Electronic-grade epitaxial (111) KTaO3 heterostructures.

KTaO3 heterostructures have recently attracted attention as model systems to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating heterostructure interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on high-quality epitaxial (111) KTaO3 thin films using an adsorption-controlled hybrid PLD to overcome the vapor pressure mismatch. Electrical and structural characterizations reveal that the higher-quality heterostructure interface between amorphous LaAlO3 and KTaO3 thin films supports a two-dimensional electron gas with substantially higher electron mobility, superconducting transition temperature, and critical current density than that in bulk single-crystal KTaO3-based heterostructures. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods.

Quantitative predictive theories through integrating quantum, statistical, equilibrium, and nonequilibrium thermodynamics.

Today's thermodynamics is largely based on the combined law for equilibrium systems and statistical mechanics derived by Gibbs in 1873 and 1901, respectively, while irreversible thermodynamics for nonequilibrium systems resides essentially on the Onsager Theorem as a separate branch of thermodynamics developed in 1930s. Between them, quantum mechanics was invented and quantitatively solved in terms of density functional theory (DFT) in 1960s. These three scientific domains operate based on different principles and are very much separated from each other. In analogy to the parable of the blind men and the elephant articulated by Perdew, they individually represent different portions of a complex system and thus are incomplete by themselves alone, resulting in the lack of quantitative agreement between their predictions and experimental observations. Over the last two decades, the author's group has developed a multiscale entropy approach (recently termed as zentropy theory) that integrates DFT-based quantum mechanics and Gibbs statistical mechanics and is capable of accurately predicting entropy and free energy of complex systems. Furthermore, in combination with the combined law for nonequilibrium systems presented by Hillert, the author developed the theory of cross phenomena beyond the phenomenological Onsager Theorem. The zentropy theory and theory of cross phenomena jointly provide quantitative predictive theories for systems from electronic to any observable scales as reviewed in the present work.

China Medicinal Plants of the Ampelopsis grossedentata-A Review of Their Botanical Characteristics, Use, Phytochemistry, Active Pharmacological Components, and Toxicology.

Ampelopsis grossedentata (AG) is mainly distributed in Chinese provinces and areas south of the Yangtze River Basin. It is mostly concentrated or scattered in mountainous bushes or woods with high humidity. Approximately 57 chemical components of AG have been identified, including flavonoids, phenols, steroids and terpenoids, volatile components, and other chemical components. In vitro studies have shown that the flavone of AG has therapeutic properties such as anti-bacteria, anti-inflammation, anti-oxidation, enhancing immunity, regulating glucose and lipid metabolism, being hepatoprotective, and being anti-tumor with no toxicity. Through searching and combing the related literature, this paper comprehensively and systematically summarizes the research progress of AG, including morphology, traditional and modern uses, chemical composition and structure, and pharmacological and toxicological effects, with a view to providing references for AG-related research.

Radical Phosphorylation of Aliphatic C-H Bonds via Iron Photocatalysis.

The synthesis of tertiary phosphines(III) has been a long-standing challenge in synthetic chemistry because of inevitable issues including harsh conditions, sensitive organometallic reagents, and prefunctionalized substrates in traditional synthesis. Herein, we report a strategically novel C(sp3)-H bond phosphorylation that enables the assembly of structurally diverse tertiary phosphines(III) from industrial phosphine(III) sources under mild photocatalytic conditions. The merger of ligand-to-metal charge transfer (LMCT) of FeCl3 with the hydrogen atom-transfer (HAT) process is the key for the generation of alkyl radicals from hydrocarbons. Strikingly, this catalytic system can be successfully applied for the polymerization of electron-deficient alkenes.

Organo-cyanamides: convenient reagents for catalytic amidation of carboxylic acids.

An unprecedented DMAP-catalysed amidation of aryl and alkyl carboxylic acids with organo-cyanamides has been developed. Unlike the use of N-cyano-N-phenyl-p-methylbenzenesulfonamide (NCTS) as an electrophilic cyanating reagent, an unusual desulfonylation/decyanation reaction model has been disclosed for the first time. Remarkable features of this reaction include readily available substrates, simple operation and broad scope, enabling the efficient synthesis of structurally diverse amides. The synthetic utility of this protocol was demonstrated by the late-stage amidation of bioactive carboxylic acids and a scale-up reaction.

Salt-Assisted Selective Growth of H-phase Monolayer VSe2 with Apparent Hole Transport Behavior.

