[Analysis of phthalate esters from vegetable oils by gas chromatography-mass spectrometry coupled with headspace solid-phase microextraction using cyclodextrin-based hypercrosslinked polymer coated fiber].

Phthalate esters (PAEs) are used as additives to enhance the pliability and malleability of plastics. These substances frequently migrate from packaging materials to vegetable oils because of the absence of covalent bonds. Over time, this migration could result in the accumulation of PAEs in the human body through ingestion, contributing to various diseases. Therefore, accurate qualitative and quantitative analyses of PAEs in vegetable oils are imperative to assess the origins of contamination and investigate their toxicity, degradation, migration, and transformation patterns. However, the concentration of PAEs in most samples is low, and the composition of vegetable oils is complex. Thus, PAEs must be enriched and purified using appropriate sample pretreatment procedures before analysis. Common methods for pretreating PAEs in oil include solid-phase extraction (SPE), dispersive SPE, and magnetic SPE. These techniques require time-consuming and labor-intensive procedures such as oil dissolution, solvent extraction, and degreasing. These approaches also require numerous solvents and containers, increasing the risk of sample cross-contamination. Solid-phase microextraction (SPME) integrates sampling, extraction, purification, concentration, and injection into a single process, significantly accelerating analytical testing and reducing the potential for sample cross-contamination. In headspace (HS) mode, the analytes achieve equilibrium on the coating and are extracted in the gas phase. The fibers are shielded from nonvolatile and high-relative molecular mass substances in the sample matrix. Thus, SPME is an ideal method for extracting volatile compounds in vegetable oils. When HS-SPME coupled with gas chromatography-mass spectrometry (GC-MS), it can achieve the rapid screening of PAEs in vegetable oil. In this study, an SPME with cyclodextrin-based hypercrosslinked polymers (BnCD-HCP) coated on stainless steel fibers was employed to extract PAEs from vegetable oil. The structure and morphology of the polymers were characterized using Fourier-transform infrared spectroscopy, nuclear magnetic spectroscopy, and scanning electron microscopy. BnCD-HCP exhibited high stability and diverse interactions, including π-π, hydrophobic, and host-guest interactions. The oil samples were incubated with methanol, and the PAEs were extracted from the headspace using the probe. The optimal extraction parameters included an extraction time of 20 min, extraction temperature of 50 ℃, desorption time of 4 min, and desorption temperature of 275 ℃. The BnCD-HCP/HS-SPME method was evaluated under optimized experimental conditions. The limits of detection (LODs) and quantification (LOQs) were determined by applying signal-to-noise ratios (S/N) of 3 and 10, respectively. Method accuracy was evaluated using relative standard deviations (RSDs). Single-needle precision was evaluated by conducting three consecutive analyses at 3 h intervals within a day. Inter-needle precision was assessed by conducting the same analyses (three replicates) with differently coated fibers. The 12 PAE compounds exhibited good linearity with correlation coefficients (R2) of at least 0.99. The LODs and LOQs ranged from 0.21 to 3.74 µg/kg and from 0.69 to 12.34 µg/kg, respectively. The RSDs were in the range of 1.8%-11.4% and 5.1%-13.9% for the single-needle and needle-to-needle methods, respectively. The proposed method was applied to soybean, peanut, and sunflower oils, and two PAEs were found in all three oils. Moreover, the method demonstrated good precision (RSD=1.17%-11.73%) and recoveries (72.49%-124.43%). Compared with other methods, the developed method was able to extract many target analytes and had a low or comparable LOD and high recovery. More importantly, this method does not require tedious operations such as solvent extraction and purification. Consequently, the developed method can be used to extract not only PAEs in oils but also other substances with a high lipid content.

Hydrophilic interaction chromatographic evaluation of zwitterionic polymer grafted silica gel via multiple binding sites.

A novel zwitterionic polymer grafted silica stationary phase, Sil-PZIC, was prepared by bonding poly(ethylene maleic anhydride) molecules on the surface of silica via multiple binding sites, followed by ammonolysis of maleic anhydride through a nucleophilic substitution reaction with ethylenediamine. The stationary phase was characterized by solid-state 13C nuclear magnetic resonance, zeta potential, and elemental analysis and the results show the successful encapsulation of zwitterionic polymer on the surface of silica. The chromatographic performance of Sil-PZIC was investigated by using nucleosides and nucleic bases as test analytes The variation of retention and separation performance of these model compounds were investigated by varying the chromatographic conditions such as the components of mobile phase, salt concentration, and pH. The results show that the retention of the Sil-PZIC phase was dominated by a hydrophilic partitioning mechanism accompanied by secondary interactions such as electrostatic and hydrogen bonding. In addition, saccharides and Amadori compounds were also well separated on the Sil-PZIC, indicating that the Sil-PZIC column has potential application for separation of the polar compound.

Evaluating the fire resistance and durability of cotton textiles treated with a phosphoramide phosphorus ester phosphate ammonium flame retardant.

