Rickettsia symbionts spread via mixed mode transmission, increasing female fecundity and sex ratio shift by host hormone modulating.

Heritable symbionts are common among animals in nature, but the molecular mechanisms underpinning symbiont invasions of host populations have been elusive. In this study, we demonstrate the spread of Rickettsia in an invasive agricultural pest, the whitefly Bemisia tabaci Mediterranean (MED), across northeastern China from 2018 to 2023. Here, we show that the beneficial symbiont Rickettsia spreads by manipulating host hormone signals. Our analyses suggest that Rickettsia have been horizontally acquired by B. tabaci MED from another invasive whitefly B. tabaci Middle East-Asia Minor 1 during periods of coexistence. Rickettsia is transmitted maternally and horizontally from female B. tabaci MED individuals. Rickettsia infection enhances fecundity and results in female bias among whiteflies. Our findings reveal that Rickettsia infection stimulates juvenile hormone (JH) synthesis, in turn enhancing fecundity, copulation events, and the female ratio of the offspring. Consequently, Rickettsia infection results in increased whitefly fecundity and female bias by modulating the JH pathway. More female progeny facilitates the transmission of Rickettsia. This study illustrates that the spread of Rickettsia among invasive whiteflies in northeastern China is propelled by host hormone regulation. Such symbiont invasions lead to rapid physiological and molecular evolution in the host, influencing the biology and ecology of an invasive species.

Lumped Parameter Thermal Network Modeling and Thermal Optimization Design of an Aerial Camera.

The quality of aerial remote sensing imaging is heavily impacted by the thermal distortions in optical cameras caused by temperature fluctuations. This paper introduces a lumped parameter thermal network (LPTN) model for the optical system of aerial cameras, aiming to serve as a guideline for their thermal design. By optimizing the thermal resistances associated with convection and radiation while considering the camera's unique internal architecture, this model endeavors to improve the accuracy of temperature predictions. Additionally, the proposed LPTN framework enables the establishment of a heat leakage network, which offers a detailed examination of heat leakage paths and rates. This analysis offers valuable insights into the thermal performance of the camera, thereby guiding the refinement of heating zones and the development of effective active control strategies. Operating at a total power consumption of 26 W, the thermal system adheres to the low-power limit. Experimental data from thermal tests indicate that the temperatures within the optical system are maintained consistently between 19 °C and 22 °C throughout the flight, with temperature gradients remaining below 3 °C, satisfying the temperature requirements. The proposed LPTN model exhibits swiftness and efficacy in determining thermal characteristics, significantly facilitating the thermal design process and ensuring optimal power allocation for aerial cameras.

Wolbachia symbionts control sex in a parasitoid wasp using a horizontally acquired gene.

Host reproduction can be manipulated by bacterial symbionts in various ways. Parthenogenesis induction is the most effective type of reproduction manipulation by symbionts for their transmission. Insect sex is determined by regulation of doublesex (dsx) splicing through transformer2 (tra2) and transformer (tra) interaction. Although parthenogenesis induction by symbionts has been studied since the 1970s, its underlying molecular mechanism is unknown. Here we identify a Wolbachia parthenogenesis-induction feminization factor gene (piff) that targets sex-determining genes and causes female-producing parthenogenesis in the haplodiploid parasitoid Encarsia formosa. We found that Wolbachia elimination repressed expression of female-specific dsx and enhanced expression of male-specific dsx, which led to the production of wasp haploid male offspring. Furthermore, we found that E. formosa tra is truncated and non-functional, and Wolbachia has a functional tra homolog, termed piff, with an insect origin. Wolbachia PIFF can colocalize and interact with wasp TRA2. Moreover, Wolbachia piff has coordinated expression with tra2 and dsx of E. formosa. Our results demonstrate the bacterial symbiont Wolbachia has acquired an insect gene to manipulate the host sex determination cascade and induce parthenogenesis in wasps. This study reveals insect-to-bacteria horizontal gene transfer drives the evolution of animal sex determination systems, elucidating a striking mechanism of insect-microbe symbiosis.

Clinical and prognostic significance of CCPG1 in hepatocellular carcinoma.

