High yield electrosynthesis of oxygenates from CO using a relay Cu-Ag co-catalyst system.

As a sustainable alternative to fossil fuel-based manufacture of bulk oxygenates, electrochemical synthesis using CO and H2O as raw materials at ambient conditions offers immense appeal. However, the upscaling of the electrosynthesis of oxygenates encounters kinetic bottlenecks arising from the competing hydrogen evolution reaction with the selective production of ethylene. Herein, a catalytic relay system that can perform in tandem CO capture, activation, intermediate transfer and enrichment on a Cu-Ag composite catalyst is used for attaining high yield CO-to-oxygenates electrosynthesis at high current densities. The composite catalyst Cu/30Ag (molar ratio of Cu to Ag is 7:3) enables high efficiency CO-to-oxygenates conversion, attaining a maximum partial current density for oxygenates of 800 mA cm-2 at an applied current density of 1200 mA cm-2, and with 67 % selectivity. The ability to finely control the production of ethylene and oxygenates highlights the principle of efficient catalyst design based on the relay mechanism.

Molecularly thin, two-dimensional all-organic perovskites.

Recently, the emergence of all-organic perovskites with three-dimensional (3D) structures has expanded the potential applications of perovskite materials. However, the synthesis and utilization of all-organic perovskites in 2D form remain largely unexplored because the design principle has not been developed. We present the successful synthesis of a metal-free 2D layered perovskite, denoted as the Choi-Loh van der Waals phase (CL-v phase), with the chemical formula A2B2X4, where A represents a larger-sized cation compared to B and X denotes an anion. The CL-v phase exhibits a van der Waals gap enabled by interlayer hydrogen bonding and can be exfoliated or grown as molecularly thin 2D organic crystals. The dielectric constants of the CL-v phase range from 4.8 to 5.5 and we demonstrate their potential as gate dielectrics for thin-film transistors.

Beyond Conventional Charge Density Wave for Strongly Enhanced 2D Superconductivity in 1H-TaS2 Superlattices.

Noncentrosymmetric transition metal dichalcogenide (TMD) monolayers offer a fertile platform for exploring unconventional Ising superconductivity (SC) and charge density waves (CDWs). However, the vulnerability of isolated monolayers to structural disorder and environmental oxidation often degrade their electronic coherence. Herein, an alternative approach is reported for fabricating stable and intrinsic monolayers of 1H-TaS2 sandwiched between SnS blocks in a (SnS)1.15TaS2 van der Waals (vdW) superlattice. The SnS block layers not only decouple individual 1H-TaS2 sublayers to endow them with monolayer-like electronic characteristics, but also protect the 1H-TaS2 layers from electronic degradation. The results reveal the characteristic 3 × 3 CDW order in 1H-TaS2 sublayers associated with electronic rearrangement in the low-lying sulfur p band, which uncovers a previously undiscovered CDW mechanism rather than the conventional Fermi surface-related framework. Additionally, the (SnS)1.15TaS2 superlattice exhibits a strongly enhanced Ising-like SC with a layer-independent Tc of ≈3.0 K, comparable to that of the isolated monolayer 1H-TaS2 sample, presumably attributed to their monolayer-like characteristics and retained Fermi states. These results provide new insights into the long-debated CDW order and enhanced SC of monolayer 1H-TaS2, establishing bulk vdW superlattices as promising platforms for investigating exotic collective quantum phases in the 2D limit.

Nonlinear transport and radio frequency rectification in BiTeBr at room temperature.

