Structural asymmetry in FGF23 signaling.

Chen et al. have derived cryogenic electron microscopy (cryo-EM) structures of signaling complexes of the endocrine hormone fibroblast growth factor 23 (FGF23) with fibroblast growth factor receptor (FGFR), α-Klotho, and heparin sulfate. These structures are asymmetric, leading to questions concerning in vivo function, and will facilitate structure-based drug design to modulate FGF23 signaling.

Identification of Small-Molecule Inhibitors of Fibroblast Growth Factor 23 Signaling via In Silico Hot Spot Prediction and Molecular Docking to α-Klotho.

Fibroblast growth factor 23 (FGF23) is a therapeutic target for treating hereditary and acquired hypophosphatemic disorders, such as X-linked hypophosphatemic (XLH) rickets and tumor-induced osteomalacia (TIO), respectively. FGF23-induced hypophosphatemia is mediated by signaling through a ternary complex formed by FGF23, the FGF receptor (FGFR), and α-Klotho. Currently, disorders of excess FGF23 are treated with an FGF23-blocking antibody, burosumab. Small-molecule drugs that disrupt protein/protein interactions necessary for the ternary complex formation offer an alternative to disrupting FGF23 signaling. In this study, the FGF23:α-Klotho interface was targeted to identify small-molecule protein/protein interaction inhibitors since it was computationally predicted to have a large fraction of hot spots and two druggable residues on α-Klotho. We further identified Tyr433 on the KL1 domain of α-Klotho as a promising hot spot and α-Klotho as an appropriate drug-binding target at this interface. Subsequently, we performed in silico docking of ∼5.5 million compounds from the ZINC database to the interface region of α-Klotho from the ternary crystal structure. Following docking, 24 and 20 compounds were in the final list based on the lowest binding free energies to α-Klotho and the largest number of contacts with Tyr433, respectively. Five compounds were assessed experimentally by their FGF23-mediated extracellular signal-regulated kinase (ERK) activities in vitro, and two of these reduced activities significantly. Both these compounds were predicted to have favorable binding affinities to α-Klotho but not have a large number of contacts with the hot spot Tyr433. ZINC12409120 was found experimentally to disrupt FGF23:α-Klotho interaction to reduce FGF23-mediated ERK activities by 70% and have a half maximal inhibitory concentration (IC50) of 5.0 ± 0.23 µM. Molecular dynamics (MD) simulations of the ZINC12409120:α-Klotho complex starting from in silico docking poses reveal that the ligand exhibits contacts with residues on the KL1 domain, the KL1-KL2 linker, and the KL2 domain of α-Klotho simultaneously, thereby possibly disrupting the regular function of α-Klotho and impeding FGF23:α-Klotho interaction. ZINC12409120 is a candidate for lead optimization.

Spent Mushroom Substrate and Electric Arc Furnace Dust Recycling by Carbothermic Reduction Method.

With recent increases in environmental awareness, the circular economy concept, which involves turning waste into usable products, has gradually become widely accepted. Spent mushroom substrate (SMS) is an agricultural waste that lacks recycling channels in Taiwan. This study explored the feasibility of simultaneously recycling two completely different types of waste: spent mushroom substrate (SMS), an agricultural waste, and electric-arc furnace dust (EAFD), an industrial waste. Specifically, SMS was used to replace metallurgical coke as a reducing agent for EAFD, which underwent carbothermic reduction to recycle valuable metallic Zn. The results showed that if SMS and EAFD were mixed at a C/O ratio of 0.8, the degree of Zn removal achieved 95% at 1100 °C, which is 150 °C lower than the reduction temperature of the EAFD-coke mixture (due to volatile matter (VM) in SMS). For the reduction of ZnO in EAFD, with the assistance of VM in SMS, the C/O ratio can be decreased from 0.8 to 0.16 at 1300 °C, achieving a high degree of Zn removal over 95%. In addition, the torrefaction of SMS increased the fixed carbon content and improved the Zn productivity at the same C/O ratio, reaching almost the same productivity as the coke sample (SMS torrefaction = 500 °C, C/O = 0.8, reduction = 1200 °C, Zn removal~99%). Finally, CO2 emission reductions from the use of SMS were also estimated.

Novel Small Molecule Fibroblast Growth Factor 23 Inhibitors Increase Serum Phosphate and Improve Skeletal Abnormalities in Hyp Mice.

