Dynamically tunable multifunctional terahertz absorber based on hybrid vanadium dioxide and graphene metamaterials.

In this work, in pursuit of a multifunctional device with a simple structure, high absorption rate, and excellent bandwidth, a tunable broadband terahertz (THz) absorber based on vanadium dioxide (V O 2) and graphene is proposed. Due to the phase transition of V O 2 and the electrically tunable properties of graphene, the structure realizes single broadband and dual-band absorption characteristics. When graphene is in the insulating state (E f=0e V) and V O 2 is in the metallic state, the developed system has more than 90% absorption and a wide absorption band from 1.36 to 5.48 THz. By adjusting the V O 2 conductivity, the bandwidth absorption can be dynamically varied from 23% to more than 90%, which makes it a perfect broadband absorber. When graphene is in the metallic state (E f=1e V), V O 2 is in the insulating state, and the designed device behaves as a tunable and perfect dual-band absorber, where the absorptivity of the dual-band spectrum can be continuously adjusted by varying the Fermi energy level of graphene. In addition, both the broad absorption spectrum and the dual-band absorption spectrum maintain strong polarization-independent properties and operate well over a wide incidence angle, and the designed system may provide new avenues for the development of terahertz and other frequency-domain tunable devices.

Unidirectional coupled chiral fiber grating.

We investigate a unidirectional coupled chiral fiber grating (UCFG) with both helical refractive index (RI) and loss modulation. The two modulations form a π/2 phase difference in the fiber cross-sectional azimuth angle, which "breaks" the mode coupled reciprocity of the forward and backward propagation. The forward propagation fundamental mode coupling is forbidden, while the backward propagation fundamental mode is coupled to the vortex mode. A simulation model based on the beam propagation method (BPM) is utilized to confirm the unidirectional coupling. Using the coupled mode analysis, we find that the key to the coupling difference lies in the non-Hermitian coupling matrix. In addition, the UCFG design involving mixed modulation is also discussed. The UCFG demonstrates its potential as a passive vortex beam generator, filter, and detector, with a transmittance difference of up to 30 dB between the coupled and uncoupled vortex modes.

Effects of three plant growth-promoting bacterial symbiosis with ryegrass for remediation of Cd, Pb, and Zn soil in a mining area.

The quality of soil containing heavy metals (HMs) around nonferrous metal mining areas is often not favorable for plant growth. Three types of plant growth promoting rhizobacteria (PGPR)-assisted ryegrass were examined here to treat Cd, Pb, and Zn contaminated soil collected from a nonferrous metal smelting facility. The effects of PGPR-assisted plants on soil quality, plant growth, and the migration and transformation of HMs were evaluated. Results showed that inter-root inoculation of PGPR to ryegrass increased soil redox potential, urease, sucrase and acid phosphatase activities, microbial calorimetry, and bioavailable P, Si, and K content. Inoculation with PGPR also increased aboveground parts and root length, P, Si, and K contents, and antioxidant enzyme activities. The most significant effect was that the simultaneous inoculation of all three PGPRs increased the ryegrass extraction (%) of Cd (59.04-79.02), Pb (105.56-157.13), and Zn (27.71-40.79), compared to CK control (without fungi). Correspondingly, the inter-root soil contents (%) of total Cd (39.94-57.52), Pb (37.59-42.17), and Zn (34.05-37.28) were decreased compared to the CK1 control (without fungi and plants), whereas their bioavailability was increased. Results suggest that PGPR can improve soil quality in mining areas, promote plant growth, transform the fraction of HMs in soil, and increase the extraction of Cd, Pb, and Zn by ryegrass. PGPR is a promising microbe-assisted phytoremediation strategy that can promote the re-greening of vegetation in the mining area while remediating HMs pollution.

Unraveling assemblage of microbial community dwelling in Dabaoshan As/Pb/Zn mine-impacted area: A typical mountain mining area of South China.

