Genome Mining of Linaridins Provides Insights into the Widely Distributed LinC Oxidoreductases.

Linaridins are a family of underexplored ribosomally synthesized and post-translationally modified peptides despite the prevalence of their biosynthetic gene clusters (BGCs) in microbial genomes, as shown by bioinformatic studies. Our genome mining efforts reveal that 96 putative oxidoreductase genes, namely, LinC, are encoded in linaridin BGCs. We heterologously expressed two such LinC-containing linaridin BGCs, yan and ydn, from Streptomyces yunnanensis and obtained three new linaridins, named yunnanaridins A-C (1-3). Their structures are characterized by Z-configurations of the dehydrobutyrines and the presence of a variety of epimerized amino acid residues. Yunnanaridin A (1) is the sixth member of the family of type-B linaridins, whereas yunnanaridins B (2) and C (3) represent the first examples of expressed type-C linaridins. Interestingly, heterologous expression of the same BGCs with LinC in-frame knockouts produced the same compounds. This work expands the structural diversity of linaridins and provides evidence for the notion that the widespread LinCs may not be involved in linaridin biosynthesis.

[Experimental research on characteristics of temperature field distribution of mild moxibustion and sparrow-pecking moxibustion].

OBJECTIVE: To explore the temperature field distribution and variation rules during treatment with mild moxibustion and sparrow-pecking moxibustion of TCM. METHODS: Six healthy subjects were selected. Mild moxibustion and sparrow-pecking moxibustion were exerted at Zusanli (ST 36) respectively, for 25 min. Using infrared thermal imaging instrument, the temperature field distribution was measured during moxibustion at Zusanli (ST 36). The simulated thermometer was adopted to measure the temperature field distribution during moxibustion at the imitated cortex. At 20 min of mild moxibustion and sparrow-pecking moxibustion, the temperature field distribution generated by moxibustion was observed at the imitated cortex and Zusanli (ST 36) separately. The temperature values were collected at the sites 0.7, 2.1 and 3.5 cm far from the center of the moxibustion-exerted places successively, and then the characteristics of temperature field distribution and variation rules were compared between different moxibustion methods at the imitated cortex and Zusanli (ST 36). RESULTS: At 20 min of mild moxibustion and sparrow-pecking moxibustion at Zusanli (ST 36), the temperature field distribution focused on the center of moxibustion-exerted site and the temperature was reduced to all directions and illustrated as a curved surface graph, whereas, the temperature field distribution at the imitated cortex was consistent with that at Zusanli (ST 36). With mild moxibustion, the temperature field was distributed uniformly along the longitudinal temperature gradient; whereas, with sparrow-pecking moxibustion, the longitudinal temperature of the temperature field was greatly different, in which, the maximum temperature and the average temperature were higher than those with mild moxibustion respectively and the first time up to the peak value of sparrow-pecking moxibustion was shorter than that with mild moxibustion. The thermal transfer was presented at the non-moxibustion exerted areas during the moxibustion experiment at Zusanli (ST 36). CONCLUSION: A distance feature is presented in the temperature field measured by simulated thermometer and generated under suspension moxibustion at Zusanli (ST 36). The warm stimulation effect of sparrow-pecking moxibustion is much more obvious at the moxibustion-exerted center as compared with mild moxibustion and the area of warm stimulation generated by sparrow-pecking moxibustion is more concentrated as compared with mild moxibustion. The radiation energy produced by suspension moxibustion is scattered and attenuated in skin tissue, resulting in a certain temperature gradient in the temperature field. The warm stimulation generated at skin surface by moxibustion has a warming-dredging effect.

Revealing the chirality origin and homochirality crystallization of Ag14 nanocluster at the molecular level.

Although chirality is an ever-present characteristic in biology and some artificial molecules, controlling the chirality and demystifying the chirality origin of complex assemblies remain challenging. Herein, we report two homochiral Ag14 nanoclusters with inherent chirality originated from identical rotation of six square faces on a Ag8 cube driven by intra-cluster π···π stacking interaction between pntp- (Hpntp = p-nitrothiophenol) ligands. The spontaneous resolution of the racemic (SD/rac-Ag14a) to homochiral nanoclusters (SD/L-Ag14 and SD/R-Ag14) can be realized by re-crystallizing SD/rac-Ag14a in acetonitrile, which promotes the homochiral crystallization in solid state by forming C-H···O/N hydrogen bonds with nitro oxygen atoms in pntp- or aromatic hydrogen atoms in dpph (dpph = 1,6-bis(diphenylphosphino)hexane) on Ag14 nanocluster. This work not only provides strategic guidance for the syntheses of chiral silver nanoclusters in an all-achiral environment, but also deciphers the origin of chirality at molecular level by identifying the special effects of intra- and inter-cluster supramolecular interactions.

