RESUMO
In this study, we conducted experimental and Monte Carlo simulation studies in the grand canonical ensemble (GCMC) to investigate the role of molecular orientation and surface heterogeneity on the adsorption of N2 at 77 K. Our research focused on a series of ordered nanoporous materials (SBA-15) with varying degrees of oxygen functionalities. Specifically, we examined the effects of surface heterogeneity on the calculation of pore size distribution (PSD) and the Brunauer-Emmett-Teller (BET) area of porous materials. To provide a comprehensive perspective, we compared our results with three levels of surface oxidation, including a pristine case without any surface oxidation. The results from both our experimental and simulation data reveal the importance of chemical heterogeneity in determining equilibrium properties such as molecular packing within the pores, differential enthalpies of adsorption, and N2 orientation distribution. Our findings suggest that accurate characterization of surface heterogeneity is crucial for understanding gas adsorption in nanoporous materials and for developing better models for predicting their performance in various applications. Moreover, our simulations revealed substantial changes in the molecular orientation of adsorbate particles with increasing surface heterogeneity. This insight provides valuable information about the behavior of molecules within the nanoporous materials, further enhancing our understanding of the complex adsorption processes in these systems.
RESUMO
Physisorption using gas or vapor probe molecules is the most common characterization technique for porous materials. The method provides textural information on the adsorbent as well as the affinity for a specific adsorbate, typically through equilibrium pressure measurements. Here, we demonstrate how low-field NMR can be used to measure full adsorption isotherms, and how by selectively measuring 1H spins of the adsorbed probe molecules, rather than those in the vapor phase, this "NMR-relaxorption" technique provides insights about local dynamics beyond what can be learned from physisorption alone. The potential of this double-barreled approach was illustrated for a set of microporous metal-organic frameworks (MOFs). For methanol adsorption in ZIF-8, the method identifies multiple guest molecules populations assigned to MeOH clusters in the pore center, MeOH bound at cage windows and to MeOH adsorption on defect sites. For UiO-66(Zr), the sequential pore filling is demonstrated and accurate pore topologies are directly obtained, and for MIL-53(Al), structural phase transitions are accurately detected and linked with two populations of dimeric chemical species localized to specific positions in the framework.
RESUMO
Defect engineering and metal encapsulation are considered as valuable approaches to fine-tune the reactivity of metal-organic frameworks. In this work, various MOF-808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF-808 is quantified with water adsorption and CO2 adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF-808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.
RESUMO
Metal-organic frameworks are widely considered for the separation of chemical mixtures due to their adjustable physical and chemical properties. However, while much effort is currently devoted to developing new adsorbents for a given separation, an ideal scenario would involve a single adsorbent for multiple separations. Porous materials exhibiting framework flexibility offer unique opportunities to tune these properties since the pore size and shape can be controlled by the application of external stimuli. Here, we establish a proof-of-concept for the molecular sieving separation of species with similar sizes (CO2/N2 and CO2/CH4), via precise mechanical control of the pore size aperture in a flexible metal-organic framework. Besides its infinite selectivity for the considered gas mixtures, this material shows excellent regeneration capability when releasing the external mechanical constraint. This strategy, combining an external stimulus applied to a structurally compliant adsorbent, offers a promising avenue for addressing some of the most challenging gas separations.
RESUMO
In this study adsorption microcalorimetry is employed to monitor the adsorption of four probes (argon, oxygen, nitrogen, and carbon monoxide) on a highly flexible mesoporous metal-organic framework (DUT-49, DUT = Dresden University of Technology), precisely measuring the differential enthalpy of adsorption alongside high-resolution isotherms. This experimental approach combined with force field Monte Carlo simulations reveals distinct pore filling adsorption behaviors for the selected probes, with argon and oxygen showing abrupt adsorption in the open pore form of DUT-49, in contrast with the gradual filling for nitrogen and carbon monoxide. A complex structural transition behavior of DUT-49 observed upon nitrogen adsorption is elucidated through an isotherm deconvolution in order to quantify the fractions of the open pore, contracted pore, and intermediate pore forms that coexist at a given gas pressure. Finally, the heat flow measured during the guest-induced structural contraction of DUT-49 allowed an exploration of complex open-contracted pore transition energetics, leading to a first assessment of the energy required to induce this spectacular structural change.
