Eggshell membrane-mimicking multifunctional nanofiber for in-situ skin wound healing.

Eggshell membrane is a naturally-occurring protective barrier layer for chickens' incubation and shows the close similarity with extracellular matrix. To fully explore and utilize its' structure and active components via a mimicking way will be of great interest for wounds healing. Herein, the well-dispersed CuS nanoparticles were prepared by using eggshell membranes as templates with strong near-infrared absorption and photothermal properties. Furthermore, the as-prepared solution was combined with polyvinyl pyrrolidone and chitosan-derived fluorescent carbon dots for the mimetic synthesis of multifunctional nanofibrous membrane by a hand-held electrospinning device, which has the merits of in-situ operation, the extracellular matrix (ECM)-like architecture, hemostatic, radical scavenging, antibacterial, as well as accelerated healing of skin injury, etc. The electrospun-nanofiber membrane with optimal addition of 100 mg/L CuS nanoparticles was confirmed to be noncytotoxic on human fibroblasts and showed strong antibacterial activities against S. aureus and E. coli under NIR irradiation (980 nm). In addition, the radical scavenging ability was also proved by DPPH experiments. The animal experiments revealed that the nanofiber membrane could accelerate the wound healing process. The work lays down a simple and environmentally-friendly approach for the fabrication and development of promising wound healing materials in skin tissue engineering applications.

Electrochemiluminescence Immunosensor Based on Nanobody and Au/CaCO3 Synthesized Using Waste Eggshells for Ultrasensitive Detection of Ochratoxin A.

A novel ultrasensitive electrochemiluminescence (ECL) immunoassay based on Au/CaCO3 was proposed for detecting ochratoxin A (OTA) in coffee. Au/CaCO3 nanocomposites synthesized using waste eggshells as the template with a large surface area and excellent electrochemical properties were applied for immobilizing a large amount of Ru(bpy)3 2+ and conjugating a high-affinity nanobody (prepared by the phage display technique). Coupling of the Au/CaCO3 nanocomposites and nanobody technologies provided an ultrasensitive and highly selective ECL immunosensor for OTA detection in the range of 10 pg/mL-100 ng/mL with a low detection limit of 5.7 pg/mL. Moreover, the as-prepared ECL immunosensor showed excellent performance and high stability. Finally, the proposed ECL sensor was applied to analyze OTA in coffee samples, confirming the desirable accuracy and practical applicability potential. Overall, this work presents a new nanomaterial for fabricating the sensing interface of immunosensors by harnessing natural waste as the source and a method for detecting toxic OTA in foods.

Biochar-Supported Cu2+/Cu+ Composite as an Electrochemical Ultrasensitive Interface for Ractopamine Detection.

Ractopamine as an important ß-agonist is frequently found in pork to enhance food quality, which is harmful to human health. Thus, it is extremely important to develop an efficient analytical method to detect ractopamine for food safety control. Herein, we develop a kind of electrochemical biosensor using a biochar-supported Cu2+/Cu+ composite as an electrochemical sensing interface for detecting ractopamine. The electrochemical sensor combines the collective advantages of Nafion (enriches ractopamine and effectively shields the interference of negatively charged compounds), biochar (unique three-dimensional porous network structure to increase the contact area), and Cu2+/Cu+ (excellent electrical conductivity to speed up the charge transfer rate), which are beneficial to the accumulation and electrochemical sensing of targets on a Nafion-biochar-supported Cu2+/Cu+ electrode (NBC-GCE). The as-prepared sensor shows a good electrochemical sensing ability, with an ultralow detection limit and high sensitivity (0.041 µM and 416 µA·mM-1·cm-2, respectively), in the 0.1-1.75 µM range. In addition, the stability, repeatability, and anti-interference performance of the modified electrode are also satisfying. Last, its practicability is shown for assaying ractopamine in pork sausages. This research provides an environmentally friendly method to simultaneously treat food waste and achieve ultrasensitive detection of ractopamine in food.