Materials showing second-order nonlinear transport under time reversal symmetry can be used for Radio Frequency (RF) rectification, but practical application demands room temperature operation and sensitivity to microwatts level RF signals in the ambient. In this study, we demonstrate that BiTeBr exhibits a giant nonlinear response which persists up to 350 K. Through scaling and symmetry analysis, we show that skew scattering is the dominant mechanism. Additionally, the sign of the nonlinear response can be electrically switched by tuning the Fermi energy. Theoretical analysis suggests that the large Rashba spin-orbit interactions (SOI), which gives rise to the chirality of the Bloch electrons, provide the microscopic origin of the observed nonlinear response. Our BiTeBr rectifier is capable of rectifying radiation within the frequency range of 0.2 to 6 gigahertz at room temperature, even at extremely low power levels of -15 dBm, and without the need for external biasing. Our work highlights that materials exhibiting large Rashba SOI have the potential to exhibit nonlinear responses at room temperature, making them promising candidates for harvesting high-frequency and low-power ambient electromagnetic energy.

Ferroics in Hybrid Organic-Inorganic Perovskites: Fundamentals, Design Strategies, and Implementation.

Hybrid organic-inorganic perovskites (HOIPs) afford highly versatile structure design and lattice dimensionalities; thus, they are actively researched as material platforms for the tailoring of ferroic behaviors. Unlike single-phase organic or inorganic materials, the interlayer coupling between organic and inorganic components in HOIPs allows the modification of strain and symmetry by chirality transfer or lattice distortion, thereby enabling the coexistence of ferroic orders. This review focuses on the principles for engineering one or multiple ferroic orders in HOIPs, and the conditions for achieving multiferroicity and magnetoelectric properties. The prospects of multilevel ferroic modulation, chiral spin textures, and spin orbitronics in HOIPs are also presented.

Promoted Growth and Multiband Emission in Heterostructured Perovskites Through Cs+ -Sublattice Interaction.

Precise control of exciton confinement in metal halide perovskites is critical to the development of high-performance, stable optoelectronic devices. A significant hurdle is the swift completion of ionic metathesis reactions, often within seconds, making consistent control challenging. Herein, the introduction of different steric hindrances in a Cs+ sublattice within CsYb2 F7 is reported, which effectively modulates the reaction rate of Cs+ with lead (Pb2+ ) and halide ions in solution, extending the synthesis time for perovskite nanostructures to tens of minutes. Importantly, the Cs+ sublattice provides a crystal facet-dependent preference for perovskite growth and thus exciton confinement, allowing the simultaneous occurrence of up to six emission bands of CsPbBr3 . Moreover, the rigid CsYb2 F7 nano template offers high activation energy and enhances the stability of the resulting perovskite nanostructures. This methodology provides a versatile approach to synthesizing functional heterostructures. Its robustness is demonstrated by in-situ growth of perovskite nanostructures on Cs+ -mediated metal-organic frameworks.

In-Plane Ferrielectric Order in van der Waals ß'-In2Se3.

van der Waals ferroic materials exhibit rich potential for implementing future generation functional devices. Among these, layered ß'-In2Se3 has fascinated researchers with its complex superlattice and domain structures. As opposed to ferroelectric α-In2Se3, the understanding of ß'-In2Se3 ferroic properties remains unclear because ferroelectric, antiferroelectric, and ferroelastic characteristics have been separately reported in this material. To develop useful applications, it is necessary to understand the microscopic structural properties and their correlation with macroscopic device characteristics. Herein, using scanning transmission electron microscopy (STEM), we observed that the arrangement of dipoles deviates from the ideal double antiparallel antiferroelectric character due to competition between antiferroelectric and ferroelectric structural ordering. By virtue of second-harmonic generation, four-dimensional STEM, and in-plane piezoresponse force microscopy, the long-range inversion-breaking symmetry, uncompensated local polarization, and net polarization domains are unambiguously verified, revealing ß'-In2Se3 as an in-plane ferrielectric layered material. Additionally, our device study reveals analogous resistive switching behaviors of different types owing to polarization switching, defect migration, and defect-induced charge trapping/detrapping processes.

Heteroepitaxial Growth of Black Phosphorus on Tin Monosulfide.

