Natural lignocellulosic biomass structure inspired CNF/Lignin/PBAT composite film with thermoplastic, antibacterial and UV-blocking abilities.

The development of a thermoplastic, biodegradable composite material to replace conventional polymers derived from petroleum was the main area of concentration. Herein, a method for preparing antibacterial, UV-blocking and degradable CNF/Lignin/PBAT composite films (CLP) using cellulose nanofibrils (CNFs), lignin, and Poly (butylene adipate-terephthalate) (PBAT) as raw materials by solution casting method was described. With the adding of PBAT, the thermal stability, thermoplastic, mechanical properties were enhanced by improving the compatibility between components. The maximum tensile strength of CLP could reach 189.72 MPa, which increased 25.5 % compared to CNF/Lignin film. The average initial decomposition temperature could reach 321 °C, which much higher than that of CNF and lignin. At the same time, it holds good heat-sealing performance made it suitable for practical use. Meanwhile, the composite films had excellent UV resistance and could block over 95 % of UV light. The antibacterial results indicated that the films had a good inhibitory effect on E. coli and S. aureus, with a maximum inhibitory ring diameter of 5.56 and 6.36 mm. In addition, the composite film also had excellent barrier capability to liquid and gas. The prepared film had potential to produce flexible packing, industrial compositing and biomedical fields.

Scalable Fabrication of Structurally Stable Polymer Film with Excellent UV-Shielding, Fluorescent, and Antibacterial Capabilities.

This research presents a new approach to facilely fabricating a multifunctional film using polyvinyl alcohol (PVA) as the base material. The film is modified chemically to incorporate various desirable properties such as high transparency, UV-shielding, antibacterial activity, and fluorescence. The fabrication process of this film is straightforward and efficient. The modified film showed exceptional UV-blocking capability, effectively blocking 100% of UV radiation. It also exhibits strong antibacterial properties. Additionally, the film emitted bright blue fluorescence, which can be useful in various optical and sensing applications. Despite the chemical modification, the film retained the excellent properties of PVA, including high transparency (90%) at 550 nm and good mechanical strength. Furthermore, it demonstrated remarkable stability even under harsh conditions such as exposure to long-term UV radiation, extreme temperatures (-40 or 120 °C), or immersion in different solvents. Overall, this work showcases a promising strategy to develop versatile, structurally stable, transparent, and flexible polymer films with multiple functionalities. These films have potential applications in various fields that require protection, such as packaging materials, biomedical devices, and optical components.

A neutrophil extracellular trap-related risk score predicts prognosis and characterizes the tumor microenvironment in multiple myeloma.

Multiple myeloma (MM) is a distinguished hematologic malignancy, with existing studies elucidating its interaction with neutrophil extracellular traps (NETs), which may potentially facilitate tumor growth. However, systematic investigations into the role of NETs in MM remain limited. Utilizing the single-cell dataset GSE223060, we discerned active NET cell subgroups, namely neutrophils, monocytes, and macrophages. A transcriptional trajectory was subsequently constructed to comprehend the progression of MM. Following this, an analysis of cellular communication in MM was conducted with a particular emphasis on neutrophils, revealing an augmentation in interactions albeit with diminished strength, alongside abnormal communication links between neutrophils and NK cells within MM samples. Through the intersection of differentially expressed genes (DEGs) between NET active/inactive cells and MM versus healthy samples, a total of 316 genes were identified. This led to the development of a 13-gene risk model for prognostic prediction based on overall survival, utilizing transcriptomics dataset GSE136337. The high-risk group manifested altered immune infiltration and heightened sensitivity to chemotherapy. A constructed nomogram for predicting survival probabilities demonstrated encouraging AUCs for 1, 3, and 5-year survival predictions. Collectively, our findings unveil a novel NET-related prognostic signature for MM, thereby providing a potential avenue for therapeutic exploration.

Osimertinib Covalently Binds to CD34 and Eliminates Myeloid Leukemia Stem/Progenitor Cells.

