[Continuous Optimisation of Experimental Models - an Example from Glaucoma Research]. / Die kontinuierliche Optimierung von experimentellen Modellen ­ Darstellung an einem Beispiel aus der Glaukomforschung.

BACKGROUND: There is a great demand for suitable models to test novel surgical and therapeutic approaches in glaucoma therapy. To address this need and to provide further alternatives to in vivo animal models, we aimed at modifying an established in vitro porcine eye perfusion model. METHODS: Two weaknesses of the previously established porcine anterior segment model include media leakage during perfusion and setup disintegration due to mechanical instability. To overcome these, we slightly modified the previously used custom-made perfusion dishes and incorporated new components into the model setup. To prevent fluid leakage, we secured the anterior segments more firmly to the perfusion trays using a compression ring, steel screws, and nuts. Customised mounts were used to stabilise the perfusion dish and pressure transducer as a single unit. The mounts were made of polylactide (PLA) and printed using a 3D printer. RESULTS: The use of steel screws and nuts allowed tighter clamping of the anterior segments and prevented medium leakage. Our PLA custom mounts stabilised the entire assembly and facilitated handling during experiments and improved comparability between tested eyes. They also prevented accidental detachment of the pressure transducers, which resulted in more stable pressure curves. Our PLA mounts tolerated incubation temperatures of up to 37 °C and disinfection with enzymatic detergents and 70% ethanol without showing signs of deformation or degradation after four months of regular usage. CONCLUSION: Modifications introduced to an established in vitro perfusion model improved its efficacy and reproducibility. Our adjusted model is an example of how many models can be optimised through critical analysis, thereby saving resources and providing reliable results in the long run.