Black phosphorus (Black P), a layered semiconductor with a layer-dependent bandgap and high carrier mobility, is a promising candidate for next-generation electronics and optoelectronics. However, the synthesis of large-area, layer-precise, single crystalline Black P films remains a challenge due to their high nucleation energy. Here, we report the molecular beam heteroepitaxy of single crystalline Black P films on a tin monosulfide (SnS) buffer layer grown on Au(100). The layer-by-layer growth mode enables the preparation of monolayer to trilayer films, with band gaps that reflect layer-dependent quantum confinement.

Ammonia Electrosynthesis from Nitrate Using a Ruthenium-Copper Cocatalyst System: A Full Concentration Range Study.

Electrochemical synthesis of ammonia via the nitrate reduction reaction (NO3RR) has been intensively researched as an alternative to the traditional Haber-Bosch process. Most research focuses on the low concentration range representative of the nitrate level in wastewater, leaving the high concentration range, which exists in nuclear and fertilizer wastes, unexplored. The use of a concentrated electrolyte (≥1 M) for higher rate production is hampered by poor hydrogen transfer kinetics. Herein, we demonstrate that a cocatalytic system of Ru/Cu2O catalyst enables NO3RR at 10.0 A in 1 M nitrate electrolyte in a 16 cm2 flow electrolyzer, with 100% faradaic efficiency toward ammonia. Detailed mechanistic studies by deuterium labeling and operando Fourier transform infrared (FTIR) spectroscopy allow us to probe the hydrogen transfer rate and intermediate species on Ru/Cu2O. Ab initio molecular dynamics (AIMD) simulations reveal that adsorbed hydroxide on Ru nanoparticles increases the density of the hydrogen-bonded water network near the Cu2O surface, which promotes the hydrogen transfer rate. Our work highlights the importance of engineering synergistic interactions in cocatalysts for addressing the kinetic bottleneck in electrosynthesis.

Gate-tunable anomalous Hall effect in Bernal tetralayer graphene.

Large spin-orbit coupling is often thought to be critical in realizing magnetic order-locked charge transport such as the anomalous Hall effect (AHE). Recently, artificial stacks of two-dimensional materials, e.g., magic-angle twisted bilayer graphene on hexagonal boron-nitride heterostructures and dual-gated rhombohedral trilayer graphene, have become platforms for realizing AHE without spin-orbit coupling. However, these stacking arrangements are not energetically favorable, impeding experiments and further device engineering. Here we report an anomalous Hall effect in Bernal-stacked tetralayer graphene devices (BTG), the most stable configuration of four-layer graphene. BTG AHE is switched on by a displacement field and is most pronounced at low carrier densities. The onset of AHE occurs in tandem with a full metal to a broken isospin transition indicating an orbital origin of the itinerant ferromagnetism. At lowest densities, BTG exhibits an unconventional hysteresis with step-like anomalous Hall plateaus. Persisting to several tens of kelvin, AHE in BTG demonstrates the ubiquity and robustness of magnetic order in readily available and stable multilayer Bernal graphene stacks-a new venue for intrinsic non-reciprocal responses.

Ion-Conductive Metallo-Covalent Organic Frameworks Constructed with Tridentate Ligand and Zn Nodes.

Metallo-covalent organic frameworks (metallo-COFs) are organometallic scaffolds in which covalently bonded organic frameworks are interwoven with metal-coordinated pendant groups. Unlike the rigid ligands traditionally used for metal coordination, the utilization of "soft" ligands allows for configurable topology and pore structure in metallo-COFs, particularly when the ligands are generated in situ during dynamic synthesis. In this study, we present the rational synthesis of metallo-COFs based on pyridine-2,6-diimine (pdi), wherein the incorporation of Zn2+ ions and in situ-generated tridentate ligands (pdi) yields metallo-COFs with a square-like lattice. In the absence of Zn2+ ions, a topological isomer COF with a Kagome lattice is instead produced. Thus, the presence or absence of Zn2+ ions allows us to switch between two distinct morphologies corresponding to metallo-COF or COF. In comparison to Brønsted acid-catalyzed COF, which necessitates postmetallization for loading metal ions, the metal-templated COF synthesis method yields COFs with improved crystallinity and approximately 1:1 [Zn2+]/ligand composition. Building upon the metal-templated COF synthesis approach, we successfully synthesized pdiCOF-Zn-2 and pdiCOF-Zn-3, which possess square-like and honeycomb lattices, respectively. The enhanced crystallinity and near 1:1 [Zn2+]/ligand composition of pdiCOF-Zn-3 (honeycomb) facilitate its application as ion transport channels.

