Indoor feeding combined with restricted grazing time improves body health, slaughter performance, and meat quality in Huang-huai sheep.

OBJECTIVE: The aim of this study was to evaluate the effects of three feeding systems, i.e., indoor feeding (CON), indoor feeding with 4-h daily access to grazing artificial pasture (ITGP), and indoor feeding with 8-h daily access to grazing artificial pasture (IEGP), on the plasma antioxidant and immunological capacity, slaughter characteristics, meat quality and economic efficiency of Huang-huai lambs. METHODS: Thirty-three healthy Huang-huai rams with similar body weight (approximately 5 mo of age, 28.96±1.01 kg) were assigned equally to three experimental groups. When finished fattening, six lambs from each group were collect blood samples for plasma analyses and then slaughtered to determine slaughter characteristics and obtain biceps brachii muscle for further analysis of meat quality and fatty acid profile. RESULTS: Compared to CON group, animals submitted to ITGP and IEGP groups resulted in greater contents of serum glutathione peroxidase, immunoglobulins (IgA, IgG, and IgM), polyunsaturated fatty acids (PUFA), n-6 PUFA, and PUFA/saturated fatty acid (FA) ratio and lower palmitic /oleic acid ratio (p<0.05). Moreover, animals in ITGP group exhibited a higher (p<0.05) loin eye area, content of meat crude protein (CP), and eicosetrienoic acid compared to CON group, while slaughter performance was superior (p<0.05) to that of the IEGP group. The economic efficiency of ITGP group was 70.12% higher than that of CON group, while the IEGP group exhibited a decrease of 92.54% in economic efficiency compared to the CON group. CONCLUSION: Restricted grazing time combined with indoor feeding was more effective in conferring superior body health, carcass traits and economic efficiency in Huang-huai lambs, as well as higher CP content and healthier FA composition in the resulting meat.

Feeding regimens affecting carcass and quality attributes of sheep and goat meat - A comprehensive review.

Sheep and goats can efficiently convert low quality forage into high-quality meat which contains specific nutrients and quality traits. Carcass traits and quality attributes of sheep and goat meat depend upon several factors and one of most effective strategies amongst these is feeding regimens. In this review, the major aspects of feeding regimens affecting growth rate, carcass traits and quality attributes of sheep and goat meat are thoroughly discussed, with a particular focus on physical-chemical composition, flavor profile, and fatty acid (FA) profile. Grazing lambs and kids receiving concentrate or under stall-feeding systems had greater average daily gain and carcass yield compared with animals reared on pasture only. However, growth rate was higher in lambs/kids grazing on pastures of improved quality. Moreover, the meat of grazing lambs receiving concentrate had more intense flavor, intramuscular fat (IMF) content, and unhealthy FA composition, but comparable color, tenderness, juiciness, and protein content compared to that of lambs grazed on grass only. In contrast, meat of concentrate-fed lambs had more intense color, greater tenderness and juiciness, IMF and protein contents, and lower flavor linked to meat. Additionally, the meat of kids grazed on concentrate supplementation had higher color coordinates, tenderness, IMF content and unhealthy FA composition, whereas juiciness and flavor protein content were similar. In contrast, kids with concentrate supplementation had superior color coordinates, juiciness, IMF content and unhealthy FA composition, but lower tenderness and flavor intensity compared to pasture-grazed kids. Thus, indoor-finished or supplemented grazing sheep/goats had higher growth rate and carcass quality, higher IMF content and unhealthy FA composition compared to animals grazed on grass only. Finally, supplementation with concentrate increased flavor intensity in lamb meat, and improved color and tenderness in kid meat, whereas indoor-fed sheep/goats had improved color and juiciness as well as reduced flavor compared to pasture-grazed animals.

How does the temporal relationship between ecosystem services and human wellbeing change in space and time? Evidence from Inner Mongolian drylands.