RESUMO
Framework materials at the molecular level, such as metal-organic frameworks (MOF), were recently found to exhibit exotic and counterintuitive micromechanical properties. Stimulated by host-guest interactions, these so-called soft porous crystals can display counterintuitive adsorption phenomena such as negative gas adsorption (NGA). NGA materials are bistable frameworks where the occurrence of a metastable overloaded state leads to pressure amplification upon a sudden framework contraction. How can we control activation barriers and energetics via functionalization of the molecular building blocks that dictate the frameworks' mechanical response? In this work we tune the elastic and inelastic properties of building blocks at the molecular level and analyze the mechanical response of the resulting frameworks. From a set of 11 frameworks, we demonstrate that widening of the backbone increases stiffness, while elongation of the building blocks results in a decrease in critical yield stress of buckling. We further functionalize the backbone by incorporation of sp3 hybridized carbon atoms to soften the molecular building blocks, or stiffen them with sp2 and sp carbons. Computational modeling shows how these modifications of the building blocks tune the activation barriers within the energy landscape of the guest-free bistable frameworks. Only frameworks with free energy barriers in the range of 800 to 1100 kJ mol-1 per unit cell, and moderate yield stress of 0.6 to 1.2 nN for single ligand buckling, exhibit adsorption-induced contraction and negative gas adsorption. Advanced experimental in situ methodologies give detailed insights into the structural transitions and the adsorption behavior. The new framework DUT-160 shows the highest magnitude of NGA ever observed for nitrogen adsorption at 77 K. Our computational and experimental analysis of the energetics and mechanical response functions of porous frameworks is an important step towards tuning activation barriers in dynamic framework materials and provides critical design principles for molecular building blocks leading to pressure amplifying materials.
RESUMO
Zeolitic imidazolate frameworks (ZIFs) are a sub-class of metal-organic frameworks (MOFs). Although generally stable, ZIFs can undergo post-synthetic linker exchange (PSLE) in solution under mild conditions. Herein, we present a novel, solvent-free approach to post-synthetic linker exchange through exposure to linker vapor.
RESUMO
Switchable metal-organic frameworks (MOFs) have been proposed for various energy-related storage and separation applications, but the mechanistic understanding of adsorption-induced switching transitions is still at an early stage. Here we report critical design criteria for negative gas adsorption (NGA), a counterintuitive feature of pressure amplifying materials, hitherto uniquely observed in a highly porous framework compound (DUT-49). These criteria are derived by analysing the physical effects of micromechanics, pore size, interpenetration, adsorption enthalpies, and the pore filling mechanism using advanced in situ X-ray and neutron diffraction, NMR spectroscopy, and calorimetric techniques parallelised to adsorption for a series of six isoreticular networks. Aided by computational modelling, we identify DUT-50 as a new pressure amplifying material featuring distinct NGA transitions upon methane and argon adsorption. In situ neutron diffraction analysis of the methane (CD4) adsorption sites at 111 K supported by grand canonical Monte Carlo simulations reveals a sudden population of the largest mesopore to be the critical filling step initiating structural contraction and NGA. In contrast, interpenetration leads to framework stiffening and specific pore volume reduction, both factors effectively suppressing NGA transitions.
RESUMO
The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. Recent research has revealed solid-liquid transitions within the family, which we use here to create a class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of MOF crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. The coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the interfacial interactions between the closely contacted microdomains improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling in the presence of water, is stabilised at room temperature in the crystal-glass composite. This leads to a significant improvement of CO2 adsorption capacity.
RESUMO
Three promising MOF candidates, UiO-66(Zr), MIL-100(Fe) and MIL-127(Fe) are shaped through granulation with a ρ-alumina binder. Subsequently, changes in the surface characteristics and adsorption performance are evaluated through adsorption microcalorimetry at 303 K with several common probes (N2, CO2, CO, CH4, C2H6, C3H8, C3H6 and C4H10), generating a detailed picture of adsorbate-adsorbent interactions. Vapour adsorption experiments with water and methanol were further used to gauge changes in hydrophobicity caused by the addition of the alumina binder. Upon shaping, a decrease in gravimetric capacity and specific surface area is observed, accompanied by an increased capacity on a volumetric basis, attributed to densification induced by the shaping process, as well as a surprising lack of pore environment changes. However, the magnitude of these effects depends on the MOF, suggesting a high dependence on material structure. Out of the three materials, MIL-127(Fe) shows the least changes in adsorption performance and is highlighted as a promising candidate for further study.