Persistent Effect Test and Internal Microscopic Monitoring for PEM Water Electrolyzer.

As the environmental considerations rise all over the world and under the drive of renewable energy policy, the society of hydrogen energy will come out gradually in the future. The proton exchange membrane water electrolyzer (PEMWE) is a very good hydrogen generator, characterized by low cost, high efficiency and zero emission of greenhouse gases. In this study, the micro temperature, humidity, flow, pressure, voltage, and current sensors were successfully integrated on a 50 µm thick Polyimide (PI) substrate by using micro-electro-mechanical systems (MEMS) technology. After the optimal design and process optimization of the flexible 6-in-1 microsensor, it was embedded in the PEMWE for a 500-h persistent effect test and internal real-time microscopic monitoring.

Highly selective and high-performance osmotic power generators in subnanochannel membranes enabled by metal-organic frameworks.

The electric organs of electric eels are able to convert ionic gradients into high-efficiency electricity because their electrocytes contain numerous "subnanoscale" protein ion channels that can achieve highly selective and ultrafast ion transport. Despite increasing awareness of blue energy production through nanochannel membranes, achieving high-performance energy output remains considerably unexplored. Here, we report on a heterogeneous subnanochannel membrane, consisting of a continuous UiO-66-NH2 metal-organic framework (MOF) and a highly ordered alumina nanochannel membrane. In the positively charged membrane, the angstrom-scale windows function as ionic filters for screening anions with different hydrated sizes. Driven by osmosis, the subnanochannel membrane can produce an exceptionally high Br-/NO3 - selectivity of ~1240, hence yielding an unprecedented power of up to 26.8 W/m2 under a 100-fold KBr gradient. Achieving ultrahigh selective and ultrafast osmotic transport in ion channel-mimetic MOF-based membranes opens previously unexplored avenues toward advanced separation technologies and energy-harvesting devices.

PEMWE with Internal Real-Time Microscopic Monitoring Function.

In recent years, various countries have been paying attention to environmental protection issues, believing that climate change is the main challenge to the developed countries' energy policies. The most discussed solution is renewable energy. The energy storage system can reduce the burden of the overall power system of renewable energy. The hydrogen energy is one of the optimal energy storage system options of renewable energy at present. According to these policies and the future trend, this study used micro-electro-mechanical systems (MEMS) technology to integrate micro voltage, current, temperature, humidity, flow and pressure sensors on a 50 µm thick polyimide (PI) substrate. After the optimization design and process optimization, the flexible six-in-one microsensor was embedded in the proton exchange membrane water electrolyzer (PEMWE) for internal real-time microscopic monitoring.

Flexible Five-in-One Microsensor for Real-Time Wireless Microscopic Diagnosis inside Electric Motorcycle Fuel Cell Stack Range Extender.

The focus of research and development on electric motorcycle range extender are system integration and energy regulation and management but the present fuel cell stack range extender still has defects, such as large volume, heavy weight and high cost. Its volume and weight will have a strong impact on the endurance of electric motorcycle. The bipolar plate takes most volume and weight of a proton exchange membrane fuel cell (PEMFC) stack and it is the key component influencing the overall power density and cost. Therefore, how to thin and lighten the bipolar plate and to enhance the performance and life of PEMFC stack is an urgent research subject to be solved for the moment and will be the key to whether the PEMFC stack range extender can be put in the electric motorcycle or not. In addition, the internal temperature, humidity, flow, voltage and current in the operation of PEMFC stack will influence its performance and life and the overall performance and life of fuel cell stack will be directly influenced by different external operating conditions. As nonuniform distribution of temperature, humidity, flow, voltage and current will occur in various regions inside the fuel cell stack, this study will use micro-electro-mechanical systems (MEMS) technology to develop a flexible five-in-one microsensor, which is embedded in the PEMFC stack range extender for real-time wireless microscopic diagnosis and the reliability test is performed, so that the actual operating condition inside the fuel cell stack range extender can be mastered instantly and correctly and the internal information is fed back instantly, the fuel cell stack range extender control system can be modified to the optimum operating parameters immediately, so as to enhance the performance and prolong the lifetime effectively.

