RESUMO
Carbon materials have great potential for applications in energy, biology, and environment due to their excellent chemical and physical properties. Their preparation by carbonization methods encounters limitations and the carbon loss during pyrolysis in the form of gaseous molecules results in low yield of carbon materials. Herein a low-energy (600 °C) and high-yield (82 wt.%) carbonization strategy is developed using liquid gallium-assisted pyrolysis of metal-organic frameworks (MOFs) affording the N-doped carbon nanotube (CNT) non-hollow frameworks encapsulating Co nanoparticles. The liquid gallium layer offers protection against air, promotes heat transfer, and limits the escape of small carbonaceous gaseous molecules, which greatly improve the yields of the pyrolysis reaction. Experimental and theoretical results reveal that the synergistic interaction between CNTs and N/O-containing groups gives a non-hollow framework composed of N/O-enriched and open CNTs (NOCNTF-15, 15 denotes the 15 mm thickness of the liquid gallium layer during the pyrolysis) with high specific capacity (185 mAh g-1 at 10 A g-1) and ultra-stable cyclability (stable operation at 10 A g-1 and 50 °C for 20 000 cycles). This study provides a unique approach to carbonization that facilitates the practical application of low-cost CNTs and other MOFs-derived carbon materials in high-performance sodium-ion batteries (SIBs).
RESUMO
Microbially induced carbonate precipitation (MICP) is a common biomineralization method, which is often used for remediation of heavy metal pollution such as hexavalent chromium (Cr(VI)) in recent years. Calcium sources are essential for the MICP process. This study investigated the potential of MICP technology for Cr(VI) remediation under the influence of three calcium sources (CaCl2, Ca(CH3COO)2, Ca(C6H11O7)2). The results indicated that CaCl2 was the most efficient in the mineralization of Cr(VI), and Ca(C6H11O7)2 could significantly promote Cr(VI) reduction. The addition of different calcium sources all promoted the urease activity of Sporosarcina saromensis W5, in which the CaCl2 group showed higher urease activity at the same Ca2+ concentration. Besides, with CaCl2, Ca(CH3COO)2 and Ca(C6H11O7)2 treatments, the final fraction of Cr species (Cr(VI), reduced Cr(III) and organic Cr(III)-complexes) were mainly converted to the carbonate-bound, cytoplasm and cell membrane state, respectively. Furthermore, the characterization results revealed that three calcium sources could co-precipitate with Cr species to produce Ca10Cr6O24(CO3), and calcite and vaterite were present in the CaCl2 and Ca(CH3COO)2 groups, while only calcite was present in the Ca(C6H11O7)2 group. Overall, this study contributes to the optimization of MICP-mediated remediation of heavy metal contaminated soil. CaCl2 was the more suitable calcium source than the other two for the application of MICP technology in the Cr(VI) reduction and mineralization.
RESUMO
Lithium (Li) metal is a promising next-generation anode material, but it suffers from dendrite growth and unstable solid electrolyte interphase (SEI). We developed a robust and continuous self-standing covalent organic framework (COF) membrane using a same-phase synthesis method and utilized the membrane as an artificial SEI. The membrane suppressed dendrite growth and enhanced the stability and longevity of Li metal anode cycling.
RESUMO
Minimal hepatic encephalopathy (MHE) has a substantial impact on the clinical outcomes and quality of life (QOL) of patients with cirrhosis. However, timely diagnosis and intervention are challenging due to sophisticated diagnostic methods. In this study, 673 healthy controls and 905 patients with cirrhosis were screened, and 660 healthy controls and 757 patients with cirrhosis, divided into the test (292 patients) and validation (465 patients) cohort, were analyzed after screening. A diagnostic model of the Stroop test (Stroop-CN) was constructed by multivariate linear regression based on the results of healthy controls. The prevalence of MHE and the comparison results with psychometric hepatic encephalopathy score through the Stroop-CN model were stable in the test and validation cohorts. Moreover, the prevalence of MHE remained significantly higher in patients with worse disease conditions marked as high Child-Pugh grades and the Model for End-stage Liver Disease and Sodium (MELD-Na) scores in the test and validation cohort. The EuroQol 5-D questionnaire revealed that patients with MHE had a worse QOL than those without MHE both in the test and validation cohort. In conclusion, an easy and practical Stroop-CN model for MHE diagnosis based on the EncephalApp is established. It is found that a considerable number of Chinese patients with cirrhosis experience MHE, which significantly impacts their QOL.