Vanadium diselenide (VSe2) exhibits versatile electronic and magnetic properties in the trigonal prismatic (H-) and octahedral (T-) phases. Compared to the metallic T-phase, the H-phase with a tunable semiconductor property is predicted to be a ferrovalley material with spontaneous valley polarization. Herein we report an epitaxial growth of the monolayer 2D VSe2 on a mica substrate via the chemical vapor deposition (CVD) method by introducing salt in the precursor. Our first-principles calculations suggest that the monolayer H-phase VSe2 with a large lateral size is thermodynamically favorable. The honeycomb-like structure and the broken symmetry are directly observed by spherical aberration-corrected scanning transmission electron microscopy (STEM) and confirmed by giant second harmonic generation (SHG) intensity. The p-type transport behavior is further evidenced by the temperature-dependent resistance and field-effect device study. The present work introduces a new phase-stable 2D transition metal dichalcogenide, opening the prospect of novel electronic and spintronics device design.

Unexpected low thermal expansion coefficients of pentadiamond.

A new carbon allotrope, pentadiamond, was recently reported in the literature. Herein, we investigate its thermal expansion and thermoelastic properties by first principles. It is observed that the bulk modulus and hardness of pentadiamond are far less than those of diamond, but the thermal expansion of pentadiamond is lower than that of diamond in the range of 0 K to 2000 K, and even negative in the temperature range of 0-190 K. The negative thermal expansion at low temperature originates from the transverse vibrations of the edge-shared atoms in the coplanar double-pentagon. The low thermal expansion at high temperature is contributed by the strong bonds in pentadiamond. Benefiting from the low thermal expansion, the elastic constants of pentadiamond decrease very slowly with respect to temperature compared with those of diamond. The low sensitivity of thermodynamic and thermoelastic properties to temperature makes pentadiamond a promising material for high anti-thermal-shock and accurate electronic device applications.

Enhancing Moisture Stability of Sulfide Solid-State Electrolytes by Reversible Amphipathic Molecular Coating.

The all-solid-state battery (ASSB) is a promising next-generation energy storage technology for both consumer electronics and electric vehicles because of its high energy density and improved safety. Sulfide solid-state electrolytes (SSEs) have merits of low density, high ionic conductivity, and favorable mechanical properties compared to oxide ceramic and polymer materials. However, mass production and processing of sulfide SSEs remain a grand challenge because of their poor moisture stability. Here, we report a reversible surface coating strategy for enhancing the moisture stability of sulfide SSEs using amphipathic organic molecules. An ultrathin layer of 1-bromopentane is coated on the sulfide SSE surface (e.g., Li7P2S8Br0.5I0.5) via Van der Waals force. 1-Bromopentane has more negative adsorption energy with SSEs than H2O based on first-principles calculations, thereby enhancing the moisture stability of SSEs because the hydrophobic long-chain alkyl tail of 1-bromopentane repels water molecules. Moreover, this amphipathic molecular layer has a negligible effect on ionic conductivity and can be removed reversibly by heating at low temperatures (e.g., 160 °C). This finding opens a new pathway for the surface engineering of moisture-sensitive SSEs and other energy materials, thereby speeding up their deployment in ASSBs.

Deoxygenative gem-difluorovinylation of aliphatic alcohols.

An unprecedented deoxygenative gem-difluorovinylation of aliphatic alcohols using α-trifluoromethyl alkenes is achieved under photocatalytic conditions. Inexpensive Ph3P acts as an efficient O-atom transfer reagent to facilitate the deoxygenation of alcohols for the generation of reactive alkyl radical species. Remarkable features of this reaction include mild conditions, simple operation and broad scope. The synthetic utility of this reaction was validated by the success of two-step one-pot reactions, scale-up synthesis and chemoselective monodeoxygenation of diols.

Merging strain-release and copper catalysis: the selective ring-opening cross-coupling of 1,2-oxazetidines with boronic acids.

An unprecedented ring-opening cross-coupling of 1,2-oxazetidines with readily available arylboronic acids is achieved for the first time by copper catalysis. Unlike the known electrophilic oxygen reactivity in coupling with organometallic reagents, 1,2-oxazetidines were utilized as formaldimine precursors in this protocol. Remarkable features of this reaction include simple operation, inexpensive catalyst, broad scope and high regioselectivity, delivering a wide array of aminomethylation products. The practicality of this reaction was validated in the one-step downstream transformation of the obtained products into synthetically important molecules and late-stage modification of bioactive acids.

Atomic control of active-site ensembles in ordered alloys to enhance hydrogenation selectivity.