Osimertinib is a third-generation covalent EGFR inhibitor that is used in treating non-small cell lung cancer. First-generation EGFR inhibitors were found to elicit pro-differentiation effect on acute myeloid leukemia (AML) cells in preclinical studies, but clinical trials yielded mostly negative results. Here, we report that osimertinib selectively induced apoptosis of CD34+ leukemia stem/progenitor cells but not CD34- cells in EGFR-negative AML and chronic myeloid leukemia (CML). Covalent binding of osimertinib to CD34 at cysteines 199 and 177 and suppression of Src family kinases (SFK) and downstream STAT3 activation contributed to osimertinib-induced cell death. SFK and STAT3 inhibition induced synthetic lethality with osimertinib in primary CD34+ cells. CD34 expression was elevated in AML cells compared with their normal counterparts. Genomic, transcriptomic, and proteomic profiling identified mutation and gene expression signatures of patients with AML with high CD34 expression, and univariate and multivariate analyses indicated the adverse prognostic significance of high expression of CD34. Osimertinib treatment induced responses in AML patient-derived xenograft models that correlated with CD34 expression while sparing normal CD34+ cells. Clinical responses were observed in two patients with CD34high AML who were treated with osimertinib on a compassionate-use basis. These findings reveal the therapeutic potential of osimertinib for treating CD34high AML and CML and describe an EGFR-independent mechanism of osimertinib-induced cell death in myeloid leukemia. SIGNIFICANCE: Osimertinib binds CD34 and selectively kills CD34+ leukemia cells to induce remission in preclinical models and patients with AML with a high percentage of CD34+ blasts, providing therapeutic options for myeloid leukemia patients.

Boosting oxygen reduction via MnP nanoparticles encapsulated by N, P-doped carbon to Mn single atoms sites for Zn-air batteries.

An electrocatalyst of single-atomic Mn sites with MnP nanoparticles (NPs) on N, P co-doped carbon substrate was constructed to enhance the catalytic activity of oxygen reduction reaction (ORR) through one-pot in situ doping-phosphatization strategy. The optimized MnSA-MnP-980℃ catalyst exhibits an excellent ORR activity in KOH electrolyte with a half-wave potential (E1/2) of 0.88 V (vs. RHE), and the ORR current density of MnSA-MnP-980℃ maintained 97.9 % for over 25000 s chronoamperometric i-t measurement. When using as the cathode, the MnSA-MnP-980℃ displays a peak power density of 51 mW cm-2 in Zinc-Air batteries, which observably outperformed commercial Pt/C (20 wt%). The X-ray photoelectron spectroscopy reveal that the doped P atoms with a strong electron-donating effectively enhances electron cloud density of Mn SAs sites, facilitating the adsorption of O2 molecules. Meanwhile, the introduction of MnP NPs can regulate the electronic structure of Mn SAs sites, making Mn SAs active sites exist in a low oxidation state and are less positively charged, which can supply electrons for ORR process to narrow the adsorption energy barrier of ORR intermediates. This work constructs novel active sites with excellent ORR properties and provides valuable reference for the development of practical application.

Facile fabrication of cellulose-based hydrophobic paper via Michael addition reaction.

The inherent highly hydrophilic feature of cellulose-based paper hinders its application in many fields. Herein, a cellulose-based hydrophobic paper was fabricated based on surface chemical modification. Firstly, the hydrophobic acrylate components were bonded to the cellulose acetoacetate (CAA) fibers to obtain CAA graft acrylate (CAA-X) fibers through Michael addition reaction. Subsequently, CAA-X fibers were processed into paper via wet papermaking technology. The resulting paper exhibited good hydrophobic performance (water contact angle was up to 135°) with an air permeability of 24.8 µm/Pa·s. The hydrophobicity of paper was very stable and remained even after treating with different solvents. Moreover, the hydrophobic properties of this paper could be adjusted by changing the type of acrylate component. It should be noted that the surface modification strategy has no obvious effects on the whiteness (79.8%), writing, and printing properties of the cellulose fibers. Thus, it is a simple, benign, and efficient strategy for the construction of cellulose-based hydrophobic paper, which has great potential to be used in paper tableware, oil-water separation, watercolor protection, and food packaging fields.

