Construction of nanoflower cobalt-based catalyst for methane-free CO hydrogenation to hydrocarbon reaction.

Methane and its oxidation product (i.e., CO2) are both greenhouse gases. In the product chain of CO hydrogenation to hydrocarbon reaction, methane is also an unwanted product due to its poor added value. Herein we investigated the effect of structure-directing agent urotropine on cobalt-based catalyst supported on Al-O-Zn type carrier and achieved an initial and pioneering exploration of methane-free CO hydrogenation to hydrocarbon reaction at mild CO conversion range. The catalyst modified by urotropine has a nanoflower micromorphology and can significantly change the reaction performance, almost completely eliminating the ability of the catalyst to inhibit C-C coupling within a mild CO conversion range, that is, it can produce no or less C1-C4 gaseous hydrocarbons, while rich in condensed hydrocarbons (i.e., C5+ hydrocarbon selectivity can reach as high as 92.8%-100.0%).

Investigation of causal relationships between cortical structure and osteoporosis using two-sample Mendelian randomization.

The mutual interaction between bone characteristics and brain had been reported previously, yet whether the cortical structure has any relevance to osteoporosis is questionable. Therefore, we applied a two-sample bidirectional Mendelian randomization analysis to investigate this relationship. We utilized the bone mineral density measurements of femoral neck (n = 32,735) and lumbar spine (n = 28,498) and data on osteoporosis (7300 cases and 358,014 controls). The global surficial area and thickness and 34 specific functional regions of 51,665 patients were screened by magnetic resonance imaging. For the primary estimate, we utilized the inverse-variance weighted method. The Mendelian randomization-Egger intercept test, MR-PRESSO, Cochran's Q test, and "leave-one-out" sensitivity analysis were conducted to assess heterogeneity and pleiotropy. We observed suggestive associations between decreased thickness in the precentral region (OR = 0.034, P = 0.003) and increased chance of having osteoporosis. The results also revealed suggestive causality of decreased bone mineral density in femoral neck to declined total cortical surface area (ß = 1400.230 mm2, P = 0.003), as well as the vulnerability to osteoporosis and reduced thickness in the Parstriangularis region (ß = -0.006 mm, P = 0.002). Our study supports that the brain and skeleton exhibit bidirectional crosstalk, indicating the presence of a mutual brain-bone interaction.

Improved prediction of hourly PM2.5 concentrations with a long short-term memory and spatio-temporal causal convolutional network deep learning model.

Accurate prediction of particulate matter with aerodynamic diameter ≤ 2.5 µm (PM2.5) is important for environmental management and human health protection. In recent years, many efforts have been devoted to develop air quality predictions using the machine learning and deep learning techniques. In this study, we propose a deep learning model for short-term PM2.5 predictions. The salient feature of the proposed model is that the convolution in the model architecture is causal, where the output of a time step is only convolved with components of the same or earlier time step from the previous layer. The model also weighs the spatial correlation between multiple monitoring stations. Through temporal and spatial correlation analysis, relevant information is screened from the monitoring stations with a strong relationship with the target station. Information from the target and related sites is then taken as input and fed into the model. A case study is conducted in Nanjing, China from January 1, 2020 to December 31, 2020. Using historical air quality and meteorological data from nine monitoring stations, the model predicts PM2.5 concentrations for the next hour. The experimental results show that the predicted PM2.5 concentrations are consistent with observation, with correlation coefficient (R2) and Root Mean Squared Error (RMSE) of our model are 0.92 and 6.75 µg/m3. Additionally, to better understand the factors affecting PM2.5 levels in different seasons, a machine learning algorithm based on Principal Component Analysis (PCA) is used to analyze the correlations between PM2.5 and its influencing factors. By identifying the main factors affecting PM2.5 and optimizing the input of the predictive model, the application of PCA in the model further improves the prediction accuracy, with decrease of up to 17.2 % in RMSE and 38.6 % in mean absolute error (MAE). The deep learning model established in this study provide a valuable tool for air quality management and public health protection.

Integrated multiomic analysis and high-throughput screening reveal potential gene targets and synergetic drug combinations for osteosarcoma therapy.

