PagWOX11/12a from hybrid poplar enhances drought tolerance by modulating reactive oxygen species.

WOX11/12 is a homeobox gene of WOX11 and WOX12 in Arabidopsis that plays important roles in crown root development and growth. It has been reported that WOX11/12 participates in adventitious root (AR) formation and different abiotic stress responses, but the downstream regulatory network of WOX11/12 in poplar remains to be further investigated. In this study, we found that PagWOX11/12a is strongly induced by PEG-simulated drought stress. PagWOX11/12a-overexpressing poplar plantlets showed lower oxidative damage levels, greater antioxidant enzyme activities and reactive oxygen species (ROS) scavenging capacity than non-transgenic poplar plants, whereas PagWOX11/12a dominant repression weakened root biomass accumulation and drought tolerance in poplar. RNA-seq analysis revealed that several differentially expressed genes (DEGs) regulated by PagWOX11/12a are involved in redox metabolism and drought stress response. We used RT-qPCR and yeast one-hybrid (Y1H) assays to validate the downstream target genes of PagWOX11/12a. These results provide new insights into the biological function and molecular regulatory mechanism of WOX11/12 in the abiotic resistance processes of poplar.

Air-Stable Self-Driven UV Photodetectors on Controllable Lead-Free CsCu2I3 Microwire Arrays.

The rapid evolution of the Internet of Things has engendered increased requirements for low-cost, self-powered UV photodetectors. Herein, high-performance self-driven UV photodetectors are fabricated by designing asymmetric metal-semiconductor-metal structures on the high-quality large-area CsCu2I3 microwire arrays. The asymmetrical depletion region doubles the photocurrent and response speed compared to the symmetric structure device, leading to a high responsivity of 233 mA/W to 355 nm radiation. Notably, at 0 V bias, the asymmetric device produces an open-circuit voltage of 356 mV and drives to a short-circuit current of 372 pA; meanwhile, the switch ratio (Iph/Idark) reaches up to 103, indicating its excellent potential for detecting weak light. Furthermore, the device maintains stable responses throughout 10000 UV-light switch cycles, with negligible degradation even after 90-day storage in air. Our work establishes that CsCu2I3 is a good candidate for self-powered UV detection and thoroughly demonstrates its potential as a passive device.

Perovskite single-pixel detector for dual-color metasurface imaging recognition in complex environment.

Highly efficient multi-dimensional data storage and extraction are two primary ends for the design and fabrication of emerging optical materials. Although metasurfaces show great potential in information storage due to their modulation for different degrees of freedom of light, a compact and efficient detector for relevant multi-dimensional data retrieval is still a challenge, especially in complex environments. Here, we demonstrate a multi-dimensional image storage and retrieval process by using a dual-color metasurface and a double-layer integrated perovskite single-pixel detector (DIP-SPD). Benefitting from the photoelectric response characteristics of the FAPbBr2.4I0.6 and FAPbI3 films and their stacked structure, our filter-free DIP-SPD can accurately reconstruct different colorful images stored in a metasurface within a single-round measurement, even in complex environments with scattering media or strong background noise. Our work not only provides a compact, filter-free, and noise-robust detector for colorful image extraction in a metasurface, but also paves the way for color imaging application of perovskite-like bandgap tunable materials.

Metalens and microtaper spectrometers on a fingertip.

A multi-foci metalens and a leaky-mode microtaper provide innovative platforms to achieve high-resolution, wideband light spectra in millimeter-sized devices, thereby paving new ways for the commercialization of on-fingertip spectrometers.

Feature ghost imaging for color identification.

On the basis of computational ghost imaging (CGI), we present a new imaging technique, feature ghost imaging (FGI), which can convert the color information into distinguishable edge features in retrieved grayscale images. With the edge features extracted by different order operators, FGI can obtain the shape and the color information of objects simultaneously in a single-round detection using one single-pixel detector. The feature distinction of rainbow colors is presented in numerical simulations and the verification of FGI's practical performance is conducted in experiments. Furnishing a new perspective to the imaging of colored objects, our FGI extends the function and the application fields of traditional CGI while sustaining the simplicity of the experimental setup.

Computational ghost imaging encryption with a pattern compression from 3D to 0D.

