One fungus, which genes? Development and assessment of universal primers for potential secondary fungal DNA barcodes.

The aim of this study was to assess potential candidate gene regions and corresponding universal primer pairs as secondary DNA barcodes for the fungal kingdom, additional to ITS rDNA as primary barcode. Amplification efficiencies of 14 (partially) universal primer pairs targeting eight genetic markers were tested across > 1 500 species (1 931 strains or specimens) and the outcomes of almost twenty thousand (19 577) polymerase chain reactions were evaluated. We tested several well-known primer pairs that amplify: i) sections of the nuclear ribosomal RNA gene large subunit (D1-D2 domains of 26/28S); ii) the complete internal transcribed spacer region (ITS1/2); iii) partial ß -tubulin II (TUB2); iv) γ-actin (ACT); v) translation elongation factor 1-α (TEF1α); and vi) the second largest subunit of RNA-polymerase II (partial RPB2, section 5-6). Their PCR efficiencies were compared with novel candidate primers corresponding to: i) the fungal-specific translation elongation factor 3 (TEF3); ii) a small ribosomal protein necessary for t-RNA docking; iii) the 60S L10 (L1) RP; iv) DNA topoisomerase I (TOPI); v) phosphoglycerate kinase (PGK); vi) hypothetical protein LNS2; and vii) alternative sections of TEF1α. Results showed that several gene sections are accessible to universal primers (or primers universal for phyla) yielding a single PCR-product. Barcode gap and multi-dimensional scaling analyses revealed that some of the tested candidate markers have universal properties providing adequate infra- and inter-specific variation that make them attractive barcodes for species identification. Among these gene sections, a novel high fidelity primer pair for TEF1α, already widely used as a phylogenetic marker in mycology, has potential as a supplementary DNA barcode with superior resolution to ITS. Both TOPI and PGK show promise for the Ascomycota, while TOPI and LNS2 are attractive for the Pucciniomycotina, for which universal primers for ribosomal subunits often fail.

High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications.

AIMS: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin-processing sector. METHODS AND RESULTS: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68.7-97.5% similarity with other Polyporale laccases. The three laccases (59.5-62.9 kDa with 7-10% carbohydrate content) had high redox potentials (0.72-0.75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75-78 degrees C and at pH 5-7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase-1-hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. CONCLUSIONS: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo- and pH stability, catalytic efficiency towards 2,2'-azino-bis-[3-ethylthiazoline-6-sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. SIGNIFICANCE AND IMPACT OF THE STUDY: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale-up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor-made enzymes.

Fungal tyrosinases: new prospects in molecular characteristics, bioengineering and biotechnological applications.

Tyrosinases are type-3 copper proteins involved in the initial step of melanin synthesis. These enzymes catalyse both the o-hydroxylation of monophenols and the subsequent oxidation of the resulting o-diphenols into reactive o-quinones, which evolve spontaneously to produce intermediates, which associate in dark brown pigments. In fungi, tyrosinases are generally associated with the formation and stability of spores, in defence and virulence mechanisms, and in browning and pigmentation. First characterized from the edible mushroom Agaricus bisporus because of undesirable enzymatic browning problems during postharvest storage, tyrosinases were found, more recently, in several other fungi with relevant insights into molecular and genetic characteristics and into reaction mechanisms, highlighting their very promising properties for biotechnological applications. The limit of these applications remains in the fact that native fungal tyrosinases are generally intracellular and produced in low quantity. This review compiles the recent data on biochemical and molecular properties of fungal tyrosinases, underlining their importance in the biotechnological use of these enzymes. Next, their most promising applications in food, pharmaceutical and environmental fields are presented and the bioengineering approaches used for the development of tyrosinase-overproducing fungal strains are discussed.

Characterization of a new tyrosinase from Pycnoporus species with high potential for food technological applications.