Although great advances have been made over the past decades, therapeutics for osteosarcoma are quite limited. We performed long-read RNA sequencing and tandem mass tag (TMT)-based quantitative proteome on osteosarcoma and the adjacent normal tissues, next-generation sequencing (NGS) on paired osteosarcoma samples before and after neoadjuvant chemotherapy (NACT), and high-throughput drug combination screen on osteosarcoma cell lines. Single-cell RNA sequencing data were analyzed to reveal the heterogeneity of potential therapeutic target genes. Additionally, we clarified the synergistic mechanisms of doxorubicin (DOX) and HDACs inhibitors for osteosarcoma treatment. Consequently, we identified 2535 osteosarcoma-specific genes and several alternative splicing (AS) events with osteosarcoma specificity and/or patient heterogeneity. Hundreds of potential therapeutic targets were identified among them, which showed the core regulatory roles in osteosarcoma. We also identified 215 inhibitory drugs and 236 synergistic drug combinations for osteosarcoma treatment. More interestingly, the multiomic analysis pointed out the pivotal role of HDAC1 and TOP2A in osteosarcoma. HDAC inhibitors synergized with DOX to suppress osteosarcoma both in vitro and in vivo. Mechanistically, HDAC inhibitors synergized with DOX by downregulating SP1 to transcriptionally modulate TOP2A expression. This study provided a comprehensive view of molecular features, therapeutic targets, and synergistic drug combinations for osteosarcoma.

Bioactivity and health effects of garlic essential oil: A review.

Garlic (Allium sativum L.), the underground bulb of the Allium plant in the family Liliaceae, is a common and popular spice that has historically been used to prevent and treat many different diseases such as pain, deafness, diarrhea, tumors, and other healthy problems. Garlic essential oil contains a variety of organosulfur compounds, such as the most representative diallyl disulfides (DADS) and diallyl trisulfides (DATS), which have attracted great interest in medicine, food, and agriculture because of their rich biological activities. This paper reviews the research progress on the composition and bioactivities of garlic essential oil mixtures and the bioactivity of some typical monomeric sulfides in garlic essential oil. The active mechanisms of representative sulfides in garlic essential oil were analyzed, and the applications of garlic essential oil in functional food, food additives, and clinical treatment were discussed. Combined with the current research status, the limitations and development direction of garlic essential oil in the study of molecular mechanism were discussed, which is of great significance to the development of garlic essential oil as a natural and safe alternative medicine for treatment.

Preparation and pharmacological effects of minor ginsenoside nanoparticles: a review.

Ginseng (Panax ginseng) is a perennial herbaceous plant belonging to Panax genus of Araliaceae. Ginsenosides are a kind of important compounds in ginseng and minor ginsenosides are secondary metabolic derivatives of ginsenosides. Studies have shown that minor ginsenosides have many pharmacological effects, such as antioxidant, anti-tumor, anti-platelet aggregation, and neuroprotective effects. However, the therapeutic effects of minor ginsenosides are limited due to poor solubility in water, short half-life, and poor targeting accuracy. In recent years, to improve the application efficiency, the research on the nanocrystallization of minor ginsenosides have attracted extensive attention from researchers. This review focuses on the classification, preparation methods, pharmacological effects, and action mechanisms of minor ginsenoside nanoparticles, as well as existing problems and future direction of relevant research, which provides a reference for the in-depth research of minor ginsenoside nanoparticles.

Transcriptional and epigenetic control of hematopoietic stem cell fate decisions in vertebrates.

Hematopoietic stem cells (HSCs) are the foundation of adult hematopoiesis that produce all types of mature blood lineages. In vertebrates, HSC development is a stepwise process, coordinately regulated by chromatin architectures and a group of transcriptional and epigenetic regulators. A deeper understanding of the molecular mechanisms governing the generation, expansion, and function of HSCs holds great promise in the generation and expansion of engraftable HSCs in vitro for clinical applications. This study reviewed recent advances in transcriptional and epigenetic control of hematopoietic stem cell fate decisions in vertebrates.

Cyanate ester resin based composites with high toughness and thermal conductivity.