Color-Tunable, Excitation-Dependent, and Water Stimulus-Responsive Room-Temperature Phosphorescence Cellulose for Versatile Applications.

Smart-response materials with ultralong room-temperature phosphorescence (RTP) are highly desirable, but they have rarely been described, especially those originating from sustainable polymers. Herein, a variety of cellulose derivatives with 1,4-dihydropyridine (DHP) rings are synthesized through the Hantzsch reaction, giving impressive RTP with a long lifetime of up to 1251 ms. Specifically, the introduction of acetoacetyl groups and DHP rings promotes the spin-orbit coupling and intersystem crossing process; and multiple interactions between cellulose induce clustering and inhibit the nonradiative transitions, boosting long-live RTP. Furthermore, the resulting transparent and flexible cellulose films also exhibit excitation-dependent and color-tunable afterglows by introducing different extended aromatic groups. More interestingly, the RTP performance of these films is sensitive to water and can be repeated in response to wet/dry stimuli. Inspired by these advantages, the RTP cellulose demonstrates advanced applications in information encryption and anti-counterfeiting. This work not only enriches the photophysical properties of cellulose but also provides a versatile platform for the development of sustainable afterglows.

Effect of Insulin on Bone Formation Ability of Rat Alveolar Bone Marrow Mesenchymal Stem Cells.

The alveolar bone marrow mesenchymal stem cells (ABM-MSCs) play an important role in oral bone healing and regeneration. Insulin is considered to improve impaired oral bones due to local factors, systemic factors and pathological conditions. However, the effect of insulin on bone formation ability of ABM-MSCs still needs to be elucidated. The aim of this study was to determine the responsiveness of rat ABM-MSCs to insulin and to explore the underlying mechanism. We found that insulin promoted ABM-MSCs proliferation in a concentration-dependent manner, in which 10-6 M insulin exerted the most significant effect. 10-6 M insulin significantly promoted the type I collagen (COL-1) synthesis, alkaline phosphatase (ALP) activity, osteocalcin (OCN) expression, and mineralized matrix formation in ABM-MSCs, significantly enhanced the gene and protein expressions of intracellular COL-1, ALP, and OCN. Acute insulin stimulation significantly promoted insulin receptor (IR) phosphorylation, IR substrate-1 (IRS-1) protein expression, and mammalian target of rapamycin (mTOR) phosphorylation, but chronic insulin stimulation decreased these values, while inhibitor NT219 could attenuate these responses. When seeded on ß-tricalcium phosphate (ß-TCP), ABM-MSCs adhered and grew well, during the 28-day culture period, ABM-MSCs+ß-TCP +10-6 M insulin group showed significantly higher extracellular total COL-1 amino-terminus prolongation peptide content, ALP activity, OCN secretion, and Ca and P concentration. When implanted subcutaneously in severe combined immunodeficient mice for 1 month, the ABM-MSCs+ß-TCP +10-6 M insulin group obtained the most bone formation and blood vessels. These results showed that insulin promoted the proliferation and osteogenic differentiation of ABM-MSCs in vitro, and enhance osteogenesis and angiogenesis of ABM-MSCs in vivo. Inhibition studies demonstrated that the insulin-induced osteogenic differentiation of ABM-MSCs was dependent of insulin/mTOR signaling. It suggests that insulin has a direct anabolic effect on ABM-MSCs.

Self-supporting electrocatalyst constructed from in-situ transformation of Co(OH)2 to metal-organic framework to Co/CoP/NC nanosheets for high-current-density water splitting.