Electron Spin Decoherence Dynamics in Magnetic Manganese Hybrid Organic-Inorganic Crystals: The Effect of Lattice Dimensionality.

Organic-inorganic metal hybrids with their tailorable lattice dimensionality and intrinsic spin-splitting properties are interesting material platforms for spintronic applications. While the spin decoherence process is extensively studied in lead- and tin-based hybrids, these systems generally show short spin decoherence lifetimes, and their correlation with the lattice framework is still not well-understood. Herein, we synthesized magnetic manganese hybrid single crystals of (4-fluorobenzylamine)2MnCl4, ((R)-3-fluoropyrrolidinium)MnCl3, and (pyrrolidinium)2MnCl4, which represent a change in lattice dimensionality from 2D and 1D to 0D, and studied their spin decoherence processes using continuous-wave electron spin resonance spectroscopy. All manganese hybrids exhibit nanosecond-scale spin decoherence time τ2 dominated by the symmetry-directed spin exchange interaction strengths of Mn2+-Mn2+ pairs, which is much longer than lead- and tin-based metal hybrids. In contrast to the similar temperature variation laws of τ2 in 2D and 0D structures, which first increase and gradually drop afterward, the 1D structure presents a monotonous rise of τ2 with the temperatures, indicating the strong correlation of spin decoherence with the lattice rigidity of the inorganic framework. This is also rationalized on the basis that the spin decoherence is governed by the competitive contributions from motional narrowing (prolonging the τ2) and electron-phonon coupling interaction (shortening the τ2), both of which are thermally activated, with the difference that the former is more pronounced in rigid crystalline lattices.

Interplay of the charge density wave transition with topological and superconducting properties.

Exotic phenomena due to the interplay of different quantum orders have been observed and the study of these phenomena has emerged as a new frontier in condensed matter research, especially in the two-dimensional limit. Here, we report the coexistence of charge density waves (CDWs), superconductivity, and nontrivial topology in monolayer 1H-MSe2 (M = Nb, Ta) triggered by momentum-dependent electron-phonon coupling through electron doping. At a critical electron doping concentration, new 2 × 2 CDW phases emerge with nontrivial topology, Dirac cones, and van Hove singularities. Interestingly, these 2 × 2 CDW phases are also superconducting. Our findings not only reveal a route towards realizing nontrivial electronic characters by CDW engineering, but also provide an exciting platform to modulate different quantum states at the confluence of CDWs, superconductivity, nontrivial topology, and electron-phonon coupling.

Near-90° Switch in the Polar Axis of Dion-Jacobson Perovskites by Halide Substitution.

Ferroelectricity in two-dimensional hybrid (2D) organic-inorganic perovskites (HOIPs) can be engineered by tuning the chemical composition of the organic or inorganic components to lower the structural symmetry and order-disorder phase change. Less efforts are made toward understanding how the direction of the polar axis is affected by the chemical structure, which directly impacts the anisotropic charge order and nonlinear optical response. To date, the reported ferroelectric 2D Dion-Jacobson (DJ) [PbI4]2- perovskites exhibit exclusively out-of-plane polarization. Here, we discover that the polar axis in ferroelectric 2D Dion-Jacobson (DJ) perovskites can be tuned from the out-of-plane (OOP) to the in-plane (IP) direction by substituting the iodide with bromide in the lead halide layer. The spatial symmetry of the nonlinear optical response in bromide and iodide DJ perovskites was probed by polarized second harmonic generation (SHG). Density functional theory calculations revealed that the switching of the polar axis, synonymous with the change in the orientation of the sum of the dipole moments (DMs) of organic cations, is caused by the conformation change of organic cations induced by halide substitution.