A new cyanate ester resin-based composite with higher toughness and thermal conductivity was developed. First, a poly(n-butyl acrylate)/poly(methyl methacrylate-co-acrylamide) (PBMAM) core-shell structured latex was prepared by seeded emulsion polymerization. Second, hexagonal boron nitride (h-BN) particles were modified by a surface coupling agent, 3-(2-amino ethyl amino)propyl trioxysilane, to improve the dispersion in cyanate ester resin (BADCy). Third, PBMAM and the modified boron nitride were mixed with BADCy resin to increase mechanical properties and thermal conductivity. The monomer conversion in the emulsion polymerization process of the PBMAM was monitored by determining the solid content. Its particle size was characterized by dynamic laser scattering, and the morphology of the particles was characterized using scanning and transmission electron microscopes. The modified boron nitride (ABN) was verified by FTIR and TGA measurements. The mechanical properties and thermal conductivity of the BADCy/PBMAM/ABN composites were determined at various BN contents. Results showed that the unnotched impact strength of the composite increased by 151% and the thermal conductivity increased by 85% at a PBMAM content of 5 wt% and ABN content of 6 wt%. With the enhanced properties and ease of fabrication, the developed composites have good potential for application in high-end industries such as microelectronic packaging.

[Descending branch of anterior lateral malleolar artery based anterograde island flaps for reconstruction of foot and ankle defects].

OBJECTIVE: To explore surgical method and clinical effects of descending branch of the anterior lateral malleolar artery based anterograde island flap for repairing foot and ankle wounds. METHODS: Nine patients with skin defects of foot and ankle repaired by descending branch of the anterior lateral malleolar artery based anterograde island flap were studied from June 2015 to January 2017, including 6 males and 3 females aged from 32 to 63 years old. The wound were located on foot and ankle and associated with exposure of bone, tendon, blood vessels or nerves. The surface of wound located on foot in 6 patients, and 3 patients in ankle joint. The area of defect ranged from 1.5 cm×2.0 cm to 6.0 cm×13.0 cm, and the area of flap ranged from 2.0 cm×3.0 cm to 7.0 cm×15.0 cm. The donor site was skin grafted with split-thickness skin from abdomen. Appearance, texture, condition of donor site of island flaps after operation were observed, satisfied degree of clinical effects were evaluated by ZHANG Hao's evaluation, and AOFAS score were used to evaluate function. RESULTS: Circulations of flaps in 9 cases were stable without blockage, and healed well at 2 weeks after operation. All patients were followed up from 2 to 18 months with an average of(8.0±2.3) months. All flap were survived at stage I, pedicles looked smooth and tidy, no cat-ear formed, the texture of flap was soft with satisfied appearance, the color was near to surrounding skin. The surface of wound were tidy after skin graft of donor sites without scar hypertrophy. Nine patients got satisfied results according to ZHANG Hao's evaluation, and AOFAS score was excellent. CONCLUSIONS: Descending branch of the anterior lateral malleolar artery based anterograde island flap for repairing foot and ankle wounds, which has advantages of protect main vessel, thin flap, is a simple and effective method.

Anatomical feasibility study of flexor hallucis longus transfer in treatment of Achilles tendon and posteromedial portal of ankle arthroscopy.

PURPOSE: The aim of this study was to evaluate the occurrence of anatomical variations of the musculotendinous junction of the flexor hallucis longus (FHL) muscle, the relationship between FHL tendon or muscle and the tibial neurovascular bundle at the level of the posterior ankle joint in human cadavers. METHODS: Seventy embalmed feet from 20 male and 15 female cadavers, the cadavers' mean age was 65.4 (range from 14 to 82) years, were dissected and anatomically classified to observe FHL muscle morphology define the relationship between FHL tendon or muscle and the tibial neurovascular bundle. The distance between the musculotendinous junction and the relationship between FHL tendon or muscle and the tibial neurovascular bundle was determined. RESULTS: Three morphology types of FHL muscle were identified: a long lateral and shorter medial muscle belly, which was observed in 63 specimens (90%); equal length medial and lateral muscle bellies, this variant was only observed in five specimens (7.1%); one lateral and no medial muscle belly, which was observed in two specimens (2.9%). No statistically significant difference was observed according to gender or side (p > 0.05). Two patterns were identified and described between FHL tendon or muscle and the tibial neurovascular bundle. Pattern 1, the distance between the neurovascular bundle and FHL tendon was 3.46 mm (range 2.34-8.84, SD = 2.12) which was observed in 66 specimens (94.3%); Pattern 2, there was no distance which was observed in four specimens (5.7%). CONCLUSION: Knowing FHL muscle morphology, variations provide new important insights into secure planning and execution of a FHL transfer for Achilles tendon defect as well as for the interpretation of ultrasound and magnetic resonance images. With posterior arthroscopic for the treatment of various ankle pathologies, posteromedial portal may be introduced into the posterior aspect of the ankle without gross injury to the tibial neurovascular structures because of the gap between the neurovascular bundle and FHL tendon.