AIMS: Tyrosinase production by Pycnoporus cinnabarinus and Pycnoporus sanguineus was screened among 20 strains originating from various geographical areas, particularly from tropical environments. The tyrosinase from the most efficient strain was purified and characterized and tested for food additive applications. METHODS AND RESULTS: Monophenolase and diphenolase activities of tyrosinase were measured from cell lysate from the 20 Pycnoporus strains, for 8-10 days of cultivation. The strain P. sanguineus CBS 614.73 showed the highest productivity (45.4 and 163.6 U g(-1) protein per day for monophenolase and diphenolase respectively). P. sanguineus CBS 614.73 tyrosinase was purified from concentrated cell lysate, anion-exchange, size-exclusion and hydroxyapatite chromatography, with a final yield of 2% and a purification factor of 35-38. The pure enzyme was a monomere with a molecular mass of 45 kDa and it showed four isoforms or isoenzymes with pI between 4.5-5. No N-glycosylation was found. The N-terminal amino acid sequence was IVTGPVGGQTEGAPAPNR. The enzyme was shown to be almost fully active in a pH range of 6-7, in a large temperature range (30-70 degrees C), and was stable below 60 degrees C. The main kinetic constants were determined. The tyrosinase was able to convert p-tyrosol and p-coumaric acid into hydroxytyrosol and caffeic acid, respectively, and it could also catalyse the cross-linking formation of a model protein. CONCLUSIONS: Among the genus Pycnoporus, known for the production of laccase, the strain P. sanguineus CBS 614.73 was shown to produce one other phenoloxidase, a new monomeric tyrosinase with a specific activity of 30 and 84 U mg(-1) protein for monophenolase and diphenolase respectively. SIGNIFICANCE AND IMPACT OF THE STUDY: This study identified P. sanguineus CBS 614.73 as a potential producer of a tyrosinase which demonstrated effectiveness in the synthesis of antioxidant molecules and in protein cross-linking.

Overproduction of laccase by a monokaryotic strain of Pycnoporus cinnabarinus using ethanol as inducer.

AIMS: Laccase production by the monokaryotic strain Pycnoporus cinnabarinus ss3 was studied using ethanol as inducer in the culture medium. METHODS AND RESULTS: The effect of ethanol was tested at 10, 20, 30, 35 and 45 g l-1 and compared with that of ferulic acid, known until now as the most efficient inducer for laccase expression by P. cinnabarinus ss3. In the presence of 35 g l-1 ethanol, laccase activity (266 600 U l-1) and productivity (19 000 U l-1 day-1) were nine and fivefold higher compared with ferulic acid-induced cultures, and 155- and 65-fold higher compared with non-induced cultures, respectively. In vivo, ethanol added to the culture medium of P. cinnabarinus ss3 favoured a continuous and high expression of laccase gene. Under these conditions, P. cinnabarinus ss3 produced preferentially the isoenzyme LAC I. Ethanol added in vitro to the purified P. cinnabarinus ss3 laccase typically inhibited the enzymatic activity. CONCLUSIONS: In spite of an initial inhibitory effect on mycelial growth, ethanol was shown to be a very strong inducer for laccase expression by P. cinnabarinus ss3 allowing an average yield of 1-1.5 g l-1 laccase. SIGNIFICANCE AND IMPACT OF THE STUDY: This study identified P. cinnabarinus ss3 as an outstanding producer of laccase in the presence of ethanol as inducer. Ethanol is an inexpensive agricultural by-product and the process is simple to scale-up for industrial production.

Pycnoporus cinnabarinus laccases: an interesting tool for food or non-food applications.

The effects of the addition of ferulic acid and ethanol in P. cinnabarinus ss3 culture medium in fermentor were compared in 15-L fermentor. In the presence of 30 g l(-1) ethanol, laccase activity (270,000 U/L1) was 3-fold higher as compared with ferulic acid-induced cultures, and 150-fold higher as compared with non-induced cultures, respectively. High-quality flax pulp was bleached in a totally-chlorine free (TCF) sequence using a laccase-mediator system constituted by laccase from Pycnoporus cinnabarinus and 1-hydroxybenzotriazole (HBT) as mediator. Up to 90% delignification and strong brightness increase were attained after the laccase-mediator treatment followed by H2O2 bleaching. This TCF sequence was further improved by applying H2O2 under pressurized O2. In this way, up to 82% ISO brightness was obtained (compared with 37% in the initial pulp and 60% in the peroxide-bleached control) as well as very low kappa number. A positive evaluation of the laccase has been also performed in a food application. The colour of a tea-based beverage was significantly improved by incubating an infusion of green tea with the Pycnoporus laccase.

Shifting the biotransformation pathways of L-phenylalanine into benzaldehyde by Trametes suaveolens CBS 334.85 using HP20 resin.