Studies of the ecosystem services (ES) and human wellbeing (HWB) relationship have proliferated in recent decades, but few have examined how ES affect HWB over time in a region (i.e., the temporal ES-HWB relationship) and how this relationship varies between regions. Thus, this study was intended to address these questions using data from Inner Mongolia. We first quantified multiple indicators of ES and objective HWB from 1978 to 2019, and then quantified their temporal relationship with correlation analysis over the entire duration and during four development periods, respectively. Our results showed that, depending on the time periods of analysis, geographic locations, and indicators, the temporal ES-HWB relationship varied substantially in both correlation strength and directionality (r values ranged from -0.93 to +1). Specifically, food-related provisioning services and cultural services often showed significant positive relationships with income, consumption, and basic living needs (r values ranged from +0.43 to +1), but erratic relationships with equity, employment, and social relationships (r values ranged from -0.93 to +0.96). Also, the positive correlations between food-related provisioning services and HWB were generally weaker in the urbanized regions. Cultural services and HWB were more strongly correlated in later development periods, whereas the relationship between regulating services and HWB was quite variable in space and time. The variations in the relationship over different development periods may be attributable to changing environmental and socioeconomic conditions, while the variations between regions were likely due to spatial heterogeneity of influencing factors. Our findings have an important policy implication for Inner Mongolia and beyond: sustainable management based on the ES and HWB relationship must be temporally adaptive and spatially tailored.

[Effect and mechanism of ultraviolet-cross-linkable chitosan-carbon dots-morin hydrogel treating for rat cartilage injury].

Objective: To construct a ultraviolet-cross-linkable chitosan-carbon dots-morin (NMCM) hydrogel, observe whether it can repair cartilage injury by in vivo and in vitro experiments, and explore the related mechanism. Methods: The chitosan was taken to prepare the ultraviolet (UV)-cross-linkable chitosan by combining methacrylic anhydride, and the carbon dots by combining acrylamide. The two solutions were mixed and added morin solution. After UV irradiation, the NMCM hydrogel was obtained, and its sustained release performance was tested. Chondrocytes were separated from normal and knee osteoarticular (KOA) cartilage tissue donated by patients with joint replacement and identified by toluidine blue staining. The 3rd generation KOA chondrocytes were co-cultured with the morin solutions with concentrations of 12.5, 25.0, 50.0 µmol/L and NMCM hydrogel loaded with morin of the same concentrations, respectively. The effects of morin and NMCM hydrogel on the proliferation of chondrocytes were detected by cell counting kit 8 (CCK-8). After co-cultured with NMCM hydrogel loaded with 50 µmol/L morin, the level of collagen type Ⅱ (COL-Ⅱ) of KOA chondrocytes was detected by immunofluorescence staining, and the level of reactive oxygen species (ROS) was detected by 2, 7-dichlorodihydrofluorescein diacetate (DCFH-DA) probe. Twenty 4-week old Sprague Dawley rats were selected to construct a articular cartilage injury of right hind limb model, and were randomly divided into two groups ( n=10). The cartilage injury of the experimental group was repaired with NMCM hydrogel loaded with 25 µmol/L morin, and the control group was not treated. At 4 weeks after operation, the repair of cartilage injury was observed by micro-CT and gross observation and scored by the International Cartilage Repair Association (ICRS) general scoring. The cartilage tissue and subchondral bone tissue were observed by Safranine-O-fast green staining and COL-Ⅱ immunohistochemistry staining and scored by ICRS histological scoring. The expressions of tumor necrosis factor α (TNF-α), nuclear factor κB (NK-κB), matrix metalloproteinase 13 (MMP-13), and COL-Ⅱ were detected by Western blot and real-time fluorescence quantitative PCR. Results: NMCM hydrogels loaded with different concentrations of morin were successfully constructed. The drug release rate was fast in a short period of time, gradually slowed down after 24 hours, and the amount of drug release was close to 0 at 96 hours. At this time, the cumulative drug release rate reached 88%. Morin with a concentration ≤50 µmol/L had no toxic effect on chondrocytes, and the proliferation of chondrocytes improved under the intervention of NMCM hydrogel ( P<0.05). NMCM hydrogel loaded with morin could increase the level of COL-Ⅱ in KOA chondrocytes ( P<0.05) and reduce the level of ROS ( P<0.05), but it did not reach the normal level ( P<0.05). Animal experiments showed that in the experimental group, the articular surface was rough and the defects were visible at 4 weeks after operation, but the surrounding tissues were repaired and the joint space remained normal; in the control group, the articular surface was rougher, and no repair tissue was found for cartilage defects. Compared with the control group, the experimental group had more chondrocytes, increased COL-Ⅱ expression, and higher ICRS gross and histological scores ( P<0.05); the relative expressions of MMP-13, NF-κB, and TNF-α protein and mRNA significantly decreased ( P<0.05), and the relative expressions of COL-Ⅱ protein/COL-2a1 mRNA significantly increased ( P<0.05). Conclusion: NMCM hydrogel can promote chondrocytes proliferation, down regulate chondrocyte catabolism, resist oxidative stress, protect chondrocytes from cartilage injury, and promote cartilage repair.