The phosphoramide phosphorus ester phosphate ammonium (PPEPA) flame retardant was synthesized by phosphorus oxychloride and ethanolamine, and its structure was characterized by nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). Cotton textiles treated with 20 wt% PPEPA (CT-PPEPA3) would have high durability and flame retardance. The limiting oxygen index (LOI) of CT-PPEPA3 was found to be 46.5 %, while after undergoing 50 laundering cycles (LCs) following the AATCC 61-2013 3 A standard, the LOI only decreased to 31.4 %. Scanning electron microscopy and X-ray diffraction analyses suggested the penetration of PPEPA molecules into the interior of cotton fibers, resulting in a minor alteration of the cellulose crystal structure. The excellent durability, FTIR, and energy-dispersive X-ray of CT-PPEPA3 provided evidence for the formation of -N-P(=O)-O-C- and -O-P(=O)-O-C- covalent bonds between the PPEPA molecules and cellulose. The -N-P(=O)-O-C- bond exhibited a p-π conjugation effect, leading to enhanced stability and improved durability of the flame-retardant cotton textiles. Vertical flame, thermogravimetric, and cone calorimetry tests demonstrated that the CT-PPEPA3 underwent condensed-phase and synergistic flame retardation. Additionally, these finished cotton textiles retained adequate breaking strength and softness, making them suitable for various applications. In conclusion, the incorporation of the -N-P(=O)-ONH4 group into the phosphorus ester phosphate ammonium flame retardant demonstrated effective enhancement of the fire resistance and durability of treated cotton textiles.

A cationic, durable, P/N-containing starch-based flame retardant for cotton fabrics.

A cationic, durable flame retardant for cotton fabrics, 6-(2-(dimethoxy phosphoryl)-2-(trimethyl ammonium)) methoxy-2-methoxy-polysaccharide ammonium phosphate (DTPAP), was synthesized. Its structure was verified by NMR and FTIR spectroscopy. According to the FTIR spectra and X-ray photoelectron spectroscopy (XPS), DTPAP formed P(=O)-O-C bonds with cellulose molecules and firmly grafted to cotton fabrics, giving the fabric a high durability. DTPAP-25-treated fabrics passed the vertical flame test (VFT), and the limiting oxygen index (LOI) was 43.9 %. After 50 laundering cycles (LCs), the DTPAP-25-treated fabrics had an LOI of 29.9 %, passed the VFT, and retained their flame retardancy. EDS data showed that, compared with engrafted cationic ammonium phosphate flame retardants, the DTPAP-treated fabrics contained fewer metal ions. Cone calorimetry data showed that DTPAP-25-treated fabrics did not display concentrated heat release. The results suggested that DTPAP exhibited a condensed-phase flame retardant mechanism, and the introduction of cations into the ammonium phosphate flame retardant reduced ion exchange, which improved the durability.

Synthesis and evaluation of an eco-friendly and durable flame-retardant cotton fabrics based on a high-phosphorous-content.

Cotton fabrics are extremely flammable. Therefore, ammonium salt of dipentaerythritol hexaphosphoric acid (ADPHPA), a novel reactive phosphorus flame retardant without halogen and formaldehyde, was synthesized by solvent-free synthesis method. Surface chemical graft modification was chosen to introduce flame retardant, imparting its flame retardancy and washability. SEM indicated that ADPHPA entered the interior of cotton fiber, which was grafted with OH of control cotton fabrics (CCF) by forming POC covalent bonds to obtain treated cotton fabrics (TCF). There were no apparent differences in the fiber morphology and crystal structure after treatment according to SEM and XRD analysis. TG analysis demonstrated that the decomposition process of TCF was changed compared with CCF, while lower heat release rate and total heat release of TCF indicated its combustion efficiency was also reduced based on cone calorimetry test. Meanwhile, in the durability test, TCF had undergone 50 laundering cycles (LCs) in accordance with AATCC-61-2013 3A standard and had a short vertical combustion charcoal length, which were able to be regard as durable flame-retardant fabrics. The mechanical properties of TCF decreased to a degree, but did not affect the actual use of cotton fabrics. Taken as a whole, ADPHPA has research significance and development potential as a durable phosphorus-based flame retardant.

Postoperative delirium after long-term general anesthesia in elderly patients, how to reduce it?: Protocol of a double-blinded, randomized, placebo-controlled trial.

BACKGROUND: Long operation duration (>4 hours' anesthesia) of laparotomy in elderly patients would increase the risk of postoperative delirium (POD), which is characterized by acute cognitive dysfunction, changes in the level of consciousness, obvious attention disorder, emotional disorder, and sleep-waking cycle disorder. The occurrence of POD is closely related to the risk of death, and it will also seriously affect the cognitive function of patients, prolong postoperative hospital stays, and increase medical expenses. It is known that dexmetomidine could function in sedation, analgesia and anti-sympathetic effect, and it also could simulate the normal sleep state of human body, but there is still a lack of clinical study of dexmedetomidine on the incidence of POD in elderly patients undergoing long-term general anesthesia in laparotomy. METHODS: This is a single-center, double-blinded, randomized controlled study. With the approval of the Ethics Committee of Chongqing Shapingba District People's Hospital, participants who meet the requirements will be randomly divided into the treatment group (continuous infusion of dexmetomidine) and the control group (continuous infusion of 0.9% sodium chloride solution) in a ratio of 1:1. The incidence of delirium, cognitive function score, inflammatory factors, and adverse reactions will be evaluated after the operation. Finally, the data will be analyzed by SPSS 22.0. CONCLUSION: The results of this study will explore the efficacy and safety of dexmetomidine in reducing the incidence of postoperative delirium in elderly patients undergoing long-term general anesthesia in laparotomy. TRIAL REGISTRATION: OSF Registration number: DOI 10.17605/OSF.IO/2GJY6.