Polymorphism and Ferroelectricity in Indium(III) Selenide.

Two-dimensional indium(III) selenide (In2Se3) is characterized by rich polymorphism and offers the prospect of overcoming thickness-related depolarization effects in conventional ferroelectrics. α-In2Se3 has attracted attention as a ferroelectric semiconductor that can retain ferroelectricity at the monolayer level; thus, it can be potentially deployed in high density memory switching modes that bypasses the traditional von Neumann architecture in device design. However, studies involving α-In2Se3 are often hindered by difficulties in phase identification owing to mixing with ß-In2Se3. ß-In2Se3 has several polymorphs, among which include the antiferroelectric and ferroelastic ß'-In2Se3. It is important to understand polymorph transitions and crystal-amorphous phase transitions in ß-In2Se3 to tap into the potential of this material for resistive memory storage. In this review, we discuss how the various polymorphs and polytypes of In2Se3 can be rigorously differentiated and further highlight recent applications of these phases in ferroelectrics and memory devices.

2D Ferroionics: Conductive Switching Mechanisms and Transition Boundaries in Van der Waals Layered Material CuInP2 S6.

The recently unfolded ferroionic phenomena in 2D van der Waals (vdW) copper-indium-thiophosphate (CuInP2 S6 or CIPS) have received widespread interest as they allow for dynamic control of conductive switching properties, which are appealing in the paradigm-shift computing. The intricate couplings between ferroelectric polarization and ionic conduction in 2D vdW CIPS facilitate the manipulation and dynamic control of conductive behaviors. However, the complex interplays and underlying mechanisms are not yet fully explored and understood. Here, by investigating polarization switching and ionic conduction in the temperature and applied electric field domains, it is discovered that the conducting mechanisms of CIPS can be divided into four distinctive states (or modes) with transitional boundaries, depending on the dynamics of Cu ions in the material. Further, it demonstrates that dynamically-tunable synaptic responsive behavior can be well implemented by governing the working-state transition. This research provides an in-depth, quantitative understanding of the complex phenomena of conductive switching in 2D vdW CIPS with coexisting ferroelectric order and ionic disorder. The developed insights in this work lay the ground for implementing high-performance, function-enriched devices for information processing, data storage, and neuromorphic computing based on the 2D ferroionic material systems.

Ferroelectricity in Niobium Oxide Dihalides NbOX2 (X = Cl, I): A Macroscopic- to Microscopic-Scale Study.

2D materials with ferroelectric and piezoelectric properties are of interest for energy harvesting, memory storage and electromechanical systems. Here, we present a systematic study of the ferroelectric properties in NbOX2 (X = Cl, I) across different spatial scales. The in-plane ferroelectricity in NbOX2 was investigated using transport and piezoresponse force microscopy (PFM) measurements, where it was observed that NbOCl2 has a stronger ferroelectric order than NbOI2. A high local field, exerted by both PFM and scanning tunneling microscopy (STM) tips, was found to induce 1D collinear ferroelectric strips in NbOCl2. STM imaging reveals the unreconstructed atomic structures of NbOX2 surfaces, and scanning tunneling spectroscopy was used to probe the electronic states induced at defect (vacancy) sites.

Graphene oxide for photonics, electronics and optoelectronics.