Au nanoparticle-loaded eggshell for electrochemical detection of nitrite.

Eggshell is an extremely large source of domestic waste and has a huge scientific research potential because of its unique porous hierarchical structure. By converting eggshell waste into valuable functional materials, it can be recycled in many fields. Herein, we envisioned an economical and environmentally friendly conversion method for synthesizing Au nanoparticle loaded eggshell nanocomposites (defined as Au/CaCO3 nanocomposites) for the detection of trace amounts of nitrite in oolong tea. Compared with bare electrodes, the prepared Au/CaCO3 nanocomposite-based electrodes have obvious electrochemical enhancement behavior. A wide linear response range of 0.01 to 1.00 mM and a relatively low detection limit of 11.55 nM have been obtained in this study. The "turning waste into treasure" transformation strategy not only provides a practical and low-cost method for comprehensive utilization of eggshells as valuable functional materials, but also provides a new approach for sensitive detection of pollutants.

Plant-mediated synthesis of dual-functional Eggshell/Ag nanocomposites towards catalysis and antibacterial applications.

Advances in nanotechnology provide plenty of exciting solutions to environmental issues affecting air, soil as well as water. To solve the water pollution problem caused by organics and microorganisms, development of a simple, environment-friendly, and cheap method for the synthesis of nanomaterials is of paramount importance. Herein, we prepared a novel nanocomposite (named Eggshell/Ag) using waste eggshell as a support and Cacumen platycladi extract as reducing and stabilizing agents in aqueous solutions at room temperature. Biogenic-stabilized Ag nanoparticles (Ag NPs) with an average diameter of 60 nm were well-dispersed on the surface of eggshells, exhibiting dual-functional properties of organics catalytic degradation and bacterial growth inhibition. Through five repeated assays, it was established that the reduction efficiency of the nanocomposite for 4-nitrophenol (4-NP) was high. The reduction could be completed rapidly at room temperature. Moreover, significant inhibition zones were observed for Staphylococcus aureus (S. aureus) agar plates and Escherichia coli (E. coli). Meanwhile, the minimum inhibition concentrations (MIC) were determined to be 0.08 and 0.04 mg mL-1, respectively, while the minimum bactericidal concentration (MBC) was measured as 0.64 mg mL-1. The biogenic Eggshell/Ag nanocomposites are promising candidates for a series of applications in the fields of biomedicine, environment as well as energy.

Responses of crop growth and water productivity to climate change and agricultural water-saving in arid region.

Climate change and associated elevated atmospheric CO2 concentration and rising temperature have become a great challenge to agricultural production especially in arid and semiarid regions, and a great concern to scientists worldwide. Thus, it is very important to assess the response of crop growth and water productivity to climate change projections, which in turn can help devise adaptive strategies to mitigate their impact. An agro-hydrological model with well consideration of CO2 effects on both the stomatal conductance and leaf area was established. The model was well calibrated and validated using the data collected from the middle oasis of Heihe River basin, northwest China, which was selected as a typical arid region. Simulations of soil water contents and crop growth matched well with observations. Then various scenarios were designed with considering three climate change alternatives (RCP 2.6, RCP 4.5 and RCP 8.5) and three agricultural water-saving alternatives in the context of irrigation water availability being constant. Responses of crop growth and water productivity were predicted for thirty years from 2018 to 2047. As compared to current situation, there would be a reduction of 3.4-8.6% in crop yield during the period of 2018-2027 and an increase of 1.5-18.7% in crop yield during the period of 2028-2047 for seed corn, and an increase of 7.4-26.7% in crop yield during the period of 2018-2047 for spring wheat, respectively. Moreover, results showed an increase in water productivity ranged from 14.3% to 44.5% for seed corn and from 34.7% to 52.0% for spring wheat, respectively. Furthermore, adaptive strategies to climate change were recommended for the seed corn and spring wheat, respectively. Our results are expected to provide implications for devising adaptive strategies to changing environments in other arid and irrigation-fed areas.