Intermetallic compounds offer unique opportunities for atom-by-atom manipulation of catalytic ensembles through precise stoichiometric control. The (Pd, M, Zn) γ-brass phase enables the controlled synthesis of Pd-M-Pd catalytic sites (M = Zn, Pd, Cu, Ag and Au) isolated in an inert Zn matrix. These multi-atom heteronuclear active sites are catalytically distinct from Pd single atoms and fully coordinated Pd. Here we quantify the unexpectedly large effect that active-site composition (that is, identity of the M atom in Pd-M-Pd sites) has on ethylene selectivity during acetylene semihydrogenation. Subtle stoichiometric control demonstrates that Pd-Pd-Pd sites are active for ethylene hydrogenation, whereas Pd-Zn-Pd sites show no measurable ethylene-to-ethane conversion. Agreement between experimental and density-functional-theory-predicted activities and selectivities demonstrates precise control of Pd-M-Pd active-site composition. This work demonstrates that the diversity and well-defined structure of intermetallics can be used to design active sites assembled with atomic-level precision.

Forming mechanism of equilibrium and non-equilibrium metallurgical phases in dissimilar aluminum/steel (Al-Fe) joints.

Forming metallurgical phases has a critical impact on the performance of dissimilar materials joints. Here, we shed light on the forming mechanism of equilibrium and non-equilibrium intermetallic compounds (IMCs) in dissimilar aluminum/steel joints with respect to processing history (e.g., the pressure and temperature profiles) and chemical composition, where the knowledge of free energy and atomic diffusion in the Al-Fe system was taken from first-principles phonon calculations and data available in the literature. We found that the metastable and ductile (judged by the presently predicted elastic constants) Al6Fe is a pressure (P) favored IMC observed in processes involving high pressures. The MoSi2-type Al2Fe is brittle and a strong P-favored IMC observed at high pressures. The stable, brittle η-Al5Fe2 is the most observed IMC (followed by θ-Al13Fe4) in almost all processes, such as fusion/solid-state welding and additive manufacturing (AM), since η-Al5Fe2 is temperature-favored, possessing high thermodynamic driving force of formation and the fastest atomic diffusivity among all Al-Fe IMCs. Notably, the ductile AlFe3, the less ductile AlFe, and most of the other IMCs can be formed during AM, making AM a superior process to achieve desired IMCs in dissimilar materials. In addition, the unknown configurations of Al2Fe and Al5Fe2 were also examined by machine learning based datamining together with first-principles verifications and structure predictions. All the IMCs that are not P-favored can be identified using the conventional equilibrium phase diagram and the Scheil-Gulliver non-equilibrium simulations.

Merging C-H Activation and Strain-Release in Ruthenium-Catalyzed Isoindolinone Synthesis.

The merger of strain-release of 1,2-oxazetidines with carboxylic acid directed C-H activation in catalytic synthesis of isoindolinones is reported for the first time. This reaction opens a new and sustainable avenue to prepare a range of structurally diverse isoindolinone skeletons from readily available benzoic acids. The success of late-stage functionalization of some bioactive acids, and concise synthesis of biologically important skeletons demonstrated its great synthetic potential in drug discovery. Mechanistic studies indicated a plausible C-H activation/ß-carbon elimination/intramolecular cyclization cascade pathway.

Correlation analysis of materials properties by machine learning: illustrated with stacking fault energy from first-principles calculations in dilute fcc-based alloys.

Advances in machine learning (ML), especially in the cooperation between ML predictions, density functional theory (DFT) based first-principles calculations, and experimental verification are emerging as a key part of a new paradigm to understand fundamentals, verify, analyze, and predict data, and design and discover materials. Taking stacking fault energy (γSFE) as an example, we perform a correlation analysis ofγSFEin dilute Al-, Ni-, and Pt-based alloys by descriptors and ML algorithms. TheseγSFEvalues were predicted by DFT-based alias shear deformation approach, and up to 49 elemental descriptors and 21 regression algorithms were examined. The present work indicates that (i) the variation ofγSFEaffected by alloying elements can be quantified through 14 elemental attributes based on their statistical significances to decrease the mean absolute error (MAE) in ML predictions, and in particular, the number of p valence electrons, a descriptor second only to the covalent radius in importance to model performance, is unexpected; (ii) the alloys with elements close to Ni and Co in the periodic table possess higherγSFEvalues; (iii) the top four outliers of DFT predictions ofγSFEare for the alloys of Al23La, Pt23Au, Ni23Co, and Al23Be based on the analyses of statistical differences between DFT and ML predictions; and (iv) the best ML model to predictγSFEis produced by Gaussian process regression with an average MAE < 8 mJ m-2. Beyond detailed analysis of the Al-, Ni-, and Pt-based alloys, we also predict theγSFEvalues using the present ML models in other fcc-based dilute alloys (i.e., Cu, Ag, Au, Rh, Pd, and Ir) with the expected MAE < 17 mJ m-2and observe similar effects of alloying elements onγSFEas those in Pt23X or Ni23X.