This study aimed to examine the clinical and prognostic significance of cell-cycle progression gene 1 (CCPG1) in hepatocellular carcinoma (HCC). We firstly analyzed CCPG1 expression in various cancers using The Cancer Genome Atlas and the Genotype-Tissue Expression project databases. The relative expression levels of CCPG1 were determined in 164 paired HCC and adjacent tissues using immunohistochemistry. The correlation between CCPG1 and clinicopathological characteristics of HCC was analyzed. Cox proportional models were used to identify the prognostic factors for overall survival (OS) and disease-free survival (DFS). The expression of CCPG1 was lower in HCC tissues than in adjacent non-tumor liver tissues. The expression of CCPG1 was significantly correlated with tumor number (p = 0.02) and tumor differentiation (p = 0.04) in HCC. Lower expression of CCPG1 in HCC patients was associated with poor OS and DFS (p < 0.01). Relative low expression of CCPG1 in HCC is significantly correlated with the poor prognosis of HCC patients after surgical resection, suggesting its possible role as a potential prognostic marker for HCC.

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process.

Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Reconstruction of the cell pseudo-space from single-cell RNA sequencing data with scSpace.

Tissues are highly complicated with spatial heterogeneity in gene expression. However, the cutting-edge single-cell RNA-seq technology eliminates the spatial information of individual cells, which contributes to the characterization of cell identities. Herein, we propose single-cell spatial position associated co-embeddings (scSpace), an integrative method to identify spatially variable cell subpopulations by reconstructing cells onto a pseudo-space with spatial transcriptome references (Visium, STARmap, Slide-seq, etc.). We benchmark scSpace with both simulated and biological datasets, and demonstrate that scSpace can accurately and robustly identify spatially variated cell subpopulations. When employed to reconstruct the spatial architectures of complex tissue such as the brain cortex, the small intestinal villus, the liver lobule, the kidney, the embryonic heart, and others, scSpace shows promising performance on revealing the pairwise cellular spatial association within single-cell data. The application of scSpace in melanoma and COVID-19 exhibits a broad prospect in the discovery of spatial therapeutic markers.

A bacteriocyte symbiont determines whitefly sex ratio by regulating mitochondrial function.

Nutritional symbionts influence host reproduction, but the underlying molecular mechanisms are largely unclear. We previously found that the bacteriocyte symbiont Hamiltonella impacts the sex ratio of the whitefly Bemisia tabaci. Hamiltonella synthesizes folate by cooperation with the whitefly. Folate deficiency by Hamiltonella elimination or whitefly gene silencing distorted whitefly sex ratio, and folate supplementation restored the sex ratio. Hamiltonella deficiency or gene silencing altered histone H3 lysine 9 trimethylation (H3K9me3) level, which was restored by folate supplementation. Genome-wide chromatin immunoprecipitation-seq analysis of H3K9me3 indicated mitochondrial dysfunction in symbiont-deficient whiteflies. Hamiltonella deficiency compromised mitochondrial quality of whitefly ovaries. Repressing ovary mitochondrial function led to distorted whitefly sex ratio. These findings indicate that the symbiont-derived folate regulates host histone methylation modifications, which thereby impacts ovary mitochondrial function, and finally determines host sex ratio. Our study suggests that a nutritional symbiont can regulate animal reproduction in a way that differs from reproductive manipulators.

Vitellogenin Facilitates Associations between the Whitefly and a Bacteriocyte Symbiont.

Integration between animal reproduction and symbiont inheritance is fundamental in symbiosis biology, but the underlying molecular mechanisms are largely unknown. Vitellogenin (Vg) is critical for oogenesis, and it is also a pathogen pattern recognition molecule in some animals. Previous studies have shown that Vg is involved in the regulation of symbiont abundance and transmission. However, the mechanisms by which an insect and its symbiont contribute to the function of Vg and how Vg impacts the persistence of insect-microbe symbiosis remain largely unclear. Symbionts are transovarially transmitted via maternal inheritance of the bacteriocytes in the whitefly Bemisia tabaci. Surprisingly, Vg is localized in bacteriocytes of whiteflies. Vg could be synthesized in whitefly bacteriocytes by the gene Vg expressed in these cells or exported into bacteriocytes from hemolymph via the Vg receptor. We further found that the juvenile hormone and "Candidatus Portiera aleyrodidarum" (here termed Portiera) control the level and localization of Vg in whiteflies. Immunocapture PCR revealed interactions between Vg and Portiera. Suppressing Vg expression reduced Portiera abundance as well as whitefly oogenesis and fecundity. Thus, we reveal that Vg facilitated the persistence of whitefly-bacteriocyte symbiont associations. This study will provide insight into the key role of Vg in the coevolution of insect reproduction and symbiont inheritance. IMPORTANCE Intracellular heritable symbionts have been incorporated into insect reproductive and developmental biology by various mechanisms. All Bemisia tabaci species harbor the obligate symbiont Portiera in specialized insect cells called bacteriocytes. We report that the whitefly juvenile hormone and Portiera determined vitellogenin (Vg) localization in bacteriocytes of whiteflies. In turn, Vg affected whitefly fecundity as well as fitness and transmission of the symbiont. Our findings show that Vg, a multifunctional protein, is indispensable for symbiont integration into the reproduction and development of insects. This reflects the outcome of long-term coevolution of the insect-microbe symbiosis.