Polymeric Encapsulation of Turmeric Extract for Bioimaging and Antimicrobial Applications.

As a herb of the ginger family, the turmeric plant has been used as spice and colorant in the Oriental countries. The rhizome part of the plant is rich in curcumin, which has been proven to be the main ingredient responsible for turmeric's biological effects. Most research endeavors have been upon the investigation of pharmaceutical activities of curcumin, yet the fluorescence of curcumin is a bit far from well-studied. The major drawbacks associated with curcumin are its poor aqueous solubility and low stability. In this communication, the encapsulation of fluorescent turmeric extract into polymeric nanoparticles (NPs) for bioimaging and antibacterial applications is reported. Through poly(d,l-lactic-co-glycolic acid) (PLGA) encapsulation, solubility of curcumin is greatly increased, and the biodegradable nature of PLGA further enhances the biocompatibility of curcumin. These Cur-PLGA NPs are successfully demonstrated to be efficient fluorescence probes for bioimaging, and promising for antibacterial application.

Graphene oxide wrapped with gold nanorods as a tag in a SERS based immunoassay for the hepatitis B surface antigen.

A composite consisting of graphene oxide and gold nanorods (GO-GNRs) was designed for the trace determination of hepatitis B surface antigen (HBsAg) using surface enhanced Raman spectroscopy (SERS). GO contains numerous carboxy and hydroxy groups on its surface and therefore can serve as the substrate for decoration with GNRs and for immobilizing antibody against HBsAg. The GNRs (carrying the SERS probe 2-mercaptopyridine) exhibit high SERS activity, and this improves the sensitivity of the biosensor. The antibody on the GO-GNRs binds HBsAg with high specificity, and it results in excellent selectivity. The SERS signal (measured at 1002 cm-1) increases in the 1-1000 pg·mL-1 HBsAg concentrations range, and the limit of detection is 0.05 pg·mL-1 (at an S/N ratio of 3). The immunoassay achieves the sensitive and selective determination of HBsAg in serum and expands the potential application of GO-GNR based SERS tag in clinical research. Graphical abstract A novel graphene oxide-gold nanorod (GO-GNRs) based surface-enhanced Raman scattering (SERS) tag for immunoassay was designed. It allows for sensitive and selective determination of HBsAg in serum. The method is expected to expand the potential application in the environment, in medicine and in food analysis.

Protein-templated Fe2O3 microspheres for highly sensitive amperometric detection of dopamine.

The authors describe an amperometric sensor for dopamine (DA) by employing olive-like Fe2O3 microspheres (OFMs) as the electrocatalyst for DA oxidization. The OFMs were prepared by using a protein templated method. The structure and properties of the OFMs were characterized by scanning electron microscopy, X-ray powder diffraction, energy dispersive x-ray spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The OFMs possess excellent catalytic activity towards DA oxidization due to their unique morphology. The sensor responds to DA within less than 5 s. The sensor, best operated at a voltage of +0.2 V (vs. SCE) responds linearly in the 0.2 to 115 µM DA concentration range and has a 30 nM detection limit. The selectivity, reproducibility and long-term stability of the sensor are acceptable. It performs well when applied to spiked human urine samples. Graphical abstract Olive-like Fe2O3 microspheres (OFMs), synthesized using egg white as template, display excellent catalytic activity towards dopamine (DA) oxidization due to their unique morphology. They were applied for DA detection using the amperometric technique. The electrochemical sensor exhibited a high sensitivity and a 30 nM detection limit. DAQ: dopaquinone.

Hyaluronic acid-grafted three-dimensional MWCNT array as biosensing interface for chronocoulometric detection and fluorometric imaging of CD44-overexpressing cancer cells.