Sources of particulate matter in China: Insights from source apportionment studies published in 1987-2017.

Particulate matter (PM) in the atmosphere has adverse effects on human health, ecosystems, and visibility. It also plays an important role in meteorology and climate change. A good understanding of its sources is essential for effective emission controls to reduce PM and to protect public health. In this study, a total of 239 PM source apportionment studies in China published during 1987-2017 were reviewed. The documents studied include peer-reviewed papers in international and Chinese journals, as well as degree dissertations. The methods applied in these studies were summarized and the main sources in various regions of China were identified. The trends of source contributions at two major cities with abundant studies over long-time periods were analyzed. The most frequently used methods for PM source apportionment in China are receptor models, including chemical mass balance (CMB), positive matrix factorization (PMF), and principle component analysis (PCA). Dust, fossil fuel combustion, transportation, biomass burning, industrial emission, secondary inorganic aerosol (SIA) and secondary organic aerosol (SOA) are the main source categories of fine PM identified in China. Even though the sources of PM vary among seven different geographical areas of China, SIA, industrial, and dust emissions are generally found to be the top three source categories in 2007-2016. A number of studies investigated the sources of SIA and SOA in China using air quality models and indicated that fossil fuel combustion and industrial emissions were the most important sources of SIA (total contributing 63.5%-88.1% of SO42-, and 47.3%-70% NO3-), and agriculture emissions were the dominant source of NH4+ (contributing 53.9%-90%). Biogenic emissions were the most important source of SOA in China in summer, while residential and industrial emissions were important in winter. Long-term changes of PM sources at two megacities of Beijing and Nanjing indicated that the contributions of fossil fuel and industrial sources have been declining after stricter emission controls in recent years. In general, dust and industrial contributions decreased and transportation contributions increased after 2000. PM2.5 emissions are predicted to decline in most regions during 2005-2030, even though the energy consumptions except biomass burning are predicted to continue to increase. Industrial, residential, and biomass burning sources will become more important in the future in the businuess-as-usual senarios. This review provides valuable information about main sources of PM and their trends in China. A few recommendations are suggested to further improve our understanding the sources and to develop effective PM control strategies in various regions of China.

Robust Macroscopic 3D Sponges of Manganese Oxide Molecular Sieves.

The construction of macroscopic 3D sponges is of great technological importance for various applications. An outstanding challenge is the facile fabrication of sponges with the desirable combination of good stability, high electrical conductivity, and absorption ability. Here free-standing 3D OMS-2 sponges are demonstrated, with various densities, which possess a combination of desirable physical properties including high porosity, robustness, permeability, recyclability, high electrical conductivity, and selective water absorption in preference to oil. Some of these properties have systematic trends with various densities. The stress of the OMS-2 sponge, made by nanowire-based freeze-drying process, is four orders of magnitude higher than that made by calcination-related process. These new materials should find practical applications in environmental, catalysis, sensing, absorption, and energy storage, particularly in the removal of water spill cleanup, and beyond.

Efficacy and safety of bisphosphonates in management of low bone density in inflammatory bowel disease: A meta-analysis.

This study aims to determine whether bisphosphonates are safe, as well as effective against bone mineral loss in inflammatory bowel disease (IBD). A computerized search of electronic databases from 1966 to 2016 was performed. Randomized controlled trials (RCTs) were included in this review to evaluate the role of bisphosphonates in the management of osteoporosis in IBD patients. A revised 7-point Jadad scale was used to evaluate the quality of each study. Overall, 13 RCTs and 923 patients met the inclusion criteria of this meta-analysis. The result showed that bisphosphonates decreased bone mass density (BMD) loss at the lumbar spine (P = 0.0002), reduced the risk of new fractures (P = 0.01), and retained the similar adverse events (P = 0.86). Bisphosphonates may provide protection and safety against bone mineral loss in IBD patients.