The synergy of synchrotron imaging and convolutional neural networks towards the detection of human micro-scale bone architecture and damage.

The growing health and economic burden of bone fractures, their intricate multiscale features and the existing knowledge gaps in the comprehension of micro-scale bone damage occurrence make fracture diagnosis a challenging issue. In this scenario, deep-learning and artificial intelligence embody the new frontier of healthcare system, by overcoming the subjectivity of clinicians in the analysis of medical images. However, the preliminary attempts in exploiting the power of machine learning algorithms such as neural networks are still limited to bone macro-scale, while there is an evident lack in their application to smaller scales, where damage starts nucleating. Currently, speculations at the micro-scale are only feasible with the aid of high-resolution imaging techniques, that are particularly time consuming in terms of output images analysis. In this context, this works aims at combining the visualization of the micro-crack propagation mechanism with the promising application of convolutional neural networks. The implemented artificial intelligence tool is based for the first time on a large number of human synchrotron images coming from healthy and osteoporotic femoral heads tested under micro-compression. The designed convolutional neural networks are able to automatically detect lacunae and micro-cracks at different compression levels with high accuracy levels; indeed, with the baseline setup, networks achieve more than 0.99 level of accuracy for both cracks and lacunae, and more than 0.87 of the meanIoU adopted as validation metric. This approach is particularly encouraging for the development of powerful recognition system to comprehend bone micro-damage initiation and propagation, paving the way to the application of machine learning studies to bone micromechanics. This could be additionally crucial for future patient specific micro-scale observations to be related to the clinical practice.

Modeling of Dynamic Recrystallization Evolution for Cr8 Alloy Steel and Its Application in FEM.

In the process of Cr8 roller production, the phenomenon of coarse grain size and uneven grain size often appears, which makes the mechanical properties of the material decrease sharply. Accurate dynamic recrystallization model is the basis for predicting the change of grain size during thermal processing, and is an important basis for refining grain and improving material properties. In this study, the isothermal compression experiment was carried out on Cr8 alloy steel at 900-1200 °C and 0.005-0.1 s-1 by Gleeble -1500D thermal simulation compressor, and the stress dates of Cr8 alloy steel were obtained. According to experimental data, the Kopp dynamic recrystallization model of Cr8 alloy steel was established. The dynamic recrystallization volume fraction obtained by Kopp model was compared with that obtained by experiment at the same temperature and strain rate. The correlation value was 0.988, and the root mean square error (RMSE) was 0.053, which proved that the DRX model established was reliable. Through the secondary development of the program, the DRX model of Cr8 alloy steel was written into the software Forge® to verify the microstructure evolution model. The compression process of a cylindrical specimen of Cr8 alloy steel at 0.1 s-1 and 1050 °C was simulated, and the DRX microstructure evolution of the alloy was calculated. The comparison between the final grain size calculation results and the test metallographic photos of samples in different deformation zones shows the relative error of the grain size was less than 10.6%, indicating that the DRX model of Cr8 alloy steel can better predict the dynamic recrystallization of Cr8 alloy steel.

Constitutive Model Parameter Identification Based on Optimization Method and Formability Analysis for Ti6Al4V Alloy.