A sandwich-type electrochemical cytosensor is described for quantitative determination of CD44-overexpressing HeLa cells. Hyaluronic acid (HA) acts as a targeting molecule that was in-situ incorporated into the sensor based on the use of an indium tin oxide (ITO) electrode modified with multi-walled carbon nanotubes (MWCNTs). The 3D-MWCNT structure is shown to strongly improve the electronic properties and surface chemical reactivities. The HA-modified sensor exhibits a highly sensitive response to HeLa cells. A sandwiched hybridization protocol was then established using BIO [an N-butyl-4-(6'-aminohexyl)amino-1,8-naphthalimide probe modified with HA] as the tracing labels of the fluorescent probes for targeting CD44-positive tumor cells. The signal amplification was thereby maximized and measured by chronocoulometry. The binding of CD44-positive HeLa cells to the HA modified sensing layer causes a decrease in chronocoulometric response. The signal decreases linearly in the 2.1 × 102 to 2.1 × 107 HeLa cells·mL-1 concentration range with a detection limit of 70 cells·mL-1. Such a sandwich-type assay may be tailored as a sensitive candidate for detecting low levels of tumor cells. Graphical abstract Schematic of a sandwich cytosensor based on hyaluronic acid-grafted 3D-MWCNT as biosensing interface and BIO as fluorescent probe. This biosensor possessed excellent electrochemical activity, high sensitivity and selectivity, providing a dynamical tracking and detecting platform for CD44-positive tumor cells.

Microwave assisted synthesis of luminescent carbonaceous nanoparticles from silk fibroin for bioimaging.

Bombyx mori silk as a natural protein based biopolymer with high nitrogen content, is abundant and sustainable because of its mass product all over the world per year. In this study, we developed a facile and fast microwave-assisted synthesis of luminescent carbonaceous nanoparticles using Bombyx mori silk fibroin and silk solution as the precursors. As a result, the obtained carbonaceous nanoparticles exhibit a photoluminescence quantum yield of ~20%, high stability, low cytotoxicity, high biocompatibility. Most importantly, we successfully demonstrated bioimaging using these luminescent carbonaceous nanoparticles with excitation dependent luminescence. In addition, the microwave-assisted hydrothermal method can be extended to convert other biomass into functional nanomaterials.

Organic Solid-State Tri-Wavelength Lasing from Holographic Polymer-Dispersed Liquid Crystal and a Distributed Feedback Laser with a Doped Laser Dye and a Semiconducting Polymer Film.

Organic solid-state tri-wavelength lasing was demonstrated from dye-doped holographic polymer-dispersed liquid crystal (HPDLC) distributed feedback (DFB) laser with semiconducting polymer poly[-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) and laser dye [4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran] (DCM) by a one-step holography technique, which centered at 605.5 nm, 611.9 nm, and 671.1 nm. The temperature-dependence tuning range for the tri-wavelength dye-doped HPDLC DFB laser was as high as 8 nm. The lasing emission from the 9th order HPDLC DFB laser with MEH-PPV as active medium was also investigated, which showed excellent s-polarization characterization. The diffraction order is 9th and 8th for the dual-wavelength lasing with DCM as the active medium. The results of this work provide a method for constructing the compact and cost-effective all solid-state smart laser systems, which may find application in scientific and applied research where multi-wavelength radiation is required.

Controlling Morphology and Aggregation in Semiconducting Polymers: The Role of Solvents on Lasing Emission in Poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene-vinylene].

Systematic experiments were performed to investigate solvent-dependent morphology and aggregation of the semiconducting polymer film poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV), which was span-cast from nonaromatic strong polarity solvents tetrahydrofuran (THF), trichloromethane (TCM) and aromatic weak polarity solvents chlorobenzene (CB), toluene, and p-xylene. The results indicated that the conformation of the spin-cast MEH-PPV films with weak aggregation such as THF and TCM demonstrated excellent lasing emission performances because of inhibiting the fluorescence quenching induced by bi-molecule process. The Atomic Force Microscope (AFM) images confirmed the distinct morphologies of the spin-cast MEH-PPV films. The amplified spontaneous emission (ASE) was investigated in a simple asymmetric slab planar waveguide structure by methods of variable stripe length (VSL) and shifting excitation stripe (SES). The amplified spontaneous emission (ASE) experiments confirmed the distinct polymer chain conformation. The conformation, which preserved from the spin-cast process, indicated the distinct interactions between solvents and MEH-PPV polymer chains. The pure film spectra were performed to confirm the effect of distinct conformation on the material energy level. This work provides insights into the morphology and aggregation effect of the spin-cast polymer films on the performances of lasers.