Microbial community assemblage includes microorganisms from the three domains including Bacteria, Archaea, and Eukarya (Fungi), which play a crucial role in geochemical cycles of metal(loid)s in mine tailings. Mine tailings harbor vast proportions of metal(loid)s, representing a unique source of co-contamination of metal(loid)s that threaten the environment. The elucidation of the assembly patterns of microbial communities in mining-impacted ecospheres has received little attention. To decipher the microbial community assembly processes, the microbial communities from the five sites of the Dabaoshan mine-impacted area were profiled by the MiSeq sequencing of 16S rRNA (Bacteria and Archaea) genes and internal transcribed spacers (Fungi). Results indicated that the coexistence of 31 bacterial, 10 fungal, and 3 archaeal phyla, were mainly dominated by Mucilaginibacter, Cladophialophora, and Candidatus Nitrosotalea, respectively. The distribution of microorganisms was controlled by deterministic processes. The combination of Cu, Pb, and Sb was the main factor explaining the structure of microbial communities. Functional predicting analysis of bacteria and archaea based on the phylogenetic investigation of communities by reconstruction of unobserved states analyses revealed that the metabolic pathways related to arsenite transporter, arsenate reductase, and FeS cluster were important for metal detoxification. Furthermore, the ecological guilds (pathogens, symbiotrophs, and saprotrophs) of fungal communities explained 44.5 % of functional prediction. In addition, metal-induced oxidative stress may be alleviated by antioxidant enzymes of fungi communities, such as catalase. Such information provides new insights into the microbial assembly rules in co-contaminated sites.

Contrasting response strategies of sulfate-reducing bacteria in a microbial consortium to As3+ stress under anaerobic and aerobic environments.

The sulfate-reducing efficiency of sulfate-reducing bacteria (SRB) is strongly influenced by the presence of oxygen, but little is known about the oxygen tolerance mechanism of SRB and the effect of oxygen on the metalliferous immobilization by SRB. The performance evaluation, identification of bioprecipitates, and microbial and metabolic process analyses were used here to investigate the As3+ immobilization mechanisms and survival strategies of the SRB1 consortium under different oxygen-containing environments. Results indicated that the sulfate reduction efficiency was significantly decreased under aerobic (47.37%) compared with anaerobic conditions (66.72%). SEM analysis showed that under anaerobic and aerobic conditions, the morphologies of mineral particles were different, whereas XRD and XPS analyses showed that the most of As3+ bioprecipitates under both conditions were arsenic minerals such as AsS and As4S4. The abundances of Clostridium_sensu_stricto_1, Desulfovibrio, and Thiomonas anaerobic bacteria were significantly higher under anaerobic than aerobic conditions, whereas the aerobic Pseudomonas showed an opposite trend. Network analysis revealed that Desulfovibrio was positively correlated with Pseudomonas. Metabolic process analysis confirmed that under aerobic conditions the SRB1 consortium generated additional extracellular polymeric substances (rich in functionalities such as Fe-O, SO, CO, and -OH) and the anti-oxidative enzyme superoxide dismutase to resist As3+ stress and oxygen toxicity. New insights are provided here into the oxygen tolerance and detoxification mechanism of SRB and provide a basis for the future remediation of heavy metal(loid)-contaminated environments.

SPP excitation and coupling mechanism based on micro/nano fibers.

A hot trend in the development of optoelectronic devices is how to use the principle of surface plasmon resonance to enhance the performance of integrated photonics devices and achieve miniaturization. This paper proposes an accompanying waveguide coupling structure of micro/nano fibers, which consists of two parallel-placed micro/nano fibers (MNFs) coated with a silver film in the waist region and infused with a refractive index matching oil. In the overlapping region, there exists a segment of surface plasmon polaritons (SPPs) coupling area. The excitation and coupling characteristics of SPPs are studied through numerical simulation. Optimal coupling enhancement configuration is obtained by studying variables such as spacing distance, coupling length, and metal film thickness. A comparison is made with the SPP intensity of a single MNF, showing a 220% increase in electric field intensity, demonstrating its excellent coupling effect. By using this coupling structure, exploration of SPPs excitation and coupling mechanisms is enhanced, and structures resembling interferometric devices can be designed, providing new insights for high-performance miniaturized devices.

Hollow-core pear-shaped conjoined-tube fiber with low loss in the ultraviolet band.