RESUMO
BACKGROUND: Early neurological deterioration (END) after bridging therapy (BT) of acute ischemic stroke (AIS) patients is associated with poor outcomes. OBJECTIVE: We aimed to study the incidence, risk factors and prognosis of END after BT. METHODS: From January to December 2021, the clinical data of AIS patients treated by BT (intravenous thrombolysis with alteplase prior to mechanical thrombectomy) from three comprehensive stroke centers were analyzed. Patients were divided into non-END group and END group according to whether they developed END within 72 hours of symptom onset. Modified Rankin scale (mRS) was used to assess the patient's prognosis at 90 days, and favorable outcomes were defined as mRS≤2. The incidence of END was investigated, and binary logistic regression analysis was used to explore its associated factors. RESULTS: The incidence of END after BT was 33.67%. The eligible 90 patients included 29 cases in the END group and 61 cases in the non-END group. Multivariate Logistic regression analysis showed that increase of systolic blood pressure (SBP) (OR=1.026, 95%CI:1.001-1.051, p =0.043), higher level of blood glucose at admission (OR=1.389, 95%CI:1.092-1.176, p =0.007) and large artery atherosclerosis (LAA) subtype (OR=8.009, 95%CI:2.357-27.223, p =0.001) were independent risk factors of END. Compared with the non-END group, the END group had significantly lower rates of good outcomes (6.90% versus 65.57%, p =0.001) while higher rates of mortality (44.83% versus 4.92%, p =0.001). CONCLUSION: It was found that the incidence of END after BT in AIS patients was 33.67%. An increase in SBP, higher glucose levels at admission, and LAA were independent risk factors of END that predicted a poor prognosis.
Assuntos
AVC Isquêmico , Ativador de Plasminogênio Tecidual , Humanos , Masculino , Feminino , Fatores de Risco , Idoso , Pessoa de Meia-Idade , Prognóstico , AVC Isquêmico/terapia , Ativador de Plasminogênio Tecidual/uso terapêutico , Fibrinolíticos/uso terapêutico , Fibrinolíticos/efeitos adversos , Terapia Trombolítica/efeitos adversos , Terapia Trombolítica/métodos , Estudos Retrospectivos , Idoso de 80 Anos ou mais , Doenças do Sistema Nervoso/etiologia , Doenças do Sistema Nervoso/epidemiologia , Trombectomia/métodos , Trombectomia/tendências , Trombectomia/efeitos adversosRESUMO
Efficient CO2 separation technologies are essential for mitigating climate change. Compared to traditional thermochemical methods, electrochemically mediated carbon capture using redox-tunable sorbents emerges as a promising alternative due to its versatility and energy efficiency. However, the undesirable linear free-energy relationship between redox potential and CO2 binding affinity in existing chemistry makes it fundamentally challenging to optimise key sorbent properties independently via chemical modifications. Here, we demonstrate a design paradigm for electrochemically mediated carbon capture sorbents, which breaks the undesirable scaling relationship by leveraging intramolecular hydrogen bonding in isoindigo derivatives. The redox potentials of isoindigos can be anodically shifted by >350 mV to impart sorbents with high oxygen stability without compromising CO2 binding, culminating in a system with minimised parasitic reactions. With the synthetic space presented, our effort provides a generalisable strategy to finetune interactions between redox-active organic molecules and CO2, addressing a longstanding challenge in developing effective carbon capture methods driven by non-conventional stimuli.