Transition metal phosphide (TMP) emerges as a promising electrocatalyst for overall water splitting (OWS). However, conventional TMP materials require exogenous metal ions to participate in coordination reactions, which usually suffer from active site blocking, pronounced intrinsic impedance, and inevitable catalyst shedding at high current density. Herein, a novel in-situ construction strategy has been developed to grow N-doped carbon (NC) enwrapped Co/CoP nanosheets directly onto Co foam (abbreviated as CoF) through a three-step transformation of Co to Co(OH)2 to Co-Metal-Organic Framework (Co-MOF) to Co/CoP/NC. In the entire preparation process, Co metal is only provided by the CoF substrate without external metal sources. Such in-situ construction yields tight contact at the interface of the heterogeneous catalyst, leading to much-reduced impedance and boundary vacancy, while the porous nitrogen-doped carbon backbone further endows the catalyst with the exposure of massive active sites, promotes mass transfer, and possesses high electrical conductivity. The Co/CoP/NC/CoF requires overpotentials of only 64 mV/263 mV@10 mA cm-2 and 414 mV/481 mV@400 mA cm-2 for both HER/OER in 1.0 M KOH, respectively. Remarkably, it reveals excellent OWS catalytic activity with a cell voltage of 1.56 V@10 mA cm-2 and 1.88 V@200 mA cm-2. This strategy of in-situ interface engineering transformation provides new ideas for direct device processing and construction of highly-efficient transition-metal-based OWS electrode materials.

A binder-free ice template method for vertically aligned 3D boron nitride polymer composites towards thermal management.

Hexagonal boron nitride (BN) is an attractive filler candidate for thermal interface materials, but the thermal conductivity enhancement is limited by the anisotropic thermal conductivity of BN and disordered thermal pathways in the polymer matrix. Herein, a facile and economic ice template method is proposed, wherein BN modified by tannic acid (BN-TA) directly self-assemble to form vertically aligned nacre-mimetic scaffold without additional binders and post-treatment. The effects of the BN slurry concentration and the ratio of BN/TA on three-dimensional (3D) skeleton morphology are fully investigated. The corresponding polydimethylsiloxane (PDMS) composite via vacuum-impregnation achieves a high through-plane thermal conductivity of 3.8 W/mK at a low filler loading of 18.7 vol%, which is 2433% and 100% higher than that of pristine PDMS and the PDMS composite with randomly distributed BN-TA, respectively. The finite element analysis results theoretically demonstrate the superiority of the highly longitudinally ordered 3D BN-TA skeleton in axial heat transfer. Additionally, 3D BN-TA/PDMS exhibits excellent practical heat dissipation capability, lower thermal expansion coefficient, and enhanced mechanical properties. This strategy offers an anticipated perspective for developing high-performance thermal interface materials to address the thermal challenges of modern electronics.

In Situ Sprayed Nanovaccine Suppressing Exosomal PD-L1 by Golgi Apparatus Disorganization for Postsurgical Melanoma Immunotherapy.

The anti-PD-L1 immunotherapy has shown promise in treating cancer. However, certain patients with metastatic cancer have low response and high relapse rates. A main reason is systemic immunosuppression caused by exosomal PD-L1, which can circulate in the body and inhibit T cell functions. Here, we show that Golgi apparatus-Pd-l1-/- exosome hybrid membrane coated nanoparticles (GENPs) can significantly reduce the secretion of PD-L1. The GENPs can accumulate in tumors through homotypic targeting and effectively deliver retinoic acid, inducing disorganization of the Golgi apparatus and a sequence of intracellular events including alteration of endoplasmic reticulum (ER)-to-Golgi trafficking and subsequent ER stress, which finally disrupts the PD-L1 production and the release of exosomes. Furthermore, GENPs could mimic exosomes to access draining lymph nodes. The membrane antigen of PD-l1-/- exosome on GENPs can activate T cells through a vaccine-like effect, strongly promoting systemic immune responses. By combining GENPs with anti-PD-L1 treatment in the sprayable in situ hydrogel, we have successfully realized a low recurrence rate and substantially extended survival periods in mice models with incomplete metastatic melanoma resection.

P53 negatively regulates the osteogenic differentiation in jaw bone marrow MSCs derived from diabetic osteoporosis.