How does the local-scale relationship between ecosystem services and human wellbeing vary across broad regions?

Recent studies have shown that the relationships between ecosystem services (ES) and human wellbeing (HWB) can be positive, negative, or non-existent, but the underlying causes and processes remain unclear. This study aimed to investigate how and why the local level ES-HWB relationship would change geospatially and manifest on broad regions. Using data for Mainland China, we first calculated seven ES and Human Development Index (an indicator of HWB), then used geographically weighted regression and cluster analysis to quantify the county-level ES-HWB relationship, and finally adopted Wilcoxon test and random forest to investigate key influencing factors. We found that (1) the local-scale relationship between ES and HWB exhibited a great deal of spatial heterogeneity, varying from positive to negative or no correlations across broad regions; (2) the varying relationships merged spatially into three general types of regions: Positive Correlation-Dominant Region, Negative Correlation-Dominant Region, and No Correlation-Dominant Region; and (3) the variations and spatial patterns of the ES-HWB relationships were influenced by a number of social-ecological factors (e.g., population density and land cover compositions), and generally corresponded to different stages of land use transition and socioeconomic development: a positive ES-HWB relationship was found mainly in socioeconomically underdeveloped (rural or agricultural) regions with low ES production levels; a negative ES-HWB relationship occurred mostly in intermediately developed regions with abundant non-food ES; and ES and HWB had no relationships in socioeconomically well-developed (intensive agriculture/urbanized) societies with ample provisioning ES. These findings suggest that neither the "environmentalist's paradox" nor the "environmentalist's expectation" adequately accounts for the complexity of the ES-HWB relationship.

Integrated Bioinformatics Analyses of PIN1, CKX, and Yield-Related Genes Reveals the Molecular Mechanisms for the Difference of Seed Number Per Pod Between Soybean and Cowpea.

There is limited advancement on seed number per pod (SNPP) in soybean breeding, resulting in low yield in China. To address this issue, we identified PIN1 and CKX gene families that regulate SNPP in Arabidopsis, analyzed the differences of auxin and cytokinin pathways, and constructed interaction networks on PIN1, CKX, and yield-related genes in soybean and cowpea. First, the relative expression level (REL) of PIN1 and the plasma membrane localization and phosphorylation levels of PIN1 protein were less in soybean than in cowpea, which make auxin transport efficiency lower in soybean, and its two interacted proteins might be involved in serine hydrolysis, so soybean has lower SNPP than cowpea. Then, the CKX gene family, along with its positive regulatory factor ROCK1, had higher REL and less miRNA regulation in soybean flowers than in cowpea ones. These lead to higher cytokinin degradation level, which further reduces the REL of PIN1 and decreases soybean SNPP. We found that VuACX4 had much higher REL than GmACX4, although the two genes essential in embryo development interact with the CKX gene family. Next, a tandem duplication experienced by legumes led to the differentiation of CKX3 into CKX3a and CKX3b, in which CKX3a is a key gene affecting ovule number. Finally, in the yield-related gene networks, three cowpea CBP genes had higher RELs than two soybean CBP genes, low RELs of three soybean-specific IPT genes might lead to a decrease in cytokinin synthesis, and some negative and positive SNPP regulation were found, respectively, in soybean and cowpea. These networks may explain the SNPP difference in the two crops. We deduced that ckx3a or ckx3a ckx6 ckx7 mutants, interfering CYP88A, and over-expressed DELLA increase SNPP in soybean. This study reveals the molecular mechanism for the SNPP difference in the two crops, and provides an important idea for increasing soybean yield.