Preferential uptake of antibody targeted calcium phosphosilicate nanoparticles by metastatic triple negative breast cancer cells in co-cultures of human metastatic breast cancer cells plus bone osteoblasts.

Calcium phosphosilicate nanoparticles (CPSNPs) are bioresorbable nanoparticles that can be bioconjugated with targeting molecules and encapsulate active agents and deliver them to tumor cells without causing damage to adjacent healthy tissue. Data obtained in this study demonstrated that an anti-CD71 antibody on CPSNPs targets these nanoparticles and enhances their internalization by triple negative breast cancer cells in-vitro. Caspase 3,7 activation, DNA damage, and fluorescent microscopy confirmed the apoptotic breast cancer response caused by targeted anti-CD71-CPSNPs encapsulated with gemcitabine monophosphate, the active metabolite of the chemotherapeutic gemcitabine used to treat cancers including breast and ovarian. Targeted anti-CD71-CPSNPs encapsulated with the fluorophore, Rhodamine WT, were preferentially internalized by breast cancer cells in co-cultures with osteoblasts. While osteoblasts partially internalized anti-CD71-GemMP-CPSNPs, their cell growth was not affected. These results suggest that CPSNPs may be used as imaging tools and selective drug delivery systems for breast cancer that has metastasized to bone.

Ru-catalysed C(sp2)-H vinylation/annulation of benzoic acids and alkynes: rapid access to medium-sized lactones.

An unprecedented ruthenium catalysed [4+4] annulation of readily available benzoic acids and alkynes is reported for the first time. The carboxylate group acts as both a directing group and an internal nucleophilic reagent to facilitate a C(sp2)-H vinylation/annulation cascade. This reaction avoids the classically oxidative [4+2] annulation, allowing the efficient synthesis of a wide array of eight-membered lactones under oxidant-free conditions. Moreover, this catalytic system can be successfully extended to [4+3] and [4+5] annulations for the assembly of seven- and nine-membered lactones.

Realization of Epitaxial Thin Films of the Topological Crystalline Insulator Sr3 SnO.

Topological materials are derived from the interplay between symmetry and topology. Advances in topological band theories have led to the prediction that the antiperovskite oxide Sr3 SnO is a topological crystalline insulator, a new electronic phase of matter where the conductivity in its (001) crystallographic planes is protected by crystallographic point group symmetries. Realization of this material, however, is challenging. Guided by thermodynamic calculations, a deposition approach is designed and implemented to achieve the adsorption-controlled growth of epitaxial Sr3 SnO single-crystal films by molecular-beam epitaxy (MBE). In situ transport and angle-resolved photoemission spectroscopy measurements reveal the metallic and electronic structure of the as-grown samples. Compared with conventional MBE, the used synthesis route results in superior sample quality and is readily adapted to other topological systems with antiperovskite structures. The successful realization of thin films of Sr3 SnO opens opportunities to manipulate topological states by tuning symmetries via strain engineering and heterostructuring.

Single Electron Activation of Aryl Carboxylic Acids.

Aryl carboxylic acids are stable and readily available in great structural diversity both from natural and well-established synthetic procedures, which make them promising starting materials in organic synthesis. The conversion of benzoic acids into high-value molecules is of great importance and have gained much interest of synthetic chemists. The recent development of single-electron (1e-) activation strategy has been esteemed as a complementary method for the transformation of benzoic acids. In this context, carboxylate groups can be selectively transferred into reactive aryl carboxylic radical, aryl radical, and acyl radical by electrocatalysis, photocatalysis, or in the presence of some SET oxidants. Based on these radical species, remarkable advancements have been achieved for the rapid formation of various chemical bonds over the past 10 years. In this review, we summarize recent advances in single electron activation of aryl carboxylic acids, with an emphasis on reaction scope, catalytic system, limitation, and underlying reaction mechanism.

Local electronic descriptors for solute-defect interactions in bcc refractory metals.

The interactions between solute atoms and crystalline defects such as vacancies, dislocations, and grain boundaries are essential in determining alloy properties. Here we present a general linear correlation between two descriptors of local electronic structures and the solute-defect interaction energies in binary alloys of body-centered-cubic (bcc) refractory metals (such as W and Ta) with transition-metal substitutional solutes. One electronic descriptor is the bimodality of the d-orbital local density of states for a matrix atom at the substitutional site, and the other is related to the hybridization strength between the valance sp- and d-bands for the same matrix atom. For a particular pair of solute-matrix elements, this linear correlation is valid independent of types of defects and the locations of substitutional sites. These results provide the possibility to apply local electronic descriptors for quantitative and efficient predictions on the solute-defect interactions and defect properties in alloys.