Titanium alloy is widely applied in aerospace, medical, shipping and other fields due to its high specific strength and low density. The purpose of this study was to analyze the formability of Ti6Al4V alloys at elevated temperatures. An accurate constitutive model is the basic condition for accurately simulating the plastic forming of materials, and it is an important basis for optimizing the parameters of the hot forging forming process. In this study, the optimization algorithm was used to accurately identify the high-temperature constitutive model parameters of Ti6Al4V titanium alloy, and the hot working diagram was established to optimize the hot forming process parameters. The optimal forming conditions of Ti6Al4V titanium alloy are given. Ti6Al4V alloy was subjected to high-temperature compression tests at 800-1000 °C and at strain rates of 0.01-5 s-1 on a Gleeble-1500D thermal/mechanical simulation machine. Each parameter of the Hansel-Spittel constitutive model was taken as an independent variable, and the accumulated error between the stress calculated by the constitutive model and the stress obtained by experimentation was used as an objective function. Based on response surface methodology, an inverse optimization method for identifying the parameters of the high-temperature constitutive model of Ti6Al4V alloy is proposed in this paper. An orthogonal test design was adopted to obtain sample point data, and a third-order response surface approximate model was established. The genetic algorithm (GA) was applied to reversely optimize the parameters of the constitutive model. To verify the accuracy of the optimized constitutive model, the average absolute relative error (AARE) and correlation coefficient (R) were used to evaluate the reliability of optimized constitutive model. The R value of the model was 0.999, and the AARE value was 0.048, respectively, indicating that the established high-temperature constitutive model for Ti6Al4V alloy has good calculation accuracy. The flow stress behavior of the material could be accurately delineated. Meanwhile, in order to study the formability of Ti6Al4V alloy, the hot processing map of the alloy, based on a dynamic material model, was established in this paper. The optimum hot working domains of the Ti6Al4V alloy were determined within 840-920 °C/0.01-0.049 s-1 and 940-980 °C/0.11-1.65 s-1; the hot processing map was verified in combination with the microstructure, and the fine and equiaxed grains and a large amount of ß phase could be found at 850 °C/0.01 s-1.

A novel microRNA regulates cooperation between symbiont and a laterally acquired gene in the regulation of pantothenate biosynthesis within Bemisia tabaci whiteflies.

Horizontally transferred genes (HTGs) play a key role in animal symbiosis, and some horizontally transferred genes or proteins are highly expressed in specialized host cells (bacteriocytes). However, it is not clear how HTGs are regulated, but microRNAs (miRNAs) are prime candidates given their previously demonstrated roles in symbiosis and impacts on the expression of host genes. A horizontally acquired PanBC that is highly expressed in whitefly bacteriocytes can cooperate with an obligate symbiont Portiera for pantothenate production, facilitating whitefly performance and Portiera titre. Here, we found that a whitefly miRNA, novel-m0780-5p, was up-regulated and its target panBC was down-regulated in Portiera-eliminated whiteflies. This miRNA was located in the cytoplasmic region of whitefly bacteriocytes. Injection of novel-m0780-5p agomir reduced the expression of PanBC in whitefly bacteriocytes, while injection of novel-m0780-5p antagomir enhanced PanBC expression. Agomir injection also reduced the pantothenate level, Portiera titre and whitefly performance. Supplementation with pantothenate restored Portiera titre and the fitness of agomir-injected whiteflies. Thus, we demonstrate that a whitefly miRNA regulates panBC-mediated host-symbiont collaboration required for pantothenate synthesis, benefiting the whitefly-Portiera symbiosis. Both panBC and novel-m0780-5p are present in the genomes of six Bemisia tabaci species. The expression of a novel miRNA in multiple B. tabaci species suggests that the miRNA evolved after panBC acquisition, and allowed this gene to be more tightly regulated. Our discovery provides the first account of a HTG being regulated by a miRNA from the host genome, and suggests key roles for interactions between miRNAs and HTGs in the functioning of symbiosis.

Down to the Bone: A Novel Bio-Inspired Design Concept.

The solutions provided through natural evolution of living creatures serve as an ingenious source of inspiration for many technological and applicative fields. Along these lines, bone-inspired concepts lead to fascinating advances in product design, architecture and garments, thanks to the bone's exceptional combination of strength, toughness and lightness. Structural applications are inspired by the bone's ability to resist fracture under a large spectrum of forces, while the high surface area and pore connectivity of bone architecture present exciting opportunities from an aesthetic point of view. Behind these inspirations, a disruptive common belief emerges: "down to the bone", a journey in search of equality, universality and substantiality. Herein, we explore the current state of the art in bone-inspired applications in these fields, considering the two major categories of structural and aesthetic inspirations and discussing further technological developments.

