the membranes, thus creating fast pathways for proton transfer. The hydrogen bond interaction between the rigid PAF-6 and OPBI can also enhance the mechanical properties and chemical stability of the composite membranes. Consequently, PAF-6-PA/OPBI exhibits an optimal proton conductivity of 0.089 S cm-1 at 200 °C, and peak power density of 437.7 mW cm-2 (Pt: 0.3 mg cm-2 ), which is significantly higher than that of the OPBI.   The PAF-6-PA/OPBI provides a novel strategy for the practical application of PBI-based HT-PEMs.

Single-Ion Gel Polymer Electrolyte based on In-Situ UV Irradiation Cross-Linked Polyimide Complexed with PEO for Lithium-Ion Batteries.

Lithium-ion batteries (LIBs) have become the research focus of energy storage products. Due to the combination of Li+ and the Lewis basic sites of polymer chains, anions move more than five times faster, which do not participate in the electrode reaction during the discharge cycles, leading to concentration polarization, voltage losses, and high internal resistance. To solve this phenomenon, in this work, a polymer network structure of single-ion polymer electrolyte-based polyimide (DPI-SIGPE) with plasticizer ethylene carbonate (EC)/dimethyl carbonate (DMC) is formed by in-situ cross-linking double bond polyimide, 4-styrene sulfonyl (benzenesulfonyl) imide, and cross-linking agent pentaerythritol tetra(2-thiol acetate) under UV irradiation. By incorporating the anion as a part of the polymer chain, DPI-SIGPE exhibits high lithium-ion conductivity of 2.7 × 10-4 S cm-1 at 30 °C and transference number of 0.87. Typical lithium stripping/plating cycling of 900 h demonstrates uniform lithium deposition impacted by DPI-SIGPE. Meanwhile, it has good dimensional thermal stability with no obvious shrinkage at 200 °C for 0.5 h and wide electrochemical window of 4.6 V. Thus, the polyimide-based cross-linked single-ion gel polymer electrolyte has the promising potential for application in LIBs.

Construction of Highly Conductive Cross-Linked Polybenzimidazole-Based Networks for High-Temperature Proton Exchange Membrane Fuel Cells.

High-temperature proton exchange membrane fuel cells (HT-PEMFCs) are of great interest to researchers in industry and academia because of their wide range of applications. This review lists some creative cross-linked polybenzimidazole-based membranes that have been prepared in recent years. Based on the investigation into their chemical structure, the properties of cross-linked polybenzimidazole-based membranes and the prospect of their future applications are discussed. The focus is on the construction of cross-linked structure of various types of polybenzimidazole-based membranes and their effect on proton conductivity. This review expresses the outlook and good expectation of the future direction of cross-linked polybenzimidazole membranes.

Efficient catalysts of surface hydrophobic Cu-BTC with coordinatively unsaturated Cu(I) sites for the direct oxidation of methane.

Selective oxidation of methane to organic oxygenates over metal-organic frameworks (MOFs) catalysts at low temperature is a challenging topic in the field of C1 chemistry because of the inferior stability of MOFs. Modifying the surface of Cu-BTC via hydrophobic polydimethylsiloxane (PDMS) at 235 °C under vacuum not only can dramatically improve its catalytic cycle stability in a liquid phase but also generate coordinatively unsaturated Cu(I) sites, which significantly enhances the catalytic activity of Cu-BTC catalyst. The results of spectroscopy characterizations and theoretical calculation proved that the coordinatively unsaturated Cu(I) sites made H2O2 dissociative into •OH, which formed Cu(II)-O active species by combining with coordinatively unsaturated Cu(I) sites for activating the C-H bond of methane. The high productivity of C1 oxygenates (CH3OH and CH3OOH) of 10.67 mmol gcat.-1h-1 with super high selectivity of 99.6% to C1 oxygenates was achieved over Cu-BTC-P-235 catalyst, and the catalyst possessed excellent reusability.

Lithium-Rich Porous Aromatic Framework-Based Quasi-Solid Polymer Electrolyte for High-Performance Lithium Ion Batteries.

The development of solid polymer electrolytes (SPEs) with high ionic conductivity, wide electrochemical window, and high mechanical strength is the key factor to realize high-energy-density solid lithium ion batteries (SLIBs). Porous aromatic frameworks (PAFs) have the advantages of high porosity, easily functionalized molecular structure, and rigid stable framework, which fully meet the requirements of solid polymer electrolytes with high Li+ capacity, fast Li+ transport, and safety. Herein, a lithium-rich amidoxime (AO)-modified porous aromatic framework (PAF-170-AO) was obtained through the absorption of LiTFSI by amidoxime groups and abundant pores and then compounded with poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) to prepare a PAF-based quasi-solid polymer electrolyte (PAF-QSPE) with only tiny amounts of plasticizer (∼12 µL). The amidoxime groups of PAF-170-AO restricted the movement of the anions of LiTFSI through hydrogen bonding, which effectively promoted the dissociation and migration number of Li+ (tLi+), reduced the concentration polarization, and inhibited the growth of lithium dendrites. The PAF-QSPE exhibited a high ionic conductivity of 1.75 × 10-4 S cm-1 and tLi+ of 0.55 at room temperature. The activation energy was as low as 0.136 eV. Furthermore, the assembled SLIBs with the PAF-QSPE presented a discharge capacity of 163 mAh g-1 at 0.2 C and a capacity retention rate of 96% after 350 cycles, illustrating a stable cycling performance. This work demonstrated the great application potential of lithium-rich PAFs in QSPEs.