Integrated Transcriptomic and Bioinformatics Analyses Reveal the Molecular Mechanisms for the Differences in Seed Oil and Starch Content Between Glycine max and Cicer arietinum.

The seed oil and starch content of soybean are significantly different from that of chickpea. However, there are limited studies on its molecular mechanisms. To address this issue, we conducted integrated transcriptomic and bioinformatics analyses for species-specific genes and acyl-lipid-, starch-, and carbon metabolism-related genes. Among seven expressional patterns of soybean-specific genes, four were highly expressed at the middle- and late oil accumulation stages; these genes significantly enriched fatty acid synthesis and carbon metabolism, and along with common acetyl CoA carboxylase (ACCase) highly expressed at soybean middle seed development stage, common starch-degrading enzyme beta-amylase-5 (BAM5) was highly expressed at soybean early seed development stage and oil synthesis-related genes ACCase, KAS, KAR, ACP, and long-chain acyl-CoA synthetase (LACS) were co-expressed with WRI1, which may result in high seed oil content and low seed starch content in soybean. The common ADP-glucose pyrophosphorylase (AGPase) was highly expressed at chickpea middle seed development stage, along with more starch biosynthesis genes co-expressed with four-transcription-factor homologous genes in chickpea than in soybean, and the common WRI1 was not co-expressed with oil synthesis genes in chickpea, which may result in high seed starch content and low seed oil content in chickpea. The above results may be used to improve chickpea seed oil content in two ways. One is to edit CaWRI1 to co-express with oil synthesis-related genes, which may increase carbon metabolites flowing to oil synthesis, and another is to increase the expression levels of miRNA159 and miRNA319 to inhibit the expression of MYB33, which may downregulate starch synthesis-related genes, making more carbon metabolites flow into oil synthesis. Our study will provide a basis for future breeding efforts to increase the oil content of chickpea seeds.

Microscopic insights into water adsorption in carbon nanopores - the role of acidic and basic functional groups and their configurations.

Functional groups (FGs) in porous carbon play a pivotal role in water adsorption by nucleating water clusters followed by their coalescence, the process in which precursors are used for filling the confined space typically in the reduced pressure range of 0.3-0.8. While the general role of FGs is known, different types of FGs and their configurations are expected to critically affect the formation of clusters and they are yet to be clarified. To this end, we conducted a comprehensive Monte Carlo simulation of water adsorption at 298 K in a functionalized graphitic slit pore as a function of types of FGs (acidic and basic) and their configurations. The adsorption mechanism is derived from the analysis of adsorption/desorption isotherms, isosteric heat, and 2D density and compressibility distributions. Our results show that (1) with the increasing density of FGs, the isotherm switches from Type V to Type I and the precursor used for pore filling shifts from clustering to molecular layering, (2) the intra-rotation of atoms around the Sigma bonds in the FGs plays an important role in clustering when the FGs are in proximity and (3) for a given density of FGs, the configurations (interspacing distribution) of FGs dictate the shape and size of the water clusters, affecting the filling and emptying of water molecules from the confined space, which have practical implications in moisture control by solid adsorbents.

Competitive and Synergistic Adsorption of Mixtures of Polar and Nonpolar Gases in Carbonaceous Nanopores.

Most adsorption applications involve mixtures, yet accurate predictions of the adsorption of mixtures remain challenging, in part due to the inability to account for the interplay between adsorbate-adsorbate and adsorbate-adsorbent interactions. This study involves a comprehensive Monte Carlo simulation of the adsorption of two groups of mixtures (namely, supercritical and subcritical ones) in carbon nanopores and quantifies Henry's constants, isotherms, energetics, and density distributions in the pores. When interadsorbate interactions are negligible (e.g., in supercritical mixtures such as mixtures of nonpolar gases), adsorbates behave like ideal gases and the adsorption isotherm can be predicted with the ideal adsorbed solution theory (IAST). However, when interadsorbate interactions become significant, IAST fails. This study reveals that (1) in mixtures of polar and nonpolar gases, the stronger intermolecular interaction for the polar constituent leads to synergistic adsorption that causes the nonpolar adsorbate to desorb and (2) for mixtures of polar gases, such as ethanol and water, the adsorbate-adsorbate interactions are so dominant that the unfavorable adsorbate-adsorbent interactions are overcome, such that water adsorbs onto the hydrophobic adsorbent. The competitive and synergistic interactions highlighted here are expected to be valuable in enhancing gas separations.