Evaluation of the timing of initiating continuous renal replacement therapy in community-acquired septic patients with acute kidney injury.

Acute kidney injury (AKI) in community-acquired septic patients is often associated with relatively high mortality rate. However, the appropriate timing for continuous renal replacement therapy (CRRT) initiation remains controversial. In the present study, we retrospectively analyzed 123 community-acquired septic patients with AKI admitted to the medical intensive care unit (ICU). The baseline patient characteristics and renal function parameters were compared between survivors and non-survivors. Then, we used the Cox proportional hazard analysis to identify the risk factors for ICU mortality. Moreover, we employed the area under the receiver operating characteristic curve analysis to determine the cutoff time for CRRT initiation. Finally, we used the cutoff time to separate the patients into early (treatment initiated earlier than the cutoff time) and late (treatment initiated later than the cutoff time) CRRT groups and performed the Kaplan-Meier survival analysis to assess the overall mortalities. At the time of ICU release, the mortality rate of the 123 patients was 48.8% (n = 60). We identified several baseline characteristics and renal function parameters that were significantly different between the survivors and the non-survivors. All of them were also identified as the risk factors for community-acquired sepsis. Importantly, the cutoff time point to distinguish the early and late CRRT initiation groups was determined to be 16 h after AKI onset. Based on such grouping, the mortality rate was significantly lower in the early CRRT initiation group at 30, 60 and 90 days. Our data suggest that initiating CRRT within 16 h may help improve the mortality rate of community-acquired septic patients.

The Parameters Identification of High-Temperature Constitutive Model Based on Inverse Optimization Method and 3D Processing Map of Cr8 Alloy Steel.

As a novel kind of cold roller steel, Cr8 alloy steel has the characteristics of high hardness, high wear resistance and good toughness, which can effectively prolong the service life of the roller that is an important part of the steel rolling mill. How to accurately define the constitutive model parameters of metal materials is the major problem, because it seriously affects the accuracy of numerical simulation results of the roller hot forming process. In the study of Cr8 alloy steel's thermal deformation behavior of the present paper, the high temperature compression test was done on a Gleebel-1500D thermal/force simulation testing machine. A novel method of parameter identification was proposed based on inverse optimization. The Hansel-Spittel constitutive model was established by using the inverse optimization method. To carry out the verification on the accuracy of the established constitutive model, the predicted flow-stress of constitutive model was made a contrast to the experimental flow-stress, and the standard statistical parameters were also applied to further evaluation. The results showed a relatively high prediction accuracy of the Hansel-Spittel constitutive model based on the inverse optimization algorithm. Meanwhile, to obtain optimal parameters of Cr8 alloy steel in the thermal processing, 3D thermal processing maps concerning strain-rate, strain and temperature were built based on the dynamic material model. According to the 3D processing map, the most adequate thermal processing parameters of Cr8 alloy steel were obtianed as follows: strain 0.2-0.4, strain-rate 0.05-0.005 s-1, temperature 1100-1150 °C.

Identification of the Constitutive Model Parameters by Inverse Optimization Method and Characterization of Hot Deformation Behavior for Ultra-Supercritical Rotor Steel.

X12 (X12CrMoWVNbN10-1-1) ferritic heat resistant steel is an important material for the production of new-generation ultra-supercritical generator rotors. Hot compression tests of X12 ferritic heat-resistant steel were performed via a Gleeble-1500D testing machine under temperatures of 1050-1250 °C and strain rates of 0.05-5 s-1. In order to provide material model data for finite element simulations and accurately predict the hot deformation behavior, a reverse optimization method was proposed to construct elevated temperature constitutive models of X12 ferritic heat-resistant steel in this paper, according to the Hansel-Spittel constitutive model. To verify the accuracy of the model, the predicted and experimental values of the constitutive model were compared. The results indicated that the model had a high prediction accuracy. Meanwhile, the correlation coefficient between the experimental value and the predicted value of constitutive model was 0.97833. For further verification of the accuracy of the model, it was implemented in finite element FORGE@ software to simulate the compression tests of different samples under different conditions. Comparing actual displacement-load curves with displacement-load curves acquired through finite element simulations, the results indicated that displacement-load curves predicted by the model were very consistent with actual displacement-load curves, which verified the accuracy of the model. Moreover, to research the optimal processing parameters of the material, hot processing maps were drawn according to the dynamic material model. In terms of microstructure evolution, a characteristic area distribution map of the hot processing map was established. Therefore, the optimal hot forming parameters regions were in the range of 1150-1200 °C/0.05-0.62 s-1 for X12 ferritic heat-resistant steel.