PCTF (pear-shaped conjoined-tube fiber) is presented as a new ultraviolet (UV) guiding fiber with low loss. Results indicate that two PCTFs have better properties than that of previous studies in the UV band. The total loss of two PCTFs is less than 1 dB/km, and its bandwidth exceeds 150 nm between 0.2 and 0.4 µm. Furthermore, PCTF's single-mode performance is very promising, as evidenced by the higher-order mode extinction ratio (HOMER) over 103. The fabrication tolerance is discussed in this paper and results show that the tolerance is good enough to fabricate by normal fiber drawing process. This fiber is promising in applications for nonlinear optics, ultrafast optics, high power laser, and quantum optics.

Ultra-compact on-chip meta-waveguide phase modulator based on split ring magnetic resonance.

With the development of photonic integration technology, meta-waveguides have become a new research hotspot. They have broken through the theoretical diffraction limit by virtue of the strong electromagnetic manipulation ability of the metasurface and the strong electromagnetic field limitation and guidance ability of the waveguide. However, the reported meta-waveguides lack research on dynamic modulation. Therefore, we analyze the modulation effect of the metasurface on the optical field in the waveguide and design an ultra-compact on-chip meta-waveguide phase modulator using split ring magnetic resonance. It has a very short modulation length of only 3.65 µm, wide modulation bandwidth of 116.8 GHz, and low energy consumption of 263.49 fJ/bit. By optimizing the structure, the energy consumption can be further reduced to 90.69 fJ/bit. Meta-waveguides provide a promising method for the design of integrated photonic devices.

Mining-related multi-resistance genes in sulfate-reducing bacteria treatment of typical karst nonferrous metal(loid) mine tailings in China.

Management of tailings at metal mine smelter sites can reduce the potential hazards associated with exposure to toxic metal(loid)s and residual organic flotation reagents. In addition, microbes in the tailings harboring multi-resistance genes (e.g., tolerance to multiple antimicrobial agents) can cause high rates of morbidity and global economic problems. The potential co-selection mechanisms of antibiotic resistance genes (ARGs) and metal(loid) resistance genes (MRGs) during tailings sulfate-reducing bacteria (SRB) treatment have been poorly investigated. Samples were collected from a nonferrous metal mine tailing site treated with an established SRB protocol and were analyzed for selected geochemical properties and high throughput sequencing of 16S rRNA gene barcoding. Based on the shotgun metagenomic analysis, the bacterial domain was dominant in nonferrous metal(loid)-rich tailings treated with SRB for 12 months. KEGGs related to ARGs and MRGs were detected. Thiobacillus and Sphingomonas were the main genera carrying the bacA and mexEF resistance operons, along with Sulfuricella which were also found as the main genera carrying MRGs. The SRB treatment may mediate the distribution of numerous resistance genes. KOs based on the metagenomic database indicated that ARGs (mexNW, merD, sul, and bla) and MRGs (czcABCR and copRS genes) were found on the same contig. The SRB strains (Desulfosporosinus and Desulfotomaculum), and the acidophilic strain Acidiphilium significantly contributed to the distribution of sul genes. The functional metabolic pathways related to siderophores metabolism were largely from anaerobic genera of Streptomyces and Microbacterium. The presence of arsenate reductase, metal efflux pump, and Fe transport genes indicated that SRB treatment plays a key role in the metal(loid)s transformation. Overall, our findings show that bio-treatment is an effective tool for managing ARGs/MRGs and metals in tailings that contain numerous metal(loid) contaminants.

Separating radial and azimuthal polarizations of circular Airy vortex beam via uniaxial crystal.

Since Ciattoni A. et al. found that a particular circularly polarized beam propagating along the optical axis in a uniaxial crystal can generate a vortex with a reversed circular polarization, numerous studies of spin-orbit coupling in this polarization conversion process have been carried out. In this paper, from another perspective rather than the circular polarization conversion, for the first time we find that radial- and azimuthal-polarization components will be separated and finally focus on two separated focus points when circular Airy vortex beams propagate in a uniaxial crystal. Both the separation of the radial- and azimuthal-polarization components in positive and negative uniaxial crystals are investigated, and the physical mechanism of this phenomenon is explained in details. Moreover, the influences of the crystal length and birefringence on the separation of the radial- and azimuthal-polarization components are also discussed. Our results could offer deeper understanding of the propagation of light beam in uniaxial crystal and facilitate the flexible applications of circular Airy vortex beams.