Synthesis of a Cyclophosphazene Derivative Containing Multiple Cyano Groups for Electron-Beam Irradiated Flame-Retardant Materials.

A cyclophosphazene derivative containing multiple cyano groups, denoted as hexa(4-cyanophenoxy)cyclotriphosphazene (CN-CP), was synthesized by a one-step nucleophilic substitution reaction for a phosphorus-nitrogen flame retardant. To meet the strict requirement of safe and environment-protective insulation materials, a series of composites based on low-density polyethylene-poly(ethylene-co-vinyl acetate) containing CN-CP/Mg(OH)2/Al(OH)3 organic-inorganic synergistic flame retardants was fabricated. High-energy electron beam irradiation was subsequently applied to obtain a halogen-free flame-retardant crosslinked system. The relationship between crosslinking degree and irradiation dose was studied, and crosslinking degrees ranging within 63-85% were obtained under 100-190 kGy. Furthermore, the effects of CN-CP filler and irradiation dose on the properties of the composites were carefully investigated. The maximum tensile stress and limiting oxygen index values of most composites irradiated by EB were more than 15 MPa and 28%. Results revealed that the obtained materials had excellent thermal and mechanical, flame-retardant, and insulation properties, thereby suggesting their promising prospects for wire and cable applications.

Targeted Therapies in Lung Cancers: Current Landscape and Future Prospects.

BACKGROUND: Lung cancer is the most common malignant cancer worldwide. Targeted therapies have emerged as a promising treatment strategy for lung cancers. OBJECTIVE: To evaluate the current landscape of targets and find promising targets for future new drug discovery for lung cancers, this research identified the science-technology-clinical development pattern and mapped the interaction network of targets. METHODS: Targets for cancers were classified into 3 groups based on a paper published in Nature. We searched for scientific pieces of literature, patent documents and clinical trials of targets in Group 1 and Group 2 for lung cancers. Then, a target-target interaction network of Group 1 was constructed, and the science-technology-clinical (S-T-C) development patterns of targets in Group 1 were identified. Finally, based on the cluster distribution and the development pattern of targets in Group 1, interactions between the targets were employed to predict potential targets in Group 2 for drug development. RESULTS: The target-target interaction (TTI) network of group 1 resulted in 3 clusters with different developmental stages. The potential targets in Group 2 are divided into 3 ranks. Level-1 is the first priority and level-3 is the last. Level-1 includes 16 targets, such as STAT3, CRKL, and PTPN11, that are mostly involved in signaling transduction pathways. Level-2 and level-3 contain 8 and 6 targets, respectively, related to various biological functions. CONCLUSION: This study will provide references for drug development in lung cancers, emphasizing that priorities should be given to targets in Level-1, whose mechanisms are worth further exploration.

TMT-based quantitative proteome profiles reveal the memory function of a whole heart decellularized matrix for neural stem cell trans-differentiation into the cardiac lineage.

Whole organ or tissue decellularized matrices are a promising scaffold for tissue engineering because they maintain the specific memory of the original organ or tissue. A whole organ or tissue decellularized matrix contains extracellular matrix (ECM) components, and exhibits ultrastructural and mechanical properties, which could significantly regulate the fate of stem cells. To better understand the memory function of whole organ decellularized matrices, we constructed a heart decellularized matrix and seeded cross-embryonic layer stem cells - neural stem cells (NSCs) to repopulate the matrix, engineering cardiac tissue, in which a large number of NSCs differentiated into the neural lineage, but besides that, NSCs showed an obvious tendency of trans-differentiating into cardiac lineage cells. The results demonstrated that the whole heart decellularized microenvironment possesses memory function. To reveal the underlying mechanism, TMT-based quantitative proteomics analysis was used to identify the differently expressed proteins in the whole heart decellularized matrix compared with a brain decellularized matrix. 937 of the proteins changed over 1.5 fold, with 573 of the proteins downregulated and 374 of the proteins upregulated, among which integrin ligands in the ECM serve as key signals in regulating NSC fate. The findings here provide a novel insight into the memory function of tissue-specific microenvironments and pave the way for the therapeutic application of personalized tissues.

IFN-γ-/- Mice Resist Actinobacillus pleuropneumoniae Infection by Promoting Early Lung IL-18 Release and PMN-I Accumulation.

Porcine pleuropneumonia is a common infectious disease of pigs caused by Actinobacillus pleuropneumoniae Interferon gamma (IFN-γ) expression increases in the lung of pigs after A. pleuropneumoniae infection, but the role of IFN-γ during the infection is still obscure. In this study, an IFN-γ-/- mouse infection model was established, and bacterial load, levels of inflammatory cytokines, and types of neutrophils in the lungs were studied at different times post-A. pleuropneumoniae infection. We found that wild-type (WT) mice were more susceptible to A. pleuropneumoniae than IFN-γ-/- mice. At 6 h postinfection (hpi), the expression of interleukin 18 (IL-18) and IL-1ß in the lungs of IFN-γ-/- mice was significantly increased compared to WT mice. The bacterial load and levels of inflammatory cytokines (IL-1ß and IL-6) of IFN-γ-/- mice were significantly reduced at 12 hpi compared to WT mice. After an initial loss, the numbers of lung polymorphonuclear (PMN)-I cells dramatically increased in the lungs of IFN-γ-/- but not WT mice, whereas PMN-II cells continually decreased. Finally, in vivo administration of IL-18 significantly reduced clinical scores and bacterial load in the lungs of A. pleuropneumoniae-infected mice. This study identifies IFN-γ as a target for regulating the inflammatory response in the lung and provides a basis for understanding the course of clinical bacterial pneumonia and for the formulation of treatment protocols.