Neglected Achilles Tendon Rupture Treated with Flexor Hallucis Longus transfer with two turndown gastrocnemius fascia flap and reinforced with plantaris tendon.

Neglected Achilles Tendon Ruptures are commonly seen by orthopaedic surgeons. In cases resistant to conservative treatment, a variety of surgical procedures have been utilized in the past. The senior -surgeon at our institution has utilized a technique -employing two turndown fascia flaps fashioned from the proximal Achilles tendon augmented by a tenomyodesis of the flexor hallucis longus and plantaris tendon. The purpose of this study was to assess the clinical outcome of all patients who underwent this procedure. The medical records of 10 cases that underwent this procedure were retrospectively reviewed. We completed data collection sets using the American Orthopaedic Foot and Ankle Society ankle-hind foot scores, isokinetic evaluation, and postoperative magnetic resonance imaging (MRI) at 1 year of follow-up. The mean American Orthopaedic Foot and Ankle Society ankle-hind foot scores improved from 64.4±3.54. Isokinetic testing at 30º/sec and 120º/sec revealed an mean deficits of 24.5%, respectively, in the plantar flexion peak torque of the involved ankle than non-involved ankle. The flexor hallucis longus tendon, gastrocnemius fascia flap and plantaris were well -integrated into the Achilles tendon forming a homogenous tendon, which was confirmed in MRI. Our subjective and objective data indicate that the reconstructive technique using flexor hallucis longus transfer with two turndown gastrocnemius fascia flaps and plantaris tendon is a good option for repairing large gap defect of Achilles tendon.

Numerical study of the effects of Planetary Boundary Layer structure on the pollutant dispersion within built-up areas.

The effects of different Planetary Boundary Layer (PBL) structures on pollutant dispersion processes within two idealized street canyon configurations and a realistic urban area were numerically examined by a Computational Fluid Dynamics (CFD) model. The boundary conditions of different PBL structures/conditions were provided by simulations of the Weather Researching and Forecasting model. The simulated results of the idealized 2D and 3D street canyon experiments showed that the increment of PBL instability favored the downward transport of momentum from the upper flow above the roof to the pedestrian level within the street canyon. As a result, the flow and turbulent fields within the street canyon under the more unstable PBL condition are stronger. Therefore, more pollutants within the street canyon would be removed by the stronger advection and turbulent diffusion processes under the unstable PBL condition. On the contrary, more pollutants would be concentrated in the street canyon under the stable PBL condition. In addition, the simulations of the realistic building cluster experiments showed that the density of buildings was a crucial factor determining the dynamic effects of the PBL structure on the flow patterns. The momentum field within a denser building configuration was mostly transported from the upper flow, and was more sensitive to the PBL structures than that of the sparser building configuration. Finally, it was recommended to use the Mellor-Yamada-Nakanishi-Niino (MYNN) PBL scheme, which can explicitly output the needed turbulent variables, to provide the boundary conditions to the CFD simulation.

[The anatomy and clinical application of reverse saphenous nerve neurocutaneous flaps for reparing skin defects of forefoot].

OBJECTIVE: To investigate the effect of reverse saphenous nerve neurocutaneous flaps for skin defects of forefoot. METHODS: In the anatomic study, 50 cadaveric feet were injected with red latex and the anastomosis, distribution and external diameters of medialtarsal artery, medial anterior malleolus artery, medial plantar artery, the superficial branch of the medial basal hallucal artery and saphenousnerve nutritional vessels were observed. Based on anatomic research results, we designed the reverse saphenous nerve neurocutaneous flaps for repairing skin defects of forefoot. RESULTS: The blood supply of reverse saphenous nerve neurocutaneous flaps were based on the vasoganglion, which consist of arterial arch at the superior border of abductor hallucis and arterial network on the surface of abductor hallucis around the saphenous nerve and medial pedis flap. From Oct. 2006 to Oct. 2011, the reverse saphenous nerve neurocutaneous flaps were used to repair skin defects of forefoot in 11 cases. The flap size ranged from 2.5 cm x 3.5 cm to 7.5 cm x 8.5 cm. The wounds at donor site were covered with full-thickness skin graft. All flaps survived completely with no ulcer at the donor site. 11 cases were followed up for 6 to 18 months( mean, 10 months). The skin color and texture were satisfactory. The patients could walk very well. CONCLUSIONS: It is reliable to repair the skin defects of forefoot with reverse saphenous nerve neurocutaneous flaps. It is easily performed with less morbidity. This flap should be considered as a preferential way to reconstruct skin defects of forefoot.