Bacterial community in commercial airliner cabins in China.

Considering the amount of time that crew members and passengers spend on airliners and the potential health impact of pathogenic bacteria, it is important to understand the population of bacteria inside airliners and the factors affecting the bacterial concentration. This study recorded the species of airborne and cabin surface culturable bacteria inside various airliner. Seven flights ranging from 3 to 5 hours in duration on different types of airliner were chosen. Multiple species of bacteria in the air of the airliners, such as Brachybacterium paraconglomeratum, were identified by means of the 16S ribosomal RNA gene sequencing method, and most of the bacteria were Gram-positive. This study found that the bacterial concentration in the airliners decreases as the relative humidity increases. The decrease in the number of airborne bacteria may be the reason for the reduced occurrence of unwanted symptoms exhibited by passengers.

Water adsorption on carbon - A review.

Water adsorption on carbonaceous materials has been studied increasingly in the recent years, not only because of its impact on many industrial processes, but also motivated by a desire to understand, at a fundamental level, the distinctive character of directional interactions between water molecules, and between water molecules and other polar groups, such as the functional groups (FGs) at the surfaces of graphene layers. This paper presents an extensive review of recent experimental and theoretical work on water adsorption on various carbonaceous materials, with the aim of gaining a better understanding of how water adsorption in carbonaceous materials relates to the concentration of FGs, their topology (arrangement of the groups) and the structure of the confined space in porous carbons. Arising from this review we are able to propose mechanisms for water adsorption in carbonaceous materials as the adsorbate density increases. The intricate interplay between the roles of FGs and confinement makes adsorption of water on carbon materials very different from that of other simple molecules.

On the microscopic origin of the temperature evolution of isosteric heat for methane adsorption on graphite.

Understanding methane adsorption is fundamental to understanding gas storage and gas separation technologies. Detailed analyses of methane adsorption on non-porous substrates are pivotal for understanding the intrinsic interactions between the methane molecule and the adsorbent. In this paper, we particularly address the isosteric heat, which is a crucial parameter that characterizes the energetics of such systems. We have used grand canonical Monte Carlo simulations to study methane adsorption on graphite over a range of temperatures (from 50 K to 110 K). Our simulation results show good agreement with experimental data for the 2D phase transition, the 2D triple and critical points in the first layer obtained from low energy electron diffraction, neutron scattering and heat capacity measurements. On the basis of this agreement, we present a detailed microscopic picture of isosteric heat and its evolution with temperature. Our results show that the origin of the cusp and spike in the isosteric heat curve and their shift with temperature are associated with the balance of entropic and enthalpic contributions between the first and second layer.

Risk assessment and uncertainty analysis of PAHs in the sediments of the Yangtze River Estuary, China.

To better explore the concentration of polycyclic aromatic hydrocarbons (PAHs) in the sediments of the Yangtze River Estuary (YRE), 16 priority PAHs were analyzed based on sampling data obtained in February 2011. The results showed that the total concentrations of PAHs in sediments of the YRE varied from 65.07 to 668.98ng·g-1. The results of toxic equivalent quantities of benzo[a]pyrene and the sediment quality guideline quotient suggested that PAHs had little or no adverse effects on the environment. The cancer risk results showed that the cancer risk at all sites exceeded 10-6, with 73% of sites exceeding 10-4, suggesting that people remain at risk of cancer as a result of their exposure to carcinogenic PAHs. However, the result of hazard index results showed that the non-cancer risks were substantially lower than one, indicating that PAHs in these sediments likely pose little or no adverse health threats to local inhabitants.