Patients with diabetic osteoporosis (DOP) often suffer from poor osseointegration of artificial implants, which is a challenge that affects implant outcomes. The osteogenic differentiation ability of human jaw bone marrow mesenchymal stem cells (JBMMSCs) is the key to implant osseointegration. Studies have shown that the microenvironment of hyperglycemia affects the osteogenic differentiation of mesenchymal stem cells (MSC), but the mechanism is still unclear. Therefore, the aim of this study was to isolate and culture JBMMSCs from surgically derived bone fragments from DOP patients and control patients to investigate the differences in their osteogenic differentiation ability and to elucidate its mechanisms. The results showed that the osteogenic ability of hJBMMSCs was significantly decreased in the DOP environment. Mechanism study showed that the expression of senescence marker gene P53 was significantly increased in DOP hJBMMSCs compared to control hJBMMSCs according to RNA-sequencing result. Further, DOP hJBMMSCs were found to display significant senescence using ß-galactosidase staining, mitochondrial membrane potential and ROS assay, qRT-PCR and WB analysis. Overexpression of P53 in hJBMMSCs, knockdown of P53 in DOP hJBMMSCs, and knockdown followed by overexpression of P53 significantly affected the osteogenic differentiation ability of hJBMMSCs. These results suggest that MSC senescence is an important reason for decreasing osteogenic capacity in DOP patients. P53 is a key target in regulating hJBMMSCs aging, and knocking down P53 can effectively restore the osteogenic differentiation ability of DOP hJBMMSCs and promote osteosynthesis in DOP dental implants. It provided a new idea to elucidate the pathogenesis and treatment of diabetic bone metabolic diseases.

Cone-beam computed tomographic characteristics in degenerative temporomandibular joint disease patients with chewing side preference.

OBJECTIVES: This study is aimed at assessing the Cone-beam computed tomographic (CBCT) characteristics of temporomandibular joints (TMJ) in degenerative temporomandibular joint disease (DJD) patients with chewing side preference (CSP). MATERIALS AND METHODS: CBCT images of 98 patients with DJD (67 with CSP and 31 without CSP) and 22 asymptomatic participants without DJD were measured retrospectively to compare the osteoarthritic changes and the morphology of TMJ. Quantitative analysis of the TMJ radiographic images was performed to present a comparison between the three inter-group groups and between the two sides of the joints. RESULTS: The frequencies of the articular flattening and surface erosion occur more often in the preferred side joints of DJD patients with CSP than the contralateral side. In addition, the horizontal angle of condyle, the depth of glenoid fossa (DGF), and the inclination of articular eminence (IAE) were larger in DJD patients with CSP than that in asymptomatic participants (p<0.05). Also, the condylar anteroposterior dimension of preferred side joints was significantly less than that of non-preferred side (p=0.026), while the width of condyles (p=0.041) and IAE (p=0.045) was greater. CONCLUSIONS: DJD patients with CSP appear to have a higher prevalence of osteoarthritic changes, with the morphological changes such as flat condyle, deep glenoid fossa, and steep articular eminence, which might be considered the characteristic imaging features. CLINICAL RELEVANCE: This study found that CSP is a predisposing factor for the development of DJD, and attention should be paid to the existence of CSP in DJD patients during the clinical practice.

Interface and electronic structure regulation of Mo-doped NiSe2-CoSe2 heterostructure aerogel for efficient overall water splitting.

Transition metal selenides (TMSes) with cubic pyrite-type crystal structure have been widely explored as electrocatalysts for oxygen evolution reaction (OER), but the insufficient hydrogen evolution reaction (HER) performance hinders the application of overall water splitting. Herein, we designed and prepared a Mo doped NiSe2-CoSe2 heterostructure aerogel as bifunctional electrocatalyst via facile spontaneous gelation and selenium vapor deposition. The active sites on the heterointerface possessed desirable Gibbs free energy of hydrogen adsorption, leading to better HER performance than single NiSe2 or CoSe2. Moreover, systematically experimental research and density functional theory (DFT) calculations revealed that fine regulated Mo doping improved the electropositivity of heterostructure, promoting the nucleophilic adsorption of water molecule. Benefit from those improvements, the optimal Mo doped NiSe2-CoSe2 aerogel exhibited an extremely low overpotential of 57 mV at the current density of 10 mA·cm-2 for HER with a small Tafel slope value of 38 mV·dec-1. Meanwhile, Mo doping provided higher electron transfer efficiency and better adsorptive property toward reaction intermediate in anodic reaction, resulting in low overpotential of 270 mV at the current density of 100 mA·cm-2 for OER with good electrocatalytic stability. This work provides an anticipated perspective of rational combination of metal doping and heterostructure for advanced electrocatalysts.