[Design and application of moxibustion mechanical arm].

Traditional moxibustion treatment mainly relies on doctors using specific techniques to stimulate the patient's acupoints with ignited moxa sticks. In view of the poor reproducibility, and different methods of different doctors, difficult to carry out quantitative and qualitative research work in clinical research, a moxibustion mechanical arm was designed. The hardware modules of the mechanical arm are composed of power, micro controller STM32, position servos, moxibustion strip thruster, human-computer interaction panel and sensors; the software parts are composed of main control program and interrupt service program. The use of this moxibustion mechanical arm will enhance the system's multi-task adaptability and could perform a variety of moxibustion methods including circling moxibustion and sparrow-pecking moxibustion. The data collected in real time will be transmitted to PC through bluetooth, displayed on OLED, and the system operation modes could be switched by button. Clinical trials showed that moxibustion mechanical arm had the same treatment effects with traditional moxibustion. Meanwhile, its convenience of ope-ration, repeatability of treatment, doctors and patients's treatment experience are all better than those of traditional moxibustion.

Massively parallel sequencing of STRs using a 29-plex panel reveals stutter sequence characteristics.

Massively parallel sequencing of forensic STRs simultaneously provides length-based genotypes and core repeat sequences as well as flanking sequence variations. Here, we report primer sequences and concentrations of a next-generation sequencing (NGS)-based in-house panel covering 28 autosomal STR loci (CSF1PO, D1GATA113, D1S1627, D1S1656, D1S1677, D2S441, D2S1776, D3S3053, D5S818, D6S474, D6S1017, D6S1043, D8S1179, D9S2157, D10S1435, D11S4463, D13S317, D14S1434, D16S539, D18S51, D18S853, D20S482, D20S1082, D22S1045, FGA, TH01, TPOX, and vWA) and the sex determinant locus Amelogenin. Preliminary evaluation experiments showed that the panel yielded intralocus- and interlocus-balanced sequencing data with a sensitivity as low as 62.5 pg input DNA. A total of 203 individuals from Yunnan Bai population were sequenced with this panel. Comparative forensic genetic analyses showed that sequence-based matching probability of this 29-plex panel reached 2.37 × 10-29 , which was 23 times lower than the length-based data. Compound stutter sequences of eight STRs were compared with parental alleles. For seven loci, repeat motif insertions or deletions occurred in the longest uninterrupted repeat sequences (LUS). However, LUS and non-LUS stutters co-existed in the locus D6S474 with different sequencing depth ratios. These results supplemented our current knowledge of forensic STR stutters, and provided a sound basis for DNA mixture deconvolution.

Feasibility of Using High-Contrast Grating as a Point-of-Care Sensor for Therapeutic Drug Monitoring of Immunosuppressants.

Point-of-care (POC) testing has demonstrated great transformative potential in personalized medicine. In particular, patients undergoing transplantation require POC testing to ensure appropriate serum immunosuppressant levels so as to maintain adequate graft function and survival. However, no suitable POC device for monitoring immunosuppressant levels is currently available. Exploiting the latest advances in metamaterials can lead to a breakthrough in POC testing. A high-contrast grating (HCG) biosensor is a low-cost, compact, simple-to-fabricate, and easy-to-operate structure. It is highly sensitive and robust in surface-based biomarker detection, which is favorable for the efficiency of a POC device. In this study, the feasibility of using an HCG as a POC sensor for therapeutic drug monitoring of immunosuppressants was evaluated. The detection efficiency of the most commonly prescribed immunosuppressive medication cyclosporine A by using this sensor was demonstrated to be comparable to those of conventional commercial kits, suggesting that the sensor has the potential to be used as a rapid detection and feedback platform for increasing drug compliance and improving new organ transplant survival.

Efficient CORDIC Iteration Design of LiDAR Sensors' Point-Cloud Map Reconstruction Technology.