The principle of computational ghost imaging (GI) offers a potential application in optical encryption. Nevertheless, large numbers of keys composed of random or specific patterns set an obstacle to its application. Here, we propose a series of pattern compression methods based on computational GI, in which thousands of patterns are replaced by a single standard image (i.e., two-dimensional data), a sequence of numbers (i.e., one-dimensional data) or the fractional part of an irrational number (i.e., zero-dimensional data). Different pattern compression methods are tested in both simulations and experiments, and their error tolerances in encryption are further discussed. Our proposed methods can greatly reduce the pattern amount and enhance encryption security, which pushes forward the application of computational GI, especially in optical encryption.

Single-pixel imaging with Gao-Boole patterns.

Single-pixel imaging (SPI) can perceive the world using only a single-pixel detector, but long sampling times with a series of patterns are inevitable for SPI, which is the bottleneck for its practical application. Developing new patterns to reduce the sampling times might provide opportunities to address this challenge. Based on the Kronecker product of Hadamard matrix, we here design a complete set of new patterns, called Gao-Boole patterns, for SPI. Compared to orthogonal Hadamard basis patterns with elements valued as +1 or -1, our Gao-Boole patterns are non-orthogonal ones and the element values are designed as +1 or 0. Using our Gao-Boole patterns, the reconstructed quality of a target image (N × N pixels) is as high as the Hadamard one but only with half pattern numbers of the Hadamard ones, for both full sampling (N2 for Gao-Boole patterns, 2N2 for Hadamard basis patterns) and undersampling cases in experiment. Effectively reducing the patterns numbers and sampling times without sacrificing imaging quality, our designed Gao-Boole patterns provide a superior option for structural patterns in SPI and help to steer SPI toward practical imaging application.

Visible-Light-Driven [3 + 2]/[4 + 2] Annulation Reactions of Alkenes with N-Aminopyridinium Salts.

The annulation reactions of benzoamidyl radicals with alkenes were realized under visible light irradiation with fac-Ir(ppy)3 as catalyst and N-aminopyridinium salts as benzoamidyl radical precursors. The reaction can deliver two distinct types of products: in the case of vinyl arenes, [3 + 2] annulation product dihydrooxazoles were yielded exclusively; when alkyl-substituted alkenes were used, on the other hand, it afforded [4 + 2] annulation product dihydroisoquinolinones. Factors determining the reaction consequence were elucidated by DFT calculations.

Site-selective coupling of remote C(sp3)-H/meta-C(sp2)-H bonds enabled by Ru/photoredox dual catalysis and mechanistic studies.

Construction of C(sp2)-C(sp3) bonds via regioselective coupling of C(sp2)-H/C(sp3)-H bonds is challenging due to the low reactivity and regioselectivity of C-H bonds. Here, a novel photoinduced Ru/photocatalyst-cocatalyzed regioselective cross-dehydrogenative coupling of dual remote C-H bonds, including inert γ-C(sp3)-H bonds in amides and meta-C(sp2)-H bonds in arenes, to construct meta-alkylated arenes has been accomplished. This metallaphotoredox-enabled site-selective coupling between remote inert C(sp3)-H bonds and meta-C(sp2)-H bonds is characterized by its unique site-selectivity, redox-neutral conditions, broad substrate scope and wide use of late-stage functionalization of bioactive molecules. Moreover, this reaction represents a novel case of regioselective cross-dehydrogenative coupling of unactivated alkanes and arenes via a new catalytic process and provides a new strategy for meta-functionalized arenes under mild reaction conditions. Density functional theory (DFT) calculations and control experiments explained the site-selectivity and the detailed mechanism of this reaction.

Anti-loss-compression image encryption based on computational ghost imaging using discrete cosine transform and orthogonal patterns.

As an emerging imaging technique, computational ghost imaging (CGI) has its unique application in image encryption. However, the long imaging time and high requirement of transmitting data, both in the size of data and vulnerability of lossy compression, limit its application in the practical communications. Using discrete cosine transform to sparse bucket signals of CGI, we here propose a method by transforming the bucket signals from the sensing matrix domain to the space domain, enhancing the ability of the bucket signals (i.e., encrypted image) to resist the lossy compression. Based on the principle of CGI, we first propose to use gradient descent to find an orthogonal matrix as the encryption key, then test the performance of our method at different quality factors and undersampling rates. Both simulations and experimental results demonstrate that our encryption method shows great resistance to the traditional lossy compression methods and has good performance in the undersampling conditions. Our method provides a convenient way to transmit the bucket signals of CGI by the format that involves lossy compression and thus camouflages itself while significantly reducing the amount of data being transmitted.