Excess fibroblast growth factor (FGF) 23 causes hereditary hypophosphatemic rickets, such as X-linked hypophosphatemia (XLH) and tumor-induced osteomalacia (TIO). A small molecule that specifically binds to FGF23 to prevent activation of the fibroblast growth factor receptor/α-Klotho complex has potential advantages over the currently approved systemically administered FGF23 blocking antibody. Using structure-based drug design, we previously identified ZINC13407541 (N-[[2-(2-phenylethenyl)cyclopenten-1-yl]methylidene]hydroxylamine) as a small molecule antagonist for FGF23. Additional structure-activity studies developed a series of ZINC13407541 analogs with enhanced drug-like properties. In this study, we tested in a preclinical Hyp mouse homolog of XLH a direct connect analog [(E)-2-(4-(tert-butyl)phenyl)cyclopent-1-ene-1-carbaldehyde oxime] (8n), which exhibited the greatest stability in microsomal assays, and [(E)-2-((E)-4-methylstyryl)benzaldehyde oxime] (13a), which exhibited increased in vitro potency. Using cryo-electron microscopy structure and computational docking, we identified a key binding residue (Q156) of the FGF23 antagonists, ZINC13407541, and its analogs (8n and 13a) in the N-terminal domain of FGF23 protein. Site-directed mutagenesis and bimolecular fluorescence complementation-fluorescence resonance energy transfer assay confirmed the binding site of these three antagonists. We found that pharmacological inhibition of FGF23 with either of these compounds blocked FGF23 signaling and increased serum phosphate and 1,25-dihydroxyvitamin D [1,25(OH)2D] concentrations in Hyp mice. Long-term parenteral treatment with 8n or 13a also enhanced linear bone growth, increased mineralization of bone, and narrowed the growth plate in Hyp mice. The more potent 13a compound had greater therapeutic effects in Hyp mice. Further optimization of these FGF23 inhibitors may lead to versatile drugs to treat excess FGF23-mediated disorders. SIGNIFICANCE STATEMENT: This study used structure-based drug design and medicinal chemistry approaches to identify and optimize small molecules with different stability and potency, which antagonize excessive actions of fibroblast growth factor 23 (FGF23) in hereditary hypophosphatemic rickets. The findings confirmed that these antagonists bind to the N-terminus of FGF23 to inhibit its binding to and activation of the fibroblast growth factor receptors/α-Klotho signaling complex. Administration of these lead compounds improved phosphate homeostasis and abnormal skeletal phenotypes in a preclinical Hyp mouse model.

Smart Window with Active-Passive Hybrid Control.

Dimming and scattering control are two of the major features of smart windows, which provide adjustable sunlight intensity and protect the privacy of people in a building. A hybrid photo- and electrical-controllable smart window that exploits salt and photochromic dichroic dye-doped cholesteric liquid crystal was developed. The photochromic dichroic dye causes a change in transmittance from high to low upon exposure to sunlight. When the light source is removed, the smart window returns from colored to colorless. The salt-doped cholesteric liquid crystal can be bi-stably switched from transparent into the scattering state by a low-frequency voltage pulse and switched back to its transparent state by a high-frequency voltage pulse. In its operating mode, an LC smart window can be passively dimmed by sunlight and the haze can be actively controlled by applying an electrical field to it; it therefore exhibits four optical states-transparent, scattering, dark clear, and dark opaque. Each state is stable in the absence of an applied voltage. This smart window can automatically dim when the sunlight gets stronger, and according to user needs, actively adjust the haze to achieve privacy protection.

Deconstruction of biomass enabled by local demixing of cosolvents at cellulose and lignin surfaces.

A particularly promising approach to deconstructing and fractionating lignocellulosic biomass to produce green renewable fuels and high-value chemicals pretreats the biomass with organic solvents in aqueous solution. Here, neutron scattering and molecular-dynamics simulations reveal the temperature-dependent morphological changes in poplar wood biomass during tetrahydrofuran (THF):water pretreatment and provide a mechanism by which the solvent components drive efficient biomass breakdown. Whereas lignin dissociates over a wide temperature range (>25 °C) cellulose disruption occurs only above 150 °C. Neutron scattering with contrast variation provides direct evidence for the formation of THF-rich nanoclusters (Rg ∼ 0.5 nm) on the nonpolar cellulose surfaces and on hydrophobic lignin, and equivalent water-rich nanoclusters on polar cellulose surfaces. The disassembly of the amphiphilic biomass is thus enabled through the local demixing of highly functional cosolvents, THF and water, which preferentially solvate specific biomass surfaces so as to match the local solute polarity. A multiscale description of the efficiency of THF:water pretreatment is provided: matching polarity at the atomic scale prevents lignin aggregation and disrupts cellulose, leading to improvements in deconstruction at the macroscopic scale.