Controlling the spin Hall effect of grafted vortex beams propagating in uniaxial crystal.

Though numerous studies of spin-orbit interaction (SOI) of light beams propagating along the optic axis of uniaxial crystals have been carried out, in previous studies, the initial input beams have cylindrical symmetry. In this case, the total system preserves cylindrical symmetry so that the output light after passing through the uniaxial crystal doesn't exhibit spin dependent symmetry breaking. Therefore, no spin Hall effect (SHE) occurs. In this paper, we investigate the SOI of a kind of novel structured light beam, grafted vortex beam (GVB) in uniaxial crystal. The cylindrical symmetry of the system is broken by the spatial phase structure of the GVB. As a result, a SHE determined by the spatial phase structure emerges. It is found that the SHE and evolution of the local angular momentum are controllable both by changing the grafted topological charge of the GVB and by employing linear electro-optic effect of the uniaxial crystal. This can open a new perspective to investigate the SHE of light beams in uniaxial crystals via constructing and manipulating the spatial structure of the input beams artificially, hence offers novel regulation capabilities of spin photon.

Assembly processes of bacterial and fungal communities in metal(loid)s smelter soil.

There are few studies on concurrent bacterial and fungal community assembly processes that govern the metal(loid)s biogeochemical cycles at smelters. Here, a systematic investigation combined geochemical characterization, co-occurrence patterns, and assembly mechanisms of bacterial and fungal communities inhabiting soils around an abandoned arsenic smelter. Acidobacteriota, Actinobacteriota, Chloroflexi, and Pseudomonadota were dominant in bacterial communities, whereas Ascomycota and Basidiomycota dominated fungal communities. The random forest model indicated the bioavailable fractions of Fe (9.58%) were the main positive factor driving the beta diversity of bacterial communities, and the total N (8.09%) was the main negative factor for fungal communities. Microbe-contaminant interactions demonstrate the positive impact of the bioavailable fractions of certain metal(loid)s on bacteria (Comamonadaceae and Rhodocyclaceae) and fungi (Meruliaceae and Pleosporaceae). The fungal co-occurrence networks exhibited more connectivity and complexity than the bacterial networks. The keystone taxa were identified in bacterial (including Diplorickettsiaceae, norank_o_Candidatus_Woesebacteria, norank_o_norank_c_AT-s3-28, norank_o_norank_c_bacteriap25, and Phycisphaeraceae) and fungal (including Biatriosporaceae, Ganodermataceae, Peniophoraceae, Phaeosphaeriaceae, Polyporaceae, Teichosporaceae, Trichomeriaceae, Wrightoporiaceae, and Xylariaceae) communities. Meanwhile, community assembly analysis revealed that deterministic processes dominated the microbial community assemblies, which were highly impacted by pH, total N, and total and bioavailable metal(loid) content. This study provides helpful information to develop bioremediation strategies for the mitigation of metal(loid)s-polluted soils.

Fiber-integrated catenary ring-array metasurfaces for beam shaping.

Catenary is referred to as "the real mathematical and mechanical form" in the architectural field. Because of the unique phase control characteristic of the catenary, it has excellent ability in optical manipulation. Here, we propose an optical waveform conversion device based on optical fiber-integrated catenary ring-array metasurfaces. The device consists of a cascade structure of a single-mode fiber (SMF) and a graded-index fiber (GIF). At the GIF end, two kinds of catenary ring-array metasurfaces are introduced to realize beam shaping from Gaussian beam (GB) to Bessel beam. The device can selectively generate a focused or non-diffracting Bessel beam by changing the circular polarization state of the incident light. It is worth noting that under some parameters of the device, the output Bessel beam can break through the diffraction limit, which has potential applications in the fields of optical imaging, optical communication, and optical trapping.

Transformation mechanism of methylphosphonate to methane by Burkholderia sp: Insight from multi-labeled water isotope probing and transcriptomic.