Three-Component Ru-Catalyzed Regioselective Alkylarylation of Vinylarenes via Meta-Selective C(sp2)-H Bond Functionalization.

We report a novel Ru-catalyzed regioselective alkylarylation of vinylarenes with alkyl halides and arenes via meta-C(sp2)-H bond functionalization to construct 1,1-diarylalkanes that generally show bioactivity. In this transformation, a wide spectrum of primary, secondary, and tertiary alkyl halides and electronically varied arenes was well-tolerated. This reaction is characterized by its exquisite regioselectivity of vinylarenes, unique meta-C(sp2)-H selectivity, and redox-neutral conditions. The mechanism presented was supported by radical probes and kinetic isotope effect studies.

Ni-Catalyzed Remote Radical/Cross-Electrophile Coupling Cascade for Selective C(sp3)-H Arylation.

An innovative 1,5-HAT cascade strategy has been advanced for the nickel-catalyzed distal arylation via cross-electrophile coupling. Through specific migration, the remote C(sp3)-H bond is regioselectively activated, and Ar-I as the available electrophile is used for the construction of the C(sp3)-C(sp2) bond. This method also has broad applicability for benzylic and aliphatic N-fluorocarboxamides with yields up to 80%. Furthermore, a series of control experiments demonstrated that this reaction is probably initiated by a radical process.

Near-infrared ITO-based photonic hypercrystals with large angle-insensitive bandgaps.

The angle-sensitive photonic bandgap (PBG) is one of the typical features of one-dimensional photonic crystals. Based on the phase-variation compensation effect between the dielectric and hyperbolic metamaterials (HMMs), angle-insensitive PBGs can be realized in photonic hypercrystals. However, since hypercrystals are usually constructed using metal components, these angle-insensitive PBGs are mostly limited to narrow bandwidths in visible range. Here, we replace metal with indium tin oxide (ITO) to construct HMMs in the near-infrared range. In these ITO-based HMMs, we experimentally demonstrate the negative refraction of light in transverse magnetic polarization. With this HMM component, we realize a photonic hypercrystal with an angle-insensitive PBG in the wavelength range of 1.15-2.02 µm. These ITO-based hypercrystals with large angle-insensitive PBGs can find applications in near-infrared reflectors or filters.

Three-Component Ruthenium-Catalyzed meta-C-H Alkylation of Phenol Derivatives.

Herein, we realized the multicomponent reactions of phenol derivatives via a six-membered cycloruthenated intermediate for the first time. This strategy exhibited good substrate suitability and functional group tolerance with various phenol derivatives and provided a potential synthetic drug approach. Mechanistic studies showed that a radical might be involved in this process. In addition, the meta alkylated phenol was obtained by further removal of the directing group.

Lewis-Acid-Catalyzed Tandem Cyclization by Ring Expansion of Tertiary Cycloalkanols with Propargyl Alcohols.

A new method for the efficient synthesis of hexahydro-1H-fluorene and octahydrobenzo[a]azulene derivatives through a ring-expansion strategy is reported. With an appropriate combination of thulium(III) trifluoromethanesulfonate and 13X molecular sieves, a range of unsaturated polycyclic compounds were obtained in good yields. Mechanism studies reveal that the reaction is more likely to undergo Meyer-Schuster rearrangement, ring expansion, and Friedel-Crafts-type pathways, which provide a conceptually different strategy for the ring opening of tertiary cycloalkanols.

Full-color photon-counting single-pixel imaging.

We propose and experimentally demonstrate a high-efficiency single-pixel imaging (SPI) scheme by integrating time-correlated single-photon counting (TCSPC) with time-division multiplexing to acquire full-color images at an extremely low light level. This SPI scheme uses a digital micromirror device to modulate a sequence of laser pulses with preset delays to achieve three-color structured illumination, then employs a photomultiplier tube into the TCSPC module to achieve photon-counting detection. By exploiting the time-resolved capabilities of TCSPC, we demodulate the spectrum-image-encoded signals, and then reconstruct high-quality full-color images in a single round of measurement. Based on this scheme, strategies such as single-step measurement, high-speed projection, and undersampling can further improve imaging efficiency.