RESUMO
Biomineralization by phosphate minerals and phosphate solubilizing fungi (PSF) has attracted great interest as a novel remediation method for heavy metal(loid) co-contaminated soil. It was very essential to investigate the microenvironment response with the application of amendments. In this study, three grain sizes of hydroxyapatites (HAP) and Phanerochaete chrysosporium (P. chrysosporium) were used to investigate the change in heavy metal(loid) fractions, soil physicochemical properties, and bacterial community during the remediation of Mangchang and Dabaoshan acidic mine soils. The results showed that the residual fractions in the two soils increased significantly after 35 days of remediation, especially that of As and Zn in Dabaoshan soils were presented at over 87%. In addition, soil pH, organic matter (OM), and available phosphorous (AP) were almost improved. 16S rRNA sequencing analysis indicated that the introduction of culture medium and P. chrysosporium alone changed bacterial abundance, but the addition of HAP changed the bacterial diversity and community composition by altering environmental conditions. The amendments in the research showed good performance on immobilizing heavy metal(loid)s and reducing their bioavailability. Moreover, the research suggested that environmental factors and soil inherent properties could influence the microbial community structure and composition.
Assuntos
Metais Pesados , Phanerochaete , Poluentes do Solo , Solo/química , Fosfatos/análise , RNA Ribossômico 16S , Metais Pesados/análise , Poluentes do Solo/análiseRESUMO
PURPOSE: A multivesicular liposome (MVL) is a liposomal vehicle designed to achieve sustained release characteristics for drugs with short half-lives. For example, a commercial MVL formulation of bupivacaine has been approved by the U.S. Food and Drug Administration for local and regional analgesia. For complex formulations like those containing MVLs, challenges in developing an in vitro release testing (IVRT) method may hinder generic development and regulatory approval. In this study, we developed an accelerated rotator-based IVRT method with the ability to discriminate bupivacaine MVLs with different quality attributes. METHODS: Three IVRT experimental setups including mesh tube, horizontal shaker, and vertical rotator were screened to ensure that at least 50% of bupivacaine can release from MVLs in 24 h. Sample dilution factors, incubation temperature, and the release media pH were optimized for the IVRT. The reproducibility of the developed IVRT method was validated with commercial bupivacaine MVLs. The discriminative capacity was assessed via comparing commercial and compromised bupivacaine MVL formulations. RESULTS: The rotator-based release setup was chosen due to the capability to obtain 70% of drug release within 24 h. The optimized testing conditions were chosen with a 50-fold dilution factor, a temperature of 37ºC, and a media pH of 7.4. CONCLUSIONS: An accelerated rotator-based IVRT method for bupivacaine MVLs was developed in this study, with the discriminatory ability to distinguish between formulations of different qualities. The developed IVRT method was a robust tool for generic development of MVL based formulations.
Assuntos
Bupivacaína , Lipossomos , Liberação Controlada de Fármacos , Preparações de Ação Retardada , Reprodutibilidade dos TestesRESUMO
Adaptable redox-active materials hold great potential for electrochemically mediated separation processes via targeted molecular recognition and reduced energy requirements. This work presents molecularly tunable vinylferrocene metallopolymers (P(VFc-co-X)) with modifiable operating potentials, charge storage capacities, capacity retentions, and analyte affinities in various electrolyte environments based on the hydrophobicity of X. The styrene (St) co-monomer impedes hydrophobic anions from ferrocene access, providing P(VFc-co-St) with specific response capabilities for and greatly improved cyclabilities in hydrophilic anions. This adjustable electrochemical stability enables preferential chromium and rhenium oxyanion separation from both hydrophobic and hydrophilic electrolytes that significantly surpasses capacitive removal by an order of magnitude, with a robust perrhenate uptake capacity of 329 mg/g VFc competitive with established metal-organic framework physisorbents and 17-fold selectivity over 20-fold excess nitrate. Pairing P(VFc-co-X) with other solution-specific electroactive macromolecules such as the pH-dependent poly(hydroquinone) (PHQ) and the cesium-selective nickel hexacyanoferrate (NiHCF) generates dual-functionalized electrosorption cells. P(VFc-co-X)//PHQ offers optimizable energetics based on X and pH for a substantial 4.6-fold reduction from 0.21 to 0.04 kWh/mol rhenium in acidic versus near-neutral media, and P(VFc-co-St)//NiHCF facilitates simultaneous extraction of rhenium, chromium, and cesium ions. Proof-of-concept reversible perrhenate separation in flow further highlights such frameworks as promising approaches for next-generation water purification technologies.