AIMS: The biotransformation of L-phenylalanine into benzaldehyde (bitter almond aroma) was studied in the strain Trametes suaveolens CBS 334.85. METHODS AND RESULTS: Cultures of this fungus were carried out in the absence or in the presence of HP20 resin, a highly selective adsorbent for aromatic compounds. For the identification of the main catabolic pathways of L-phenylalanine, a control medium (without L-phenylalanine) was supplemented with each of the aromatic compounds, previously detected in the culture broth, as precursors. Trametes suaveolens CBS 334.85 was shown to biosynthesize benzyl and p-hydroxybenzyl derivatives, particularly benzaldehyde, and large amounts of 3-phenyl-1-propanol, benzyl and p-hydroxybenzyl alcohols as the products of both cinnamate and phenylpyruvate pathways. CONCLUSION: The addition of HP20 resin, made it possible to direct the catabolism of L- phenylalanine to benzaldehyde, the desired target compound, and to trap it before its transformation into benzyl alcohol. In these conditions, benzaldehyde production was increased 21-fold, from 33 to 710 mg l-1 corresponding to a molar yield of 31%. SIGNIFICANCE AND IMPACT OF THE STUDY: These results showed the good potential of Trametes suaveolens as a biotechnological agent to synthesize natural benzaldehyde which is one of the most important aromatic aldehydes used in the flavour industry.

Evidence of a new biotransformation pathway of p-coumaric acid into p-hydroxybenzaldehyde in Pycnoporus cinnabarinus.

Pycnoporus cinnabarinus MUCL39533 was shown to be able to convert p-coumaric acid into p-hydroxybenzaldehyde, a component of high organoleptic note present in natural vanilla aroma. Use of phospholipid-enriched medium led to high-density cultures of P. cinnabarinus, since dry mycelial biomass was increased three-fold as compared to glucose medium. In the presence of phospholipids, 155 mg l(-1) p-hydroxybenzaldehyde was produced as the major compound on culture day 13 with a molar yield of 26%. The degradation pathways of p-coumaric acid were investigated. Based on the different metabolites identified, an oxidative side-chain degradation pathway of p-coumaric acid conversion to p-hydroxybenzoic acid was suggested. This acid was further reduced to p-hydroxybenzaldehyde and p-hydroxybenzyl alcohol, or hydroxylated and reduced to protocatechyl derivatives. Additionally, a reductive pathway of p-coumaric acid with 3-(4-hydroxyphenyl)-propanol as the terminal product occurred.

Enhanced benzaldehyde formation by a monokaryotic strain of Pycnoporus cinnabarinus using a selective solid adsorbent in the culture medium.

A monokaryotic strain of the white-rot fungus Pycnoporus cinnabarinus was shown to produce, in a 2-L bioreactor culture, 100 mg.L-1 benzaldehyde (bitter almond aroma) from L-phenylalanine with a productivity of 33 mg.L-1.day-1. The addition of HP20 resin, a styrene divinylbenzene copolymer highly selective for benzaldehyde, enabled an eightfold increase in the production of benzaldehyde and a twofold increase in productivity. In the presence of HP20 resin, the production of 790 mg.L-1 benzaldehyde was concomitant with the synthesis of cinnamic acid derivatives of high organoleptic notes such as cinnamaldehyde, cinnamyl alcohol, and methyl cinnamate.

Basidiomycetes as new biotechnological tools to generate natural aromatic flavours for the food industry

Consumer preference for natural food additives has led to an increasing demand for natural aromatic compounds. An alternative production process to plant and chemical sources is the use of biotechnological methods involving microorganisms, which ensure a stable supply, quality and price. Among filamentous fungi, white-rot basidiomycetes represent an important group that generate a wide range of flavouring compounds, particularly aromatic molecules. Their biotechnological potential to produce natural aromatic flavours de novo or by biotransformation thus presents a very interesting challenge.

Study of the delta 12-desaturase system of Lipomyces starkeyi.

The specific activity of the microsomal delta 12-desaturase system, which transforms oleic acid into linoleic acid, was about 16 pmol/min/mg protein. However, most of the total activity was nonsedimentable even after a 200000 x g centrifugation for 100 min. The study of various physicochemical parameters showed that this enzymatic complex, functioning optimally between pH 7 and 8, had low thermal stability. Ca2+ which may cause an aggregation of the microsomes, and Hg2+ completely inhibited the activity, whereas Mg2+, Mn2+, and Zn2+ were activators. The delta 12-desaturase system was relatively specific toward oleic acid, though isomers of this fatty acid also had an action, either as substrates or as competitive inhibitors, on the activity of the system. The study of the effect of the exogenous oleoyl-CoA and elaidoyl-CoA on the specific activity of the delta 12-desaturase system showed a preference toward oleoyl-CoA.