Diagnostic performance of microRNAs in testicular germ cell tumors: a systematic review and meta-analysis.

The sensitivity (Sen) of classic biomarkers for the diagnosis of testicular germ cell tumors (TGCTs) is currently low. Previous studies have shown the diagnostic potential of microRNAs (miRNAs) for TGCTs; however, the results of these studies are inconsistent. Therefore, we conducted a systematic review and meta-analysis to evaluate their diagnostic value. PubMed, EMBASE, Cochrane Library, and Web of Science databases were systematically searched until September 30, 2020 and 18 trials from 11 studies involving 2,068 participants were included in this meta-analysis. Using a bivariate mixed-effects meta-analysis model, the pooled Sen, specificity (Spe), positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic odds ratio (DOR), and area under the curve (AUC) with 95% confidence interval values of total miRNAs were 0.83 (0.73-0.90), 0.95 (0.89-0.98), 15.79 (7.41-33.66), 0.18 (0.11-0.29), 87.13 (41.99-180.82), and 0.95 (0.93-0.97), respectively; however, the observed values of single miR-371a-3p were 0.84 (0.76-0.90), 0.95 (0.91-0.98), 18.41 (9.69-34.97), 0.17 (0.11-0.26), 111.56 (47.72-260.80), and 0.97 (0.95-0.98), respectively. Subgroup analysis revealed that miRNAs that included miR-371a-3p showed higher predictive performance than those that did not (P < 0.05). This research identified that miR-371a-3p has a high diagnostic value for TGCTs, except teratoma.

Inverse computational ghost imaging for image encryption.

Computer-generated random patterns and bucket detection are two key characteristics of computational ghost imaging (GI), which offer it a potential application in optical encryption. Here, we propose an inverse computational GI scheme, in which bucket signals are firstly selected and then random patterns are calculated correspondingly. Different GI reconstruction algorithms are used to test the inverse computational GI, and the relationship between imaging quality and error ratio factor is discussed as well. Compared with computational GI, our inverse one not only has disguised bucket signals but also provides an opportunity to combine with other cryptographies, both of which enrich the GI-based encryption process and enhance the security simultaneously.

Nonreciprocal Tamm plasmon absorber based on lossy epsilon-near-zero materials.

Contrary to conventional Tamm plasmon (TP) absorbers of which narrow absorptance peaks will shift toward short wavelengths (blueshift) as the incident angle increases for both transverse magnetic (TM) and transverse electric (TE) polarizations, here we theoretically and experimentally achieve nonreciprocal absorption in a planar photonic heterostructure composed of an isotropic epsilon-near-zero (ENZ) slab and a truncated photonic crystal for TM polarization. This exotic phenomenon results from the interplay between ENZ and material loss. And the boundary condition across the ENZ interface and the confinement effect provided by the TP can enhance the absorption in the ENZ slab greatly. As a result, a strong and nonreciprocal absorptance peak is observed experimentally with a maximum absorptance value of 93% in an angle range of 60∼70°. Moreover, this TP absorber shows strong angle-independence and polarization-dependence. As the characteristics above are not at a cost of extra nanopatterning, this structure is promising to offer a practical design in narrowband thermal emitter, highly sensitive biosensing, and nonreciprocal nonlinear optical devices.

Experimental and Computational Studies of Palladium-Catalyzed Spirocyclization via a Narasaka-Heck/C(sp3 or sp2)-H Activation Cascade Reaction.

The first synthesis of highly strained spirocyclobutane-pyrrolines via a palladium-catalyzed tandem Narasaka-Heck/C(sp3 or sp2)-H activation reaction is reported here. The key step in this transformation is the activation of a δ-C-H bond via an in situ generated σ-alkyl-Pd(II) species to form a five-membered spiro-palladacycle intermediate. The concerted metalation-deprotonation (CMD) process, rate-determining step, and energy barrier of the entire reaction were explored by density functional theory (DFT) calculations. Moreover, a series of control experiments was conducted to probe the rate-determining step and reversibility of the C(sp3)-H activation step.