RESUMO
ConspectusCarbon capture is an indispensable step toward closing the anthropogenic carbon cycle. However, the large-scale implementation of conventional thermochemical carbon capture technologies is hindered by their low energy efficiency, limited sorbent stability, and complexity in infrastructure integration. A mechanistically different alternative, commonly known as electrochemically mediated carbon capture (EMCC), has garnered increasing research traction over the past few years and relies on electrochemical stimuli instead of thermal or pressure swings for the capture and release of carbon dioxide (CO2). Compared to conventional methods, EMCC can be operated under mild conditions driven by intermittent renewable energy sources and has a flexible design to meet the multiscale demands of carbon capture, offering a potentially sustainable, energy-efficient, and cost-effective solution to CO2 concentration from dilute mixtures or the ambient environment.Nanomaterials have played a crucial role in carbon capture research. For instance, nanoporous materials can provide increased free volumes, surface areas, and active sites for carbon capture through physical or chemical adsorption from the gaseous phase. In contrast, EMCC relies on chemical absorption via acid-base interactions using solubilized CO2 in electrolytes. Therefore, most EMCC sorbents and mediators explored so far have been developed as molecules rather than nanomaterials. In recent years, our team has been focusing on electrifying the carbon capture processes at the molecular, materials, and process levels. We seek to address the most pressing issues associated with EMCC, either in fixed-bed or flow systems, that prevent their practical use. These issues include parasitic reactions with molecular oxygen, insufficient electrode capacity utilization, sorbent crossover, etc. To address these problems, there is an urgent need to develop rationally designed nanomaterials at the interface of molecular electrochemistry and device engineering. This Account provides an overview of recent progress on developing new chemistries and engineering batch/continuous processes for EMCC. We discuss the limitations of current EMCC technology and emphasize why nanomaterials are critical for electrifying carbon capture. First, we introduce the design principles for EMCC sorbents based on redox-active organic CO2 carriers and discuss metrics for their performance evaluation. Second, we showcase how molecular design can tackle problems of sorbent solubility, oxygen stability, and electrolyte compatibility in EMCC. Third, we discuss the early results of nanomaterials as solid sorbents in fixed-bed systems, nonswelling membranes for flow systems, and high-surface-area gas-liquid contactors. Finally, building on the foundation we established through our prior work, we offer perspectives on future directions for nanomaterials to help address the challenges in EMCC.
RESUMO
BACKGROUND: Pacing is the most effective and dependable method for treating complete atrioventricular block (AVB). OBJECTIVE: The purpose of this study is to investigate the use of His bundle pacing (HBP) in patients with atrioventricular block. METHODS: Patients who underwent HBP or right ventricular pacing (RVP) were enrolled and divided into two groups: the HBP group and the RVP group, respectively. We compared baseline clinical data, fluoroscopy duration, operation duration, pacing electrode parameters during the operation or follow-up, baseline QRS duration, and pacing QRS duration. RESULTS: HBP was attempted in 48 patients and was successful in 34 patients who were included in the HBP group. In addition, 30 RVP patients were included in the RVP group. Fluoroscopy duration and operation duration were significantly longer in the HBP group compared to the RVP group. Compared to the RVP group, the HBP group had a higher pacing threshold, a lower R wave amplitude, and a shorter pacing QRS duration. At 6 months of follow-up, the pacing threshold remained higher, the R wave amplitude was significantly lower, and the end-diastolic diameter of the left ventricle was smaller in the HBP group. CONCLUSION: HBP was safe and effective for atrioventricular block despite the longer fluoroscopy and operation duration in the HBP group when compared to the RVP group.
Assuntos
Bloqueio Atrioventricular , Fascículo Atrioventricular , Humanos , Bloqueio Atrioventricular/terapia , Estimulação Cardíaca Artificial/métodos , Eletrocardiografia , Ventrículos do Coração , Resultado do TratamentoRESUMO
The microbial reduction of Cr(VI) to Cr(III) is widely applied, but most studies ignored the stability of reduction products. In this study, the Cr(VI)-reducing bacterium of Sporosarcina saromensis combined with microbially induced carbonate precipitation (MICP) was used to explore the reduction and mineralization mechanisms of Cr(VI). The results indicated that the high concentration of Ca2+ could significantly enhance the reduction and mineralization of Cr(VI). The highest reduction and mineralization efficiencies of 99.5% and 55.9% were achieved at 4 g/L Ca2+. Moreover, the urease activity of S. saromensis in the experimental group was up to 13.28 U/mg NH3-N. Besides, the characteristic results revealed that Cr(VI) and reduced Cr(III) were absorbed on the surface or got into the interspace of CaCO3, which produced a new stable phase (Ca10Cr6O24(CO3)). Overall, the combination of S. saromensis and MICP technology might be a high-efficiency and environmentally friendly strategy for further application in the Cr(VI)-containing groundwater.