Graphene oxide (GO) was initially developed to emulate graphene, but it was soon recognized as a functional material in its own right, addressing an application space that is not accessible to graphene and other carbon materials. Over the past decade, research on GO has made tremendous advances in material synthesis and property tailoring. These, in turn, have led to rapid progress in GO-based photonics, electronics and optoelectronics, paving the way for technological breakthroughs with exceptional performance. In this Review, we provide an overview of the optical, electrical and optoelectronic properties of GO and reduced GO on the basis of their chemical structures and fabrication approaches, together with their applications in key technologies such as solar energy harvesting, energy storage, medical diagnosis, image display and optical communications. We also discuss the challenges of this field, together with exciting opportunities for future technological advances.

Strain-Driven Solid-Solid Crystal Conversion in Chiral Hybrid Pseudo-Perovskites with Paramagnetic-to-Ferromagnetic Transition.

Hybrid organic-inorganic perovskites (HOIPs) are promising stimuli-responsive materials (SPMs) owing to their molecular softness and tailorable structural dimensionality. The design of mechanically responsive HOIPs requires an in-depth understanding of how lattice strain induces intermolecular rearrangement that impacts physical properties. While chirality transfer from an organic cation to an inorganic lattice is known to influence chiral-optical properties, its effect on strain-induced phase conversion has not been explored. As opposed to achiral or racemic organic cations, chiral organic cations can potentially afford a new dimension in strain-responsive structural change. Herein, we demonstrate that mechanical strain induces a solid phase crystal conversion in chiral halide pseudo-perovskite single crystals (R/S)-(FE)2CuCl4 (FE = (4-Fluorophenyl)ethylamine) from a 0D isolated CuCl4 tetrahedral to 1D corner-sharing CuFCl5 octahedral framework via the incorporation of Cu···F interaction and N-H···F hydrogen bonding. This strain-induced crystal-to-crystal conversion involves the connection of neighboring 0D CuCl4 tetrahedra via Cu2+-Cl--Cu2+ linkages as well as the incorporation of a F-terminated organic cation as one of the X atoms in BX6 octahedra, leading to a reduced band gap and paramagnetic-to-ferromagnetic conversion. Control experiments using nonchiral or racemic perovskite analogs show the absence of such solid phase conversion. To demonstrate pressure-sensitive properties, the 0D phase is dispersed in water-soluble poly(vinyl alcohol) (PVA) polymer, which can be applied to a large-scale pressure-induced array display on fibrous Spandex substrates via a screen-printing method.

Atomically Unveiling an Atlas of Polytypes in Transition-Metal Trihalides.

Transition-metal trihalides MX3 (M = Cr, Ru; X = Cl, Br, and I) belong to a family of novel two-dimensional (2D) magnets that can exhibit topological magnons and electromagnetic properties, thus affording great promises in next-generation spintronic devices. Rich magnetic ground states observed in the MX3 family are believed to be strongly correlated to the signature Kagome lattice and interlayer van der Waals coupling raised from distinct stacking orders. However, the intrinsic air instability of MX3 makes their direct atomic-scale analysis challenging. Therefore, information on the stacking-registry-dependent magnetism for MX3 remains elusive, which greatly hinders the engineering of desired phases. Here, we report a nondestructive transfer method and successfully realize an intact transfer of bilayer MX3, as evidenced by scanning transmission electron microscopy (STEM). After surveying hundreds of MX3 thin flakes, we provide a full spectrum of stacking orders in MX3 with atomic precision and calculated their associated magnetic ground states, unveiled by combined STEM and density functional theory (DFT). In addition to well-documented phases, we discover a new monoclinic C2/c phase in the antiferromagnetic (AFM) structure widely existing in MX3. Rich stacking polytypes, including C2/c, C2/m, R3̅, P3112, etc., provide rich and distinct magnetic ground states in MX3. Besides, a high density of strain soliton boundaries is consistently found in all MX3, combined with likely inverted structures, allowing AFM to ferromagnetic (FM) transitions in most MX3. Therefore, our study sheds light on the structural basis of diverse magnetic orders in MX3, paving the way for modulating magnetic couplings via stacking engineering.