Electrospun nanofibers for wound healing.

Electrospinning has been widely used as a nanofiber fabrication technique. Its simple process, cost effectiveness and versatility have appealed to materials scientists globally. Pristine polymeric nanofibers or composite nanofibers with dissimilar morphologies and multidimensional assemblies ranging from one dimension (1D) to three dimensions (3D) can be obtained from electrospinning. Critically, these as-prepared nanofibers possessing high surface area to volume ratio, tunable porosity and facile surface functionalization present numerous possibilities for applications, particularly in biomedical field. This review gives us an overview of some recent advances of electrospinning-based nanomaterials in biomedical applications such as antibacterial mats, patches for rapid hemostasis, wound dressings, drug delivery systems, as well as tissue engineering. We further highlight the current challenges and future perspectives of electrospinning-based nanomaterials in the field of biomedicine.

pH-sensitive Au-BSA-DOX-FA nanocomposites for combined CT imaging and targeted drug delivery.

Albumin-based nanoparticles (NPs) as a drug delivery system have attracted much attention owing to their nontoxicity, non-immunogenicity, great stability and ability to bind to many therapeutic drugs. Herein, bovine serum albumin (BSA) was utilized as a template to prepare Au-BSA core/shell NPs. The outer layer BSA was subsequently conjugated with cis-aconityl doxorubicin (DOX) and folic acid (FA) to create Au-BSA-DOX-FA nanocomposites. A list of characterizations was undertaken to identify the successful conjugation of drug molecules and targeted agents. In vitro cytotoxicity using a cell counting kit-8 (CCK-8) assay indicated that Au-BSA NPs did not display obvious cytotoxicity to MGC-803 and GES-1 cells in the concentration range of 0-100 µg/mL, which can therefore be used as a safe drug delivery carrier. Furthermore, compared with free DOX, Au-BSA-DOX-FA nanocomposites exhibited a pH-sensitive drug release ability and superior antitumor activity in a drug concentration-dependent manner. In vivo computed tomography (CT) imaging experiments showed that Au-BSA-DOX-FA nanocomposites could be used as an efficient and durable CT contrast agent for targeted CT imaging of the folate receptor (FR) overexpressed in cancer tissues. In vivo antitumor experiments demonstrated that Au-BSA-DOX-FA nanocomposites have selective antitumor activity effects on FR-overexpressing tumors and no adverse effects on normal tissues and organs. In conclusion, the Au-BSA-DOX-FA nanocomposite exhibits selective targeting activity, X-ray attenuation activity and pH-sensitive drug release activity. Therefore, it can enhance CT imaging and improve the targeting therapeutic efficacy of FR-overexpressing gastric cancers. Our findings suggest that Au-BSA-DOX-FA nanocomposite is a novel drug delivery carrier and a promising candidate for cancer theranostic applications.

PCL-based thermo-gelling polymers for in vivo delivery of chemotherapeutics to tumors.

The synthesis of a multiblock poly(ether ester urethane)s comprising poly(ε-caprolactone), poly(ethylene glycol), and poly(propylene glycol) segments is described. We found that this polymer possessed a critical thermo-gelation concentration of 4wt%. Molecular characterization of the polymer was performed in terms of molecular weight determination, chemical composition elucidation and functional group determination using GPC, NMR, and FTIR. We carried out in vitro paclitaxel and doxorubicin release studies and demonstrated that sustained therapeutic release of about 2weeks can be obtained with this system. A nude mice model of tumor was developed and intratumoral injection of therapeutic-loaded thermo-gel demonstrated that PTX-loaded thermo-gel effectively inhibited the growth of tumors.