Methylphosphonate (MPn), has been identified as a likely source of methane in aerobic ocean and may be responsible for the "ocean methane paradox", that is oversaturation of dissolved methane in oxic sea waters. However, the mechanism underlying the cleavage of C-P bonds during microbial degradation is not well understood. Using multi-labeled water isotope probing (MLWIP) and transcriptome analysis, we investigated the phosphate oxygen isotope systematics and mechanisms of microbial-mediated degradation of MPn in this study. In the aerobic culture containing MPn as the only phosphorus source, there was a significant release of inorganic phosphate (149.4 µmol/L) and free methane (268.3 mg/L). The oxygen isotopic composition of inorganic phosphorus (δ18OP) of accumulated released phosphate was 4.50‰, 23.96‰, and 40.88‰, respectively, in the corresponding 18O-labeled waters of -10.3‰, 9.9‰, and 30.6‰, and the slope obtained in plots of δ18OP versus the oxygen isotopic composition of water (δ18OW) was 0.89. Consequently, 89% of the oxygen atoms (Os) in phosphate (PO4) were exchanged with 18O-labeled waters in the medium, while the rest were exchanged with intracellular metabolic water. It has been confirmed that the C-P bond cleavage of MPn occurs in the cell with both ambient and metabolic water participation. Moreover, phn gene clusters play significant roles to cleave the C-P bond of MPn for Burkholderia sp. HQL1813, in which phnJ, phnM and phnI genes are significantly up-regulated during MPn decomposition to methane. In conclusion, the aerobic biotransformation of MPn to free methane by Burkholderia sp. HQL1813 has been elucidated, providing new insights into the mechanism that bio-cleaves C-P bonds to produce methane aerobically in aqueous environments for representative phosphonates.

Active tailings disturb the surrounding vegetation soil fungal community: Diversity, assembly process and co-occurrence patterns.

Soil fungi play an important role in the soil biogeochemical cycle and are important biological indicators for the ecological remediation of mine tailings contaminated sites, therefore understanding the characteristics of soil fungal communities is a key aspect of pollution remediation. However, the influence of biological factors on the characteristics of fungal community diversity; assembly mechanisms and co-occurrence patterns of fungal community along environmental gradients around tailings are not well understood. In this study, soil samples from forest, agriculture and grass around tailings were collected to reveal the assembly mechanisms and co-occurrence patterns of soil fungal community and to quantify the contribution of abiotic and biotic factors to fungal diversity. The results suggest that vegetation types and Cu concentration together drive the distribution of fungal diversity. We found that Exophiala has potential as a biomarker species indicative of restoration progress. Increased environmental stress accelerates the process of changing fungal community assemblages from stochastic to deterministic, while also allowing fungal communities tend to resist tailings-induced environmental stresses through species coexistence. Together, this study provides new insights into the influence of biological factors on fungal community diversity, as well as revealing mechanisms of fungal community assembly and co-occurrence patterns, which are important for understanding the maintenance mechanisms of fungal community diversity and ecological remediation of tailings-contaminated soils.

Simultaneous Measurement of Magnetic Field and Temperature Utilizing Magnetofluid-Coated SMF-UHCF-SMF Fiber Structure.

We have proposed and experimentally demonstrated a dual-parameter optical fiber sensor for simultaneous measurement of magnetic field and temperature. The sensor is a magnetofluid-coated single-mode fiber (SMF)-U-shaped hollow-core fiber (UHCF)-single-mode fiber (SMF) (SMF-UHCF-SMF) fiber structure. Combined with the intermodal interference and the macro-bending loss of the U-shaped fiber structure, the U-shaped fiber sensor with different bend diameters was investigated. In our experiments, the transmission spectra of the sensor varied with magnetic field strength and temperature around the sensing structure, respectively. The dip wavelengths of the interference spectra of the proposed sensor exhibit red shifts with magnetic field strength and temperature, and the maximum sensitivity of magnetic field strength and temperature were 1.0898 nm/mT and 0.324 nm/°C, respectively.

Simultaneous Measurement of Refractive Index and Temperature Based on SMF-HCF-FCF-HCF-SMF Fiber Structure.