Minimally invasive technique for medial subtalar dislocation associated with navicular and entire posterior talar process fracture: a case report.

This is a case report of 31-year-old woman who sustained medial subtalar dislocation with navicular and entire posterior talar process fracture. After closed reduction of the subtalar dislocation, compute tomography (CT) demonstrated that the talus fracture involved the entire posterior process and navicular. The fracture of the talus was fixed with a cannulated screw and the navicular was held with two K-wires to the main body using with a minimally invasive approach. Follow-up revealed that the functional and radiographic results were graded as good.

[Percutaneous fixation for the treatment of un-displaced scaphoid fractures with herbert cannulated screws through volar approach].

OBJECTIVE: To summarize the experience of percutaneous fixation of scaphoid fractures with Herbert screws through volar approach, and provide a reliable and efficient treatment method for scaphoid fractures. METHODS: From April 2008 to September 2012,15 patients with scaphoid fractures were treated by percutaneous fixation with Herbert cannulated screws through volar approach including 14 males and 1 female with an average age of 35 years ranging from 25 to 45 years old. Among them, 10 cases were on left side and 5 cases were on right side. Durations from injury to operation ranged from 3 to 10 days with an average of 5 days. All these cases were identified as B2 type according to the Herbert classification based on X-ray and CT scan. In order to assess the function of wrist, all patients were calculated according to Krimmer's score postoperatively. RESULTS: The follow-up period were from 5 to 18 months with an average of 10 months. At 3 months after operation,X-ray was re-checked every month. All the patients achieved bone union with a mean time of 10 weeks (ranged from 7 to 14 weeks) postoperatively. According to Krimmer's score, 14 cases gained 100 scores as perfect and one case got 90 scores as good. The small volar incision of all patients were union at the first period. No operation complications such as infection and nonunion occurred. CONCLUSION: Percutaneous fixation with Herbert cannulated screws through volar approach is a reliable and efficient treatment method for scaphoid fractures with small invasion, high bone union rate, and fewer complications.

[Design and clinical application of surgical device for closed reduction of tibial fracture].

OBJECTIVE: To describe a surgical device for dosed reduction of tibial fracture and investigate its clinical effectiveness. METHODS: Between June 2010 and December 2012, 24 cases of tibial fractures were treated with intramedullary nailing using a surgical device for closed reduction. There were 18 males and 6 females with an average age of 40 years (range, 20-64 years). All fractures were closed. There were 3 proximal third fractures, 12 middle third fractures, and 9 distal third fractures. According to AO classification, 12 cases were classified as type A, 8 cases as type B, and 4 cases as type C. The mean time between injury and operation was 3 days (range, 1-12 days). The intraoperative fluoroscopy frequency to confirm closed reduction and guide wire passing the fracture site, and the duration between fracture reduction and nail insertion were recorded. The injured limb alignment and fracture angular deformity were measured as described by Freedman et al. The fuction of affected limb was estimated by Johner-Wruhs criteria. RESULTS: Closed reduction was successfully performed in 24 patients. The mean fluoroscopy frequency to confirm closed reduction was 3 (range, 2-5). The fluoroscopy frequency to confirm guide wire passing the fracture site was 2. The mean duration between fracture reduction and nail insertion was 30 minutes (range, 20-42 minutes). No intraoperative or postoperative complication occurred, such as infection, vessel and nerve injuries. All incisions healed by first intention. Seventeen patients were followed up 6-16 months (mean, 10 months). Radiographic evidence showed that bridging callous was observed at 2-4 months (mean, 2.5 months). The injured limb alignment was normal on anteroposterial and lateral radiographs at 5 months postoperatively, no malalignment and obvious angular deformity was observed. The internal fixator had good position. According to Johner-Wruhs criteria for evaluation of the affected limb function, the results were excellent in 12 cases and good in 5 cases with an excellent and good rate of 100%. CONCLUSION: The surgical device for closed reduction of tibial fracture is simple and easy to use, and has good effectiveness combined with intramedullary nailing.