Assuntos
Cromo , Sporosarcina , Carbonatos , Carbonato de CálcioRESUMO
Spray-dried poly(lactic-co-glycolic acid) (PLGA) peptide-loaded microspheres have demonstrated similar long-term in vitro release kinetics compared to those produced by the solvent evaporation method and commercial products. However, the difficult-to-control initial burst release over the first 24 h after administration presents an obstacle to product development and establishing bioequivalence. Currently, detailed information about underlying mechanisms of the initial burst release from microspheres is limited. We investigated the mechanism and extent of initial burst release using 16 previously developed spray-dried microsphere formulations of the hormone drug, leuprolide acetate, with similar composition to the commercial 1-month Lupron Depot® (LD). The burst release kinetics was measured with a previously validated continuous monitoring system as well as traditional sample-and-separate methods. The changes in pore structure and polymer permeability were investigated by SEM imaging and the uptake of a bodipy-dextran probe. In vitro results were compared to pharmacokinetics in rats over the same interval. High-burst, spray-dried microspheres were differentiated in the well-mixed continuous monitoring system but reached an upper limit when measured by the sample-and-separate method. Pore-like occlusions observed by confocal microscopy in some formulations indicated that particle swelling may have contributed to probe diffusion through the polymer phase and showed the extensive internal pore structure of spray-dried particles. Continuous monitoring revealed a rapid primary (1°) phase followed by a constant-rate secondary (2°) release phase, which comprised â¼80% and 20% of the 24-hr release, respectively. The ratio of 1° phase duration (t1°) and the characteristic probe diffusion time (τ) was highly correlated to 1° phase release for spray dried particles. Of the four spray-dried formulations administered in vivo, three spray-dried microspheres with similar polymer density showed nearly ideal linear correlation between in vivo absorption and well-mixed in vitro release kinetics over the first 24 h. By contrast, the more structurally dense LD and a more-dense in-house formulation showed a slight lag phase in vivo relative to in vitro. Furthermore, in vitro dimensionless times (tburst/τ) were highly correlated with pharmacokinetic parameters for spray-dried microspheres but not for LD. While the correlation of increases in effective probe diffusion and 1° phase release strongly suggests diffusion through the polymer matrix as a major release mechanism both in vitro and in vivo, a fixed lower limit for this release fraction implies an alternative release mechanism. Overall, continuous monitoring release and probe diffusion appears to have potential in differentiating between leuprolide formulations and establishing relationships between in vitro release and in vivo absorption during the initial burst period.
Assuntos
Leuprolida , Polímeros , Ratos , Animais , Leuprolida/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Microesferas , Polímeros/química , Solventes , Tamanho da PartículaRESUMO
Purpose: The present study aimed to identify the characteristics, predictors, and imaging features of poor recovery in cases of cerebral venous sinus thrombosis (CVST). Patients and Methods: A total of 290 consecutive adult patients with CVST were enrolled from January 2017 to December 2021 from five hospitals in Nanning, Guangxi. According to the modified Rankin scale (mRS) score at hospital discharge, the patients were classified into good prognosis (GP, mRS ≤2) groups and poor prognosis (PP, mRS>2) groups. Logistic regression was used to identify factors associated with clinical outcomes. Results: Of the 290 patients, 35 were assigned to the PP group and 255 to the GP group. No significant difference in sex was observed between the two groups. Headache (76.21%) was the most frequent symptom of CVST, and local head and neck infection was the major comorbidity (26.21%). Approximately half of the patients (48.62%) had brain injury lesions <1 cm, and the most commonly affected sinus was the lateral sinus (81.03%). Less-common headaches (odds ratio [OR]: 2.769, p=0.046), altered mental status (OR: 0.122, p<0.001), hematologic disorder (OR: 0.191, p=0.045), and injury to multiple lobes (OR: 0.166, p=0.041) were associated with poor clinical outcomes. Conclusion: Headache was the most common and protective manifestation of CVST, and disturbances in consciousness were an important indication of poor clinical prognosis. Patients with hematologic diseases also tended to have poor outcomes. No significant correlation was found between the number and location of venous sinus thromboses and clinical prognosis; however, intracranial injury involving multiple lobes was often associated with poor prognosis.