In this research, we proposed and experimentally verified a compact all-fiber sensor that can measure refractive index (RI) and temperature simultaneously. Two segments of hollow-core fiber (HCF) are connected to the two ends of the four-core fiber (FCF) as a beam splitter and a coupler, and then spliced with two sections of single-mode fibers (lead-in and lead-out SMF), respectively. The two hollow-core fibers can excite the higher-order modes of the four-core fiber and recouple the core modes and higher-order modes into the outgoing single-mode fiber, thereby forming inter-mode interference. The different response sensitivities of two interference dips to RI and temperature manifest that the proposed structure can achieve simultaneous measurement. From the experimental results, it can be seen that the maximum sensitivity of the sensor to RI and temperature is 275.30 nm/RIU and 94.4 pm/°C, respectively. When the wavelength resolution is 0.02 nm, the RI and temperature resolutions of the sensor are 7.74 × 10-5 RIU and 0.335 °C. The proposed dual-parameter optical sensor has the advantages of high sensitivities, good repeatability, simple fabrication, and structure. In addition, it has potential application value in multi-parameter simultaneous measurement.

Simulation Study of High Sensitivity Fiber SPR Temperature Sensor with Liquid Filling.

In this paper, a high sensitivity fiber temperature sensor based on surface plasmon resonance is designed and studied. In the simulation, the single mode fiber is polished to remove most of the cladding, and then gold and silver films are added. Finally, it is embedded in the heat shrinkable tube filled with a thermo-optic coefficient liquid for curing. The numerical simulation results show that the sensing characteristics are sensitive to the remaining cladding thickness of the fiber, the thickness of the gold film and the thickness of the silver film. When the thermo-optic coefficient of the filling liquid is -2.8 × 10-4/°C, the thickness of the gold film, the thickness of the silver film and the thickness of the remaining cladding of the fiber are 30 nm, 20 nm and 1 µm, respectively. The sensitivity of the sensor designed in this paper can reach -6 nm/°C; this result is slightly higher than that of similar research in recent years. It will have a promising application prospect in flexible wearable temperature sensors, smart cities and other fields.

Integrated Multifunctional Graphene Discs 2D Plasmonic Optical Tweezers for Manipulating Nanoparticles.

Optical tweezers are key tools to trap and manipulate nanoparticles in a non-invasive way, and have been widely used in the biological and medical fields. We present an integrated multifunctional 2D plasmonic optical tweezer consisting of an array of graphene discs and the substrate circuit. The substrate circuit allows us to apply a bias voltage to configure the Fermi energy of graphene discs independently. Our work is based on numerical simulation of the finite element method. Numerical results show that the optical force is generated due to the localized surface plasmonic resonance (LSPR) mode of the graphene discs with Fermi Energy Ef = 0.6 eV under incident intensity I = 1 mW/µm2, which has a very low incident intensity compared to other plasmonic tweezers systems. The optical forces on the nanoparticles can be controlled by modulating the position of LSPR excitation. Controlling the position of LSPR excitation by bias voltage gates to configure the Fermi energy of graphene disks, the nanoparticles can be dynamically transported to arbitrary positions in the 2D plane. Our work is integrated and has multiple functions, which can be applied to trap, transport, sort, and fuse nanoparticles independently. It has potential applications in many fields, such as lab-on-a-chip, nano assembly, enhanced Raman sensing, etc.

On-Chip Photon Angular Momentum Absolute Measurement Based on Angle Detection.

Photon angular momentum (AM) has been widely studied due to its unique properties. The accurate detection of photon AM is very important in its wide applications. Though various on-chip AM detectors based on surface plasmon polaritons (SPPs) have been proposed, most of them can only realize relative measurement. For example, most photon orbital angular momentum (OAM) detectors measure the high order OAM via measuring the relative interval between the intensity spots of the SPPs excited by the target order OAM beam and the reference order (usually 0th order) OAM beam. In this paper, we propose a simple on-chip photon AM detector. It can realize absolute measurement of photon OAM via angle detection, whose measurement result does not depend on the measurement of any reference OAM beam. At the same time, it can also recognize photon spin angular momentum (SAM). The proposed detector provides a new way for absolute measurement of photon AM, which may have some potential applications in the field of integrated photonic device.