Antimicrobial Zn-Based "TSOL" for Citrus Greening Management: Insights from Spectroscopy and Molecular Simulation.

Huanglongbing (HLB), also known as citrus greening, is a bacterial disease that poses a devastating threat to the citrus industry worldwide. To manage this disease efficiently, we developed and characterized a ternary aqueous solution (TSOL) that contains zinc nitrate, urea, and hydrogen peroxide. We report that TSOL exhibits better antimicrobial activity than commercial bactericides for growers. X-ray fluorescence analysis demonstrates that zinc is delivered to citrus leaves, where the bacteria reside. FTIR and Raman spectroscopy, molecular dynamics simulations, and density functional theory calculations elucidate the solution structure of TSOL and reveal a water-mediated interaction between Zn2+ and H2O2, which may facilitate the generation of highly reactive hydroxyl radicals contributing to superior antimicrobial activity of TSOL. Our results not only suggest TSOL as a potent antimicrobial agent to suppress bacterial growth in HLB-infected trees, but also provide a structure-property relationship that explains the superior performance of TSOL.

Self-assembled monolayer structures of hexadecylamine on Cu surfaces: density-functional theory.

We used dispersion-corrected density-functional theory to probe possible structures for adsorbed layers of hexadecylamine (HDA) on Cu(100) and Cu(111). HDA forms self-assembled layers on these surfaces, analogous to alkanethiols on various metal surfaces, and it binds by donating electrons in the amine group to the Cu surface atoms, consistent with experiment. van der Waals interactions between the alkyl tails of HDA molecules are stronger than the interaction between the amine group and the Cu surfaces. Strong HDA-tail interactions lead to coverage-dependent tilting of the HDA layers, such that the tilt angle is larger for lower coverages. At full monolayer coverage, the energetically preferred binding configuration for HDA on Cu(100) is a (5 × 3) pattern - although we cannot rule out incommensurate structures - while the pattern is preferred on Cu(111). A major motivation for this study is to understand the experimentally observed capability of HDA as a capping agent for producing {100}-faceted Cu nanocrystals. Consistent with experiment, we find that HDA binds more strongly to Cu(100) than to Cu(111). This strong binding stems from the capability of HDA to form more densely packed layers on Cu(100), which leads to stronger HDA-tail interactions, as well as the stronger binding of the amine group to Cu(100). We estimate the surface energies of HDA-covered Cu(100) and Cu(111) surfaces and find that these surfaces are nearly isoenergetic. By drawing analogies to previous theoretical work, it seems likely that HDA-covered Cu nanocrystals could have kinetic shapes that primarily express {100} facets, as is seen experimentally.

Converting Nonliquid Crystals into Liquid Crystals by N-Methylation in the Central Linker of Triazine-Based Dendrimers.

Two triazine-based dendrimers were successfully prepared in 60-75% yields. These newly prepared dendrimers 2a and 2b containing the -NMe(CH2)2NMe- and the -NMe(CH2)4NMe- linkers between two G3 dendrons, respectively, exhibit columnar phases during the thermal process. However, the corresponding dendrimers 1a and 1b containing the -NH(CH2)2NH- and the -NH(CH2)4NH- linkers between two G3 dendrons, respectively, do not show any LC phases on thermal treatment. Computational investigations on molecular conformations reveal that N-methylation of the dendritic central linker leads dendrimers to possess more isomeric conformations and thus successfully converts non-LC dendrimers (1a and 1b) into LC dendrimers (2a and 2b).

Product characteristics from the torrefaction of oil palm fiber pellets in inert and oxidative atmospheres.