Label-Free 3D Ag Nanoflower-Based Electrochemical Immunosensor for the Detection of Escherichia coli O157:H7 Pathogens.

It is highly desirable to develop a rapid and simple method to detect pathogens. Combining nanomaterials with electrochemical techniques is an efficient way for pathogen detection. Herein, a novel 3D Ag nanoflower was prepared via a biomineralization method by using bovine serum albumin (BSA) as a template. It was adopted as a sensing interface to construct an electrochemical bacteria immunosensor for the rapid detection of foodborne pathogens Escherichia coli (E. coli) O157:H7. Bacterial antibody was immobilized onto the surface of Ag nanoflowers through covalent conjugation. Electrochemical impedance spectroscopy (EIS) was used to detect and validate the resistance changes, where [Fe(CN)6]3-/4- acted as the redox probe. A linear relation between R et and E. coli concentration was obtained in the E. coli concentration range of 3.0 × 102-3.0 × 108 cfu mL-1. The as-prepared biosensor gave rise to an obvious response to E. coli but had no distinct response to Cronobacter sakazakii, methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus albus, Lactobacillus easei, and Shigella flexneri, revealing a high selectivity for the detection of the pathogens down to 100 cfu mL-1 in a short time. We believe that this BSA-conjugated 3D Ag nanoflowers could be used as a powerful interface material with good conductivity and biocompatibility for improving pathogen detection and treatment in the field of medicine, environment, and food safety.

Study on nanobubble generation: saline solution/water exchange method.

In a recently introduced method for nanobubble generation, water is replaced with NaCl solution. It has the same mechanism as alcohol/water exchange: a liquid of higher gas solubility is used to replace one of lower gas solubility. Herein, the opposite process is realized by replacement of saline solutions with water. Interestingly, nanobubbles are also observed by AFM when different concentrations and valences of saline liquids are employed.

Understanding the stability of surface nanobubbles.

Surface nanobubbles emerging at solid-liquid interfaces show extreme stability. In this paper, the stability of surface nanobubbles in degassed water is discussed and investigated by AFM. The result demonstrates that surface nanobubbles are kinetically stable and the liquid/gas interface is gas impermeable. The force modulation experiment further proves that there is a layer coating on nanobubbles. These critical properties suggest that surface nanobubbles may be stabilized by a layer which has a great diffusive resistance.

Polymorphisms in thymidylate synthase and reduced folate carrier (SLC19A1) genes predict survival outcome in advanced non-small cell lung cancer patients treated with pemetrexed-based chemotherapy.

The aim of this study was to evaluate the association between thymidylate synthase (TS), methylenetetrahydrofolate reductase (MTHFR) and reduced folate carrier (SLC19A1) gene polymorphisms and the treatment efficacy of pemetrexed-based chemotherapy in advanced non-small cell lung cancer (NSCLC). Advanced NSCLC patients received pemetrexed and cisplatin every three weeks. Polymorphisms in the TS, MTHFR and SLC19A1 genes were detected in peripheral blood samples using DNA sequencing and Taqman PCR. An analysis of gene polymorphisms was performed with respect to the progression-free survival (PFS), response rate (RR) and overall survival (OS) of patients treated with pemetrexed. The median PFS times for patients with the TS 2R/2R, 2R/3C or 3C/3C genotypes were significantly longer than those of patients with the 2R/3G, 3C/3G or 3G/3G genotypes (P=0.036). Patients with the SLC19A1 CC genotype had a significantly longer median OS compared with individuals with the homozygous and heterozygous genotypes (12.2 vs. 8.9 and 7.3 months, respectively; P=0.022). The PFS and OS did not differ for the three genotypes of MTHFR assessed. The RR was higher in patients with the TS 2R/2R, 2R/3C or 3C/3C genotypes than in the other groups (P=0.044). The polymorphisms of the 5'-UTR of the TS gene and exon 6 (2522) C/T of the SLC19A1 gene predict the survival of advanced NSCLC patients treated with pemetrexed. However, a large scale clinical trial is required to validate these findings.