In this paper, we propose an efficient COordinate Rotation DIgital Computer (CORDIC) iteration circuit design for Light Detection and Ranging (LiDAR) sensors. A novel CORDIC architecture that achieves the goal of pre-selecting angles and reduces the number of iterations is presented for LiDAR sensors. The value of the trigonometric functions can be found in seven rotations regardless of the number of input N digits. The number of iterations are reduced by more than half. The experimental results show the similarity value to be all 1 and prove that the LiDAR decoded packet results are exactly the same as the ground truth. The total chip area is 1.93 mm × 1.93 mm and the core area is 1.32 mm × 1.32 mm, separately. The number of logic gates is 129,688. The designed chip only takes 0.012 ms and 0.912 ms to decode a packet and a 3D frame of LiDAR sensors, respectively. The throughput of the chip is 8.2105   ×   10 8 bits/sec. The average power consumption is 237.34 mW at a maximum operating frequency of 100 MHz. This design can not only reduce the number of iterations and the computing time but also reduce the chip area. This paper provides an efficient CORDIC iteration design and solution for LiDAR sensors to reconstruct the point-cloud map for autonomous vehicles.

Massively Parallel Sequencing of Forensic STRs Using the Ion Chef™ and the Ion S5™ XL Systems.

Next-generation sequencing (NGS) has been used to genotype forensic short tandem repeat (STR) markers for individual identification and kinship analysis. STR data from several NGS platforms have been published, but forensic application trials using the Ion S5™ XL system have not been reported. In this work, we report sensitivity, reproducibility, mixture, simulated degradation, and casework sample data on the Ion Chef™ and S5™ XL systems using an early access 25-plex panel. Sensitivity experiments showed that over 97% of the alleles were detectable with down to 62 pg input of genomic DNA. In mixture studies, alleles from minor contributors were correctly assigned at 1:9 and 9:1 ratios. NGS successfully gave 12 full genotype results from 13 challenging casework samples, compared with five full results using the CE platform. In conclusion, the Ion Chef™ and the Ion S5™ XL systems provided an alternative and promising approach for forensic STR genotyping.

Polymorphism and structure of style-specific arabinogalactan proteins as determinants of pollen tube growth in Nicotiana.

BACKGROUND: Pollen tube growth and fertilization are key processes in angiosperm sexual reproduction. The transmitting tract (TT) of Nicotiana tabacum controls pollen tube growth in part by secreting pistil extensin-like protein III (PELPIII), transmitting-tract-specific (TTS) protein and 120 kDa glycoprotein (120 K) into the stylar extracellular matrix. The three arabinogalactan proteins (AGP) are referred to as stylar AGPs and are the focus of this research. The transmitting tract regulates pollen tube growth, promoting fertilization or rejecting pollen tubes. RESULTS: The N-terminal domain (NTD) of the stylar AGPs is proline rich and polymorphic among Nicotiana spp. The NTD was predicted to be mainly an intrinsically disordered region (IDR), making it a candidate for protein-protein interactions. The NTD is also the location for the majority of the predicted O-glycosylation sites that were variable among Nicotiana spp. The C-terminal domain (CTD) contains an Ole e 1-like domain, that was predicted to form beta-sheets that are similar in position and length among Nicotiana spp. and among stylar AGPs. The TTS protein had the greatest amino acid and predicted O-glycosylation conservation among Nicotiana spp. relative to the PELPIII and 120 K. The PELPIII, TTS and 120 K genes undergo negative selection, with dn/ds ratios of 0.59, 0.29 and 0.38 respectively. The dn/ds ratio for individual species ranged from 0.4 to 0.9 and from 0.1 to 0.8, for PELPIII and TTS genes, respectively. These data indicate that PELPIII and TTS genes are under different selective pressures. A newly discovered AGP gene, Nicotiana tabacum Proline Rich Protein (NtPRP), was found with a similar intron-exon configuration and protein structure resembling other stylar AGPs, particularly TTS. CONCLUSIONS: Further studies of the NtPRP gene are necessary to elucidate its biological role. Due to its high similarity to the TTS gene, NtPRP may be involved in pollen tube guidance and growth. In contrast to TTS, both PELPIII and 120 K genes are more diverse indicating a possible role in speciation or mating preference of Nicotiana spp. We hypothesize that the stylar AGPs and NtPRP share a common origin from a single gene that duplicated and diversified into four distinct genes involved in pollen-style interactions.