Multistage interfacial engineering of 3D carbonaceous Ni2P nanospheres/nanoflowers derived from Ni-BTC metal-organic frameworks for overall water splitting.

The regulation of the multi-dimensional interface plays an important role in optimizing the electron transport and gas mass transfer during catalysis, which is conducive to promoting the electrocatalytic process. Herein, a self-supporting electrode has been developed with the multistage interface within 3D Ni2P@C nanospheres/nanoflowers arrays derived from metal-organic frameworks (MOFs) as template skeletons and precursors. The constructed nanosphere interface protrudes outward to optimize the contact with the electrolyte while the nanoflower lamellar connection promotes rapid electron transfer and exposes more active sites, and accelerates the gas diffusion with the abundant interspace channels. According to theoretical calculation, the synergistic effect between Ni2P and C is conducive to the optimal adsorption and desorption of H*, thus contributing to the improvement of catalytic kinetics. With the optimized growth times assembled onto nickel foam substrates, the Ni2P@C-12 h requires overpotentials of only 69 mV and 205 mV to drive the current density of 10 mA cm-2 towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. And it reveals an ultralow cell voltage of 1.55 V at 10 mA cm-2 to achieve overall water splitting (OWS). In addition, the stability of the Ni2P@C/NF electrocatalyst emerges as prominent long-term stability, which is attributed to the carbonaceous nanosphere anchors on the substrate to minimize the possibility of oxidation of the catalyst surface. This strategy of in situ growth of MOF-derived phosphates provides a general idea for interfacial engineering modification of OWS electrode materials.

Synergistic effect of Fe/CuNC dual single-atom catalyst for CH bond oxidation.

Transition metal-based (Fe, Co, Cu, etc.) single-atom catalysts (SAC) have been widely used in the direct oxidation of ethylbenzene and benzene. However, their catalytic performance is limited by the low metal loading. Compared with traditional SAC, dual site single-atom catalysts (DSAC) show the advantages of abundant active sites, high metal loading, and excellent catalytic performance. Herein, a novel Fe/CuNC DSAC was prepared by facile one-pot pyrolysis of formaldehyde, dicyandiamide, and metal salts. Dicyandiamide acted as the carbon source with advantage of high nitrogen content, which promoted the formation of metal centers and increased the metal loading. Meanwhile, the synergistic effect between Fe and Cu active centers was revealed to adjust the coordination environment, thus improving the catalytic activity of oxygen activation. The synthesized Fe/CuNC DSAC demonstrated superior catalytic performance in ethylbenzene oxidation reaction with O2 as a green oxidant under mild reaction conditions, with a 99 % conversion of acetophenone and no significant degradation of activity after 10 circles. In addition, NaCl was added into the synthesis as a template to adjust the pore structure, and the modified Fe/CuNC DSAC showed excellent performance in benzene oxidation reaction with high product conversion. In conclusion, this work paves the way for the construction of efficient, green, and cost-effective catalysts for the direct oxidation of ethylbenzene and benzene.

C1Q labels a highly aggressive macrophage-like leukemia population indicating extramedullary infiltration and relapse.