RESUMO
Nanoparticulate powders are increasingly found in the workplace. Inhalation exposure to airborne nanoparticles (NPs) is possible throughout the life-cycle of the powders. As the toxicity of NPs has never been demonstrated, it remains essential to evaluate the risks associated with NPs in order to propose preventative measures. The first step of a risk assessment strategy consists in the identification of the 'nano' nature of a material, which suffers from a lack of an operational methodology. Here, we present a simplified and operational strategy relying on the volume specific surface area (VSSA) for nanomaterial identification, based on the recommendation stemming from the European Commission and previous work on this topic from the European Project Nanodefine. The proposed strategy was tested on a set of 15 representative industrial powders (TiO2, SiO2, CuO, and ZnO), covering a wide range of properties, and previous published data. The VSSA classification was validated via a comparison with the particle size obtained by transmission electron microscopy (TEM). It was evidenced that the VSSA is in accordance with particle size for nanomaterial powder classification. The proposed methodology involves relatively accessible methods such as thermogravimetric analysis, nitrogen adsorption and helium pycnometry and limits the detection of false negatives. Moreover, it does not imply systematic confirmation of the results with the reference particle size criterion. Our results suggest that the VSSA is a promising parameter to be used for risk assessment and should be further investigated on powder mixings to confirm its relevancy to define nanomaterial powders.
RESUMO
The present work shows the synthesis of nano-sized hybrid zeolitic imidazolate frameworks (ZIFs) with the rho topology based on a mixture of the linkers benzimidazole (bIm) and 4-methyl-5-imidazolecarboxaldehyde (4-m-5-ica). The hybrid ZIF was obtained by post-synthetic modification of ZIF-93 in a bIm solution. The use of different solvents, MeOH and N,N-dimethylacetamide (DMAc), and reaction times led to differences in the quantity of bIm incorporated to the framework, from 7.4 to 23 % according to solution-state NMR spectroscopy. XPS analysis showed that the mixture of linkers was also present at the surface of the particles. The inclusion of bIm to the ZIF-93 nanoparticles improved the thermal stability of the framework and also increased the hydrophobicity according to water adsorption results. N2 and CO2 adsorption experiments revealed that the hybrid material has an intermediate adsorption capacity, between those of ZIF-93 and ZIF-11. Finally, ZIF-93/11 hybrid materials were applied as fillers in polybenzimidazole (PBI) mixed matrix membranes (MMMs). These MMMs were used for H2 /CO2 separation (at 180 °C) reaching values of 207â Barrer of H2 and a H2 /CO2 selectivity of 7.7 that clearly surpassed the Robeson upper bound (corrected for this temperature).
RESUMO
Because of their high tunability and surface area, metal-organic frameworks (MOFs) show great promise as supports for metal nanoparticles. Depending on the synthesis route, MOFs may contain defects. Here, we show that highly crystalline MIL-100(Fe) and disordered Basolite® F300, with identical iron 1,3,5-benzenetricarboxylate composition, exhibit very divergent properties when used as a support for Pd nanoparticle deposition. While MIL-100(Fe) shows a regular MTN-zeotype crystal structure with two types of cages, Basolite® F300 lacks long-range order beyond 8â Å and has a single-pore system. The medium-range configurational linker-node disorder in Basolite® F300 results in a reduced number of Lewis acid sites, yielding more hydrophobic surface properties compared to hydrophilic MIL-100(Fe). The hydrophilic/hydrophobic nature of MIL-100(Fe) and Basolite® F300 impacts the amount of Pd and particle size distribution of Pd nanoparticles deposited during colloidal synthesis and dry impregnation methods, respectively. It is suggested that polar (apolar) solvents/precursors attractively interact with hydrophilic (hydrophobic) MOF surfaces, allowing tools at hand to increase the level of control over, for example, the nanoparticle size distribution.