Astragaloside IV Enhances Cisplatin Chemosensitivity in Non-Small Cell Lung Cancer Cells Through Inhibition of B7-H3.

BACKGROUND: Chemoresistance is a major obstacle to successful chemotherapy for human non-small cell lung cancer (NSCLC). Astragaloside IV, the component of Astragalus membranaceus, has been reported to exhibit anti-inflammation, anti-cancer and immunoregulatory properties. In the present study, we investigated the role of astragaloside IV in the chemoresistance to cisplatin in NSCLC cells. METHODS: We established astragaloside IV-suppressed NSCLC cell lines including A549, HCC827, and NCI-H1299 and evaluated their sensitivity to cisplatin in vitro. In addition, we examined the mRNA and protein levels of B7-H3 in response to cisplatin-based chemotherapy. RESULTS: We showed that high doses of astragaloside IV (10, 20, 40 ng/ml) inhibited NSCLC cell growth, whereas low concentrations of astragaloside IV (1, 2.5, 5 ng/ml) had no obvious cytotoxicity on cell viability. Moreover, combined treatment with astragaloside IV significantly increased chemosensitivity to cisplatin in NSCLC cells. On the molecular level, astragaloside IV co-treatment significantly inhibited the mRNA and protein levels of B7-H3 in the presence of cisplatin. In addition, ectopic expression of B7-H3 diminished the sensitization role of astragaloside IV in cellular responses to cisplatin in NSCLC cells. CONCLUSION: These results demonstrate that astragaloside IV enhances chemosensitivity to cisplatin via inhibition of B7-H3 and that treatment with astragaloside IV and inhibition of B7-H3 serve as potential therapeutic approach for lung cancer patients.

Surface plasmon-enhanced photoluminescence of DCJTB by using silver nanoparticle arrays.

It is demonstrated that photoluminescence of DCJTB can be enhanced by surface plasmons occurred in silver nanoparticle arrays on glass substrates fabricated by using nanosphere lithography (NSL) combined with reactive ion etching (RIE). By changing the size of the seed polystyrene nanosphere with fixed thickness of SiO(2) film as a buffer layer between silver nanoparticles and fluorescent dye, we systematically studied the interaction between surface plasmons in Ag nanostructures and fluorescent dye by measuring the photoluminescence and time-resolved photoluminescence (TRPL) of the samples. As compared with pure DCJTB, it is observed that PL enhancement as high as 9.4 times and life time shortening from 0.966 ns shortened to 0.63 ns can be achieved with polystyrene nanosphere 430 nm in diameter. The physical origin due to plasmonic excitation has been clarified from 3D finite element simulations, as well as the assistance of UV-visible reflectance spectrum.

Simultaneous measurement of group refractive index and thickness of optical samples using optical coherence tomography.

Optical coherence tomography (OCT), based on a Michelson interferometer and utilizing low coherence light as the optical source, is a novel technique for the noninvasive imaging of optical scattering media. A simple OCT scheme based on a 3 x 3 fiber coupler is presented for the simultaneous measurement of the refractive index and thickness of optical samples. The proposed system enables the refractive index and thickness to be determined without any prior knowledge of the sample parameters and is characterized by a simple and compact configuration, a straightforward measurement procedure, and a low cost. The feasibility of the proposed approach is demonstrated experimentally using BK7 and B270 optical glass samples.

[Therapeutic effects of scalp-acupuncture in patients with vascular dementia induced by cerebral infarction: a randomized controlled trial].

OBJECTIVE: To investigate the effects of scalp-acupuncture on intelligence in patients with vascular dementia (VaD). METHODS: A total of 108 VaD patients were randomly divided into two groups: scalp-acupuncture group and Western medicine group. The scores of Mini-Mental State Examination (MMSE), Blesse Dementia Scale (BDS), Hasegawa Dementia Scale (HDS), Abilities of Daily Life (ADL) before and after treatment in the two groups were detected. RESULTS: A total of 92 patients completed the treatment. The scores of MMSE, BDS and HDS in the two groups were significantly increased, and the ADL scores significantly declined (P<0.05). There was no difference in the scores of MMSE, BDS, HDS and ADL between the two groups before and after the treatment. There was no difference in the total effectiveness between the two groups (P>0.05). CONCLUSION: Scalp-acupuncture therapy could improve the clinical intelligence level of VaD patients.