RESUMO
Intelligent fluorescent coatings have received widespread attention in the encryption technique field such as anti-counterfeit, while the traditional fluorescent coatings are easy to be damaged by external force. In this study, the fluorescent and self-healing anti-counterfeit coatings are prepared after rational molecular design. Two polymers containing fluorescent groups, including polyurethane containing the anthracene (AN) side group and polyimide containing the naphthalenediimide (NDI) structure are synthesized to realize multiple color changes with fluorescence through simply blending. Due to the overlapping fluorescence spectra of the groups, enabling the fluorescence resonance energy transfer effect (FRET), the coating with different group ratios exhibits tunable fluorescence under the same excitation light, providing diverse patterns. Moreover, due to the reversible photo-crosslinking and thermal de-dimerization properties of anthracene, the recording, erasure, and rewriting of the surface pattern can be realized, and the fluorescent anti-counterfeit coatings exhibit excellent self-healing properties after cross-linking due to the FRET effect, which solves the problem of poor healing and ensures the stability and integrity. The fluorescent coating with cross-linked structure and self-healing behavior based on the FRET effect greatly expands the functional applications of traditional polyurethane materials.
Assuntos
Transferência Ressonante de Energia de Fluorescência , Poliuretanos , Transferência Ressonante de Energia de Fluorescência/métodos , Polímeros/química , Fenômenos Mecânicos , Corantes , AntracenosRESUMO
Curcumin (CUR) is a natural polyphenol extract with significant antioxidant and anti-inflammatory effects, which indicates its great potential for neuroprotection. Lactoferrin (LF), a commonly used oral carrier and targeting ligand, has not been reported as a multifunctional nanocarrier for nose-to-brain delivery. This study aims to develop a nose-to-brain delivery system of curcumin-lactoferrin nanoparticles (CUR-LF NPs) and to further evaluate the neuroprotective effects in vitro and brain accumulation in vivo. Herein, CUR-LF NPs were prepared by the desolvation method with a particle size of 84.8 ± 6.5 nm and a zeta potential of +22.8 ± 4.3 mV. The permeability coefficient of CUR-LF NPs (4.36 ± 0.79 × 10-6 cm/s) was 50 times higher than that of CUR suspension (0.09 ± 0.04 × 10-6 cm/s) on MDCK monolayer, indicating that the nanoparticles could improve the absorption efficiency of CUR in the nasal cavity. Moreover, CUR-LF NPs showed excellent protection against Aß25-35-induced nerve damage in PC12 cells. In vivo pharmacokinetic studies showed that the brain-targeting efficiency of CUR-LF NPs via IN administration was 248.1%, and the nose-to-brain direct transport percentage was 59.7%. Collectively, nose-to-brain delivery of CUR-LF NPs is capable of achieving superior brain enrichment and potential neuroprotective effects.
RESUMO
Exparel is a bupivacaine multivesicular liposomes (MVLs) formulation developed based on the DepoFoam technology. The complex composition and the unique structure of MVLs pose challenges to the development and assessment of generic versions. In the present work, we developed a panel of analytical methods to characterize Exparel with respect to particle size, drug and lipid content, residual solvents, and pH. In addition, an accelerated in vitro drug release assay was developed using a rotator-facilitated, sample-and-separate experimental setup. The proposed method could achieve over 80% of bupivacaine release within 24 h, which could potentially be used for formulation comparison and quality control purposes. The batch-to-batch variability of Exparel was examined by the established analytical methods. Four different batches of Exparel showed good batch-to-batch consistency in drug content, particle size, pH, and in vitro drug release kinetics. However, slight variation in lipid contents were observed.