RESUMO
A novel microporous metal-organic framework, {[Pb4(µ8-MTB)2(H2O)4]·5DMF·H2O}n (1; MTB = methanetetrabenzoate and DMF = N,N'-dimethylformamide), was successfully synthesized by a solvothermal reaction and structurally characterized by single-crystal X-ray diffraction. The framework exhibits a unique tetranuclear [Pb4(µ3-COO)(µ2-COO)6(COO)(H2O)4] secondary building unit (SBU). The combination of the SBU with the tetrahedral symmetry of MTB results in a three-dimensional network structure, with one-dimensional jarlike cavities having sizes of about 14.98 × 7.88 and 14.98 × 13.17 Å2 and propagating along the c axis. Due to the presence of four coordinately unsaturated sites per one metal cluster, an activated form of compound 1 (i.e., desolvated form denoted as 1') was tested in gas adsorption and catalytic experiments. The studies of gas sorption revealed that 1' exhibits a surface area (Brunauer-Emmett-Teller) of 980 m2·g-1. This value is the highest reported for any compound from the MTB group. Interactions of carbon dioxide (CO2) molecules with the framework, confirmed by density functional theory calculations, resulted in high CO2 uptake and significant selectivity of CO2 adsorption with respect to methane (CH4) and dinitrogen (N2) when measured from atmospheric pressure to 21 bar. The high selectivity of CO2 over N2 is mostly important for capturing CO2 from the atmosphere in attempts to decrease the greenhouse effect. Moreover, compound 1' was tested as a heterogeneous catalyst in Knoevenagel condensation of active methylene compounds with aldehydes. Excellent catalytic conversion and selectivity in the condensation of benzaldehyde and cyclohexanecarbaldehyde with malononitrile was observed, which suggests that accessible lead(II) sites play an important role in the heterogeneous catalytic process.
RESUMO
We report a new type of structural transformation occurring in methane adsorbed in micropores. The observed methane structures are defined by probability distributions of molecular positions. The mechanism of the transformation has been modeled using Monte Carlo method. The transformation is totally determined by a reconstruction of the probability distribution functions of adsorbed molecules. The methane molecules have some freedom to move in the pore but most of the time they are confined to the positions around the high probability adsorption sites. The observed high-probability structures evolve as a function of temperature and pressure. The transformation is strongly discontinuous at low temperature and becomes continuous at high temperature. The mechanism of the transformation is influenced by a competition between different components of the interaction and the thermal energy. The methane structure represents a new state of matter, intermediate between solid and liquid.
RESUMO
As the search for functionalized materials for CO2 capture continues, the role of theoretical chemistry is becoming more and more central. In this work, a strategy is proposed where ab initio calculations are compared and validated by adsorption microcalorimetry experiments for a series of, so far unexplored, functionalized SBA-15 silicas with different spacers (aryl, alkyl) and terminal functions (N3, NO2). This validation then permitted to propose the use of a nitro-indole surface functionality. After synthesis of such a material the predictions were confirmed by experiment. This confirms that it is possible to fine-tune CO2-functional interactions at energies much lower than those observed with amine species.
RESUMO
Molecular simulations were performed to predict CO2 adsorption in flexible metal-organic frameworks (MOFs). A generic force field was fitted to our experimental data to describe the non-bonded (electrostatic and van der Waals) interactions between CO2 molecules and the large pore (lp) and narrow pore (np) forms of the MIL-53(Al) framework. With the new validated force field, it is possible to predict CO2 uptake and enthalpy of adsorption at various applied external pressures that will modify the structure's pore configuration and allow us to have more control over the adsorption/desorption process. A sensitivity analysis of MOF adsorption properties to the variation of the force field parameters was also intensively studied. It was shown that relatively small variations of the adsorbate gas model can improve the quality of the numerical predictions of the experimental data. However, the variations must be kept small enough to not modify the properties of the gas itself.
RESUMO
A simple laboratory-scale protocol that enables the evaluation of the effect of adsorbed water on CO2 uptake is proposed. 45 metal-organic frameworks (MOFs) were compared against reference zeolites and active carbons. It is possible to classify materials with different trends in CO2 uptake with varying amounts of pre-adsorbed water, including cases in which an increase in CO2 uptake is observed for samples with a given amount of pre-adsorbed water. Comparing loss in CO2 uptake between "wet" and "dry" samples with the Henry constant calculated from the water adsorption isotherm results in a semi-logarithmic trend for the majority of samples allowing predictions to be made. Outliers from this trend may be of particular interest and an explanation for the behaviour for each of the outliers is proposed. This thus leads to propositions for designing or choosing MOFs for CO2 capture in applications where humidity is present.
Assuntos
Dióxido de Carbono/química , Dióxido de Carbono/isolamento & purificação , Resíduos Industriais , Compostos Organometálicos/química , Vapor , Adsorção , CinéticaRESUMO
The aluminum fumarate MOF A520 or MIL-53-FA is revealed to be a promising material for mechanical energy-related applications with performances in terms of work and heat energies which surpass those of any porous solids reported so far. Complementary experimental and computational tools are deployed to finely characterize and understand the pressure-induced structural transition at the origin of these unprecedented levels of performance.