RNA binding protein DAZAP1 promotes HCC progression and regulates ferroptosis by interacting with SLC7A11 mRNA.

RNA-binding proteins (RBPs) closely regulate the whole lifecycle of most RNA molecules, from the very early stage of transcription to RNA decay. Dysregulation of RBPs significantly affects the fate of cancer-related transcripts. Therefore, it is imperative to fully understand the complicated RBP-RNA regulatory networks in malignant diseases and to explore novel therapeutic targets. The RBP DAZAP1 (deleted in azoospermia-associated protein 1), originally identified as an important protein in spermatogenesis, had rarely been studied in the context of carcinogenesis. The role of DAZAP1 in hepatocellular carcinoma (HCC) was unveiled in this study. The relative expression of DAZAP1 was significantly upregulated in HCC and was positively associated with several key malignant characteristics and poor postoperative survival in patients. DAZAP1 knockdown by small interfering RNA markedly inhibited HCC cell proliferation, migration and invasion. Furthermore, DAZAP1 significantly reduced cellular sensitivity to sorafenib (SF), which had been proven to be an inducer of ferroptosis by targeting the system Xc- (composed of a light chain, xCT/SLC7A11, and a heavy chain, 4F2 heavy chain). At the mechanistic level, DAZAP1 was identified as a potent inhibitor of ferroptosis and an efficient binding partner of SLC7A11 mRNA. Further study revealed that DAZAP1 interacted with the 3'UTR (untranslated region) of SLC7A11 mRNA and positively regulated its stability. In our work, we clarified novel functions of DAZAP1 and preliminarily revealed its underlying mechanism in ferroptosis, which may be conducive to the exploration of biomarkers and therapeutic targets in HCC patients.

Robust registration for ultra-field infrared and visible binocular images.

The ultra-field infrared and visible image registration is a challenging task due to its nonlinear imaging and multi-modal image features. In this paper, a robust registration method is proposed for the ultra-field infrared and visible images. First, control points are extracted utilizing phase congruency and optimized based on the guidance map, which is proposed according to significant structures information. Second, ROI pair matching is accomplished based on epipolar curve. Its effect is equivalent to a search window that is popular in methods with the standard field of view, and it can overcome the content differences in the search window caused by nonlinear imaging and vision disparity. Third, a descriptor, named multiple phase congruency directional pattern (MPCDP), is established and composed of distribution information and main direction. The phase congruency amplitudes are encoded as binary patterns, and then they are represented as weighted histogram for distribution information. Six pairs of ultra-field infrared and visible images are employed for registration experiments, and the results demonstrate that the performance of the proposed is robust and accurate in five types of ultra-field scenes and two different camera relationships.

Fabrication of 2D-2D Heterojunction Catalyst with Covalent Organic Framework (COF) and MoS2 for Highly Efficient Photocatalytic Degradation of Organic Pollutants.

In this work, for the first time, we fabricated a novel covalent organic framework (COF)-based 2D-2D heterojunction composite MoS2/COF by a facile hydrothermal method. The results of photocatalytic degradation of TC and RhB under simulated solar light irradiation showed that the as-prepared composite exhibited outstanding catalytic efficiency compared with pristine COFs and MoS2. The significantly enhanced catalytic efficiency can be ascribed to the formation of 2D-2D heterojunction with a well-matched band position between COF and MoS2, which can effectively restrain the recombination of charge carriers and increase the light absorption as well as the specific surface area. Moreover, the fabricated 2D-2D layered structure can effectively increase the contact area with an intimate interface contact, which greatly facilitates the charge mobility and transfer in the interfaces. This study reveals that artful integration of organic (COFs) and inorganic materials into a single hybrid with a 2D-2D interface is an effective strategy to fabricate highly efficient photocatalysts.