Assuntos
Bupivacaína , Lipossomos , Lipossomos/química , Preparações de Ação Retardada , Liberação Controlada de Fármacos , LipídeosRESUMO
C1q-tumor necrosis factor-related protein 3 (CTRP3), an adipokine, has been reported to be closely related to cardiovascular diseases (CVDs). However, the effect of CTRP3 on heart failure (HF) remains dimness. This study was to explore the role of CTRP3 in HF and its potential interaction mechanism. Heart failure model was established by inducing ischemia myocardial infarction (MI) through ligation of the left anterior descending artery in Sprague-Dawley rats. Four weeks later, the rats were detected by transthoracic echocardiography and masson staining. Atrial natriuretic peptide (ANP), brain natriuretic peptide (BNP), cardiac troponin I (cTnI) levels, creatine kinase-MB (CK-MB) and oxidative stress levels were recorded. The level of CTRP3 was reduced in the cardiomyocytes (CMs) treated with oxygen-glucose deprivation (OGD) and in the heart of MI rats. CTRP3 overexpression alleviated cardiac dysfunction, attenuated the cardiac fibrosis, and inhibited the increases of ANP, BNP, cTnI and CK-MB in the serum of MI rats. The increases of ANP and BNP in the CMs, and the collagen I and collagen III in the cardiac fibroblasts (CFs) induced by OGD were inhibited by CTRP3 overexpression. The enhancement of oxidative stress in the heart of MI rats was inhibited by CTRP3 overexpression. These results indicated that overexpression of CTRP3 could improve cardiac function and the related cardiac fibrosis in MI-induced HF rats via inhibition of oxidative stress. Upregulation of CTRP3 may be a strategy for HF therapy in the future.
Assuntos
Insuficiência Cardíaca , Infarto do Miocárdio , Ratos , Animais , Complemento C1q/metabolismo , Complemento C1q/farmacologia , Ratos Sprague-Dawley , Infarto do Miocárdio/metabolismo , Insuficiência Cardíaca/metabolismo , Miócitos Cardíacos/metabolismo , Estresse Oxidativo , Proteínas de Transporte/metabolismo , Colágeno/metabolismo , FibroseRESUMO
PURPOSE: Mutant isocitrate dehydrogenase 1 (mIDH1) alters the epigenetic regulation of chromatin, leading to a hypermethylation phenotype in adult glioma. This work focuses on identifying gene targets epigenetically dysregulated by mIDH1 to confer therapeutic resistance to ionizing radiation (IR). EXPERIMENTAL DESIGN: We evaluated changes in the transcriptome and epigenome in a radioresistant mIDH1 patient-derived glioma cell culture (GCC) following treatment with an mIDH1-specific inhibitor, AGI-5198. We identified Zinc Finger MYND-Type Containing 8 (ZMYND8) as a potential target of mIDH1 reprogramming. We suppressed ZMYND8 expression by shRNA knockdown and genetic knockout (KO) in mIDH1 glioma cells and then assessed cellular viability to IR. We assessed the sensitivity of mIDH1 GCCS to pharmacologic inhibition of ZMYND8-interacting partners: HDAC, BRD4, and PARP. RESULTS: Inhibition of mIDH1 leads to an upregulation of gene networks involved in replication stress. We found that the expression of ZMYND8, a regulator of DNA damage response, was decreased in three patient-derived mIDH1 GCCs after treatment with AGI-5198. Knockdown of ZMYND8 expression sensitized mIDH1 GCCs to radiotherapy marked by decreased cellular viability. Following IR, mIDH1 glioma cells with ZMYND8 KO exhibit significant phosphorylation of ATM and sustained γH2AX activation. ZMYND8 KO mIDH1 GCCs were further responsive to IR when treated with either BRD4 or HDAC inhibitors. PARP inhibition further enhanced the efficacy of radiotherapy in ZMYND8 KO mIDH1 glioma cells. CONCLUSIONS: These findings indicate the impact of ZMYND8 in the maintenance of genomic integrity and repair of IR-induced DNA damage in mIDH1 glioma. See related commentary by Sachdev et al., p. 1648.