The aim of this work was to study the characteristics of solid and liquid products from the torrefaction of oil palm fiber pellets (OPFP) in inert and oxidative environments. The torrefaction temperature and O2 concentration in the carrier gas were in the ranges of 275-350°C and 0-10 vol%, respectively, while the torrefaction duration was 30 min. The oxidative torrefaction of OPFP at 275°C drastically intensified the HHV of the biomass when compared to the non-oxidative torrefaction. OPFP torrefied at 300°C is recommended to upgrade the biomass, irrespective of the atmosphere. The HHV of condensed liquid was between 10.1 and 13.2 MJ kg(-)(1), and was promoted to 23.2-28.7 MJ kg(-)(1) following dewatering. This accounts for 92-139% improvement in the calorific value of the liquid. This reveals that the recovery of condensed liquid with dewatering is able to enhance the energy efficiency of a torrefaction system.

An Unconventional Approach to Induce Liquid-Crystalline Phases of Triazine-Based Dendrons by Breaking Their Self-Assembly into Dimers.

Three triazine-based dendrons (1 a-c) were successfully prepared in 70-83 % yields. These newly prepared dendrons are found to be liquid crystalline (LC). Computational investigations on molecular conformations and dipoles of triazine-based dendrons reveal that the substituent on the central triazine unit interrupts strong dipole or H-bond interactions to avoid dimeric formation. The obtained dendrons, not favouring self-assembly into dimers but showing LC behaviours, provides evidence for an approach contrary to the conventional method of inducing LC behaviours of dendrons by dimer or trimer formation, mostly through H-bond interactions.

A small change in central linker has a profound effect in inducing columnar phases of triazine-based unconventional dendrimers.

Four unconventional triazine-based dendrimers have been prepared and characterized by (1) H and (13) C NMR spectroscopies, mass spectrometry, and elemental analysis. Based on DSC studies, polarizing microscopy, and powder XRD, two of these dendrimers, containing linkers with an odd number of carbon atoms, were observed to display columnar liquid-crystalline phases during thermal treatment. However, the other two dendritic analogues, containing linkers with an even number of carbon atoms, were not observed to behave correspondingly. Based on computer simulation, we reasonably assume that the dendrimers with an odd number of carbon atoms in their linkers distort their molecular shape and adopt two isomeric structures due to asymmetrical congestion. This reduces the molecular π-π face-to-face interaction, which in turn causes the dendrimers to form columnar LC phases during thermal treatment. However, the dendrimers with an even number of carbon atoms in their linkers have more symmetrical skeletons and do not display any liquid-crystalline phase upon thermal treatment. This new strategy should be applicable for eliciting the columnar liquid-crystalline properties of other types of unconventional dendrimers with rigid frameworks.

Biomass torrefaction characteristics in inert and oxidative atmospheres at various superficial velocities.

The reaction characteristics of four biomass materials (i.e. oil palm fiber, coconut fiber, eucalyptus, and Cryptomeria japonica) with non-oxidative and oxidative torrefaction at various superficial velocities are investigated where nitrogen and air are used as carrier gases. Three torrefaction temperatures of 250, 300, and 350 °C are considered. At a given temperature, the solid yield of biomass is not affected by N2 superficial velocity, revealing that the thermal degradation is controlled by heat and mass transfer in biomass. Increasing air superficial velocity decreases the solid yield, especially in oil palm fiber and coconut fiber, implying that the torrefaction reaction of biomass is dominated by surface oxidation. There exists an upper limit of air superficial velocity in the decrement of solid yield, suggesting that beyond this limit the thermal degradation of biomass is no longer governed by surface oxidation, but rather is controlled by internal mass transport.

Torrefaction and low temperature carbonization of oil palm fiber and Eucalyptus in nitrogen and air atmospheres.

Torrefaction is a pretreatment method for upgrading biomass as solid fuels. To provide flexible operations for effectively upgrading biomass at lower costs, the aim of this study was to investigate the properties of oil palm fiber and eucalyptus pretreated in nitrogen and air atmospheres at temperatures of 250-350°C for 1h. Based on energy and solid yield and introducing an energy-mass co-benefit index (EMCI), oil palm fiber pretreatment under nitrogen at 300°C provided the solid fuel with higher energy density and less volume compared to other temperatures. Pretreatment of oil palm fiber in air resulted in the fuel with low solid and energy yields and is therefore not recommended. For eucalyptus, nitrogen and air can be employed to upgrade the biomass, and the suggested temperatures are 325 and 275°C, respectively.