Extramedullary infiltration (EMI) is a concomitant manifestation that may indicate poor outcome of acute myeloid leukemia (AML). The underlying mechanism remains poorly understood and therapeutic options are limited. Here, we employed single-cell RNA sequencing on bone marrow (BM) and EMI samples from a patient with AML presenting pervasive leukemia cutis. A complement C1Q+ macrophage-like leukemia subset, which was enriched within cutis and existed in BM before EMI manifestations, was identified and further verified in multiple patients with AML. Genomic and transcriptional profiling disclosed mutation and gene expression signatures of patients with EMI that expressed high levels of C1Q. RNA sequencing and quantitative proteomic analysis revealed expression dynamics of C1Q from primary to relapse. Univariate and multivariate analysis demonstrated adverse prognosis significance of C1Q expression. Mechanistically, C1Q expression, which was modulated by transcription factor MAF BZIP transcription factor B, endowed leukemia cells with tissue infiltration ability, which could establish prominent cutaneous or gastrointestinal EMI nodules in patient-derived xenograft and cell line-derived xenograft models. Fibroblasts attracted migration of the C1Q+ leukemia cells through C1Q-globular C1Q receptor recognition and subsequent stimulation of transforming growth factor ß1. This cell-to-cell communication also contributed to survival of C1Q+ leukemia cells under chemotherapy stress. Thus, C1Q served as a marker for AML with adverse prognosis, orchestrating cancer infiltration pathways through communicating with fibroblasts and represents a compelling therapeutic target for EMI.

Genome-Wide Screening of Differentially Expressed Genes and their Potential Associations with Aging Dental Pulp Stem Cells.

BACKGROUND: Dental pulp stem cells (DPSCs) refer to a type of stem cells, which is characterized by great differentiation potential and is easy to obtain. DPSCs are able to be employed for treating immune diseases and tissue regeneration. However, the differentiation ability exhibited by aging DPSCs is reduced, thereby limiting the application. As speculated by the microarray analysis, different expressions of miRNAs might be involved in DPSC senescence, whereas comprehensive transcriptome level detection has been rare. OBJECTIVE AND METHODS: To gain insights into the molecular mechanisms involved, RNA-sequencing, pathway enrichment and Gene Ontology Analysis were conducted on aging and young DPSCs. RESULTS: In this study, the differences in long non-coding RNA (lncRNA) and messenger RNA (mRNA expressions) of the aging and young DPSCs were demonstrated, and the vital factors and the relevant pathways were speculated. On the whole, 18950 mRNAs and 21854 lncRNAs were detected, among which 14 mRNAs and 7 lncRNAs were differentially expressed. Furthermore, hsa-miR-6724-5p may be a vital node in the aging process of DPSCs, and its target genes was involved in the dopaminergic synapse. CONCLUSION: In brief, the aging of DPSCs was significantly dependent of differentially expressed genes (DEGs) which is related to dopaminergic synapse. However, the specific function and internal relationship of the DEGs should be verified in depth.

Correlation of patients' demographics and clinical symptoms with temporomandibular disorders.

OBJECTIVE: To investigate the correlation between basic characteristics and clinical features of patients with temporomandibular disorders (TMD). METHODS: The R language statistical tool was used to analyze the clinical information of 500 TMD patients, i.e., age, sex, joint noises, mouth opening pattern, and pain symptoms, as well as the results of the mandibular push-back test. A pairwise correlation analysis of each clinical feature was carried out. RESULTS: The highest incidence of TMD was observed in the age group of 20 to 30 years (240/500). Around 2/3 of the patients showed pain symptoms. Abnormal mouth opening patterns, joint noises, and temporomandibular joint synovitis (TMJS) were observed in 48.4, 65.4, and 34% of patients, respectively. CONCLUSION: Joint click and the corrected deviation of the mouth opening pattern are signs of early-stage TMD, whereas limited mouth opening and TMJS are indicators of progressive stage and complicated TMD.

High efficiency electro- and photo-thermal conversion cellulose nanofiber-based phase change materials for thermal management.

Novel phase change materials composed of polyethylene glycol (PEG), cellulose nanofibers (CNFs) and carbon nanotubes (CNTs) were developed by an efficient and environment friendly strategy. The CNFs were modified and cross-linked by chitosan to form three-dimensional network structure, which provides strong support for the resulting CNF/CNT/PEG composites. The structure and properties of CNF/CNT/PEG composites were characterized using scanning electron microscopy, spectrums, and differential scanning calorimeter. They exhibit high latent heat (158.3 J/g), low heat loss (0.75%) and excellent photo-thermal conversion (energy storage efficiency 85.6%), electro-thermal conversion (energy storage efficiency 92.3%) properties. Due to their excellent performances, CNF/CNT/PEG composites have great potential to be used as thermal management materials.